Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 27 3月, 2020 9 次提交
  3. 26 3月, 2020 5 次提交
    • M
      ahci: Add Intel Comet Lake PCH-V PCI ID · 58c42b0b
      由 Mika Westerberg 提交于 
      Add Intel Comet Lake PCH-V PCI ID to the list of supported controllers.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      58c42b0b
    • M
      ahci: Add Intel Comet Lake PCH-H PCI ID · 5e125d13
      由 Mika Westerberg 提交于 
      Add Intel Comet Lake PCH-H PCI ID to the list of supported controllers.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      5e125d13
    • L
      libata: Assign OF node to the SCSI device · 45b8084f
      由 Linus Walleij 提交于 
      When we spawn a SCSI device from an ATA device in libata-scsi
the SCSI device had no relation to the device tree.

The DT binding allows us to define port nodes under a
PATA (IDE) or SATA host controller, so we can have proper device
nodes for these devices.

If OF is enabled, walk the children of the host controller node
to see if there is a valid device tree node to assign. The reg
is used to match to ID 0 for the master device and ID 1 for the
slave device.

The corresponding device tree bindings have been accepted by
the device tree maintainers.

Cc: Chris Healy <cphealy@gmail.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      45b8084f
    • J
      libata: Remove extra scsi_host_put() in ata_scsi_add_hosts() · 1d72f7ae
      由 John Garry 提交于 
      If the call to scsi_add_host_with_dma() in ata_scsi_add_hosts() fails,
then we may get use-after-free KASAN warns:

==================================================================
BUG: KASAN: use-after-free in kobject_put+0x24/0x180
Read of size 1 at addr ffff0026b8c80364 by task swapper/0/1
CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W         5.6.0-rc3-00004-g5a71b206ea82-dirty #1765
Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDD, BIOS 2280-V2 CS V3.B160.01 02/24/2020
Call trace:
dump_backtrace+0x0/0x298
show_stack+0x14/0x20
dump_stack+0x118/0x190
print_address_description.isra.9+0x6c/0x3b8
__kasan_report+0x134/0x23c
kasan_report+0xc/0x18
__asan_load1+0x5c/0x68
kobject_put+0x24/0x180
put_device+0x10/0x20
scsi_host_put+0x10/0x18
ata_devres_release+0x74/0xb0
release_nodes+0x2d0/0x470
devres_release_all+0x50/0x78
really_probe+0x2d4/0x560
driver_probe_device+0x7c/0x148
device_driver_attach+0x94/0xa0
__driver_attach+0xa8/0x110
bus_for_each_dev+0xe8/0x158
driver_attach+0x30/0x40
bus_add_driver+0x220/0x2e0
driver_register+0xbc/0x1d0
__pci_register_driver+0xbc/0xd0
ahci_pci_driver_init+0x20/0x28
do_one_initcall+0xf0/0x608
kernel_init_freeable+0x31c/0x384
kernel_init+0x10/0x118
ret_from_fork+0x10/0x18

Allocated by task 5:
save_stack+0x28/0xc8
__kasan_kmalloc.isra.8+0xbc/0xd8
kasan_kmalloc+0xc/0x18
__kmalloc+0x1a8/0x280
scsi_host_alloc+0x44/0x678
ata_scsi_add_hosts+0x74/0x268
ata_host_register+0x228/0x488
ahci_host_activate+0x1c4/0x2a8
ahci_init_one+0xd18/0x1298
local_pci_probe+0x74/0xf0
work_for_cpu_fn+0x2c/0x48
process_one_work+0x488/0xc08
worker_thread+0x330/0x5d0
kthread+0x1c8/0x1d0
ret_from_fork+0x10/0x18

