we only use that to tell copy_thread() done by syscall from that
done by kernel_thread().  However, it's easier to do simply by
checking PF_KTHREAD in thread flags.

Merge sys_clone() guts for 32bit and 64bit, while we are at it...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... rather than duplicating that in sigframe setup code (and doing that
inconsistently, at that)
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... assuming it's needed to be done at all
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

most of the architectures don't and there's not a single
caller outside of core kernel.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

TIF_NOTIFY_RESUME will work in precisely the same way; all that
is achieved by TIF_IRET is appearing that there's some work to be
done, so we end up on the iret exit path.  Just use NOTIFY_RESUME.
And for execve() do that in 32bit start_thread(), not sys_execve()
itself.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Pull block fixes from Jens Axboe:
 "A small collection of driver fixes/updates and a core fix for 3.6.  It
  contains:

   - Bug fixes for mtip32xx, and support for new hardware (just addition
     of IDs).  They have been queued up for 3.7 for a few weeks as well.

   - rate-limit a failing command error message in block core.

   - A fix for an old cciss bug from Stephen.

   - Prevent overflow of partition count from Alan."

* 'for-linus' of git://git.kernel.dk/linux-block:
  cciss: fix handling of protocol error
  blk: add an upper sanity check on partition adding
  mtip32xx: fix user_buffer check in exec_drive_command
  mtip32xx: Remove dead code
  mtip32xx: Change printk to pr_xxxx
  mtip32xx: Proper reporting of write protect status on big-endian
  mtip32xx: Increase timeout for standby command
  mtip32xx: Handle NCQ commands during the security locked state
  mtip32xx: Add support for new devices
  block: rate-limit the error message from failing commands

Pull SuperH fixes from Paul Mundt.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
  sh: Fix up TIF_NOTIFY_RESUME sans TIF_SIGPENDING handling.
  sh: pfc: Release spinlock in sh_pfc_gpio_request_enable() error path
  sh: intc: Fix up multi-evt irq association.

Pull rpmsg fix from Ohad Ben-Cohen:
 "A quick rpmsg fix from Fernando, fixing two buggy invocations of
  dma_free_coherent"

* tag 'rpmsg-3.6-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg:
  rpmsg: fix dma_free_coherent dev parameter

Pull md fixes from NeilBrown:
 "3 fixes for md in 3.6.

  One reverts a recent patch which turns out to not be such a good idea.

  Other two fix minor bugs with the new (since 3.3) 'replacement' code
  and have been tagged for -stable."

* tag 'md-3.6-fixes' of git://neil.brown.name/md:
  md: make sure metadata is updated when spares are activated or removed.
  md/raid5: fix calculate of 'degraded' when a replacement becomes active.
  Revert "md/raid5: For odirect-write performance, do not set STRIPE_PREREAD_ACTIVE."

Pull workqueue / powernow-k8 fix from Tejun Heo:
 "This is the fix for the bug where cpufreq/powernow-k8 was tripping
  BUG_ON() in try_to_wake_up_local() by migrating workqueue worker to a
  different CPU.

    https://bugzilla.kernel.org/show_bug.cgi?id=47301

  As discussed, the fix is now two parts - one to reimplement
  work_on_cpu() so that it doesn't create a new kthread each time and
  the actual fix which makes powernow-k8 use work_on_cpu() instead of
  performing manual migration.

  While pretty late in the merge cycle, both changes are on the safer
  side.  Jiri and I verified two existing users of work_on_cpu() and
  Duncan confirmed that the powernow-k8 fix survived about 18 hours of
  testing."

* 'for-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  cpufreq/powernow-k8: workqueue user shouldn't migrate the kworker to another CPU
  workqueue: reimplement work_on_cpu() using system_wq

powernowk8_target() runs off a per-cpu work item and if the
cpufreq_policy->cpu is different from the current one, it migrates the
kworker to the target CPU by manipulating current->cpus_allowed.  The
function migrates the kworker back to the original CPU but this is
still broken.  Workqueue concurrency management requires the kworkers
to stay on the same CPU and powernowk8_target() ends up triggerring
BUG_ON(rq != this_rq()) in try_to_wake_up_local() if it contends on
fidvid_mutex and sleeps.

