Correct the following bugs introduced by commit
67cc0161:

- remove one remaining and now incorrect baud_table[] usage
- "baud +=" is no longer correct

The former bug was spotted by the Coverity checker.

Rolf Eike Beer spotted a bug in the initial version of my patch.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

My fancy new swsusp IO code had a big memory leak.  It's somewhat invisible
because the whole mem_map[] gets overwritten after resume, but it can cause us
to get low on memory during the actual suspend process.

Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

drivers/acpi/processor_idle.c:1112: warning: 'smp_callback' defined but not used

Cc: Len Brown <lenb@kernel.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A recent change to the vmalloc() code accidentally resulted in us passing
__GFP_ZERO into the slab allocator.  But we only wanted __GFP_ZERO for the
actual pages whcih are being vmalloc()ed, and passing __GFP_ZERO into slab is
not a rational thing to ask for.

Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix October-only BCD-to-binary conversion bug:

	0x08 -> 7
	0x09 -> 8
	0x10 -> 15 (!)
	0x11 -> 19

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=7361

Cc: Raphael Assenat <raph@raphnet.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove dependency of w1 subsytem from connector, only w1_con must depend on
it.  With attached patch applied to vanilla 2.6.19-git things works fine.
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: <dmb@pochta.ru>
Cc: Greg KH <greg@kroah.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Adrian Bunk <bunk@stusta.de>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We need to encode a decode the 'file' part of a handle.  We simply use the
inode number and generation number to construct the filehandle.

The generation number is the time when the file was created.  As inode numbers
cycle through the full 32 bits before being reused, there is no real chance of
the same inum being allocated to different files in the same second so this is
suitably unique.  Using time-of-day rather than e.g.  jiffies makes it less
likely that the same filehandle can be created after a reboot.

In order to be able to decode a filehandle we need to be able to lookup by
inum, which means that the inode needs to be added to the inode hash table
(tmpfs doesn't currently hash inodes as there is never a need to lookup by
inum).  To avoid overhead when not exporting, we only hash an inode when it is
first exported.  This requires a lock to ensure it isn't hashed twice.

This code is separate from the patch posted in June06 from Atal Shargorodsky
which provided the same functionality, but does borrow slightly from it.

Locking comment: Most filesystems that hash their inodes do so at the point
where the 'struct inode' is initialised, and that has suitable locking
(I_NEW).  Here in shmem, we are hashing the inode later, the first time we
need an NFS file handle for it.  We no longer have I_NEW to ensure only one
thread tries to add it to the hash table.

Cc: Atal Shargorodsky <atal@codefidence.com>
Cc: Gilad Ben-Yossef <gilad@codefidence.com>
Signed-off-by: NDavid M. Grimes <dgrimes@navisite.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Acked-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This library function should be in obj-y and not in lib-y.  But when we do
that it clashes unpleasantly with the assembly-language implementation in the
ia64 architecture.

Instead of trying to fix it all up, just remove the generic carta_random32 in
the expectation that the recently-made-generic random32() will suffice.

If/when perfmon is migrated to random32, ia64's private carta_random32
implementation can also be removed.

Cc: Stephane Eranian <eranian@hpl.hp.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make net_random() more widely available by calling it random32

akpm: hopefully this will permit the removal of carta_random32.  That needs
confirmation from Stephane - this code looks somewhat more computationally
expensive, and has a different (ie: callee-stateful) interface.

[akpm@osdl.org: lots of build fixes, cleanups]
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Cc: Stephane Eranian <eranian@hpl.hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Actually, the decimal representation of a 32-bit signed number can take 12
bytes, including the \0.

And then some code adds a \n as well, so let's give it 13 bytes.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The integer divisions in the timer accounting code can round the result
down to 0.  Adding 0 is without effect and the signal delivery stops.

Clamp the division result to minimum 1 to avoid this.

Problem was reported by Seongbae Park <spark@google.com>, who provided
also an inital patch.

Roland sayeth:

  I have had some more time to think about the problem, and to reproduce it
  using Toyo's test case.  For the record, if my understanding of the problem
  is correct, this happens only in one very particular case.  First, the
  expiry time has to be so soon that in cputime_t units (usually 1s/HZ ticks)
  it's < nthreads so the division yields zero.  Second, it only affects each
  thread that is so new that its CPU time accumulation is zero so now+0 is
  still zero and ->it_*_expires winds up staying zero.  For the VIRT and PROF
  clocks when cputime_t is tick granularity (or the SCHED clock on
  configurations where sched_clock's value only advances on clock ticks), this
  is not hard to arrange with new threads starting up and blocking before they
  accumulate a whole tick of CPU time.  That's what happens in Toyo's test
  case.

  Note that in general it is fine for that division to round down to zero,
  and set each thread's expiry time to its "now" time.  The problem only
  arises with thread's whose "now" value is still zero, so that now+0 winds up
  0 and is interpreted as "not set" instead of ">= now".  So it would be a
  sufficient and more precise fix to just use max(ticks, 1) inside the loop
  when setting each it_*_expires value.

