When purging an orig_node we should only decrease counter tracking the
number of nodes without multicast optimizations support if it was
increased through this orig_node before.

A not yet quite initialized orig_node (meaning it did not have its turn
in the mcast-tvlv handler so far) which gets purged would not adhere to
this and will lead to a counter imbalance.

Fixing this by adding a check whether the orig_node is mcast-initalized
before decreasing the counter in the mcast-orig_node-purging routine.

Introduced by 60432d75
("batman-adv: Announce new capability via multicast TVLV")
Reported-by: NTobias Hachmer <tobias@hachmer.de>
Signed-off-by: NLinus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

A miscounting of nodes having multicast optimizations enabled can lead
to multicast packet loss in the following scenario:

If the first OGM a node receives from another one has no multicast
optimizations support (no multicast tvlv) then we are missing to
increase the counter. This potentially leads to the wrong assumption
that we could safely use multicast optimizations.

Fixings this by increasing the counter if the initial OGM has the
multicast TVLV unset, too.

Introduced by 60432d75
("batman-adv: Announce new capability via multicast TVLV")
Reported-by: NTobias Hachmer <tobias@hachmer.de>
Signed-off-by: NLinus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

batadv_has_set_lock_class() is called with the wrong hash table as first
argument (probably due to a copy-paste error), which leads to false
positives when running with lockdep.

Introduced-by: 612d2b4f
("batman-adv: network coding - save overheard and tx packets for decoding")
Signed-off-by: NMartin Hundebøll <martin@hundeboll.net>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Currently it can happen that the reception of an OGM from a new
originator is not being accepted. More precisely it can happen that
an originator struct gets allocated and initialized
(batadv_orig_node_new()), even the TQ gets calculated and set correctly
(batadv_iv_ogm_calc_tq()) but still the periodic orig_node purging
thread will decide to delete it if it has a chance to jump between
these two function calls.

This is because batadv_orig_node_new() initializes the last_seen value
to zero and its caller (batadv_iv_ogm_orig_get()) makes it visible to
other threads by adding it to the hash table already.
batadv_iv_ogm_calc_tq() will set the last_seen variable to the correct,
current time a few lines later but if the purging thread jumps in between
that it will think that the orig_node timed out and will wrongly
schedule it for deletion already.

If the purging interval is the same as the originator interval (which is
the default: 1 second), then this game can continue for several rounds
until the random OGM jitter added enough difference between these
two (in tests, two to about four rounds seemed common).

Fixing this by initializing the last_seen variable of an orig_node
to the current time before adding it to the hash table.
Signed-off-by: NLinus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

The current condition actually does NOT consider bonding when the
interface the packet came in from is the soft interface, which is the
opposite of what it should do (and the comment describes). Fix that and
slightly simplify the condition.
Reported-by: NRay Gibson <booray@gmail.com>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

The CPSW IP implements pulse-signaled interrupts. Due to
that we must write a correct, pre-defined value to the
CPDMA_MACEOIVECTOR register so the controller generates
a pulse on the correct IRQ line to signal the End Of
Interrupt.

The way the driver is written today, all four IRQ lines
are requested using the same IRQ handler and, because of
that, we could fall into situations where a TX IRQ fires
but we tell the controller that we ended an RX IRQ (or
vice-versa). This situation triggers an IRQ storm on the
reserved IRQ 127 of INTC which will in turn call ack_bad_irq()
which will, then, print a ton of:

	unexpected IRQ trap at vector 00

In order to fix the problem, we are moving all calls to
cpdma_ctlr_eoi() inside the IRQ handler and making sure
we *always* write the correct value to the CPDMA_MACEOIVECTOR
register. Note that the algorithm assumes that IRQ numbers and
value-to-be-written-to-EOI are proportional, meaning that a
write of value 0 would trigger an EOI pulse for the RX_THRESHOLD
Interrupt and that's the IRQ number sitting in the 0-th index
of our irqs_table array.

This, however, is safe at least for current implementations of
CPSW so we will refrain from making the check smarter (and, as
a side-effect, slower) until we actually have a platform where
IRQ lines are swapped.