It is unclear why this bug is being reported now.  Duncan says it
appeared to be a regression of 3.6-rc1 and couldn't reproduce it on
3.5.  Bisection seemed to point to 63d95a91 "workqueue: use @pool
instead of @gcwq or @cpu where applicable" which is an non-functional
change.  Given that the reproduce case sometimes took upto days to
trigger, it's easy to be misled while bisecting.  Maybe something made
contention on fidvid_mutex more likely?  I don't know.

This patch fixes the bug by using work_on_cpu() instead if @pol->cpu
isn't the same as the current one.  The code assumes that
cpufreq_policy->cpu is kept online by the caller, which Rafael tells
me is the case.

stable: ed48ece2 ("workqueue: reimplement work_on_cpu() using
        system_wq") should be applied before this; otherwise, the
        behavior could be horrible.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NDuncan <1i5t5.duncan@cox.net>
Tested-by: NDuncan <1i5t5.duncan@cox.net>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: stable@vger.kernel.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47301

The existing work_on_cpu() implementation is hugely inefficient.  It
creates a new kthread, execute that single function and then let the
kthread die on each invocation.

Now that system_wq can handle concurrent executions, there's no
advantage of doing this.  Reimplement work_on_cpu() using system_wq
which makes it simpler and way more efficient.

stable: While this isn't a fix in itself, it's needed to fix a
        workqueue related bug in cpufreq/powernow-k8.  AFAICS, this
        shouldn't break other existing users.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@vger.kernel.org

It isn't always necessary to update the metadata when spares are
removed as the presence-or-not of a spare isn't really important to
the integrity of an array.
Also activating a spare doesn't always require updating the metadata
as the update on 'recovery-completed' is usually sufficient.

However the introduction of 'replacement' devices have made these
transitions sometimes more important.  For example the 'Replacement'
flag isn't cleared until the original device is removed, so we need
to ensure a metadata update after that 'spare' is removed.

So set MD_CHANGE_DEVS whenever a spare is activated or removed, to
complement the current situation where it is set when a spare is added
or a device is failed (or a number of other less common situations).

This is suitable for -stable as out-of-data metadata could lead
to data corruption.
This is only relevant for 3.3 and later 9when 'replacement' as
introduced.

Cc: stable@vger.kernel.org
Signed-off-by: NNeilBrown <neilb@suse.de>

When a replacement device becomes active, we mark the device that it
replaces as 'faulty' so that it can subsequently get removed.
However 'calc_degraded' only pays attention to the primary device, not
the replacement, so the array appears to become degraded, which is
wrong.

So teach 'calc_degraded' to consider any replacement if a primary
device is faulty.

This is suitable for -stable as an incorrect 'degraded' value can
confuse md and could lead to data corruption.
This is only relevant for 3.3 and later.

Cc: stable@vger.kernel.org
Reported-by: NRobin Hill <robin@robinhill.me.uk>
Reported-by: NJohn Drescher <drescherjm@gmail.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

This reverts commit 895e3c5c.

While this patch seemed like a good idea and did help some workloads,
it hurts other workloads.
Large sequential O_DIRECT writes were faster,
Small random O_DIRECT writes were slower.

Other changes (batching RAID5 writes) have improved the sequential
writes using a different mechanism, so the net result of this patch
is definitely negative.  So revert it.
Reported-by: NShaohua Li <shli@kernel.org>
Tested-by: NJianpeng Ma <majianpeng@gmail.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

Pull hwspinlock fix from Ohad Ben-Cohen:
 "A single hwspinlock fix by Wei Yongjun, which prevents potential NULL
  dereferences"

* tag 'hwspinlock-3.6-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock:
  hwspinlock/core: move the dereference below the NULL test

IBM reported a soft lockup after applying the fix for the rename_lock
deadlock.  Commit c83ce989 ("VFS: Fix the nfs sillyrename regression
in kernel 2.6.38") was found to be the culprit.

