Allow overrides on the command line.

v2: agd: sqaush in spelling fix and bogus default value warning
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NRoger He <Hongbo.He@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

adds fragment_size in the vm_manager structure and
implements hardware setup for it.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NRoger He <Hongbo.He@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Needs to be done when the MC is set up.
Acked-by: NChristian König <christian.koenig@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Rename symbols from gtt_ to gart_ as appropriate.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Not used any more.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Stop spreading the code over all GMC generations.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These are no longer needed now that we use the fb_location
programmed by the vbios.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No need to do this as the vbios does this for us.  As such
we no longer need to stop the mc during init.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This makes mc programming much simpler in future patches.

Since evergreen, the vbios has been programming the fb location
to the proper vram size.  The only reason to reprogram it would
be to change the location.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Something writes over the first 8 MB so reserve this
on vega10 until we root cause it.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Rename adjust_mc_addr to get_vm_pde and check the address bits in one place.

v2: handle vcn as well, keep setting the valid bit manually,
    add a BUG_ON() for GMC v6, v7 and v8 as well.
v3: handle vcn_v1_0_enc_ring_emit_vm_flush as well.
v4: fix the BUG_ON mask for GFX6-8
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

VM is mandatory for all hw amdgpu supports. So remove the leftovers
to make it optionally.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reinitializing the VM manager during suspend/resume is a very very bad
idea since all the VMs are still active and kicking.

This can lead to random VM faults after resume when new processes
become the same client ID assigned.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Reinitializing the VM manager during suspend/resume is a very very bad
idea since all the VMs are still active and kicking.

This can lead to random VM faults after resume when new processes
become the same client ID assigned.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Include <drm/*.h> instead of relative path from include/drm, then
remove the -Iinclude/drm compiler flag.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1493009447-31524-4-git-send-email-yamada.masahiro@socionext.com

v2: address Alex's comment, add AMDGPU_DEFAULT_GTT_SIZE_MB.
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This way GFX and MM won't fight for VMIDs any more.

Initially disabled since we need to stop flushing all HUBS
at the same time as well.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAndres Rodriguez <andresx7@gmail.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

By default, the value is set by individual gmc.
if a specific value is input, it overrides the global value for all

v2: create helper funcs
v3: update gmc9 APU's num_level athough it may be updated in the future.
Signed-off-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set reasonable defaults per family.

v2: set both of them in gmc
v3: move vm size and block size in vm manager
v4: squash in warning fix from Alex Xie
v5: squash in min() warning fix
Signed-off-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

On KB, KV, CZ we should read the vram width from integrated system
table, if we can. The NOOFCHAN in MC_SHARED_CHMAP is not accurate.

With this change we can enable two 4k displays on CZ again. This use
case was broken sometime in January when we started looking at
vram_width for bandwidth calculations instead of hardcoding this value.

v2:
  Return 0 if integrated system info table is not available.
Tested-by: NRoman Li <roman.li@amd.com>
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Needs to be filled with handling.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This lets each asic set whichever flags it supports.
Signed-off-by: NAlex Xie <AlexBin.Xie@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set asic specific gart pte flags in the gmc IP module for
each asic.
Signed-off-by: NAlex Xie <AlexBin.Xie@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Necessary for new asics.
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The contextID field (formerly known as src_data) of the IH
vector stores client specific information about an interrupt.
It was expanded from 32 bits to 128 on newer asics.  Expand the
src_id field to handle this.
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer asics have a two levels of irq ids now:
client id - the IP
src id - the interrupt src within the IP

v2: integrated Christian's comments.
v3: fix rebase fail in SI and CIK
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NKen Wang <Qingqing.Wang@amd.com>
Reviewed-by: NKen Wang <Qingqing.Wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: agd: move apertures to mc structure
Signed-off-by: NFlora Cui <Flora.Cui@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use a more common logging style.

Miscellanea:

o Coalesce formats and realign arguments
o Neaten a few macros now using pr_<level>
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable/disable the handling globally for now and
print a warning when we enable it for the first time.

v2: set correct register
Signed-off-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NNicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We don't need to use the PCI BAR on APUs. This allows us to access
the full VRAM directly without being limited by the BAR size.

v2: squash in 64bit shift fix
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit a693e050.

This breaks on systems with huge amounts of system memory as we do not have
enough vram to store the page tables.  Additionally, this is less of an issue
with the recent gtt manager changes.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It can be the case that upon GPU page faults we start trashing
the logs, and so let us ratelimit here to avoid that.

V2. Fix issue where calling dev_err_ratelimited separately for
    each line means that some lines corresponding to a single
    VM fault may or may not appear depending on the rate.
    - Michel Dänzer.

Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This makes it easier to replace specific IP blocks on
asics for handling virtual_dce, DAL, etc. and for building
IP lists for hw or tables.  This also stored the status
information in the same structure.

v2: split out spelling fix into a separate patch
    add a function to add IPs to the list
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In an if block for (running == 0) running cannot be non-zero.

v2: agd: remove unused variable
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NKen Wang <Qingqing.Wang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Looks like this got missed when we ported the code from radeon.
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Looks like this got missed when we ported the code from radeon.
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Only used in the gmc IP modules so just call the local
function directly.
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>