1. 28 7月, 2012 16 次提交
  2. 27 7月, 2012 1 次提交
  3. 25 7月, 2012 5 次提交
  4. 12 7月, 2012 3 次提交
    • N
      SUNRPC/cache: fix reporting of expired cache entries in 'content' file. · 200724a7
      NeilBrown 提交于
      Entries that are in a sunrpc cache but are not valid should be reported
      with a leading '#' so they look like a comment.
      Commit  d202cce8 (sunrpc: never return expired entries in sunrpc_cache_lookup)
      broke this for expired entries.
      
      This particularly applies to entries that have been replaced by newer entries.
      sunrpc_cache_update sets the expiry of the replaced entry to '0', but it
      remains in the cache until the next 'cache_clean'.
      The result is that if you
      
        echo 0 2000000000 1 0 > /proc/net/rpc/auth.unix.gid/channel
      
      several times, then
      
        cat /proc/net/rpc/auth.unix.gid/content
      
      It will display multiple entries for the one uid, which is at least confusing:
      
        #uid cnt: gids...
        0 1: 0
        0 1: 0
        0 1: 0
      
      With this patch, expired entries are marked as comments so you get
      
        #uid cnt: gids...
        0 1: 0
        # 0 1: 0
        # 0 1: 0
      
      These expired entries will never be seen by cache_check() as they are always
      *after* a non-expired entry with the same key - so the extra check is only
      needed in c_show()
      Signed-off-by: NNeilBrown <neilb@suse.de>
      
      --
      It's not a big problem, but it had me confused for a while, so it could
      well confuse others.
      Thanks,
      NeilBrown
      Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      200724a7
    • E
      sunrpc/cache.h: replace simple_strtoul · bbf43dc8
      Eldad Zack 提交于
      This patch replaces the usage of simple_strtoul with kstrtoint in
      get_int(), since the simple_str* family doesn't account for overflow
      and is deprecated.
      Also, in this specific case, the long from strtol is silently converted
      to an int by the caller.
      
      As Joe Perches <joe@perches.com> suggested, this patch also removes
      the redundant temporary variable rv, since kstrtoint() will not write to
      anint unless it's successful.
      
      Cc: Joe Perches <joe@perches.com>
      Signed-off-by: NEldad Zack <eldad@fogrefinery.com>
      Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      bbf43dc8
    • E
      sunrpc/cache.h: fix coding style · d9c2ede6
      Eldad Zack 提交于
      Neaten code style in get_int().
      Also use sizeof() instead of hard coded number as suggested by
      Joe Perches <joe@perches.com>.
      
      Cc: Joe Perches <joe@perches.com>
      Signed-off-by: NEldad Zack <eldad@fogrefinery.com>
      Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      d9c2ede6
  5. 11 7月, 2012 4 次提交
    • J
      nfsd: share some function prototypes · 7f2e7dc0
      J. Bruce Fields 提交于
      Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      7f2e7dc0
    • J
      nfsd: allow owner_override only for regular files · d91d0b56
      J. Bruce Fields 提交于
      We normally allow the owner of a file to override permissions checks on
      IO operations, since:
      	- the client will take responsibility for doing an access check
      	  on open;
      	- the permission checks offer no protection against malicious
      	  clients--if they can authenticate as the file's owner then
      	  they can always just change its permissions;
      	- checking permission on each IO operation breaks the usual
      	  posix rule that permission is checked only on open.
      
      However, we've never allowed the owner to override permissions on
      readdir operations, even though the above logic would also apply to
      directories.  I've never heard of this causing a problem, probably
      because a) simultaneously opening and creating a directory (with
      restricted mode) isn't possible, and b) opening a directory, then
      chmod'ing it, is rare.
      
      Our disallowal of owner-override on directories appears to be an
      accident, though--the readdir itself succeeds, and then we fail just
      because lookup_one_len() calls in our filldir methods fail.
      
      I'm not sure what the easiest fix for that would be.  For now, just make
      this behavior obvious by denying the override right at the start.
      
