Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adding ACCESS REG mlx4 command and use it to implement Query method for
PTYS (Port Type and Speed Register).
Query and store eth_prot_ctrl dev cap.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Added new MAD_IFC command to read cable module info with attribute id (0xFF60).
Update include/linux/mlx4/device.h with function declaration (mlx4_get_module_info)
and the needed defines/enums for future use.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Do not add phy include to the board file but platform_data include
instead.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The PXA168 Ethernet IP support MII and RMII connection to its PHY.
Currently, pxa168 platform_data does not provide a way to pass that
and there is one user of pxa168 platform_data (mach-mmp/gplug).
Given the pinctrl settings of gplug it uses RMII, so add and pass
a corresponding phy_interface_t.
Tested-by: NAntoine Ténart <antoine.tenart@free-electrons.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Marvell 88E3016 is a FastEthernet PHY that also can be found in Marvell
Berlin SoCs as integrated PHY.
Tested-by: NAntoine Ténart <antoine.tenart@free-electrons.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add ndo_gso_check which a device can define to indicate whether is
is capable of doing GSO on a packet. This funciton would be called from
the stack to determine whether software GSO is needed to be done. A
driver should populate this function if it advertises GSO types for
which there are combinations that it wouldn't be able to handle. For
instance a device that performs UDP tunneling might only implement
support for transparent Ethernet bridging type of inner packets
or might have limitations on lengths of inner headers.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

as users have been converted, so no need of this custom method
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The freescale driver uses custom device control FSLDMA_EXTERNAL_START to
put the controller in external start mode.
Since we are planning to deprecate the device control, move this to exported
API. Subsequent patches will remove the FSLDMA_EXTERNAL_START
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This was only prep API which didnt have an helper
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The driver library functions can be used directly by the compound devices such
as ADSP or serial driver where DesignWare DMA IP is privately attached to the
main hardware.

Instead of creating a new platform device leaf they may call dw_dma_probe()
with given struct dw_dma_chip directly and make sure that the main device is
DMA capable.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The introduced include/linux/dma/dw.h is going to contain the private
extensions and structures which are shared for dw_dmac users in the kernel.
Meanwhile include/linux/platform_data/dma-dw.h keeps only platform related data
types and definitions.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Since we don't allow user to set registers directly through private slave
configuration we may move definitions to the regs.h because they are not used
anywhere except core.c part.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

virtio spec 0.9.X requires DRIVER_OK to be set before
VQs are used, but some drivers use VQs before probe
function returns.
Since DRIVER_OK is set after probe, this violates the spec.

Even though under virtio 1.0 transitional devices support this
behaviour, we want to make it possible for those early callers to become
spec compliant and eventually support non-transitional devices.

Add API for drivers to call before using VQs.

Sets DRIVER_OK internally.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Defer config changed notifications that arrive during
probe/scan/freeze/restore.

This will allow drivers to set DRIVER_OK earlier, without worrying about
racing with config change interrupts.

This change will also benefit old hypervisors (before 2009)
that send interrupts without checking DRIVER_OK: previously,
the callback could race with driver-specific initialization.

This will also help simplify drivers.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (cosmetic changes)

This is in preparation to extending config changed event handling
in core.
Wrapping these in an API also seems to make for a cleaner code.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Replace duplicated code in all transports with a single wrapper in
virtio.c.

The only functional change is in virtio_mmio.c: if a buggy device sends
us an interrupt before driver is set, we previously returned IRQ_NONE,
now we return IRQ_HANDLED.

As this must not happen in practice, this does not look like a big deal.

See also commit 3fff0179
	virtio-pci: do not oops on config change if driver not loaded.
for the original motivation behind the driver check.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Resolve "logical 'and' applied to non-boolean constant" warnings"
that appear in W=2 builds by adding !! to a bit test.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Bring in missing osd ops and strings, use macros to eliminate multiple
points of maintenance.
Signed-off-by: NIlya Dryomov <idryomov@redhat.com>
Reviewed-by: NSage Weil <sage@redhat.com>

ceph_release_page_vector was defined twice in libceph.h
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NIlya Dryomov <idryomov@redhat.com>

this allow pagelist to present data that may be sent multiple times.
Signed-off-by: NYan, Zheng <zyan@redhat.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Function capi20_manufacturer() is declared with unsigned int cmd
argument but called with unsigned long.
Fix by correcting the function prototype since the actual argument
is part of the user visible API.

Spotted with Coverity.
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the skb is not dropped afterwards we should run consume_skb instead
kfree_skb. Inside of function skb_unshare we do always a kfree_skb,
doesn't depend if skb_copy failed or was successful.

