This should be const, so make it so.
Signed-off-by: NJoe Perches <joe@perches.com>
Message-Id: <d130e88dd4c82a12d979da747cc0365c72c3ba15.1601770305.git.joe@perches.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add FSGSBASE to the set of possible guest-owned CR4 bits, i.e. let the
guest own it on VMX.  KVM never queries the guest's CR4.FSGSBASE value,
thus there is no reason to force VM-Exit on FSGSBASE being toggled.

Note, because FSGSBASE is conditionally available, this is dependent on
recent changes to intercept reserved CR4 bits and to update the CR4
guest/host mask in response to guest CPUID changes.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLai Jiangshan <laijs@linux.alibaba.com>
[sean: added justification in changelog]
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200930041659.28181-6-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Intercept CR4 bits that are guest reserved so that KVM correctly injects
a #GP fault if the guest attempts to set a reserved bit.  If a feature
is supported by the CPU but is not exposed to the guest, and its
associated CR4 bit is not intercepted by KVM by default, then KVM will
fail to inject a #GP if the guest sets the CR4 bit without triggering
an exit, e.g. by toggling only the bit in question.

Note, KVM doesn't give the guest direct access to any CR4 bits that are
also dependent on guest CPUID.  Yet.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200930041659.28181-5-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Now that vcpu_after_set_cpuid() and update_exception_bitmap() are called
back-to-back, subsume the exception bitmap update into the common CPUID
update.  Drop the SVM invocation entirely as SVM's exception bitmap
doesn't vary with respect to guest CPUID.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200930041659.28181-4-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move the call to kvm_x86_ops.vcpu_after_set_cpuid() to the very end of
kvm_vcpu_after_set_cpuid() to allow the vendor implementation to react
to changes made by the common code.  In the near future, this will be
used by VMX to update its CR4 guest/host masks to account for reserved
bits.  In the long term, SGX support will update the allowed XCR0 mask
for enclaves based on the vCPU's allowed XCR0.

vcpu_after_set_cpuid() (nee kvm_update_cpuid()) was originally added by
commit 2acf923e ("KVM: VMX: Enable XSAVE/XRSTOR for guest"), and was
called separately after kvm_x86_ops.vcpu_after_set_cpuid() (nee
kvm_x86_ops->cpuid_update()).  There is no indication that the placement
of the common code updates after the vendor updates was anything more
than a "new function at the end" decision.

Inspection of the current code reveals no dependency on kvm_x86_ops'
vcpu_after_set_cpuid() in kvm_vcpu_after_set_cpuid() or any of its
helpers.  The bulk of the common code depends only on the guest's CPUID
configuration, kvm_mmu_reset_context() does not consume dynamic vendor
state, and there are no collisions between kvm_pmu_refresh() and VMX's
update of PT state.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200930041659.28181-3-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Unconditionally intercept changes to CR4.LA57 so that KVM correctly
injects a #GP fault if the guest attempts to set CR4.LA57 when it's
supported in hardware but not exposed to the guest.

Long term, KVM needs to properly handle CR4 bits that can be under guest
control but also may be reserved from the guest's perspective.  But, KVM
currently sets the CR4 guest/host mask only during vCPU creation, and
reworking flows to change that will take a bit of elbow grease.

Even if/when generic support for intercepting reserved bits exists, it's
probably not worth letting the guest set CR4.LA57 directly.  LA57 can't
be toggled while long mode is enabled, thus it's all but guaranteed to
be set once (maybe twice, e.g. by BIOS and kernel) during boot and never
touched again.  On the flip side, letting the guest own CR4.LA57 may
incur extra VMREADs.  In other words, this temporary "hack" is probably
also the right long term fix.