      This also fixes some odd v4 behavior: with the rdattr_error attribute
      requested, it would perform the readdir but return an ACCES error with
      each entry.
      Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      d91d0b56
    • J
      nfsd4: release openowners on free in >=4.1 case · 74dbafaf
      J. Bruce Fields 提交于
      We don't need to keep openowners around in the >=4.1 case, because they
      aren't needed to handle CLOSE replays any more (that's a problem for
      sessions).  And doing so causes unexpected failures on a subsequent
      destroy_clientid to fail.
      
      We probably also need something comparable for lock owners on last
      unlock.
      Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      74dbafaf
    • J
      nfsd4: our filesystems are normally case sensitive · 2930d381
      J. Bruce Fields 提交于
      Actually, xfs and jfs can optionally be case insensitive; we'll handle
      that case in later patches.
      
      Cc: stable@vger.kernel.org
      Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      2930d381
  6. 20 6月, 2012 5 次提交
    • J
      nfsd4: process_open2 cleanup · 4af82504
      J. Bruce Fields 提交于
      Note we can simplify the error handling a little by doing the truncate
      earlier.
      Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      4af82504
    • J
      nfsd4: nfsd4_lock() cleanup · e1aaa891
      J. Bruce Fields 提交于
      Share a little common logic.  And note the comments here are a little
      out of date (e.g. we don't always create new state in the "new" case any
      more.)
      Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      e1aaa891
    • J
      nfsd4: remove unnecessary comment · 9068bed1
      J. Bruce Fields 提交于
      For the most part readers of cl_cb_state only need a value that is
      "eventually" right.  And the value is set only either 1) in response to
      some change of state, in which case it's set to UNKNOWN and then a
      callback rpc is sent to probe the real state, or b) in the handling of a
      response to such a callback.  UNKNOWN is therefore always a "temporary"
      state, and for the other states we're happy to accept last writer wins.
      
      So I think we're OK here.
      Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      9068bed1
    • C
      NFSD: TEST_STATEID should not return NFS4ERR_STALE_STATEID · 7df302f7
      Chuck Lever 提交于
      According to RFC 5661, the TEST_STATEID operation is not allowed to
      return NFS4ERR_STALE_STATEID.  In addition, RFC 5661 says:
      
      15.1.16.5.  NFS4ERR_STALE_STATEID (Error Code 10023)
      
         A stateid generated by an earlier server instance was used.  This
         error is moot in NFSv4.1 because all operations that take a stateid
         MUST be preceded by the SEQUENCE operation, and the earlier server
         instance is detected by the session infrastructure that supports
         SEQUENCE.
      
      I triggered NFS4ERR_STALE_STATEID while testing the Linux client's
      NOGRACE recovery.  Bruce suggested an additional test that could be
      useful to client developers.
      
      Lastly, RFC 5661, section 18.48.3 has this:
      
       o  Special stateids are always considered invalid (they result in the
          error code NFS4ERR_BAD_STATEID).
      
      An explicit check is made for those state IDs to avoid printk noise.
      Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
      Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      7df302f7
    • W
      nfsd: probe the back channel on new connections · 24119673
      Weston Andros Adamson 提交于
      Initiate a CB probe when a new connection with the correct direction is added
      to a session (IFF backchannel is marked as down).  Without this a
      BIND_CONN_TO_SESSION has no effect on the internal backchannel state, which
      causes the server to reply to every SEQUENCE op with the
      SEQ4_STATUS_CB_PATH_DOWN flag set until DESTROY_SESSION.
      Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
      Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      24119673
  7. 19 6月, 2012 5 次提交
    • L
      Merge tag 'mmc-fixes-for-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc · 9023a409
      Linus Torvalds 提交于
      Pull MMC fixes from Chris Ball:
       - atmel-mci: Fixes for NULL timer and DMA burst/chunk size
       - dw_mmc: Fix DMA ordering, clkdiv calculation, NULL host->data
       - mxs_mmc: Compile fix for CONFIG_OF=y && CONFIG_PM=n
       - omap: Fix NULL deref in mmc_omap_remove_slot(), reg_shift initialization
       - sdhci-s3c: Fix boot regression by adding IRQF_ONESHOT flag
       - Small fixes to core/sd, core/sdio, sdhci
      