The nfs sillyrename fix used DCACHE_DISCONNECTED to indicate that the
dentry was killed.  This flag can be set on non-killed dentries too,
which results in infinite retries when trying to traverse the dentry
tree.

This patch introduces a separate flag: DCACHE_DENTRY_KILLED, which is
only set in d_kill() and makes try_to_ascend() test only this flag.

IBM reported successful test results with this patch.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If a command completes with a status of CMD_PROTOCOL_ERR, this
information should be conveyed to the SCSI mid layer, not dropped
on the floor.  Unlike a similar bug in the hpsa driver, this bug
only affects tape drives and CD and DVD ROM drives in the cciss
driver, and to induce it, you have to disconnect (or damage) a
cable, so it is not a very likely scenario (which would explain
why the bug has gone undetected for the last 10 years.)
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJens Axboe <axboe@kernel.dk>

65536 should be ludicrous anyway but without it we overflow the
memory computation doing the allocation and badness occurs.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

As Al notes, we missed a TIF_NOTIFY_RESUME check which caused any
handlers without TIF_SIGPENDING also set to skip the notification:

	Looks like while it is in the relevant masks *and* checked in
	do_notify_resume() both on 32bit and 64bit variants since commit
	ab99c733 ("sh: Make syscall tracer
	use tracehook notifiers, add TIF_NOTIFY_RESUME.") they are
	actually *not* reached without simulataneous SIGPENDING, since
	the actual glue in the callers had not been updated back then and
	still checks for _TIF_SIGPENDING alone when deciding whether to
	hit do_notify_resume() or not.
Reported-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Tested-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The sh_pfc_gpio_request_enable() function acquires a spinlock but fails
to release it before returning if the requested mux type is not
supported. Fix this.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Pull another workqueue fix from Tejun Heo:
 "Unfortunately, yet another late fix.  This too is discovered and fixed
  by Lai.  This bug was introduced during this merge window by commit
  25511a47 ("workqueue: reimplement CPU online rebinding to handle
  idle workers") which started using WORKER_REBIND flag for idle rebind
  too.

  The bug is relatively easy to trigger if the CPU rapidly goes through
  off, on and then off (and stay off).  The fix is on the safer side.
  This hasn't been on linux-next yet but I'm pushing early so that it
  can get more exposure before v3.6 release."

* 'for-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: always clear WORKER_REBIND in busy_worker_rebind_fn()

busy_worker_rebind_fn() didn't clear WORKER_REBIND if rebinding failed
(CPU is down again).  This used to be okay because the flag wasn't
used for anything else.

However, after 25511a47 "workqueue: reimplement CPU online rebinding
to handle idle workers", WORKER_REBIND is also used to command idle
workers to rebind.  If not cleared, the worker may confuse the next
CPU_UP cycle by having REBIND spuriously set or oops / get stuck by
prematurely calling idle_worker_rebind().