Freed by task 5:
save_stack+0x28/0xc8
__kasan_slab_free+0x118/0x180
kasan_slab_free+0x10/0x18
slab_free_freelist_hook+0xa4/0x1a0
kfree+0xd4/0x3a0
scsi_host_dev_release+0x100/0x148
device_release+0x7c/0xe0
kobject_put+0xb0/0x180
put_device+0x10/0x20
scsi_host_put+0x10/0x18
ata_scsi_add_hosts+0x210/0x268
ata_host_register+0x228/0x488
ahci_host_activate+0x1c4/0x2a8
ahci_init_one+0xd18/0x1298
local_pci_probe+0x74/0xf0
work_for_cpu_fn+0x2c/0x48
process_one_work+0x488/0xc08
worker_thread+0x330/0x5d0
kthread+0x1c8/0x1d0
ret_from_fork+0x10/0x18

There is also refcount issue, as well:
WARNING: CPU: 1 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0xf8/0x170

The issue is that we make an erroneous extra call to scsi_host_put()
for that host:

So in ahci_init_one()->ata_host_alloc_pinfo()->ata_host_alloc(), we setup
a device release method - ata_devres_release() - which intends to release
the SCSI hosts:

static void ata_devres_release(struct device *gendev, void *res)
{
	...
	for (i = 0; i < host->n_ports; i++) {
		struct ata_port *ap = host->ports[i];

		if (!ap)
			continue;

		if (ap->scsi_host)
			scsi_host_put(ap->scsi_host);

	}
	...
}

However in the ata_scsi_add_hosts() error path, we also call
scsi_host_put() for the SCSI hosts.

Fix by removing the the scsi_host_put() calls in ata_scsi_add_hosts() and
leave this to ata_devres_release().

Fixes: f3187195 ("libata: separate out ata_host_alloc() and ata_host_register()")
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      1d72f7ae
    • K
      ahci: Add Intel Comet Lake H RAID PCI ID · 32d25454
      由 Kai-Heng Feng 提交于 
      Add the PCI ID to the driver list to support this new device.

Cc: stable@vger.kernel.org
Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      32d25454
  5. 12 3月, 2020 2 次提交
  7. 07 3月, 2020 1 次提交
    • Z
      vgacon: Fix a UAF in vgacon_invert_region · 513dc792
      由 Zhang Xiaoxu 提交于 
      When syzkaller tests, there is a UAF:
  BUG: KASan: use after free in vgacon_invert_region+0x9d/0x110 at addr
    ffff880000100000
  Read of size 2 by task syz-executor.1/16489
  page:ffffea0000004000 count:0 mapcount:-127 mapping:          (null)
  index:0x0
  page flags: 0xfffff00000000()
  page dumped because: kasan: bad access detected
  CPU: 1 PID: 16489 Comm: syz-executor.1 Not tainted
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
  Call Trace:
    [<ffffffffb119f309>] dump_stack+0x1e/0x20
    [<ffffffffb04af957>] kasan_report+0x577/0x950
    [<ffffffffb04ae652>] __asan_load2+0x62/0x80
    [<ffffffffb090f26d>] vgacon_invert_region+0x9d/0x110
    [<ffffffffb0a39d95>] invert_screen+0xe5/0x470
    [<ffffffffb0a21dcb>] set_selection+0x44b/0x12f0
    [<ffffffffb0a3bfae>] tioclinux+0xee/0x490
    [<ffffffffb0a1d114>] vt_ioctl+0xff4/0x2670
    [<ffffffffb0a0089a>] tty_ioctl+0x46a/0x1a10
    [<ffffffffb052db3d>] do_vfs_ioctl+0x5bd/0xc40
    [<ffffffffb052e2f2>] SyS_ioctl+0x132/0x170
    [<ffffffffb11c9b1b>] system_call_fastpath+0x22/0x27
    Memory state around the buggy address:
     ffff8800000fff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00
     00 00
     ffff8800000fff80: 00 00 00 00 00 00 00 00 00 00 00 00 00
     00 00 00
    >ffff880000100000: ff ff ff ff ff ff ff ff ff ff ff ff ff
     ff ff ff