This patch has been tested for several days with AM335x- and
AM437x-based platforms. AM57x was left out because there are
still pending patches to enable ethernet in mainline for that
platform. A read of the TRM confirms the statement on previous
paragraph.
Reported-by: NYegor Yefremov <yegorslists@googlemail.com>
Fixes: 510a1e72 (drivers: net: davinci_cpdma: acknowledge interrupt properly)
Cc: <stable@vger.kernel.org> # v3.9+
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When allocation of all RQs fail, we do not free previously allocated buffers,
before returning error. This causes memory leak.

This patch fixes this by calling vnic_rq_clean(), which frees all the rq
buffers.
Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some buggy firmwares export an incorrect MAC address (00:a0:c6:00:00:00). This
makes for example checking devices for random MAC addresses tricky, and you
might end up with multiple network interfaces with the same address.

This patch tries to fix, or at least improve, the situation by setting the MAC
address of devices with this firmware bug to a random address. I tested the
patch with two devices that has this firmware bug (Huawei E398 and E392), and
network traffic worked fine after changing the address.
Signed-off-by: NKristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Until now, when VLAN acceleration was in use, the bytes of the VLAN header
were not included in port or flow byte counters.  They were however
included when VLAN acceleration was not used.  This commit corrects the
inconsistency, by always including the VLAN header in byte counters.

Previous discussion at
http://openvswitch.org/pipermail/dev/2014-December/049521.htmlReported-by: NMotonori Shindo <mshindo@vmware.com>
Signed-off-by: NBen Pfaff <blp@nicira.com>
Reviewed-by: NFlavio Leitner <fbl@sysclose.org>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Thomas Jarosch reported IPsec TCP stalls when a PMTU event occurs.

In fact the problem was completely unrelated to IPsec.  The bug is
also reproducible if you just disable TSO/GSO.

The problem is that when the MSS goes down, existing queued packet
on the TX queue that have not been transmitted yet all look like
TSO packets and get treated as such.

This then triggers a bug where tcp_mss_split_point tells us to
generate a zero-sized packet on the TX queue.  Once that happens
we're screwed because the zero-sized packet can never be removed
by ACKs.

Fixes: 1485348d ("tcp: Apply device TSO segment limit earlier")
Reported-by: NThomas Jarosch <thomas.jarosch@intra2net.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Cheers,
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Altera network device doesn't come up after

ifconfig eth0 down
ifconfig eth0 up

The reason behind is clearing priv->phydev during tse_shutdown().
The phydev is not restored back at tse_open().

Resubmiting as to follow Tobias Klauser suggestion.
phy_start/phy_stop are called on each ifup/ifdown and
phy_disconnect is called once during the module removal.
Signed-off-by: NKostya Belezko <bkostya@hotmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Or Gerlitz says:

====================
mlx4 driver fixes for 3.19-rc2

Please push Maor's patch to -stable >= 3.17

Jack's fixes error-flow issues introduced in 3.19-rc1, no need for -stable.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We shouldn't call UNMAP_FA here, this is done in mlx4_load_one.

If mlx4_query_func fails, we need to invoke CLOSE_HCA for both
native and master.

Fixes: a0eacca9 ('net/mlx4_core: Refactor mlx4_load_one')
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously, mlx4_mt_rereg_write filled the MPT's entity_size with the
old MTT's page shift, which could result in using an incorrect offset.
Fix the initialization to be after we calculate the new MTT offset.

In addition, assign mtt order to -1 after calling mlx4_mtt_cleanup. This
is necessary in order to mark the MTT as invalid and avoid freeing it later.

Fixes: e630664c ('mlx4_core: Add helper functions to support MR re-registration')
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the check of adapter fails and goes into the 'else' branch, the
return value 'err' should not still be zero.
Signed-off-by: NYongjian Xu <xuyongjiande@gmail.com>
Acked-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

The patch also modifies the test of mgp->cmd to satisfy checkpatch.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2014-12-31

This series contains updates to fixes for e100, igb and i40e.

John Linville fixes a typo in e100 that has been around for some time,
where an attempted revert actually inverted the test for eeprom_mdix_enabled.

Todd fixes up a code comment that should have been removed back in 2007.

Joe Perches fixes a possible memory leak in i40e which was reported by
Dan Carpenter using smatch.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I didn't notice that return in the code, fix it by
adding a goto out instead to free the memory.