  WARNING: at /work/os/wq/kernel/workqueue.c:1323 worker_thread+0x4cd/0x5
 00()
  Hardware name: Bochs
  Modules linked in: test_wq(O-)
  Pid: 33, comm: kworker/1:1 Tainted: G           O 3.6.0-rc1-work+ #3
  Call Trace:
   [<ffffffff8109039f>] warn_slowpath_common+0x7f/0xc0
   [<ffffffff810903fa>] warn_slowpath_null+0x1a/0x20
   [<ffffffff810b3f1d>] worker_thread+0x4cd/0x500
   [<ffffffff810bc16e>] kthread+0xbe/0xd0
   [<ffffffff81bd2664>] kernel_thread_helper+0x4/0x10
  ---[ end trace e977cf20f4661968 ]---
  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: [<ffffffff810b3db0>] worker_thread+0x360/0x500
  PGD 0
  Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
  Modules linked in: test_wq(O-)
  CPU 0
  Pid: 33, comm: kworker/1:1 Tainted: G        W  O 3.6.0-rc1-work+ #3 Bochs Bochs
  RIP: 0010:[<ffffffff810b3db0>]  [<ffffffff810b3db0>] worker_thread+0x360/0x500
  RSP: 0018:ffff88001e1c9de0  EFLAGS: 00010086
  RAX: 0000000000000000 RBX: ffff88001e633e00 RCX: 0000000000004140
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000009
  RBP: ffff88001e1c9ea0 R08: 0000000000000000 R09: 0000000000000001
  R10: 0000000000000002 R11: 0000000000000000 R12: ffff88001fc8d580
  R13: ffff88001fc8d590 R14: ffff88001e633e20 R15: ffff88001e1c6900
  FS:  0000000000000000(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 0000000000000000 CR3: 00000000130e8000 CR4: 00000000000006f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process kworker/1:1 (pid: 33, threadinfo ffff88001e1c8000, task ffff88001e1c6900)
  Stack:
   ffff880000000000 ffff88001e1c9e40 0000000000000001 ffff88001e1c8010
   ffff88001e519c78 ffff88001e1c9e58 ffff88001e1c6900 ffff88001e1c6900
   ffff88001e1c6900 ffff88001e1c6900 ffff88001fc8d340 ffff88001fc8d340
  Call Trace:
   [<ffffffff810bc16e>] kthread+0xbe/0xd0
   [<ffffffff81bd2664>] kernel_thread_helper+0x4/0x10
  Code: b1 00 f6 43 48 02 0f 85 91 01 00 00 48 8b 43 38 48 89 df 48 8b 00 48 89 45 90 e8 ac f0 ff ff 3c 01 0f 85 60 01 00 00 48 8b 53 50 <8b> 02 83 e8 01 85 c0 89 02 0f 84 3b 01 00 00 48 8b 43 38 48 8b
  RIP  [<ffffffff810b3db0>] worker_thread+0x360/0x500
   RSP <ffff88001e1c9de0>
  CR2: 0000000000000000

There was no reason to keep WORKER_REBIND on failure in the first
place - WORKER_UNBOUND is guaranteed to be set in such cases
preventing incorrectly activating concurrency management.  Always
clear WORKER_REBIND.

tj: Updated comment and description.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Merge fixes from Andrew Morton:
 "13 patches.  12 are fixes and one is a little preparatory thing for
  Andi."

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (13 commits)
  memory hotplug: fix section info double registration bug
  mm/page_alloc: fix the page address of higher page's buddy calculation
  drivers/rtc/rtc-twl.c: ensure all interrupts are disabled during probe
  compiler.h: add __visible
  pid-namespace: limit value of ns_last_pid to (0, max_pid)
  include/net/sock.h: squelch compiler warning in sk_rmem_schedule()
  slub: consider pfmemalloc_match() in get_partial_node()
  slab: fix starting index for finding another object
  slab: do ClearSlabPfmemalloc() for all pages of slab
  nbd: clear waiting_queue on shutdown
  MAINTAINERS: fix TXT maintainer list and source repo path
  mm/ia64: fix a memory block size bug
  memory hotplug: reset pgdat->kswapd to NULL if creating kernel thread fails

There may be a bug when registering section info.  For example, on my
Itanium platform, the pfn range of node0 includes the other nodes, so
other nodes' section info will be double registered, and memmap's page
count will equal to 3.

  node0: start_pfn=0x100,    spanned_pfn=0x20fb00, present_pfn=0x7f8a3, => 0x000100-0x20fc00
  node1: start_pfn=0x80000,  spanned_pfn=0x80000,  present_pfn=0x80000, => 0x080000-0x100000
  node2: start_pfn=0x100000, spanned_pfn=0x80000,  present_pfn=0x80000, => 0x100000-0x180000
  node3: start_pfn=0x180000, spanned_pfn=0x80000,  present_pfn=0x80000, => 0x180000-0x200000

  free_all_bootmem_node()
	register_page_bootmem_info_node()
		register_page_bootmem_info_section()

When hot remove memory, we can't free the memmap's page because
page_count() is 2 after put_page_bootmem().

  sparse_remove_one_section()
	free_section_usemap()
		free_map_bootmem()
			put_page_bootmem()

[akpm@linux-foundation.org: add code comment]
Signed-off-by: NXishi Qiu <qiuxishi@huawei.com>
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The heuristic method for buddy has been introduced since commit
43506fad ("mm/page_alloc.c: simplify calculation of combined index
of adjacent buddy lists").  But the page address of higher page's buddy
was wrongly calculated, which will lead page_is_buddy to fail for ever.
IOW, the heuristic method would be disabled with the wrong page address
of higher page's buddy.