It can be reproduce in the linux mainline by the program:
  #include <stdio.h>
  #include <stdlib.h>
  #include <unistd.h>
  #include <fcntl.h>
  #include <sys/types.h>
  #include <sys/stat.h>
  #include <sys/ioctl.h>
  #include <linux/vt.h>

  struct tiocl_selection {
    unsigned short xs;      /* X start */
    unsigned short ys;      /* Y start */
    unsigned short xe;      /* X end */
    unsigned short ye;      /* Y end */
    unsigned short sel_mode; /* selection mode */
  };

  #define TIOCL_SETSEL    2
  struct tiocl {
    unsigned char type;
    unsigned char pad;
    struct tiocl_selection sel;
  };

  int main()
  {
    int fd = 0;
    const char *dev = "/dev/char/4:1";

    struct vt_consize v = {0};
    struct tiocl tioc = {0};

    fd = open(dev, O_RDWR, 0);

    v.v_rows = 3346;
    ioctl(fd, VT_RESIZEX, &v);

    tioc.type = TIOCL_SETSEL;
    ioctl(fd, TIOCLINUX, &tioc);

    return 0;
  }

When resize the screen, update the 'vc->vc_size_row' to the new_row_size,
but when 'set_origin' in 'vgacon_set_origin', vgacon use 'vga_vram_base'
for 'vc_origin' and 'vc_visible_origin', not 'vc_screenbuf'. It maybe
smaller than 'vc_screenbuf'. When TIOCLINUX, use the new_row_size to calc
the offset, it maybe larger than the vga_vram_size in vgacon driver, then
bad access.
Also, if set an larger screenbuf firstly, then set an more larger
screenbuf, when copy old_origin to new_origin, a bad access may happen.

So, If the screen size larger than vga_vram, resize screen should be
failed. This alse fix CVE-2020-8649 and CVE-2020-8647.

Linus pointed out that overflow checking seems absent. We're saved by
the existing bounds checks in vc_do_resize() with rather strict
limits:

	if (cols > VC_RESIZE_MAXCOL || lines > VC_RESIZE_MAXROW)
		return -EINVAL;

Fixes: 0aec4867 ("[PATCH] SVGATextMode fix")
Reference: CVE-2020-8647 and CVE-2020-8649
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NZhang Xiaoxu <zhangxiaoxu5@huawei.com>
[danvet: augment commit message to point out overflow safety]
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304022429.37738-1-zhangxiaoxu5@huawei.com
      513dc792
  9. 06 3月, 2020 5 次提交
  11. 05 3月, 2020 18 次提交
    • J
      xen/blkfront: fix ring info addressing · 4ab50af6
      由 Juergen Gross 提交于 
      Commit 0265d6e8 ("xen/blkfront: limit allocated memory size to
actual use case") made struct blkfront_ring_info size dynamic. This is
fine when running with only one queue, but with multiple queues the
addressing of the single queues has to be adapted as the structs are
allocated in an array.

Fixes: 0265d6e8 ("xen/blkfront: limit allocated memory size to actual use case")
Reported-by: NSander Eikelenboom <linux@eikelenboom.it>
Tested-by: NSander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: NJuergen Gross <jgross@suse.com>
Acked-by: NRoger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20200305155129.28326-1-jgross@suse.comSigned-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
      4ab50af6
    • J
      xen/xenbus: fix locking · 2f69a110
      由 Juergen Gross 提交于 
      Commit 060eabe8 ("xenbus/backend: Protect xenbus callback with
lock") introduced a bug by holding a lock while calling a function
which might schedule.

Fix that by using a semaphore instead.

Fixes: 060eabe8 ("xenbus/backend: Protect xenbus callback with lock")
Signed-off-by: NJuergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200305100323.16736-1-jgross@suse.comReviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
      2f69a110
    • D
      xenbus: req->err should be updated before req->state · 8130b9d5
      由 Dongli Zhang 提交于 
      This patch adds the barrier to guarantee that req->err is always updated
before req->state.

