Create a boost TCAM entry for each tunnel port in order to get a tunnel
PTYPE. Update netdev feature flags and implement the appropriate logic to
get and set values for hardware offloads.
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NHenry Tieman <henry.w.tieman@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The flash memory for the ice hardware contains a block of information
used for link management called the Netlist module.

As this essentially represents another section of firmware, add its
version information to the output of the driver's .info_get handler.

This includes both a version and the first few bytes of a hash of the
module contents.

  fw.netlist -> the version information extracted from the netlist module
  fw.netlist.build-> first 4 bytes of the hash of the contents, similar
                     to fw.mgmt.build
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Oleksij Rempel says:

====================
provide KAPI for SQI

This patches are extending ethtool netlink interface to export Signal
Quality Index (SQI). SQI provided by 100Base-T1 PHYs and can be used for
cable diagnostic. Compared to a typical cable tests, this value can be
only used after link is established.

changes v3:
- rename __ethtool_get_sqi* to linkstate_get_sqi*. And move this
  functions to the net/ethtool/linkstate.c
- protect linkstate_get_sqi* with locking

changes v2:
- use u32 instead of u8 for SQI
- add SQI_MAX field and callbacks
- some style fixes in the rst.
- do not convert index to shifted index.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch implements reading of the Signal Quality Index for better
cable/link troubleshooting.
Signed-off-by: NOleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signal Quality Index is a mandatory value required by "OPEN Alliance
SIG" for the 100Base-T1 PHYs [1]. This indicator can be used for cable
integrity diagnostic and investigating other noise sources and
implement by at least two vendors: NXP[2] and TI[3].

[1] http://www.opensig.org/download/document/218/Advanced_PHY_features_for_automotive_Ethernet_V1.0.pdf
[2] https://www.nxp.com/docs/en/data-sheet/TJA1100.pdf
[3] https://www.ti.com/product/DP83TC811R-Q1Signed-off-by: NOleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Yuval Basson says:

====================
qed: Add xrc core support for RoCE

This patch adds support for configuring XRC and provides the necessary
APIs for rdma upper layer driver (qedr) to enable the XRC feature.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for XRC-SRQ's and XRC-QP's for upper layer driver.

We maintain separate bitmaps for resource management for srq and
xrc-srq, However, the range in FW is one, The xrc-srq's are first
and then the srq's follow. Therefore we maintain a srq-id offset.

v2: perform cleanups if XRC bitmpas allocation fail.
Signed-off-by: NMichal Kalderon <mkalderon@marvell.com>
Signed-off-by: NYuval Bason <ybason@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

First ILT page for TSDM client is allocated for XRC-SRQ's.
For regular SRQ's skip first ILT page that is reserved for
XRC-SRQ's.
Signed-off-by: NMichal Kalderon <mkalderon@marvell.com>
Signed-off-by: NYuval Bason <ybason@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, psample can only send the packet bits after decapsulation.
The tunnel information is lost. Add the tunnel support.

If the sampled packet has no tunnel info, the behavior is the same as
before. If it has, add a nested metadata field named PSAMPLE_ATTR_TUNNEL
and include the tunnel subfields if applicable.

Increase the metadata length for sampled packet with the tunnel info.
If new subfields of tunnel info should be included, update the metadata
length accordingly.
Signed-off-by: NChris Mi <chrism@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
1GbE Intel Wired LAN Driver Updates 2020-05-19

This series contains updates to igc only.

Sasha cleans up the igc driver code that is not used or needed.

Vitaly cleans up driver code that was used to support Virtualization on
a device that is not supported by igc, so remove the dead code.

Andre renames a few macros to align with register and field names
described in the data sheet.  Also adds the VLAN Priority Queue Fliter
and EType Queue Filter registers to the list of registers dumped by
igc_get_regs().  Added additional debug messages and updated return codes
for unsupported features.  Refactored the VLAN priority filtering code to
move the core logic into igc_main.c.  Cleaned up duplicate code and
useless code.
====================
Acked-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Al Viro says:

====================
uaccess-related stuff in net/*

Assorted uaccess-related work in net/*.  First, there's
getting rid of compat_alloc_user_space() mess in MCAST_...
[gs]etsockopt() - no need to play with copying to/from temporary
object on userland stack, etc., when ->compat_[sg]etsockopt()
instances in question can easly do everything without that.
That's the first 13 patches.  Then there's a trivial bit in
net/batman-adv (completely unrelated to everything else) and
finally getting the atm compat ioctls into simpler shape.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... and sod the compat_alloc_user_space() with its complications
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

atm_dev_ioctl() does copyin in two different ways - one for
ATM_GETNAMES, another for everything else.  Start with separating
the former into a new helper (atm_getnames()).  The next step
will be to lift the copyin into the callers.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

address is passed only to copy_to_user()
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

not used anymore
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Native ->setsockopt() handling of these options (MCAST_..._SOURCE_GROUP
and MCAST_{,UN}BLOCK_SOURCE) consists of copyin + call of a helper that
does the actual work.  The only change needed for ->compat_setsockopt()
is a slightly different copyin - the helpers can be reused as-is.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