Fixes: fd8cb433 ("KVM: MMU: Expose the LA57 feature to VM.")
Cc: stable@vger.kernel.org
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: NLai Jiangshan <laijs@linux.alibaba.com>
[sean: rewrote changelog]
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200930041659.28181-2-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The function amd_ir_set_vcpu_affinity makes use of the parameter struct
amd_iommu_pi_data.prev_ga_tag to determine if it should delete struct
amd_iommu_pi_data from a list when not running in AVIC mode.

However, prev_ga_tag is initialized only when AVIC is enabled. The non-zero
uninitialized value can cause unintended code path, which ends up making
use of the struct vcpu_svm.ir_list and ir_list_lock without being
initialized (since they are intended only for the AVIC case).

This triggers NULL pointer dereference bug in the function vm_ir_list_del
with the following call trace:

    svm_update_pi_irte+0x3c2/0x550 [kvm_amd]
    ? proc_create_single_data+0x41/0x50
    kvm_arch_irq_bypass_add_producer+0x40/0x60 [kvm]
    __connect+0x5f/0xb0 [irqbypass]
    irq_bypass_register_producer+0xf8/0x120 [irqbypass]
    vfio_msi_set_vector_signal+0x1de/0x2d0 [vfio_pci]
    vfio_msi_set_block+0x77/0xe0 [vfio_pci]
    vfio_pci_set_msi_trigger+0x25c/0x2f0 [vfio_pci]
    vfio_pci_set_irqs_ioctl+0x88/0xb0 [vfio_pci]
    vfio_pci_ioctl+0x2ea/0xed0 [vfio_pci]
    ? alloc_file_pseudo+0xa5/0x100
    vfio_device_fops_unl_ioctl+0x26/0x30 [vfio]
    ? vfio_device_fops_unl_ioctl+0x26/0x30 [vfio]
    __x64_sys_ioctl+0x96/0xd0
    do_syscall_64+0x37/0x80
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Therefore, initialize prev_ga_tag to zero before use. This should be safe
because ga_tag value 0 is invalid (see function avic_vm_init).

Fixes: dfa20099 ("KVM: SVM: Refactor AVIC vcpu initialization into avic_init_vcpu()")
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20201003232707.4662-1-suravee.suthikulpanit@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This way we don't waste memory on VMs which don't use nesting
virtualization even when the host enabled it for them.
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201001112954.6258-5-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This will be used to signal an error to the userspace, in case
the vendor code failed during handling of this msr. (e.g -ENOMEM)
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201001112954.6258-4-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This will allow the KVM to report such errors (e.g -ENOMEM)
to the userspace.
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201001112954.6258-3-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Return 1 on errors that are caused by wrong guest behavior
(which will inject #GP to the guest)

And return a negative error value on issues that are
the kernel's fault (e.g -ENOMEM)
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201001112954.6258-2-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

These should be const, so make it so.
Signed-off-by: NJoe Perches <joe@perches.com>
Message-Id: <ed95eef4f10fc1317b66936c05bc7dd8f943a6d5.1601770305.git.joe@perches.com>
Reviewed-by: NBen Gardon <bgardon@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

As vcpu->arch.cpuid_entries is now allocated dynamically, the only
remaining use for KVM_MAX_CPUID_ENTRIES is to check KVM_SET_CPUID/
KVM_SET_CPUID2 input for sanity. Since it was reported that the
current limit (80) is insufficient for some CPUs, bump
KVM_MAX_CPUID_ENTRIES and use an arbitrary value '256' as the new
limit.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201001130541.1398392-4-vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The current limit for guest CPUID leaves (KVM_MAX_CPUID_ENTRIES, 80)
is reported to be insufficient but before we bump it let's switch to
allocating vcpu->arch.cpuid_entries[] array dynamically. Currently,
'struct kvm_cpuid_entry2' is 40 bytes so vcpu->arch.cpuid_entries is
3200 bytes which accounts for 1/4 of the whole 'struct kvm_vcpu_arch'
but having it pre-allocated (for all vCPUs which we also pre-allocate)
gives us no real benefits.

