- 01 10月, 2016 1 次提交
-
-
由 Jaegeuk Kim 提交于
Previously, we used cp_version only to detect recoverable dnodes. In order to avoid same garbage cp_version, we needed to truncate the next dnode during checkpoint, resulting in additional discard or data write. If we can distinguish this by using crc in addition to cp_version, we can remove this overhead. There is backward compatibility concern where it changes node_footer layout. So, this patch introduces a new checkpoint flag, CP_CRC_RECOVERY_FLAG, to detect new layout. New layout will be activated only when this flag is set. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 14 9月, 2016 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch gives another chances during roll-forward recovery regarding to -ENOMEM. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 13 9月, 2016 1 次提交
-
-
由 Jaegeuk Kim 提交于
There is no functional change. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 08 9月, 2016 2 次提交
-
-
由 Shuoran Liu 提交于
Add roll-forward recovery process for encrypted dentry, so the first fsync issued to an encrypted file does not need writing checkpoint. This improves the performance of the following test at thousands of small files: open -> write -> fsync -> close Signed-off-by: NShuoran Liu <liushuoran@huawei.com> Acked-by: NChao Yu <yuchao0@huawei.com> [Jaegeuk Kim: modify kernel message to show encrypted names] Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
Like most filesystems, f2fs will issue discard command synchronously, so when user trigger fstrim through ioctl, multiple discard commands will be issued serially with sync mode, which makes poor performance. In this patch we try to support async discard, so that all discard commands can be issued and be waited for endio in batch to improve performance. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 21 7月, 2016 2 次提交
-
-
由 Jaegeuk Kim 提交于
It's enough to show BUG or WARN by f2fs_bug_on for error case. Then, we don't need to remain corrupted filesystem. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
This patch fixes to report the right error number of f2fs_find_entry to its caller. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 14 6月, 2016 1 次提交
-
-
由 Jaegeuk Kim 提交于
This mount option is to enable original log-structured filesystem forcefully. So, there should be no random writes for main area. Especially, this supports host-managed SMR device. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 03 6月, 2016 3 次提交
-
-
由 Jaegeuk Kim 提交于
If roll-forward recovery can recover i_size, we don't need to update inode's metadata during fsync. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch reduces to call them across the whole tree. - sync_inode_page() - update_inode_page() - update_inode() - f2fs_write_inode() Instead, checkpoint will flush all the dirty inode metadata before syncing node pages. Note that, this is doable, since we call mark_inode_dirty_sync() for all inode's field change which needs to update on-disk inode as well. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch introduces f2fs_i_size_write() to call mark_inode_dirty_sync() with i_size_write(). Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 21 5月, 2016 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch avoids impossible error injection, ENOSPC, during recovery process. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 19 5月, 2016 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch uses percpu_count for sbi->alloc_valid_block_count. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 12 5月, 2016 1 次提交
-
-
由 Jaegeuk Kim 提交于
We don't need to use f2fs_bug_on() to treat with any error case when allocating a block during recovery. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 08 5月, 2016 2 次提交
-
-
由 Chao Yu 提交于
When testing f2fs with inline_dentry option, generic/342 reports: VFS: Busy inodes after unmount of dm-0. Self-destruct in 5 seconds. Have a nice day... After rmmod f2fs module, kenrel shows following dmesg: ============================================================================= BUG f2fs_inode_cache (Tainted: G O ): Objects remaining in f2fs_inode_cache on __kmem_cache_shutdown() ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xf51ca0e0 objects=22 used=1 fp=0xd1e6fc60 flags=0x40004080 CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000086 00000086 d062fe18 c13a83a0 f51ca0e0 d062fe38 d062fea4 c11c7276 c1981040 f51ca0e0 00000016 00000001 d1e6fc60 40004080 656a624f 20737463 616d6572 6e696e69 6e692067 66326620 6e695f73 5f65646f 68636163 6e6f2065 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c11c7276>] slab_err+0x76/0x80 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfe5>] __kmem_cache_shutdown+0x125/0x2f0 [<c1198a38>] kmem_cache_destroy+0x158/0x1f0 [<c176b43d>] ? mutex_unlock+0xd/0x10 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 INFO: Object 0xd1e6d9e0 @offset=6624 kmem_cache_destroy f2fs_inode_cache: Slab cache still has objects CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000286 00000286 d062fef4 c13a83a0 