This patch switch this behaviour like skb_share_check, if allocation of
sk_buff failed we use kfree_skb otherwise consume_skb.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

REQ_KERNEL is no longer used. Remove it and drop the redundant uio
argument to nfs_file_direct_{read,write}.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

For VMAs that don't want write notifications, PTEs created for read faults
have their write bit set.  If the read fault happens after VM_SOFTDIRTY is
cleared, then the PTE's softdirty bit will remain clear after subsequent
writes.

Here's a simple code snippet to demonstrate the bug:

  char* m = mmap(NULL, getpagesize(), PROT_READ | PROT_WRITE,
                 MAP_ANONYMOUS | MAP_SHARED, -1, 0);
  system("echo 4 > /proc/$PPID/clear_refs"); /* clear VM_SOFTDIRTY */
  assert(*m == '\0');     /* new PTE allows write access */
  assert(!soft_dirty(x));
  *m = 'x';               /* should dirty the page */
  assert(soft_dirty(x));  /* fails */

With this patch, write notifications are enabled when VM_SOFTDIRTY is
cleared.  Furthermore, to avoid unnecessary faults, write notifications
are disabled when VM_SOFTDIRTY is set.

As a side effect of enabling and disabling write notifications with
care, this patch fixes a bug in mprotect where vm_page_prot bits set by
drivers were zapped on mprotect.  An analogous bug was fixed in mmap by
commit c9d0bf24 ("mm: uncached vma support with writenotify").
Signed-off-by: NPeter Feiner <pfeiner@google.com>
Reported-by: NPeter Feiner <pfeiner@google.com>
Suggested-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Jamie Liu <jamieliu@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Consolidate the various external const and non-const declarations of
__start___param[] and __stop___param in <linux/moduleparam.h>.  This
requires making a few struct kernel_param pointers in kernel/params.c
const.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In some cases we don't want hard lockup detection enabled by default.
An example is when running as a guest.  Introduce

  watchdog_enable_hardlockup_detector(bool)

allowing those cases to disable hard lockup detection.  This must be
executed early by the boot processor from e.g.  smp_prepare_boot_cpu, in
order to allow kernel command line arguments to override it, as well as
to avoid hard lockup detection being enabled before we've had a chance
to indicate that it's unwanted.  In summary,

  initial boot:					default=enabled
  smp_prepare_boot_cpu
    watchdog_enable_hardlockup_detector(false):	default=disabled
  cmdline has 'nmi_watchdog=1':			default=enabled

The running kernel still has the ability to enable/disable at any time
with /proc/sys/kernel/nmi_watchdog us usual.  However even when the
default has been overridden /proc/sys/kernel/nmi_watchdog will initially
show '1'.  To truly turn it on one must disable/enable it, i.e.

  echo 0 > /proc/sys/kernel/nmi_watchdog
  echo 1 > /proc/sys/kernel/nmi_watchdog

This patch will be immediately useful for KVM with the next patch of this
series.  Other hypervisor guest types may find it useful as well.

[akpm@linux-foundation.org: fix build]
[dzickus@redhat.com: fix compile issues on sparc]
Signed-off-by: NUlrich Obergfell <uobergfe@redhat.com>
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is almost the opposite function to string_unescape().  Nevertheless
it handles \0 and could be used for any byte buffer.

The documentation is supplied together with the function prototype.

The test cases covers most of the scenarios and would be expanded later
on.

[akpm@linux-foundation.org: avoid 1k stack consumption]
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "John W . Linville" <linville@tuxdriver.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The introduced function string_escape_mem() is a kind of opposite to
string_unescape.  We have several users of such functionality each of
them created custom implementation.  The series contains clean up of
test suite, adding new call, and switching few users to use it via %*pE
specifier.

Test suite covers all of existing and most of potential use cases.

This patch (of 11):

The documentation of API belongs to c-file.  This patch moves it
accordingly.

There is no functional change.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "John W . Linville" <linville@tuxdriver.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove obsolete and unused strict_strto* functions
Signed-off-by: NDaniel Walter <dwalter@google.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The previous patch made strnicmp into a wrapper for strncasecmp.

This patch makes all in-tree users of strnicmp call strncasecmp
directly, while still making sure that the strnicmp symbol can be used
by out-of-tree modules.  It should be considered a temporary hack until
all in-tree callers have been converted.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have a large university system in the UK that is experiencing very long
delays modprobing the driver for a specific I/O device.  The delay is from
8-10 minutes per device and there are 31 devices in the system.  This 4 to
5 hour delay in starting up those I/O devices is very much a burden on the
customer.

