The filename length in dirent of may become zero-sized after random junk
data injection, once encounter such dirent, find_target_dentry or
f2fs_add_inline_entries will run into an infinite loop. So let f2fs being
aware of that to avoid deadloop.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

I've changed employer, update my email address to the new one.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Under direct IO path with O_(D)SYNC, it needs to set proper APPEND or UPDATE
flags, so taht f2fs_sync_file can make its data safe.
Acked-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

In order to give atomic writes, we should consider power failure during
sync_node_pages in fsync.
So, this patch marks fsync flag only in the last dnode block.
Acked-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

The fsync_node_pages should return pass or failure so that user could know
fsync is completed or not.
Acked-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch splits the existing sync_node_pages into (f)sync_node_pages.
The fsync_node_pages is used for f2fs_sync_file only.
Acked-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

The first page of volatile writes usually contains a sort of header information
which will be used for recovery.
(e.g., journal header of sqlite)

If this is written without other journal data, user needs to handle the stale
journal information.
Acked-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

When fsync is called, sync_node_pages finds a proper direct node pages to flush.
But, it locks unrelated direct node pages together unnecessarily.
Acked-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If somebody wrote some data before atomic writes, we should flush them in order
to handle atomic data in a right period.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If we committed atomic write successfully, we don't need to invalidate pages.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch returns -E2BIG if there is no space to add an xattr entry.
This should fix generic/026 in xfstests as well.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch resolves the redundant condition check reported by David.
Reported-by: NDavid Binderman <dcb314@hotmail.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

The atomic/volatile operation should be done in pair of start and commit
ioctl.
For example, if a killed process remains open-ended atomic operation, we should
drop its flag as well as its atomic data. Otherwise, if sqlite initiates another
operation which doesn't require atomic writes, it will lose every data, since
f2fs still treats with them as atomic writes; nobody will trigger its commit.
Reported-by: NMiao Xie <miaoxie@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

When one reader closes its file while the other writer is doing atomic writes,
f2fs_release_file drops atomic data resulting in an empty commit.
This patch fixes this wrong commit problem by checking openess of the file.

 Process0                       Process1
 				open file
 start atomic write
 write data
 read data
				close file
				f2fs_release_file()
				clear atomic data
 commit atomic write
Reported-by: NMiao Xie <miaoxie@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds BUG_ON instead of retrying loop.
In the case of node pages, we already got this inode page, but unlocked it.
By the fact that we don't truncate any node pages in operations, the page's
mapping should be unchangeable.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Previously, after trylock_page is succeeded, it doesn't check its mapping.
In order to fix that, we can just give PGP_LOCK to pagecache_get_page.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

With below serials, we will lose parts of dirents:

1) mount f2fs with inline_dentry option
2) echo 1 > /sys/fs/f2fs/sdX/dir_level
3) mkdir dir
4) touch 180 files named [1-180] in dir
5) touch 181 in dir
6) echo 3 > /proc/sys/vm/drop_caches
7) ll dir

ls: cannot access 2: No such file or directory
ls: cannot access 4: No such file or directory
ls: cannot access 5: No such file or directory
ls: cannot access 6: No such file or directory
ls: cannot access 8: No such file or directory
ls: cannot access 9: No such file or directory
...
total 360
drwxr-xr-x 2 root root 4096 Feb 19 15:12 ./
drwxr-xr-x 3 root root 4096 Feb 19 15:11 ../
-rw-r--r-- 1 root root    0 Feb 19 15:12 1
-rw-r--r-- 1 root root    0 Feb 19 15:12 10
-rw-r--r-- 1 root root    0 Feb 19 15:12 100
-????????? ? ?    ?       ?            ? 101
-????????? ? ?    ?       ?            ? 102
-????????? ? ?    ?       ?            ? 103
...

The reason is: when doing the inline dir conversion, we didn't consider
that directory has hierarchical hash structure which can be configured
through sysfs interface 'dir_level'.

By default, dir_level of directory inode is 0, it means we have one bucket
in hash table located in first level, all dirents will be hashed in this
bucket, so it has no problem for us to do the duplication simply between
inline dentry page and converted normal dentry page.

However, if we configured dir_level with the value N (greater than 0), it
will expand the bucket number of first level hash table by 2^N - 1, it
hashs dirents into different buckets according their hash value, if we
still move all dirents to first bucket, it makes incorrent locating for
inline dirents, the result is, although we can iterate all dirents through
->readdir, we can't stat some of them in ->lookup which based on hash
table searching.