Another plus of the dynamic allocation is that we now do kvm_check_cpuid()
check before we assign anything to vcpu->arch.cpuid_nent/cpuid_entries so
no changes are made in case the check fails.

Opportunistically remove unneeded 'out' labels from
kvm_vcpu_ioctl_set_cpuid()/kvm_vcpu_ioctl_set_cpuid2() and return
directly whenever possible.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201001130541.1398392-3-vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>

As a preparatory step to allocating vcpu->arch.cpuid_entries dynamically
make kvm_check_cpuid() check work with an arbitrary 'struct kvm_cpuid_entry2'
array.

Currently, when kvm_check_cpuid() fails we reset vcpu->arch.cpuid_nent to
0 and this is kind of weird, i.e. one would expect CPUIDs to remain
unchanged when KVM_SET_CPUID[2] call fails.

No functional change intended. It would've been possible to move the updated
kvm_check_cpuid() in kvm_vcpu_ioctl_set_cpuid2() and check the supplied
input before we start updating vcpu->arch.cpuid_entries/nent but we
can't do the same in kvm_vcpu_ioctl_set_cpuid() as we'll have to copy
'struct kvm_cpuid_entry' entries first. The change will be made when
vcpu->arch.cpuid_entries[] array becomes allocated dynamically.
Suggested-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201001130541.1398392-2-vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reviewed-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NPeter Shier <pshier@google.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Change-Id: I0c6355b09fedf8f9cc4cc5f51be418e2c1c82b7b
Message-Id: <20200818152429.1923996-5-oupton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM unconditionally provides PV features to the guest, regardless of the
configured CPUID. An unwitting guest that doesn't check
KVM_CPUID_FEATURES before use could access paravirt features that
userspace did not intend to provide. Fix this by checking the guest's
CPUID before performing any paravirtual operations.

Introduce a capability, KVM_CAP_ENFORCE_PV_FEATURE_CPUID, to gate the
aforementioned enforcement. Migrating a VM from a host w/o this patch to
a host with this patch could silently change the ABI exposed to the
guest, warranting that we default to the old behavior and opt-in for
the new one.
Reviewed-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NPeter Shier <pshier@google.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Change-Id: I202a0926f65035b872bfe8ad15307c026de59a98
Message-Id: <20200818152429.1923996-4-oupton@google.com>
Reviewed-by: NWanpeng Li <wanpengli@tencent.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Small change to avoid meaningless duplication in the subsequent patch.
No functional change intended.
Reviewed-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NPeter Shier <pshier@google.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Change-Id: I77ab9cdad239790766b7a49d5cbae5e57a3005ea
Message-Id: <20200818152429.1923996-3-oupton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No functional change intended.
Reviewed-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NPeter Shier <pshier@google.com>
Reviewed-by: NWanpeng Li <wanpengli@tencent.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Change-Id: I7cbe71069db98d1ded612fd2ef088b70e7618426
Message-Id: <20200818152429.1923996-2-oupton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM was switched to interrupt-based mechanism for 'page ready' event
delivery in Linux-5.8 (see commit 2635b5c4 ("KVM: x86: interrupt based
APF 'page ready' event delivery")) and #PF (ab)use for 'page ready' event
delivery was removed. Linux guest switched to this new mechanism
exclusively in 5.9 (see commit b1d40575 ("KVM: x86: Switch KVM guest to
using interrupts for page ready APF delivery")) so it is not possible to
get #PF for a 'page ready' event even when the guest is running on top
of an older KVM (APF mechanism won't be enabled). Update the comment in
exc_page_fault() to reflect the new reality.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201002154313.1505327-1-vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Let KVM_WERROR depend on KVM, so it doesn't show in menuconfig alone.
Signed-off-by: NMatteo Croce <mcroce@microsoft.com>
Message-Id: <20201001112014.9561-1-mcroce@linux.microsoft.com>
Fixes: 4f337faf ("KVM: allow disabling -Werror")
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Fixes: e287d6de ("Documentation: kvm: Convert cpuid.txt to .rst")
Signed-off-by: NLi Qiang <liq3ea@163.com>
Message-Id: <20201001095333.7611-1-liq3ea@163.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Allowing userspace to intercept reads to x2APIC MSRs when APICV is
fully enabled for the guest simply can't work.   But more in general,
the LAPIC could be set to in-kernel after the MSR filter is setup
and allowing accesses by userspace would be very confusing.