Otherwise, read_reply() would not return ERR_PTR(req->err) but
req->body, when process_writes()->xb_write() is failed.
Signed-off-by: NDongli Zhang <dongli.zhang@oracle.com>
Link: https://lore.kernel.org/r/20200303221423.21962-2-dongli.zhang@oracle.comReviewed-by: NJulien Grall <jgrall@amazon.com>
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
      8130b9d5
    • D
      xenbus: req->body should be updated before req->state · 1b6a51e8
      由 Dongli Zhang 提交于 
      The req->body should be updated before req->state is updated and the
order should be guaranteed by a barrier.

Otherwise, read_reply() might return req->body = NULL.

Below is sample callstack when the issue is reproduced on purpose by
reordering the updates of req->body and req->state and adding delay in
code between updates of req->state and req->body.

[   22.356105] general protection fault: 0000 [#1] SMP PTI
[   22.361185] CPU: 2 PID: 52 Comm: xenwatch Not tainted 5.5.0xen+ #6
[   22.366727] Hardware name: Xen HVM domU, BIOS ...
[   22.372245] RIP: 0010:_parse_integer_fixup_radix+0x6/0x60
... ...
[   22.392163] RSP: 0018:ffffb2d64023fdf0 EFLAGS: 00010246
[   22.395933] RAX: 0000000000000000 RBX: 75746e7562755f6d RCX: 0000000000000000
[   22.400871] RDX: 0000000000000000 RSI: ffffb2d64023fdfc RDI: 75746e7562755f6d
[   22.405874] RBP: 0000000000000000 R08: 00000000000001e8 R09: 0000000000cdcdcd
[   22.410945] R10: ffffb2d6402ffe00 R11: ffff9d95395eaeb0 R12: ffff9d9535935000
[   22.417613] R13: ffff9d9526d4a000 R14: ffff9d9526f4f340 R15: ffff9d9537654000
[   22.423726] FS:  0000000000000000(0000) GS:ffff9d953bc80000(0000) knlGS:0000000000000000
[   22.429898] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   22.434342] CR2: 000000c4206a9000 CR3: 00000001ea3fc002 CR4: 00000000001606e0
[   22.439645] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   22.444941] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   22.450342] Call Trace:
[   22.452509]  simple_strtoull+0x27/0x70
[   22.455572]  xenbus_transaction_start+0x31/0x50
[   22.459104]  netback_changed+0x76c/0xcc1 [xen_netfront]
[   22.463279]  ? find_watch+0x40/0x40
[   22.466156]  xenwatch_thread+0xb4/0x150
[   22.469309]  ? wait_woken+0x80/0x80
[   22.472198]  kthread+0x10e/0x130
[   22.474925]  ? kthread_park+0x80/0x80
[   22.477946]  ret_from_fork+0x35/0x40
[   22.480968] Modules linked in: xen_kbdfront xen_fbfront(+) xen_netfront xen_blkfront
[   22.486783] ---[ end trace a9222030a747c3f7 ]---
[   22.490424] RIP: 0010:_parse_integer_fixup_radix+0x6/0x60

The virt_rmb() is added in the 'true' path of test_reply(). The "while"
is changed to "do while" so that test_reply() is used as a read memory
barrier.
Signed-off-by: NDongli Zhang <dongli.zhang@oracle.com>
Link: https://lore.kernel.org/r/20200303221423.21962-1-dongli.zhang@oracle.comReviewed-by: NJulien Grall <jgrall@amazon.com>
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
      1b6a51e8
    • G
      xen: Replace zero-length array with flexible-array member · e8dc73c9
      由 Gustavo A. R. Silva 提交于 
      The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200226212612.GA4663@embeddedorReviewed-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
      e8dc73c9
    • H
      drm/amdgpu/display: navi1x copy dcn watermark clock settings to smu resume from s3 (v2) · 09ed6ba4
      由 Hersen Wu 提交于 
       This interface is for dGPU Navi1x. Linux dc-pplib interface depends
 on window driver dc implementation.