  But, it does no harm to round the division up to one and always advance
  every thread's expiry time.  If the thread didn't already fire timers for
  the expiry time of "now", there is no expectation that it will do so before
  the next tick anyway.  So I followed Thomas's patch in lifting the max out
  of the loops.

  This patch also covers the reload cases, which are harder to write a test
  for (and I didn't try).  I've tested it with Toyo's case and it fixes that.

[toyoa@mvista.com: fix: min_t -> max_t]
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NRoland McGrath <roland@redhat.com>
Cc: Daniel Walker <dwalker@mvista.com>
Cc: Toyo Abe <toyoa@mvista.com>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Seongbae Park <spark@google.com>
Cc: Peter Mattis <pmattis@google.com>
Cc: Rohit Seth <rohitseth@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I have seen mdadm oops after successfully unloading md module.

This patch privents from unloading md module while
mdadm is polling /proc/mdstat.

Cc: Neil Brown <neilb@suse.de>
Signed-off-by: NAkinbou Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If remove_mapping() failed to remove the page from its mapping, don't go and
mark it not uptodate!  Makes kernel go dead.

(Actually, I don't think the ClearPageUptodate is needed there at all).

Says Nick Piggin:

   "Right, it isn't needed because at this point the page is guaranteed
    by remove_mapping to have no references (except us) and cannot pick
    up any new ones because it is removed from pagecache.

    We can delete it."
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is Eric Sesterhenn's jbd patch applied to jbd2.
Commit: 41716c7c

His words:

Since commit d1807793 we dereference a NULL
pointer.  Coverity id #1432.  We set journal to NULL, and use it directly
afterwards.
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Cc: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Avoid possible PIT livelock issues seen on SMP systems (and reported by
Andi), by not allowing it as a clocksource on SMP boxes.

However, since the PIT may no longer be present, we have to properly handle
the cases where SMP systems have TSC skew and fall back from the TSC.
Since the PIT isn't there, it would "fall back" to the TSC again.  So this
changes the jiffies rating to 1, and the TSC-bad rating value to 0.

Thus you will get the following behavior priority on i386 systems:

tsc		[if present & stable]
hpet		[if present]
cyclone		[if present]
acpi_pm		[if present]
pit		[if UP]
jiffies

Rather then the current more complicated:
tsc		[if present & stable]
hpet		[if present]
cyclone		[if present]
acpi_pm		[if present]
pit		[if cpus < 4]
tsc		[if present & unstable]
jiffies
Signed-off-by: NJohn Stultz <johnstul@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I will be taking over after Russell King as the new maintainer of the
MMC layer.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In general, lockdep warnings are intended to be non-fatal, so I have put in
various practical limits on internal data structure failure modes.  We haven't
had a /single/ lockdep-internal crash ever since lockdep went upstream [the
unwinder crashes are outside of lockdep], and that's largely due to the good
internal checks it does.

Recursion within the dependency graph is currently limited to 20, that's
probably not enough on some many-CPU boxes - this patch doubles it to 40.  I
have written the lockdep functions to have as small stackframes as possible,
so 40 should be OK too.  (The practical recursion limit should be somewhere
between 100 and 200 entries.  If we hit that then I'll change the algorithm to
be iteration-based.  Graph walking logic is so easy to program via recursion,
so i'd like to keep recursion as long as possible.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove reference to PAGE_SIZE that causes errors if PAGE_SIZE != 4096
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The SGI PCI-RT card, based on the SGI IOC4 chip, will be made available on
Altix XE (x86_64) platforms in the near future.  As such it is now a
misnomer for the IOC4 base device driver to live under drivers/sn, and
would complicate builds for non-SN2.

This patch moves the IOC4 base driver code from drivers/sn to drivers/misc,
and updates the associated Makefiles and Kconfig files to allow building on
non-SN2 configs.  Due to the resulting change in link order, it is now
necessary to use late_initcall() for IOC4 subdriver initialization.

[akpm@osdl.org: __udivdi3 fix]
[akpm@osdl.org: fix default in Kconfig]
Acked-by: NPat Gefre <pfg@sgi.com>
Acked-by: NJeremy Higdon <jeremy@sgi.com>
Signed-off-by: NBrent Casavant <bcasavan@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The SGI PCI-RT card, based on the SGI IOC4 chip, will be made available on
Altix XE (x86_64) platforms in the near future.  As such dependencies on
SN2-specific features and config dependencies need to be removed.