Fixes:

> New smatch warnings:
> drivers/net/ethernet/intel/i40e/i40e_debugfs.c:832 i40e_dbg_dump_desc() warn: possible memory leak of 'ring'
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJoe Perches <joe@perches.com>
Tested-by: NJim Young <james.m.young@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Remove a FIXME comment that was missed in a commit on 1/2007.
Signed-off-by: NTodd Fujinaka <todd.fujinaka@intel.com>
Reported-by: Nnick <xerofoify@gmail.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Although it doesn't explicitly say so, commit 60ffa478 ("e100:
Fix MDIO/MDIO-X") appears to be intended to revert the earlier commit
64895145 ("e100: fixed e100 MDI/MDI-X issues").  However,
careful examination reveals that the attempted revert actually
_inverted_ the test for eeprom_mdix_enabled.  That is bound to program
a few PHYs incorrectly...

https://bugzilla.redhat.com/show_bug.cgi?id=1156417Signed-off-by: N"John W. Linville" <linville@tuxdriver.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Pull networking fixes from David Miller:

 1) Fix double SKB free in bluetooth 6lowpan layer, from Jukka Rissanen.

 2) Fix receive checksum handling in enic driver, from Govindarajulu
    Varadarajan.

 3) Fix NAPI poll list corruption in virtio_net and caif_virtio, from
    Herbert Xu.  Also, add code to detect drivers that have this mistake
    in the future.

 4) Fix doorbell endianness handling in mlx4 driver, from Amir Vadai.

 5) Don't clobber IP6CB() before xfrm6_policy_check() is called in TCP
    input path,f rom Nicolas Dichtel.

 6) Fix MPLS action validation in openvswitch, from Pravin B Shelar.

 7) Fix double SKB free in vxlan driver, also from Pravin.

 8) When we scrub a packet, which happens when we are switching the
    context of the packet (namespace, etc.), we should reset the
    secmark.  From Thomas Graf.

 9) ->ndo_gso_check() needs to do more than return true/false, it also
    has to allow the driver to clear netdev feature bits in order for
    the caller to be able to proceed properly.  From Jesse Gross.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
  genetlink: A genl_bind() to an out-of-range multicast group should not WARN().
  netlink/genetlink: pass network namespace to bind/unbind
  ne2k-pci: Add pci_disable_device in error handling
  bonding: change error message to debug message in __bond_release_one()
  genetlink: pass multicast bind/unbind to families
  netlink: call unbind when releasing socket
  netlink: update listeners directly when removing socket
  genetlink: pass only network namespace to genl_has_listeners()
  netlink: rename netlink_unbind() to netlink_undo_bind()
  net: Generalize ndo_gso_check to ndo_features_check
  net: incorrect use of init_completion fixup
  neigh: remove next ptr from struct neigh_table
  net: xilinx: Remove unnecessary temac_property in the driver
  net: phy: micrel: use generic config_init for KSZ8021/KSZ8031
  net/core: Handle csum for CHECKSUM_COMPLETE VXLAN forwarding
  openvswitch: fix odd_ptr_err.cocci warnings
  Bluetooth: Fix accepting connections when not using mgmt
  Bluetooth: Fix controller configuration with HCI_QUIRK_INVALID_BDADDR
  brcmfmac: Do not crash if platform data is not populated
  ipw2200: select CFG80211_WEXT
  ...

Merge tag 'linux-kselftest-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fix from Shuah Khan:
 "Fix exec test compile warnings"

* tag 'linux-kselftest-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/exec: Use %zu to format size_t

Pull CIFS fixes from Steve French:
 "A set of three minor cifs fixes"

* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: make new inode cache when file type is different
  Fix signed/unsigned pointer warning
  Convert MessageID in smb2_hdr to LE

Pull UDF & isofs fixes from Jan Kara:
 "A couple of UDF fixes of handling of corrupted media and one iso9660
  fix of the same"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Reduce repeated dereferences
  udf: Check component length before reading it
  udf: Check path length when reading symlink
  udf: Verify symlink size before loading it
  udf: Verify i_size when loading inode
  isofs: Fix unchecked printing of ER records

Pull power management and ACPI material from Rafael J Wysocki:
 "These are fixes (operating performance points library, cpufreq-dt
  driver, cpufreq core, ACPI backlight, cpupower tool), cleanups
  (cpuidle), new processor IDs for the RAPL (Running Average Power
  Limit) power capping driver, and a modification of the generic power
  domains framework allowing modular drivers to call one of its helper
  functions.