direct parallel to the way these two are handled in the native
->setsockopt() instances - the helpers that do the real work
are already separated and can be reused as-is in this case.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

similar to the ipv4 counterpart of that patch - the same
trick used to align the tail array properly.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

that way we'll be able to reuse it for compat case
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Parallel to what the native setsockopt() does, except that unlike
the native setsockopt() we do not use memdup_user() - we want
the sockaddr_storage fields properly aligned, so we allocate
4 bytes more and copy compat_group_filter at the offset 4,
which yields the proper alignments.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

now we can do MCAST_MSFILTER in compat ->getsockopt() without
playing silly buggers with copying things back and forth.
We can form a native struct group_filter (sans the variable-length
tail) on stack, pass that + pointer to the tail of original request
to the helper doing the bulk of the work, then do the rest of
copyout - same as the native getsockopt() does.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

pass the userland pointer to the array in its tail, so that part
gets copied out by our functions; copyout of everything else is
done in the callers.  Rationale: reuse for compat; the array
is the same in native and compat, the layout of parts before it
is different for compat.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

We want to check if optname is among the MCAST_... ones; do that as
an explicit switch.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

We want to get rid of compat_mc_[sg]etsockopt() and to have that stuff
handled without compat_alloc_user_space(), extra copying through
userland, etc.  To do that we'll need ipv4 and ipv6 instances of
->compat_[sg]etsockopt() to manipulate the 32bit variants of mcast
requests, so we need to move the definitions of those out of net/compat.c
and into a public header.

This patch just does a mechanical move to include/net/compat.h
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The conversion to pin_user_pages() had a bug: it overlooked
the case of allocation of pages failing. Fix that by restoring
an equivalent check.

Reported-by: syzbot+118ac0af4ac7f785a45b@syzkaller.appspotmail.com
Fixes: dbfe7d74 ("rds: convert get_user_pages() --> pin_user_pages()")

Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Cc: linux-rdma@vger.kernel.org
Cc: rds-devel@oss.oracle.com
Signed-off-by: NJohn Hubbard <jhubbard@nvidia.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb_gro_receive() used to be used by SCTP, it is no longer the case.

skb_gro_receive_list() is in the same category : never used from modules.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tx data FIFO Head/Tail, Saved and Packet Count registers
not applicable for i225 LAN controller.
This patch comes to clean up these registers.
Signed-off-by: NSasha Neftin <sasha.neftin@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Device reset assert for interrupt cause register not in
use for i225 device.
This patch comes to clean up this define.
Signed-off-by: NSasha Neftin <sasha.neftin@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds the EType Queue Filter (ETQF) registers to the list of
registers dumped by igc_get_regs().
Signed-off-by: NAndre Guedes <andre.guedes@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The whole ethertype filtering code is implemented in igc_ethtool.c and
mixes logic from ethtool and core parts. This patch refactors it so core
logic is moved to igc_main.c, aligning the ethertype filtering code
organization with the rest of the filtering code from the driver (MAC
address and VLAN priority).

Besides moving code to igc_main.c, this patch also does some minor
improvements to the code. Below are some highlights.

In case all filters are already in use and the user tries to add another
filter, we return -ENOSPC instead of -EINVAL so a more meaningful error
code is provided. This also aligns with the behavior implemented in MAC
address filtering code.

With this code refactoring, 'etype_bitmap' array in struct igc_adapter
and 'etype_reg_index' in struct igc_nfc_filter are not needed anymore
and are removed.

Log messages are added to help debugging the ethertype filtering code.
Signed-off-by: NAndre Guedes <andre.guedes@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Christoph Hellwig says:

====================
add a new ->ndo_tunnel_ctl method to avoid a few set_fs calls v2

both the ipv4 and ipv6 code have an ioctl each that can be used to create
a tunnel using code that doesn't live in the core kernel or ipv6 module.
Currently they call ioctls on the tunnel devices to create these, for
which the code needs to override the address limit, which is a "feature"
I plan to get rid of.

Instead this patchset adds a new ->ndo_tunnel_ctl that can be used for
the tunnel configuration using struct ip_tunnel_parm.  The method is
either invoked from a helper that does the uaccess and can be wired up
as ndo_do_ioctl method, or directly from the magic IPV4/6 ioctls that
create tunnels with kernel space arguments.

Changes since v2:
 - properly propagate errors in ipip6_tunnel_prl_ctl
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the new ->ndo_tunnel_ctl instead of overriding the address limit
and using ->ndo_do_ioctl just to do a pointless user copy.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Factor out a addrconf_set_sit_dstaddr helper for the actual work if we
found a SIT device, and only hold the rtnl lock around the device lookup
and that new helper, as there is no point in holding it over a
copy_from_user call.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no point in copying the structure from userspace or looking up
a device if SIT support is not disabled and we'll eventually return
-ENODEV anyway.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>