This patch fixes this issue by rehashing dirents into correct position
when converting inline directory.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch remains the current mount status to f2fs status info.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

When user remounts f2fs as read-only, we can mark the checkpoint as umount.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Once detecting something to recover, f2fs should stop mounting, given norecovery
and rw mount options.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds a sbi flag, SBI_NEED_SB_WRITE, which indicates it needs to
recover superblock when (re)mounting as RW. This is set only when f2fs is
mounted as RO.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

When one of superblocks is missing, f2fs recovers it with the valid one.
But, even if f2fs is mounted as RO, we'd better notify that too.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Pull x86 fixes from Ingo Molnar:
 "Misc fixes: a binutils fix, an lguest fix, an mcelog fix and a missing
  documentation fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Avoid using object after free in genpool
  lguest, x86/entry/32: Fix handling of guest syscalls using interrupt gates
  x86/build: Build compressed x86 kernels as PIE
  x86/mm/pkeys: Add missing Documentation

Pull mm gup cleanup from Ingo Molnar:
 "This removes the ugly get-user-pages API hack, now that all upstream
  code has been migrated to it"

("ugly" is putting it mildly. But it worked.. - Linus)

* 'mm-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mm/gup: Remove the macro overload API migration helpers from the get_user*() APIs

Pull device mapper fixes from Mike Snitzer:

 - fix a 4.6-rc1 bio-based DM 'struct dm_target_io' leak in an error
   path

 - stable@ fix for DM cache metadata's READ_LOCK macros that were
   incorrectly returning error if the block manager was in read-only
   mode; also cleanup multi-statement macros to use do {} while(0)

* tag 'dm-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros
  dm: fix dm_target_io leak if clone_bio() returns an error

Merge tag 'pwm/for-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm fix from Thierry Reding:
 "A single one-line fix to turn the regmap cache from an RB-tree to a
  flat cache to avoid lockdep and abort issues"

* tag 'pwm/for-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: fsl-ftm: Use flat regmap cache

Pull sound fixes from Takashi Iwai:
 "We've had a very calm development cycle, so far.  Here are the few
  fixes for HD-audio and USB-audio, all of which are small and easy"

* tag 'sound-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix inconsistent monitor_present state until repoll
  ALSA: hda - Fix regression of monitor_present flag in eld proc file
  ALSA: usb-audio: Skip volume controls triggers hangup on Dell USB Dock
  ALSA: hda/realtek - Enable the ALC292 dock fixup on the Thinkpad T460s
  ALSA: sscape: Use correct format identifier for size_t
  ALSA: usb-audio: Add a quirk for Plantronics BT300
  ALSA: usb-audio: Add a sample rate quirk for Phoenix Audio TMX320
  ALSA: hda - Bind with i915 only when Intel graphics is present

Pull mailbox fixes from Jussi Brar:
 "Misc fixes:

  mailbox-test driver:
   - prevent memory leak and another cosmetic change

  mailbox:
   - change the returned error code

  Xgene driver:
   - return -ENOMEM instead of PTR_ERR for failed devm_kzalloc"

* 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: Stop using ENOSYS for anything other than unimplemented syscalls
  mailbox: mailbox-test: Prevent memory leak
  mailbox: mailbox-test: Use more consistent format for calling copy_from_user()
  mailbox: xgene-slimpro: Fix wrong test for devm_kzalloc

Pull f2fs/fscrypto fixes from Jaegeuk Kim:
 "In addition to f2fs/fscrypto fixes, I've added one patch which
  prevents RCU mode lookup in d_revalidate, as Al mentioned.

  These patches fix f2fs and fscrypto based on -rc3 bug fixes in ext4
  crypto, which have not yet been fully propagated as follows.

   - use of dget_parent and file_dentry to avoid crashes
   - disallow RCU-mode lookup in d_invalidate
   - disallow -ENOMEM in the core data encryption path"

* tag 'for-linus-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  ext4/fscrypto: avoid RCU lookup in d_revalidate
  fscrypto: don't let data integrity writebacks fail with ENOMEM
  f2fs: use dget_parent and file_dentry in f2fs_file_open
  fscrypto: use dget_parent() in fscrypt_d_revalidate()

Pull crypto fixes from Herbert Xu:
 "This fixes an NFS regression caused by the skcipher/hash conversion in
  sunrpc.  It also fixes a build problem in certain configurations with
  bcm63xx"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  hwrng: bcm63xx - fix device tree compilation
  sunrpc: Fix skcipher/shash conversion

Pull keys bugfixes from James Morris:
 "Two bugfixes for Keys related code"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  ASN.1: fix open failure check on headername
  assoc_array: don't call compare_object() on a node

The READ_LOCK macro was incorrectly returning -EINVAL if
dm_bm_is_read_only() was true -- it will always be true once the cache
metadata transitions to read-only by dm_cache_metadata_set_read_only().

Wrap READ_LOCK and WRITE_LOCK multi-statement macros in do {} while(0).
Also, all accesses of the 'cmd' argument passed to these related macros
are now encapsulated in parenthesis.

A follow-up patch can be developed to eliminate the use of macros in
favor of pure C code.  Avoiding that now given that this needs to apply
to stable@.
Reported-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Fixes: d14fcf3d ("dm cache: make sure every metadata function checks fail_io")
Cc: stable@vger.kernel.org

In commit c4004b02 ("x86: remove the kernel code/data/bss resources
from /proc/iomem") I was hoping to remove the phyiscal kernel address
data from /proc/iomem entirely, but that had to be reverted because some
system programs actually use it.