  Specifics:

   - Fix for a potential NULL pointer dereference in the cpufreq core
     due to an initialization race condition (Ethan Zhao).

   - Fixes for abuse of the OPP (Operating Performance Points) API
     related to RCU and other minor issues in the OPP library and the
     cpufreq-dt driver (Dmitry Torokhov).

   - cpuidle governors cleanup making them measure idle duration in a
     better way without using the CPUIDLE_FLAG_TIME_INVALID flag which
     allows that flag to be dropped from the ACPI cpuidle driver and
     from the core too (Len Brown).

   - New ACPI backlight blacklist entries for Samsung machines without a
     working native backlight interface that need to use the ACPI
     backlight instead (Aaron Lu).

   - New CPU IDs of future Intel Xeon CPUs for the Intel RAPL power
     capping driver (Jacob Pan).

   - Generic power domains framework modification to export the
     of_genpd_get_from_provider() function to modular drivers that will
     allow future driver modifications to be based on the mainline (Amit
     Daniel Kachhap).

   - Two fixes for the cpupower tool (Michal Privoznik, Prarit
     Bhargava)"

* tag 'pm+acpi-3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / video: Add some Samsung models to disable_native_backlight list
  tools / cpupower: Fix no idle state information return value
  tools / cpupower: Correctly detect if running as root
  cpufreq: fix a NULL pointer dereference in __cpufreq_governor()
  cpufreq-dt: defer probing if OPP table is not ready
  PM / OPP: take RCU lock in dev_pm_opp_get_opp_count
  PM / OPP: fix warning in of_free_opp_table()
  PM / OPP: add some lockdep annotations
  powercap / RAPL: add IDs for future Xeon CPUs
  PM / Domains: Export of_genpd_get_from_provider function
  cpuidle / ACPI: remove unused CPUIDLE_FLAG_TIME_INVALID
  cpuidle: ladder: Better idle duration measurement without using CPUIDLE_FLAG_TIME_INVALID
  cpuidle: menu: Better idle duration measurement without using CPUIDLE_FLAG_TIME_INVALID

Users can request to bind to arbitrary multicast groups, so warning
when the requested group number is out of range is not appropriate.

And with the warning removed, and the 'err' variable properly given
an initial value, we can remove 'found' altogether.
Reported-by: NSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull spi fixes from Mark Brown:
 "A few driver specific fixes here, the DMA burst size increase in the
  spfi driver is a fix to make the hardware happier in some situations"

* tag 'spi-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: img-spfi: Increase DMA burst size
  spi: img-spfi: Enable controller before starting TX DMA
  spi: sh-msiof: Add runtime PM lock in initializing

Pull one regulator fix from Mark Brown:
 "One fix here, a fix for the voltage mapping on one of the s2mps11
  regulators which broke systems using it including apparently the
  Gear 2 smartwatches"

* tag 'regulator-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: s2mps11: Fix dw_mmc failure on Gear 2

Pull one MMC fix from Ulf Hansson:
 "MMC core:

   - Fix selection of buswidth for mmc hosts supporting 1-bit only"

* tag 'mmc-v3.19-2' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: core: stop trying to switch width when only one bit is supported

Pull thermal management updates from Zhang Rui:
 "First of all, the most important change is the thermal cpu cooling
  fixes.  The major fix here is to have proper sequencing between
  cpufreq layer and thermal cpu cooling registration.  A take away of
  this fix is an improvement in the thermal drivers code.  Thermal
  drivers that require cpu cooling do not need to check for cpufreq
  layer.  The requirement now is to propagate the error code, if any,
  while registering cpu cooling device.  Thanks to Viresh for
  implementing the required CPUfreq changes.

  Second, a new driver is introduced for int340x processor thermal
  device.  Given that int340x thermal is disabled by default, and this
  processor thermal device is only available on limited platforms, plus
  the driver does nothing but exposes some thermal limitation
  information for user space to use, thus I think it is safe to include
  it in this pull request after missing 3.19-rc2.