This patch updates the Kconfig files to remove the config dependency, and
updates the IOC4 bus speed detection routine to use universally available
time interfaces instead of mmtimer.
Signed-off-by: NBrent Casavant <bcasavan@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The telecom clock driver for MPBL0010 ATCA SBC depends on X86
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NMark Gross <mark.gross@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=7371

sys_epoll_pwait needs to be listed as a conditional (weak)
entry point for CONFIG_EPOLL=n.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits)
  [Bluetooth] Use work queue to trigger URB submission
  [Bluetooth] Add locking for bt_proto array manipulation
  [Bluetooth] Check if DLC is still attached to the TTY
  [Bluetooth] Fix reference count when connection lookup fails
  [Bluetooth] Disconnect HID interrupt channel first
  [Bluetooth] Support concurrent connect requests
  [Bluetooth] Make use of virtual devices tree
  [Bluetooth] Handle return values from driver core functions
  [Bluetooth] Fix compat ioctl for BNEP, CMTP and HIDP
  [IPV6] sit: Add missing MODULE_LICENSE
  [IPV6]: Remove bogus WARN_ON in Proxy-NA handling.
  [IPv6] rules: Use RT6_LOOKUP_F_HAS_SADDR and fix source based selectors
  [XFRM]: Fix xfrm_state_num going negative.
  [NET]: reduce sizeof(struct inet_peer), cleanup, change in peer_check_expire()
  NetLabel: the CIPSOv4 passthrough mapping does not pass categories correctly
  NetLabel: better error handling involving mls_export_cat()
  NetLabel: only deref the CIPSOv4 standard map fields when using standard mapping
  [BRIDGE]: flush forwarding table when device carrier off
  [NETFILTER]: ctnetlink: Remove debugging messages
  [NETFILTER]: Update MAINTAINERS entry
  ...

Use inc/dec_preempt_count() rather than preempt_enable/disable() and manually
add in the compiler barriers that were provided by the latter.  This makes FRV
consistent with other archs.

Furthermore, the compiler barrier effects are now there unconditionally - at
least as far as preemption is concerned - because we don't want the compiler
moving memory accesses out of the section of code in which the mapping is in
force - in effect the kmap_atomic() must imply a LOCK-class barrier and the
kunmap_atomic() must imply an UNLOCK-class barrier to the compiler.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It is known that 2 LSI Logic MegaRAID SATA RAID Controllers (150-4 and
150-6) don't support 64-bit DMA.  Unfortunately currently this check is
wrong and driver sets 64-bit DMA mode for these devices.
Signed-off-by: NAndrey Mirkin <amirkin@sw.ru>
Acked-by: NVasily Averin <vvs@sw.ru>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Without this the user can feed in bogus values and get very bogus
results. Security impact is minimal as this ioctl isn't available to
unpriviledged processes anyway.

Reported to the l/k list and found with an auditing tool.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Found by an analysis tool and reported to the list. Fix is simple enough
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The bcm203x firmware loading driver uses a timer to trigger the URB
submission. It is better to use a work queue instead.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The bt_proto array needs to be protected by some kind of locking to
prevent a race condition between bt_sock_create and bt_sock_register.

And in addition all calls to sk_alloc need to be made GFP_ATOMIC now.
Signed-off-by: NMasatake YAMATO <jet@gyve.org>
Signed-off-by: NFrederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

If the DLC device is no longer attached to the TTY device, then it
makes no sense to go through with changing the termios settings.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When the connection lookup for the device structure fails, the reference
count for the HCI device needs to be decremented.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The Bluetooth HID specification demands that the interrupt channel
shall be disconnected first. This is needed to pass the qualification
tests.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Most Bluetooth chips don't support concurrent connect requests, because
this would involve a multiple baseband page with only one radio. In the
case an upper layer like L2CAP requests a concurrent connect these chips
return the error "Command Disallowed" for the second request. If this
happens it the responsibility of the Bluetooth core to queue the request
and try again after the previous connect attempt has been completed.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The Bluetooth subsystem currently uses a platform device for devices
with no parent. It is a better idea to use the new virtual devices
tree for these.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Some return values of the driver core register and create functions
are not handled and so might cause unexpected problems.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

There exists no attempt do deal with the fact that a structure with
a uint32_t followed by a pointer is going to be different for 32-bit
and 64-bit userspace. Any 32-bit process trying to use it will be
failing with -EFAULT if it's lucky; suffering from having data dumped
at a random address if it's not.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This is missing the MODULE_LICENSE statements and taints the kernel
upon loading. License is obvious from the beginning of the file.
Signed-off-by: NJan Dittmer <jdi@l4x.org>
Signed-off-by: NJoerg Roedel <joro-lkml@zlug.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes rt6_lookup() to provide the source address in the flow
and sets RT6_LOOKUP_F_HAS_SADDR whenever it is present in
the flow.

Avoids unnecessary prefix comparisons by checking for a prefix
length first.

Fixes the rule logic to not match packets if a source selector
has been specified but no source address is available.

Thanks to Kim Nordlund <kim.nordlund@nokia.com> for working
on this patch with me.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NVille Nuorvala <vnuorval@tcs.hut.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Missing counter bump when hashing in a new ACQ
xfrm_state.

Now that we have two spots to do the hash grow
check, break it out into a helper function.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>