We could in principle allow userspace to intercept reads and writes to TPR,
and writes to EOI and SELF_IPI, but while that could be made it work, it
would still be silly.

Cc: Alexander Graf <graf@amazon.com>
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Rework the resetting of the MSR bitmap for x2APIC MSRs to ignore userspace
filtering.  Allowing userspace to intercept reads to x2APIC MSRs when
APICV is fully enabled for the guest simply can't work; the LAPIC and thus
virtual APIC is in-kernel and cannot be directly accessed by userspace.
To keep things simple we will in fact forbid intercepting x2APIC MSRs
altogether, independent of the default_allow setting.

Cc: Alexander Graf <graf@amazon.com>
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20201005195532.8674-3-sean.j.christopherson@intel.com>
[Modified to operate even if APICv is disabled, adjust documentation. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM/arm64 updates for Linux 5.10

- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation

Fix an inverted flag for intercepting x2APIC MSRs and intercept writes
by default, even when APICV is enabled.

Fixes: 3eb90017 ("KVM: x86: VMX: Prevent MSR passthrough when MSR access is denied")
Co-developed-by: NPeter Xu <peterx@redhat.com>
[sean: added changelog]
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20201005195532.8674-2-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NMarc Zyngier <maz@kernel.org>

If a change in the MMU notifier sequence number forces user_mem_abort()
to return early when attempting to handle a stage-2 fault, we return
uninitialised stack to kvm_handle_guest_abort(), which could potentially
result in the injection of an external abort into the guest or a spurious
return to userspace. Neither or these are what we want to do.

Initialise 'ret' to 0 in user_mem_abort() so that bailing due to a
change in the MMU notrifier sequence number is treated as though the
fault was handled.
Reported-by: Nkernel test robot <lkp@intel.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NAlexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: NGavin Shan <gshan@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20200930102442.16142-1-will@kernel.org

Alex pointed out that we don't pass a level hint to the TLBI instruction
when handling a stage-2 permission fault, even though the walker does
at some point have the level information in its hands.

Rework stage2_update_leaf_attrs() so that it can optionally return the
level of the updated pte to its caller, which can in turn be used to
provide the correct TLBI level hint.
Reported-by: NAlexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NAlexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: NGavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/595cc73e-636e-8b3a-f93a-b4e9fb218db8@arm.com
Link: https://lore.kernel.org/r/20200930131801.16889-1-will@kernel.org

As warned with make htmldocs:

	.../Documentation/virt/kvm/devices/vcpu.rst:70: WARNING: Malformed table.
	Text in column margin in table line 2.

	=======  ======================================================
	-ENODEV: PMUv3 not supported or GIC not initialized
	-ENXIO:  PMUv3 not properly configured or in-kernel irqchip not
	         configured as required prior to calling this attribute
	-EBUSY:  PMUv3 already initialized
	-EINVAL: Invalid filter range
	=======  ======================================================

The ':' character for two lines are above the size of the column.
Besides that, other tables at the file doesn't use ':', so
just drop them.

While here, also fix this warning also introduced at the same patch:

	.../Documentation/virt/kvm/devices/vcpu.rst:88: WARNING: Block quote ends without a blank line; unexpected unindent.

By marking the C code as a literal block.