This limits all the detailed resource information to properly
credentialed users instead.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The PCI config access checked the file capabilities correctly, but used
the itnernal security capability check rather than the helper function
that is actually meant for that.

The security_capable() has unusual return values and is not meant to be
used elsewhere (the only other use is in the capability checking
functions that we actually intend people to use, and this odd PCI usage
really stood out when looking around the capability code.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A lot of seqfile users seem to be using things like %pK that uses the
credentials of the current process, but that is actually completely
wrong for filesystem interfaces.

The unix semantics for permission checking files is to check permissions
at _open_ time, not at read or write time, and that is not just a small
detail: passing off stdin/stdout/stderr to a suid application and making
the actual IO happen in privileged context is a classic exploit
technique.

So if we want to be able to look at permissions at read time, we need to
use the file open credentials, not the current ones.  Normal file
accesses can just use "f_cred" (or any of the helper functions that do
that, like file_ns_capable()), but the seqfile interfaces do not have
any such options.

It turns out that seq_file _does_ save away the user_ns information of
the file, though.  Since user_ns is just part of the full credential
information, replace that special case with saving off the cred pointer
instead, and suddenly seq_file has all the permission information it
needs.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit c4004b02.

Sadly, my hope that nobody would actually use the special kernel entries
in /proc/iomem were dashed by kexec.  Which reads /proc/iomem explicitly
to find the kernel base address.  Nasty.

Anyway, that means we can't do the sane and simple thing and just remove
the entries, and we'll instead have to mask them out based on permissions.
Reported-by: NZhengyu Zhang <zhezhang@redhat.com>
Reported-by: NDave Young <dyoung@redhat.com>
Reported-by: NFreeman Zhang <freeman.zhang1992@gmail.com>
Reported-by: NEmrah Demir <ed@abdsec.com>
Reported-by: NBaoquan He <bhe@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use flat regmap cache to avoid lockdep warning at probe:

[    0.697285] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2755 lockdep_trace_alloc+0x15c/0x160()
[    0.697449] DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))

The RB-tree regmap cache needs to allocate new space on first writes.
However, allocations in an atomic context (e.g. when a spinlock is held)
are not allowed. The function regmap_write calls map->lock, which
acquires a spinlock in the fast_io case. Since the pwm-fsl-ftm driver
uses MMIO, the regmap bus of type regmap_mmio is being used which has
fast_io set to true.

The MMIO space of the pwm-fsl-ftm driver is reasonable condense, hence
using the much faster flat regmap cache is anyway the better choice.
Signed-off-by: NStefan Agner <stefan@agner.ch>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: NThierry Reding <thierry.reding@gmail.com>

Pull arch/sh fixes from Rich Felker:
 "Fixes for two arch/sh build regressions that appeared in 4.6-rc1, one
  introduced by me, and one caused by changes elsewhere"

* tag 'sh-fixes-4.6-rc1' of git://git.libc.org/linux-sh:
  sh: fix function signature of cpu_coregroup_mask to match pointer type
  sh: fix smp-shx3 build regression from removal of arch localtimer

Pull m68knommu/coldfire fix from Greg Ungerer:
 "Only a single change that removes a local arch specific gpio bus sysfs
  device that now clashes with the generic gpio bus sysfs device
  interface"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k/gpio: remove arch specific sysfs bus device

Pull ARM SoC fixes from Olof Johansson:
 "A batch of fixes for -rc4, for various platforms.

  Nothing really substantial and worth pointing out in particular; small
  fixes for various bugs, see shortlog for details"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: sa1100: remove references to the defunct handhelds.org
  bus: uniphier-system-bus: fix condition of overlap check
  ARM: uniphier: drop weird sizeof()
  ARM: dts: am335x-baltos-ir5221: fix cpsw_emac0 link type
  ARM: OMAP: Correct interrupt type for ARM TWD
  ARM: DRA722: Add ID detect for Silicon Rev 2.0
  ARM: dts: am43xx: fix edma memcpy channel allocation
  ARM: dts: AM43x-epos: Fix clk parent for synctimer
  ARM: OMAP2: Fix up interconnect barrier initialization for DRA7
  documentation: Fix pinctrl documentation for Meson8 / Meson8b
  ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b
  ARM: mvebu: Correct unit address for linksys
  bus: mvebu-mbus: use %pa to print phys_addr_t
  arm64: dts: vulcan: Update PCI ranges
  ARM: u8500_defconfig: turn on the Synaptics RMI4 driver
  ARM: pxa: fix the number of DMA requestor lines
  ARM: OMAP2+: hwmod: Fix updating of sysconfig register
  ARM: OMAP2+: Use srst_udelay for USB on dm814x