There are two causes for requiring a restart/reload of the drivers.  First
is periodic preventive maintenance (PM) and the second is if any of the
devices experience a fatal error.  Both of these trigger this excessively
long delay in bringing the system back up to full capability.

The problem was tracked down to a very slow IOREMAP operation and the
excessively long ioresource lookup to insure that the user is not
attempting to ioremap RAM.  These patches provide a speed up to that
function.

The modprobe time appears to be affected quite a bit by previous activity
on the ioresource list, which I suspect is due to cache preloading.  While
the overall improvement is impacted by other overhead of starting the
devices, this drastically improves the modprobe time.

Also our system is considerably smaller so the percentages gained will not
be the same.  Best case improvement with the modprobe on our 20 device
smallish system was from 'real 5m51.913s' to 'real 0m18.275s'.

This patch (of 2):

Since the ioremap operation is verifying that the specified address range
is NOT RAM, it will search the entire ioresource list if the condition is
true.  To make matters worse, it does this one 4k page at a time.  For a
128M BAR region this is 32 passes to determine the entire region does not
contain any RAM addresses.

This patch provides another resource lookup function, region_is_ram, that
searches for the entire region specified, verifying that it is completely
contained within the resource region.  If it is found, then it is checked
to be RAM or not, within a single pass.

The return result reflects if it was found or not (-1), and whether it is
RAM (1) or not (0).  This allows the caller to fallback to the previous
page by page search if it was not found.

[akpm@linux-foundation.org: fix spellos and typos in comment]
Signed-off-by: NMike Travis <travis@sgi.com>
Acked-by: NAlex Thorlton <athorlton@sgi.com>
Reviewed-by: NCliff Wickman <cpw@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The comment is copied from Documentation/rbtree.txt, but this comment is
so important that it should also be in the code.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NMichel Lespinasse <walken@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In locate_mem_hole functions, a memory hole is located and added as
kexec_segment.  But from the name of locate_mem_hole, it should only take
responsibility of searching a available memory hole to contain data of a
specified size.

So in this patch add a new field 'mem' into kexec_buf, then take that
kexec segment adding code out of locate_mem_hole_top_down and
locate_mem_hole_bottom_up.  This make clear of the functionality of
locate_mem_hole just like it declars to do.  And by this
locate_mem_hole_callback chould be used later if anyone want to locate a
memory hole for other use.

Meanwhile Vivek suggested opening code function __kexec_add_segment(),
that way we have to retreive ksegment pointer once and it is easy to read.
 So just do it in this patch and remove __kexec_add_segment() since no one
use it anymore.
Signed-off-by: NBaoquan He <bhe@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Kill _NSIG_WORDS_is_unsupported_size(), use BUILD_BUG() instead.  This
simplifies the code, avoids the nested-externs warnings, and this way we
do not defer the problem to linker.

Also, fix the indentation in _SIG_SET_BINOP() and _SIG_SET_OP().

Note: this patch assumes that the code like "if (0) BUILD_BUG();" is
valid.  If not (say __compiletime_error() is not defined and thus
__compiletime_error_fallback() uses a negative array) we should fix
BUILD_BUG() and/or BUILD_BUG_ON_MSG().  This code should be fine by
definition, this is the documented purpose of BUILD_BUG().

[sfr@canb.auug.org.au: fix powerpc build failures]
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reported-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The prio_heap code is unused since commit 889ed9ce ("cgroup: remove
css_scan_tasks()").  It should be compiled out to shrink the binary
kernel size which can be done via introducing CONFIG_PRIO_HEAD or by
removing the code.

We can simply recover the code from git when needed, so it would be
better to remove it IMO.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NTejun Heo <tj@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Francesco Fusco <ffusco@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: George Spelvin <linux@horizon.com>
Cc: Mark Salter <msalter@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

linux/list.h uses container_of, therefore it depends on linux/kernel.h.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a function to create CMA region from previously reserved memory and
add support for handling 'shared-dma-pool' reserved-memory device tree
nodes.

Based on previous code provided by Josh Cartwright <joshc@codeaurora.org>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Josh Cartwright <joshc@codeaurora.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We're missing include/linux/compiler-gcc5.h which is required now
because gcc branched off to v5 in trunk.

Just copy the relevant bits out of include/linux/compiler-gcc4.h,
no new code is added as of now.

This fixes a build error when using gcc 5.
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>