Fixes: 8be86a5e ("KVM: arm64: Document PMU filtering API")
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/b5385dd0213f1f070667925bf7a807bf5270ba78.1601616399.git.mchehab+huawei@kernel.org

Signed-off-by: NMarc Zyngier <maz@kernel.org>

Signed-off-by: NMarc Zyngier <maz@kernel.org>

With all nVHE per-CPU variables being part of the hyp per-CPU region,
mapping them individual is not necessary any longer. They are mapped to hyp
as part of the overall per-CPU region.
Signed-off-by: NDavid Brazdil <dbrazdil@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NAndrew Scull <ascull@google.com>
Acked-by: NWill Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-11-dbrazdil@google.com

Add hyp percpu section to linker script and rename the corresponding ELF
sections of hyp/nvhe object files. This moves all nVHE-specific percpu
variables to the new hyp percpu section.

Allocate sufficient amount of memory for all percpu hyp regions at global KVM
init time and create corresponding hyp mappings.

The base addresses of hyp percpu regions are kept in a dynamically allocated
array in the kernel.

Add NULL checks in PMU event-reset code as it may run before KVM memory is
initialized.
Signed-off-by: NDavid Brazdil <dbrazdil@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NWill Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-10-dbrazdil@google.com

Host CPU context is stored in a global per-cpu variable `kvm_host_data`.
In preparation for introducing independent per-CPU region for nVHE hyp,
create two separate instances of `kvm_host_data`, one for VHE and one
for nVHE.
Signed-off-by: NDavid Brazdil <dbrazdil@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NWill Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-9-dbrazdil@google.com

Hyp keeps track of which cores require SSBD callback by accessing a
kernel-proper global variable. Create an nVHE symbol of the same name
and copy the value from kernel proper to nVHE as KVM is being enabled
on a core.

Done in preparation for separating percpu memory owned by kernel
proper and nVHE.
Signed-off-by: NDavid Brazdil <dbrazdil@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NWill Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-8-dbrazdil@google.com

Defining a per-CPU variable in hyp/nvhe will result in its name being
prefixed with __kvm_nvhe_. Add helpers for declaring these variables
in kernel proper and accessing them with this_cpu_ptr and per_cpu_ptr.
Signed-off-by: NDavid Brazdil <dbrazdil@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NWill Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-7-dbrazdil@google.com

The hyp_adr/ldr_this_cpu helpers were introduced for use in hyp code
because they always needed to use TPIDR_EL2 for base, while
adr/ldr_this_cpu from kernel proper would select between TPIDR_EL2 and
_EL1 based on VHE/nVHE.

Simplify this now that the hyp mode case can be handled using the
__KVM_VHE/NVHE_HYPERVISOR__ macros.
Signed-off-by: NDavid Brazdil <dbrazdil@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NAndrew Scull <ascull@google.com>
Acked-by: NWill Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-6-dbrazdil@google.com

this_cpu_ptr is meant for use in kernel proper because it selects between
TPIDR_EL1/2 based on nVHE/VHE. __hyp_this_cpu_ptr was used in hyp to always
select TPIDR_EL2. Unify all users behind this_cpu_ptr and friends by
selecting _EL2 register under __KVM_NVHE_HYPERVISOR__. VHE continues
selecting the register using alternatives.

Under CONFIG_DEBUG_PREEMPT, the kernel helpers perform a preemption check
which is omitted by the hyp helpers. Preserve the behavior for nVHE by
overriding the corresponding macros under __KVM_NVHE_HYPERVISOR__. Extend
the checks into VHE hyp code.
Signed-off-by: NDavid Brazdil <dbrazdil@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NAndrew Scull <ascull@google.com>
Acked-by: NWill Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-5-dbrazdil@google.com

Minor cleanup that only creates __kvm_ex_table ELF section and
related symbols if CONFIG_KVM is enabled. Also useful as more
hyp-specific sections will be added.
Signed-off-by: NDavid Brazdil <dbrazdil@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NWill Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-4-dbrazdil@google.com