  Specifics:

   - Thermal cpu cooling fixes and cleanups.

   - introduce INT340X processor thermal reporting device driver.

   - several small fixes and cleanups for int340x thermal drivers"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (43 commits)
  Thermal/int340x/int3403: Free acpi notification handler
  Thermal/int340x/processor_thermal: Fix memory leak
  Thermal/int340x/int3403: Fix memory leak
  thermal: int340x: Introduce processor reporting device
  thermal: int340x_thermal: drop owner assignment from platform_drivers
  thermal: drop owner assignment from platform_drivers
  thermal: cpu_cooling: document node in struct cpufreq_cooling_device
  thermal/powerclamp: add ids for future xeon cpus
  Thermal/int340x: Handle properly the case when _trt or _art acpi entry is missing
  thermal: cpu_cooling: return ERR_PTR() for !CPU_THERMAL or !THERMAL_OF
  thermal: cpu_cooling: small memory leak on error
  thermal: ti-soc-thermal: Do not print error message in the EPROBE_DEFER case
  thermal: db8500: Do not print error message in the EPROBE_DEFER case
  thermal: imx: Do not print error message in the EPROBE_DEFER case
  thermal: Fix cdev registration with THERMAL_NO_LIMIT on 64bit
  drivers: thermal: Remove ARCH_HAS_BANDGAP dependency for samsung
  thermal:core:fix: Check return code of the ->get_max_state() callback
  thermal: cpu_cooling: update copyright tags
  thermal: cpu_cooling: Use cpufreq_dev->freq_table for finding level/freq
  thermal: cpu_cooling: Store frequencies in descending order
  ...

Commit 2457aec6 ("mm: non-atomically mark page accessed during page
cache allocation where possible") has added a separate parameter for
specifying gfp mask for radix tree allocations.

Not only this is less than optimal from the API point of view because it
is error prone, it is also buggy currently because
grab_cache_page_write_begin is using GFP_KERNEL for radix tree and if
fgp_flags doesn't contain FGP_NOFS (mostly controlled by fs by
AOP_FLAG_NOFS flag) but the mapping_gfp_mask has __GFP_FS cleared then
the radix tree allocation wouldn't obey the restriction and might
recurse into filesystem and cause deadlocks.  This is the case for most
filesystems unfortunately because only ext4 and gfs2 are using
AOP_FLAG_NOFS.

Let's simply remove radix_gfp_mask parameter because the allocation
context is same for both page cache and for the radix tree.  Just make
sure that the radix tree gets only the sane subset of the mask (e.g.  do
not pass __GFP_WRITE).

Long term it is more preferable to convert remaining users of
AOP_FLAG_NOFS to use mapping_gfp_mask instead and simplify this
interface even further.
Reported-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* acpi-video:
  ACPI / video: Add some Samsung models to disable_native_backlight list

* pm-domains:
  PM / Domains: Export of_genpd_get_from_provider function

* powercap:
  powercap / RAPL: add IDs for future Xeon CPUs

* pm-tools:
  tools / cpupower: Fix no idle state information return value
  tools / cpupower: Correctly detect if running as root

* pm-cpufreq:
  cpufreq: fix a NULL pointer dereference in __cpufreq_governor()
  cpufreq-dt: defer probing if OPP table is not ready

* pm-cpuidle:
  cpuidle / ACPI: remove unused CPUIDLE_FLAG_TIME_INVALID
  cpuidle: ladder: Better idle duration measurement without using CPUIDLE_FLAG_TIME_INVALID
  cpuidle: menu: Better idle duration measurement without using CPUIDLE_FLAG_TIME_INVALID

* pm-opp:
  PM / OPP: take RCU lock in dev_pm_opp_get_opp_count
  PM / OPP: fix warning in of_free_opp_table()
  PM / OPP: add some lockdep annotations

mmc_select_bus_width() will try to switch to MMC_BUS_WIDTH_4 even if
MMC_CAP_4_BIT_DATA and MMC_CAP_8_BIT_DATA are not set in host->caps.
Return as soon as possible when those flags are not set

Fixes: 577fb131 (mmc: rework selection of bus speed mode)
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: <stable@vger.kernel.org> # 3.17
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>