 For Navi1x, clock settings of dcn watermarks are fixed. the settings
 should be passed to smu during boot up and resume from s3.
 boot up: dc calculate dcn watermark clock settings within dc_create,
 dcn20_resource_construct, then call pplib functions below to pass
 the settings to smu:
 smu_set_watermarks_for_clock_ranges
 smu_set_watermarks_table
 navi10_set_watermarks_table
 smu_write_watermarks_table

 For Renoir, clock settings of dcn watermark are also fixed values.
 dc has implemented different flow for window driver:
 dc_hardware_init / dc_set_power_state
 dcn10_init_hw
 notify_wm_ranges
 set_wm_ranges

 For Linux
 smu_set_watermarks_for_clock_ranges
 renoir_set_watermarks_table
 smu_write_watermarks_table

 dc_hardware_init -> amdgpu_dm_init
 dc_set_power_state --> dm_resume

 therefore, linux dc-pplib interface of navi10/12/14 is different
 from that of Renoir.

v2: add missing unlock in error case
Signed-off-by: NHersen Wu <hersenxs.wu@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
      09ed6ba4
    • P
      drm/amd/powerplay: map mclk to fclk for COMBINATIONAL_BYPASS case · ab65a371
      由 Prike Liang 提交于 
      When hit COMBINATIONAL_BYPASS the mclk will be bypass and can export
fclk frequency to user usage.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
      ab65a371
    • P
      drm/amd/powerplay: fix pre-check condition for setting clock range · 80381d40
      由 Prike Liang 提交于 
      This fix will handle some MP1 FW issue like as mclk dpm table in renoir has a reverse
dpm clock layout and a zero frequency dpm level as following case.

cat pp_dpm_mclk
0: 1200Mhz
1: 1200Mhz
2: 800Mhz
3: 0Mhz
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
      80381d40
    • J
      drm/amd/display: fix dcc swath size calculations on dcn1 · a0275dfc
      由 Josip Pavic 提交于 
      [Why]
Swath sizes are being calculated incorrectly. The horizontal swath size
should be the product of block height, viewport width, and bytes per
element, but the calculation uses viewport height instead of width. The
vertical swath size is similarly incorrectly calculated. The effect of
this is that we report the wrong DCC caps.

[How]
Use viewport width in the horizontal swath size calculation and viewport
height in the vertical swath size calculation.
Signed-off-by: NJosip Pavic <Josip.Pavic@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
      a0275dfc
    • B
      drm/amd/display: Clear link settings on MST disable connector · 5ac7fd2f
      由 Bhawanpreet Lakha 提交于 
      [Why]
If we have a single MST display and we disconnect it, we dont disable that
link. This causes the old link settings to still exist

Now on a replug for MST we think its a link loss and will try to reallocate
mst payload which will fail, throwing warning below.

[  129.374192] [drm] Failed to updateMST allocation table forpipe idx:0
[  129.374206] ------------[ cut here ]------------
[  129.374284] WARNING: CPU: 14 PID: 1710 at
drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/core/dc_link.c:3153
dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu]

[  129.374285] Modules linked in: amdgpu(OE) amd_iommu_v2 gpu_sched ttm
drm_kms_helper drm fb_sys_fops syscopyarea sysfillrect sysimgblt
binfmt_misc nls_iso8859_1 edac_mce_amd snd_hda_codec_realtek
snd_hda_codec_generic ledtrig_audio kvm snd_hda_codec_hdmi snd_hda_intel
snd_intel_nhlt snd_hda_codec irqbypass snd_hda_core snd_hwdep snd_pcm
snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul snd_seq
crc32_pclmul ghash_clmulni_intel snd_seq_device snd_timer snd aesni_intel
eeepc_wmi crypto_simd asus_wmi joydev cryptd sparse_keymap input_leds
soundcore video glue_helper wmi_bmof mxm_wmi k10temp ccp mac_hid
sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4
hid_generic usbhid hid igb i2c_algo_bit ahci dca i2c_piix4 libahci
gpio_amdpt wmi gpio_generic