Calculating the page address of higher page's buddy should be based
higher_page with the offset between index of higher page and index of
higher page's buddy.
Signed-off-by: NHaifeng Li <omycle@gmail.com>
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Cc: KyongHo Cho <pullip.cho@samsung.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: <stable@vger.kernel.org>	[2.6.38+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On some platforms, bootloaders are known to do some interesting RTC
programming.  Without going into the obscurities as to why this may be
the case, suffice it to say the the driver should not make any
assumptions about the state of the RTC when the driver loads.  In
particular, the driver probe should be sure that all interrupts are
disabled until otherwise programmed.

This was discovered when finding bursty I2C traffic every second on
Overo platforms.  This I2C overhead was keeping the SoC from hitting
deep power states.  The cause was found to be the RTC firing every
second on the I2C-connected TWL PMIC.

Special thanks to Felipe Balbi for suggesting to look for a rogue driver
as the source of the I2C traffic rather than the I2C driver itself.

Special thanks to Steve Sakoman for helping track down the source of the
continuous RTC interrups on the Overo boards.
Signed-off-by: NKevin Hilman <khilman@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Tested-by: NSteve Sakoman <steve@sakoman.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Tested-by: NShubhrajyoti Datta <omaplinuxkernel@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

gcc 4.6+ has support for a externally_visible attribute that prevents the
optimizer from optimizing unused symbols away.  Add a __visible macro to
use it with that compiler version or later.

This is used (at least) by the "Link Time Optimization" patchset.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kernel doesn't check the pid for negative values, so if you try to
write -2 to /proc/sys/kernel/ns_last_pid, you will get a kernel panic.

The crash happens because the next pid is -1, and alloc_pidmap() will
try to access to a nonexistent pidmap.

  map = &pid_ns->pidmap[pid/BITS_PER_PAGE];
Signed-off-by: NAndrew Vagin <avagin@openvz.org>
Acked-by: NCyrill Gorcunov <gorcunov@openvz.org>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This warning:

  In file included from linux/include/linux/tcp.h:227:0,
                   from linux/include/linux/ipv6.h:221,
                   from linux/include/net/ipv6.h:16,
                   from linux/include/linux/sunrpc/clnt.h:26,
                   from linux/net/sunrpc/stats.c:22:
  linux/include/net/sock.h: In function `sk_rmem_schedule':
  linux/nfs-2.6/include/net/sock.h:1339:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]

is seen with gcc (GCC) 4.6.3 20120306 (Red Hat 4.6.3-2) using the
-Wextra option.

Commit c76562b6 ("netvm: prevent a stream-specific deadlock")
accidentally replaced the "size" parameter of sk_rmem_schedule() with an
unsigned int.  This changes the semantics of the comparison in the
return statement.

In sk_wmem_schedule we have syntactically the same comparison, but
"size" is a signed integer.  In addition, __sk_mem_schedule() takes a
signed integer for its "size" parameter, so there is an implicit type
conversion in sk_rmem_schedule() anyway.

Revert the "size" parameter back to a signed integer so that the
semantics of the expressions in both sk_[rw]mem_schedule() are exactly
the same.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

get_partial() is currently not checking pfmemalloc_match() meaning that
it is possible for pfmemalloc pages to leak to non-pfmemalloc users.
This is a problem in the following situation.  Assume that there is a
request from normal allocation and there are no objects in the per-cpu
cache and no node-partial slab.

In this case, slab_alloc enters the slow path and new_slab_objects() is
called which may return a PFMEMALLOC page.  As the current user is not
allowed to access PFMEMALLOC page, deactivate_slab() is called
([5091b74a: mm: slub: optimise the SLUB fast path to avoid pfmemalloc
checks]) and returns an object from PFMEMALLOC page.