      * tag 'mmc-fixes-for-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
        mmc: mxs-mmc: Move of_match_table out of CONFIG_PM
        mmc: sdhci-s3c: pass IRQF ONESHOT to request threaded irq
        mmc: core: return an error on suspend if mmc_deselect_cards fails
        mmc: omap: Fix broken reg_shift initialization
        mmc: omap: Fix NULL pointer dereference if mmc_omap_new_slot() fails
        mmc: omap: Fix a section warning regression
        mmc: dw_mmc: correct the calculation for CLKDIV
        mmc: dw_mmc: fix incorrect setting of host->data of NULL
        mmc: dw_mmc: fix the IDMAC sw reset
        mmc: dw_mmc: fix the transmission handling in IDMAC
        mmc: sdio: fix setting card data bus width as 4-bit
        mmc: atmel-mci: fix burst/chunk size modification
        mmc: atmel-mci: fix data timeout issue
        mmc: sdhci: Use DBG() instead of pr_warning() on large timeout
      9023a409
    • L
      Merge tag 'rproc-fixes-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc · 1bea57f5
      Linus Torvalds 提交于
      Pull remoteproc fixes from Ohad Ben-Cohen:
       "A few relatively-small remoteproc fixes for 3.5: two error path fixes,
        and one -Wformat warning fix."
      
      * tag 'rproc-fixes-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
        remoteproc/omap: fix dev_err typo
        remoteproc: fix missing fault indication in error-path
        remoteproc: fix print format warnings
      1bea57f5
    • L
      Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging · 4005af65
      Linus Torvalds 提交于
      Pull hwmon subsystem fixes from Jean Delvare.
      
      * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
        hwmon: (coretemp) Drop needless initialization
        hwmon: (coretemp) Document TjMax for 3rd generation i5/i7 processors
        hwmon: (coretemp) Improve support for TjMax detection on Atom CPUs
        hwmon: (coretemp) Add support for Atom D2000 and N2000 series CPU models
        hwmon: (coretemp) Improve support of recent Atom CPU models
      4005af65
    • P
      bug.h: Fix up powerpc build regression. · 2603efa3
      Paul Mundt 提交于
      The asm-generic/bug.h __ASSEMBLY__ guarding is completely bogus, which
      tripped up the powerpc build when the kernel.h include was added:
      
      	In file included from include/asm-generic/bug.h:5:0,
      			 from arch/powerpc/include/asm/bug.h:127,
      			 from arch/powerpc/kernel/head_64.S:31:
      	include/linux/kernel.h:44:0: warning: "ALIGN" redefined [enabled by default]
      	include/linux/linkage.h:57:0: note: this is the location of the previous definition
      	include/linux/sysinfo.h: Assembler messages:
      	include/linux/sysinfo.h:7: Error: Unrecognized opcode: `struct'
      	include/linux/sysinfo.h:8: Error: Unrecognized opcode: `__kernel_long_t'
      
      Moving the __ASSEMBLY__ guard up and stashing the kernel.h include under
      it fixes this up, as well as covering the case the original fix was
      attempting to handle.
      Tested-by: NStephen Rothwell <sfr@canb.auug.org.au>
      Acked-by: NArnd Bergmann <arnd@arndb.de>
      Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2603efa3
    • P
      Makefile: fix up CROSS_COMPILE and READABLE_ASM interaction. · a1f42beb
      Paul Mundt 提交于
      When the READABLE_ASM cc-option tests were added they were done so prior
      to the arch Makefile include, resulting in cc-option being run on the
      host cc instead of the factoring in the cross prefix set up by the
      architecture.
      
      This bumps the include back up so that cc-option actually runs on the
      compiler that we're building with.
      
      Cc: Andi Kleen <andi@firstfloor.org>
      Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a1f42beb
  8. 18 6月, 2012 1 次提交
    • L
      Merge branch 'hfsplus' · 39a50b42
      Linus Torvalds 提交于
      Merge hfsplus fixes from Christoph Hellwig:
       "Two small hfsplus fixes:
      
         - a one liner regression fix for large volume handling from Janne
           Kalliomäki.
         - a fixup for the boot image blessing feature to make it work with
           the fake "hardlinks" in hfsplus from Matthew Garrett."
      
      * branch 'hfsplus':
        hfsplus: fix bless ioctl when used with hardlinks
        hfsplus: fix overflow in sector calculations in hfsplus_submit_bio
      39a50b42