[  129.374318] CPU: 14 PID: 1710 Comm: kworker/14:2 Tainted: G        W  OE     5.4.0-rc7bhawan+ #480
[  129.374318] Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 0515 03/30/2017
[  129.374397] Workqueue: events dm_irq_work_func [amdgpu]
[  129.374468] RIP: 0010:dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu]
[  129.374470] Code: 52 20 e8 1c 63 ad f4 48 8b 5d d0 65 48 33 1c 25 28 00
00 00 b8 01 00 00 00 75 16 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3
<0f> 0b e9 fa fe ff ff e8 ed 5b d6 f3 41 0f b6 b6 c4 02 00 00 48 c7
[  129.374471] RSP: 0018:ffff9f9141e7fcc0 EFLAGS: 00010246
[  129.374472] RAX: 0000000000000000 RBX: ffff91ef0762f800 RCX: 0000000000000000
[  129.374473] RDX: 0000000000000005 RSI: ffffffffc0c4a988 RDI: 0000000000000004
[  129.374474] RBP: ffff9f9141e7fd10 R08: 0000000000000005 R09: 0000000000000000
[  129.374475] R10: 0000000000000002 R11: 0000000000000001 R12: ffff91eebd510c00
[  129.374475] R13: ffff91eebd510e58 R14: ffff91ef052c01b8 R15: 0000000000000006
[  129.374476] FS:  0000000000000000(0000) GS:ffff91ef0ef80000(0000) knlGS:0000000000000000
[  129.374477] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  129.374478] CR2: 000055623ea01d50 CR3: 0000000408a8c000 CR4: 00000000003406e0
[  129.374479] Call Trace:
[  129.374550]  dc_link_reallocate_mst_payload+0x12e/0x150 [amdgpu]
[  129.374617]  dc_link_handle_hpd_rx_irq+0x6d4/0x6e0 [amdgpu]
[  129.374693]  handle_hpd_rx_irq+0x77/0x310 [amdgpu]
[  129.374768]  dm_irq_work_func+0x53/0x70 [amdgpu]
[  129.374774]  process_one_work+0x1fd/0x3f0
[  129.374776]  worker_thread+0x255/0x410
[  129.374778]  kthread+0x121/0x140
[  129.374780]  ? process_one_work+0x3f0/0x3f0
[  129.374781]  ? kthread_park+0x90/0x90
[  129.374785]  ret_from_fork+0x22/0x40

[How]
when we disable MST we should clear the cur link settings (lane_count=0 is
good enough). This will cause us to not reallocate payloads earlier than
expected and not throw the warning
Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
      5ac7fd2f
    • T
      drm/amdgpu: disable 3D pipe 1 on Navi1x · 194bcf35
      由 Tianci.Yin 提交于 
      [why]
CP firmware decide to skip setting the state for 3D pipe 1 for Navi1x as there
is no use case.

[how]
Disable 3D pipe 1 on Navi1x.
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Signed-off-by: NTianci.Yin <tianci.yin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
      194bcf35
    • L
      HID: hyperv: NULL check before some freeing functions is not needed. · 5313b2a5
      由 Lucas Tanure 提交于 
      Fix below warnings reported by coccicheck:
drivers/hid/hid-hyperv.c:197:2-7: WARNING: NULL check before some freeing functions is not needed.
drivers/hid/hid-hyperv.c:211:2-7: WARNING: NULL check before some freeing functions is not needed.
Signed-off-by: NLucas Tanure <tanure@linux.com>
Reviewed-by: NMichael Kelley <mikelley@microsoft.com>
Reviewed-by: NWei Liu <wei.liu@kernel.org>
Acked-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NWei Liu <wei.liu@kernel.org>
      5313b2a5
    • Y
      drm/amdgpu: clean wptr on wb when gpu recovery · 2ab7e274
      由 Yintian Tao 提交于 
      The TDR will be randomly failed due to compute ring
test failure. If the compute ring wptr & 0x7ff(ring_buf_mask)
is 0x100 then after map mqd the compute ring rptr will be
synced with 0x100. And the ring test packet size is also 0x100.
Then after invocation of amdgpu_ring_commit, the cp will not
really handle the packet on the ring buffer because rptr is equal to wptr.
Signed-off-by: NYintian Tao <yttao@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk Liu <Monk.Liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
      2ab7e274
    • B
      Revert "software node: Simplify software_node_release() function" · 7589238a
      由 Brendan Higgins 提交于 
      This reverts commit 3df85a1a.