Next time, when we get another request from normal allocation,
slab_alloc() enters the slow-path and calls new_slab_objects().  In
new_slab_objects(), we call get_partial() and get a partial slab which
was just deactivated but is a pfmemalloc page.  We extract one object
from it and re-deactivate.

  "deactivate -> re-get in get_partial -> re-deactivate" occures repeatedly.

As a result, access to PFMEMALLOC page is not properly restricted and it
can cause a performance degradation due to frequent deactivation.
deactivation frequently.

This patch changes get_partial_node() to take pfmemalloc_match() into
account and prevents the "deactivate -> re-get in get_partial()
scenario.  Instead, new_slab() is called.
Signed-off-by: NJoonsoo Kim <js1304@gmail.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In array cache, there is a object at index 0, check it.
Signed-off-by: NJoonsoo Kim <js1304@gmail.com>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Right now, we call ClearSlabPfmemalloc() for first page of slab when we
clear SlabPfmemalloc flag.  This is fine for most swap-over-network use
cases as it is expected that order-0 pages are in use.  Unfortunately it
is possible that that __ac_put_obj() checks SlabPfmemalloc on a tail
page and while this is harmless, it is sloppy.  This patch ensures that
the head page is always used.

This problem was originally identified by Joonsoo Kim.

[js1304@gmail.com: Original implementation and problem identification]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix a serious but uncommon bug in nbd which occurs when there is heavy
I/O going to the nbd device while, at the same time, a failure (server,
network) or manual disconnect of the nbd connection occurs.

There is a small window between the time that the nbd_thread is stopped
and the socket is shutdown where requests can continue to be queued to
nbd's internal waiting_queue.  When this happens, those requests are
never completed or freed.

The fix is to clear the waiting_queue on shutdown of the nbd device, in
the same way that the nbd request queue (queue_head) is already being
cleared.
Signed-off-by: NPaul Clements <paul.clements@steeleye.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NGang Wei <gang.wei@intel.com>
Cc: Richard L Maliszewski <richard.l.maliszewski@intel.com>
Cc: Gang Wei <gang.wei@intel.com>
Cc: Shane Wang <shane.wang@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I found following definition in include/linux/memory.h, in my IA64
platform, SECTION_SIZE_BITS is equal to 32, and MIN_MEMORY_BLOCK_SIZE
will be 0.

  #define MIN_MEMORY_BLOCK_SIZE     (1 << SECTION_SIZE_BITS)

Because MIN_MEMORY_BLOCK_SIZE is int type and length of 32bits,
so MIN_MEMORY_BLOCK_SIZE(1 << 32) will will equal to 0.
Actually when SECTION_SIZE_BITS >= 31, MIN_MEMORY_BLOCK_SIZE will be wrong.
This will cause wrong system memory infomation in sysfs.
I think it should be:

  #define MIN_MEMORY_BLOCK_SIZE     (1UL << SECTION_SIZE_BITS)

And "echo offline > memory0/state" will cause following call trace:

  kernel BUG at mm/memory_hotplug.c:885!
  sh[6455]: bugcheck! 0 [1]
  Pid: 6455, CPU 0, comm:                   sh
  psr : 0000101008526030 ifs : 8000000000000fa4 ip  : [<a0000001008c40f0>]    Not tainted (3.6.0-rc1)
  ip is at offline_pages+0x210/0xee0
  Call Trace:
    show_stack+0x80/0xa0
    show_regs+0x640/0x920
    die+0x190/0x2c0
    die_if_kernel+0x50/0x80
    ia64_bad_break+0x3d0/0x6e0
    ia64_native_leave_kernel+0x0/0x270
    offline_pages+0x210/0xee0
    alloc_pages_current+0x180/0x2a0
Signed-off-by: NJianguo Wu <wujianguo@huawei.com>
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If kthread_run() fails, pgdat->kswapd contains errno.  When we stop this
thread, we only check whether pgdat->kswapd is NULL and access it.  If
it contains errno, it will cause page fault.  Reset pgdat->kswapd to
NULL when creating kernel thread fails can avoid this problem.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Reviewed-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>