- 11 1月, 2010 19 次提交
-
-
由 Francisco Jerez 提交于
This should avoid a race condition on nv0x, if we're doing it with actual PGRAPH objects and a there's a fence within the FIFO DMA fetch area when a context switch kicks in. In that case we get an ILLEGAL_MTHD interrupt as expected, but the values in PGRAPH_TRAPPED_ADDR aren't calculated correctly and they're almost useless (e.g. you can see ILLEGAL_MTHDs for the now inactive channel, with a wrong offset/data pair). Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
It will be useful for various synchronization purposes, mostly stolen from "[PATCH] drm/nv50: synchronize user channel after buffer object move on kernel channel" by Maarten Maathuis. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Maarten Maathuis 提交于
- This should be better than what we have now. - I'm less sure about the non power of two path. Signed-off-by: NMaarten Maathuis <madman2003@gmail.com>
-
由 Maarten Maathuis 提交于
- Aligning to block size should ensure that the extra size is enough. - Using roundup, because not all sizes are powers of two. Signed-off-by: NMaarten Maathuis <madman2003@gmail.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Marcin Slusarz 提交于
struct fb_fillrect->color is not a color, but index into pseudo_palette array Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Should fix dim panel issues reported on Dell M6400/M6500. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
This partially reverts e4b41066, as this driver is intended to be useful with any KMS driver for suitable hardware. The missing build dependency that commit workarounded was DRM_KMS_HELPER. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
This commit has also the following 3 bugfix commits squashed into it from the nouveau git tree: drm/nouveau: Fix up the tiling alignment restrictions for nv1x. drm/nouveau: Fix up the nv2x tiling alignment restrictions. drm/nv50: fix align typo for g9x Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Dave Airlie 提交于
Lots of ppl keep thinking this is an oops, it was just a warning for me to see, just make it a printk now. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
If userspace (plymouth in this case) asks for a deeper depth, refuse it as well due to lack of resizing. This fixes an issue since < 32MB cards went to 8bpp and plymouth crashes on startup. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David John 提交于
With the current DRM code, an output that has been powered off from userspace will automatically power back on when resuming from suspend. This patch fixes this behaviour. Tested only with the Intel i915 driver on an Intel GM45 Express chipset. Signed-off-by: NDavid John <davidjon@xenontk.org> Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 07 1月, 2010 10 次提交
-
-
由 Luca Tettamanti 提交于
The mask happens to be the same, but the IH is reading the status, not the not the control register. Signed-off-by: NLuca Tettamanti <kronos.it@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Darren Jenkins 提交于
If a NULL value is possible, the dereference should only occur after the NULL test. Coverity CID: 13338 Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Darren Jenkins 提交于
If a NULL value is possible, the dereference should only occur after the NULL test. Coverity CID: 13335 Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Darren Jenkins 提交于
If a NULL value is possible, the dereference should only occur after the NULL test. Coverity CID: 13334 Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Darren Jenkins 提交于
The encoder variable can be NULL in this function so I believe it should be checked before dereference. Coverity CID: 13253 [airlied: extremely unlikely to happen] Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jiri Slaby 提交于
Stanse found a memory leak in radeon_master_create. master_priv is not freed/assigned on all paths. Fix that. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Roel Kluin 提交于
This always evaluates to true. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Adam Jackson 提交于
Signed-off-by: NAdam Jackson <ajax@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Adam Jackson 提交于
Signed-off-by: NAdam Jackson <ajax@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Zhenyu Wang 提交于
drm_pci_alloc() has input of address mask for setting pci dma mask on the device, which should be properly setup by drm driver. And leave it as a param for drm_pci_alloc() would cause confusion or mistake would corrupt the correct dma mask setting, as seen on intel hw which set wrong dma mask for hw status page. So remove it from drm_pci_alloc() function. Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 06 1月, 2010 3 次提交
-
-
由 Alex Deucher 提交于
Should fix fdo bug 25741 Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Look up primary dac adj values from the table if there is no bios or bios dac table to reference. The lookup table may need to be adjusted for certain families. Should fix kernel bug 14945. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
if necessary for combios Some early combios radeon cards don't have a connector table or dac table in the bios, if they do not, fallback to the default tables. Should fix kernel bug 14963. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 23 12月, 2009 8 次提交
-
-
由 Alex Deucher 提交于
[airlied: just adding this for completeness to avoid drift between public atombios.h files] Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
When linking multiple encoders to a connector, make sure to not link LVDS with another connector. Some bioses have the same i2c line for LVDS and VGA. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
This patch add a function which check module argument to be valid. On invalid argument it prints a warning and setback the default value. V2: Allow 0 for vram limit & agp mode which are the default value Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
Add boolean to record if some part of the driver are initialized or not this allow to avoid a crash when trying to cleanup uninitialized structure members. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This fixes LVDS on some mac laptops without a panel edid. v2 - Set proper mode type flags v3 - Note that this is not neceesarily the exact panel mode, but an approximation based on the cvt formula. For these systems we should ideally read the mode info out of the registers or add a mode table, but this works and is much simpler. v4 - Update comments and debug message. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Marek Olšák 提交于
There are 2 formats: ATI1N: 64 bits per 4x4 block, one-channel format ATI2N: 128 bits per 4x4 block, two-channel format Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Marek Olšák 提交于
Because hardware cannot disable all colorbuffers directly to do depth-only rendering, a user should: - disable reading from a colorbuffer in blending - disable fastfill - set the color channel mask to 0 to prevent writing to a colorbuffer Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rafał Miłecki 提交于
V2: detect IGP cards (which don't have own memory) Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Acked-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-