The reverted commit says "It's possible to release the node ID
immediately when fwnode_remove_software_node() is called, no need to
wait for software_node_release() with that." However, releasing the node
ID before waiting for software_node_release() to be called causes the
node ID to be released before the kobject and the underlying sysfs
entry; this means there is a period of time where a sysfs entry exists
that is associated with an unallocated node ID.

Once consequence of this is that there is a race condition where it is
possible to call fwnode_create_software_node() with no parent node
specified (NULL) and have it fail with -EEXIST because the node ID that
was assigned is still associated with a stale sysfs entry that hasn't
been cleaned up yet.

Although it is difficult to reproduce this race condition under normal
conditions, it can be deterministically reproduced with the following
minconfig on UML:

CONFIG_KUNIT_DRIVER_PE_TEST=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_KOBJECT_RELEASE=y
CONFIG_KUNIT=y

Running the tests with this configuration causes the following failure:

<snip>
kobject: 'node0' ((____ptrval____)): kobject_release, parent (____ptrval____) (delayed 400)
	ok 1 - pe_test_uints
sysfs: cannot create duplicate filename '/kernel/software_nodes/node0'
CPU: 0 PID: 28 Comm: kunit_try_catch Not tainted 5.6.0-rc3-next-20200227 #14
<snip>
kobject_add_internal failed for node0 with -EEXIST, don't try to register things with the same name in the same directory.
kobject: 'node0' ((____ptrval____)): kobject_release, parent (____ptrval____) (delayed 100)
	# pe_test_uint_arrays: ASSERTION FAILED at drivers/base/test/property-entry-test.c:123
	Expected node is not error, but is: -17
	not ok 2 - pe_test_uint_arrays
<snip>
Reported-by: NHeidi Fahim <heidifahim@google.com>
Signed-off-by: NBrendan Higgins <brendanhiggins@google.com>
Reviewed-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: 5.3+ <stable@vger.kernel.org> # 5.3+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      7589238a
    • B
      RDMA/iwcm: Fix iwcm work deallocation · 810dbc69
      由 Bernard Metzler 提交于 
      The dealloc_work_entries() function must update the work_free_list pointer
while freeing its entries, since potentially called again on same list. A
second iteration of the work list caused system crash. This happens, if
work allocation fails during cma_iw_listen() and free_cm_id() tries to
free the list again during cleanup.

Fixes: 922a8e9f ("RDMA: iWARP Connection Manager.")
Link: https://lore.kernel.org/r/20200302181614.17042-1-bmt@zurich.ibm.com
Reported-by: syzbot+cb0c054eabfba4342146@syzkaller.appspotmail.com
Signed-off-by: NBernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
      810dbc69
    • B
      RDMA/siw: Fix failure handling during device creation · 12e5eef0
      由 Bernard Metzler 提交于 
      A failing call to ib_device_set_netdev() during device creation caused
system crash due to xa_destroy of uninitialized xarray hit by device
deallocation. Fixed by moving xarray initialization before potential
device deallocation.

Fixes: bdcf26bf ("rdma/siw: network and RDMA core interface")
Link: https://lore.kernel.org/r/20200302155814.9896-1-bmt@zurich.ibm.com
Reported-by: syzbot+2e80962bedd9559fe0b3@syzkaller.appspotmail.com
Signed-off-by: NBernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
      12e5eef0
    • M
      RDMA/nldev: Fix crash when set a QP to a new counter but QPN is missing · 78f34a16
      由 Mark Zhang 提交于 
      This fixes the kernel crash when a RDMA_NLDEV_CMD_STAT_SET command is
received, but the QP number parameter is not available.

  iwpm_register_pid: Unable to send a nlmsg (client = 2)
  infiniband syz1: RDMA CMA: cma_listen_on_dev, error -98
  general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
  KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
  CPU: 0 PID: 9754 Comm: syz-executor069 Not tainted 5.6.0-rc2-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  RIP: 0010:nla_get_u32 include/net/netlink.h:1474 [inline]
  RIP: 0010:nldev_stat_set_doit+0x63c/0xb70 drivers/infiniband/core/nldev.c:1760
  Code: fc 01 0f 84 58 03 00 00 e8 41 83 bf fb 4c 8b a3 58 fd ff ff 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 6d
  RSP: 0018:ffffc900068bf350 EFLAGS: 00010247
  RAX: dffffc0000000000 RBX: ffffc900068bf728 RCX: ffffffff85b60470
  RDX: 0000000000000000 RSI: ffffffff85b6047f RDI: 0000000000000004
  RBP: ffffc900068bf750 R08: ffff88808c3ee140 R09: ffff8880a25e6010
  R10: ffffed10144bcddc R11: ffff8880a25e6ee3 R12: 0000000000000000
  R13: ffff88809acb0000 R14: ffff888092a42c80 R15: 000000009ef2e29a
  FS:  0000000001ff0880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f4733e34000 CR3: 00000000a9b27000 CR4: 00000000001406f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
    rdma_nl_rcv_msg drivers/infiniband/core/netlink.c:195 [inline]
    rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline]
    rdma_nl_rcv+0x5d9/0x980 drivers/infiniband/core/netlink.c:259
    netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
    netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1329
    netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1918
    sock_sendmsg_nosec net/socket.c:652 [inline]
    sock_sendmsg+0xd7/0x130 net/socket.c:672
    ____sys_sendmsg+0x753/0x880 net/socket.c:2343
    ___sys_sendmsg+0x100/0x170 net/socket.c:2397
    __sys_sendmsg+0x105/0x1d0 net/socket.c:2430
    __do_sys_sendmsg net/socket.c:2439 [inline]
    __se_sys_sendmsg net/socket.c:2437 [inline]
    __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437
    do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
    entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x4403d9
  Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
  RSP: 002b:00007ffc0efbc5c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
  RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004403d9
  RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000004
  RBP: 00000000006ca018 R08: 0000000000000008 R09: 00000000004002c8
  R10: 000000000000004a R11: 0000000000000246 R12: 0000000000401c60
  R13: 0000000000401cf0 R14: 0000000000000000 R15: 0000000000000000

Fixes: b389327d ("RDMA/nldev: Allow counter manual mode configration through RDMA netlink")
Link: https://lore.kernel.org/r/20200227125111.99142-1-leon@kernel.org
Reported-by: syzbot+bd4af81bc51ee0283445@syzkaller.appspotmail.com
Signed-off-by: NMark Zhang <markz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
      78f34a16
    • J
      RDMA/odp: Ensure the mm is still alive before creating an implicit child · a4e63bce
      由 Jason Gunthorpe 提交于 
      Registration of a mmu_notifier requires the caller to hold a mmget() on
the mm as registration is not permitted to race with exit_mmap(). There is
a BUG_ON inside the mmu_notifier to guard against this.

Normally creating a umem is done against current which implicitly holds
the mmget(), however an implicit ODP child is created from a pagefault
work queue and is not guaranteed to have a mmget().

Call mmget() around this registration and abort faulting if the MM has
gone to exit_mmap().

Before the patch below the notifier was registered when the implicit ODP
parent was created, so there was no chance to register a notifier outside
of current.

Fixes: c571feca ("RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm'")
Link: https://lore.kernel.org/r/20200227114118.94736-1-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
      a4e63bce