f174b000 d062ff14 d062ff28 c1198ac7 c197fe18 f3c5b980 d062ff20 000d04f2 d062ff0c d062ff0c d062ff14 d062ff14 f8f20dc0 fffffff5 d062e000 d062ff30 f8f15aa3 d062ff7c c10f596c 73663266 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c1198ac7>] kmem_cache_destroy+0x1e7/0x1f0 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 The reason is: in recovery flow, we use delayed iput mechanism for directory which has recovered dentry block. It means the reference of inode will be held until last dirty dentry page being writebacked. But when we mount f2fs with inline_dentry option, during recovery, dirent may only be recovered into dir inode page rather than dentry page, so there are no chance for us to release inode reference in ->writepage when writebacking last dentry page. We can call paired iget/iput explicityly for inline_dentry case, but for non-inline_dentry case, iput will call writeback_single_inode to write all data pages synchronously, but during recovery, ->writepages of f2fs skips writing all pages, result in losing dirent. This patch fixes this issue by obsoleting old mechanism, and introduce a new dir_list to hold all directory inodes which has recovered datas until finishing recovery. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
In find_fsync_dnodes, get_tmp_page will read dnode page synchronously, previously, ra_meta_page did the same work, which is redundant, remove it. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 04 5月, 2016 1 次提交
-
-
由 Chao Yu 提交于
Factor out fsync inode entry operations into {add,del}_fsync_inode. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 27 4月, 2016 1 次提交
-
-
由 Jaegeuk Kim 提交于
In order to give atomic writes, we should consider power failure during sync_node_pages in fsync. So, this patch marks fsync flag only in the last dnode block. Acked-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 15 4月, 2016 1 次提交
-
-
由 Jaegeuk Kim 提交于
Once detecting something to recover, f2fs should stop mounting, given norecovery and rw mount options. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 05 4月, 2016 1 次提交
-
-
由 Kirill A. Shutemov 提交于
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 2月, 2016 3 次提交
-
-
由 Chao Yu 提交于
f2fs support atomic write with following semantics: 1. open db file 2. ioctl start atomic write 3. (write db file) * n 4. ioctl commit atomic write 5. close db file With this flow we can avoid file becoming corrupted when abnormal power cut, because we hold data of transaction in referenced pages linked in inmem_pages list of inode, but without setting them dirty, so these data won't be persisted unless we commit them in step 4. But we should still hold journal db file in memory by using volatile write, because our semantics of 'atomic write support' is incomplete, in step 4, we could fail to submit all dirty data of transaction, once partial dirty data was committed in storage, then after a checkpoint & abnormal power-cut, db file will be corrupted forever. So this patch tries to improve atomic write flow by adding a revoking flow, once inner error occurs in committing, this gives another chance to try to revoke these partial submitted data of current transaction, it makes committing operation more like aotmical one. If we're not lucky, once revoking operation was failed, EAGAIN will be reported to user for suggesting doing the recovery with held journal file, or retrying current transaction again. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
There are redundant pointer conversion in following call stack: - at position a, inode was been converted to f2fs_file_info. - at position b, f2fs_file_info was been converted to inode again. - truncate_blocks(inode,..) - fi = F2FS_I(inode) ---a - ADDRS_PER_PAGE(node_page, fi) - addrs_per_inode(fi) - inode = &fi->vfs_inode ---b - f2fs_has_inline_xattr(inode) - fi = F2FS_I(inode) - is_inode_flag_set(fi,..) In order to avoid unneeded conversion, alter ADDRS_PER_PAGE and addrs_per_inode to acept parameter with type of inode pointer. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
In write_begin, if storage supports stable_page, we don't need to wait for writeback to update its contents. This patch introduces to use wait_for_stable_page instead of wait_on_page_writeback. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 31 12月, 2015 1 次提交
-
-
由 Chao Yu 提交于
do_checkpoint and write_checkpoint can fail due to reasons like triggering in a readonly fs or encountering IO error of storage device. So it's better to report such error info to user, let user be aware of failure of doing checkpoint. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 05 12月, 2015 2 次提交
-
-
由 Chao Yu 提交于
In recover_data, value of argument 'type' will be CURSEG_WARM_NODE all the time, remove it for cleanup. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
If device does not support discard, some obsolete dnodes can be recovered by roll-forward. This patch enhances the recovery flow. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 13 10月, 2015 2 次提交
-
-
由 Chao Yu 提交于
Now, we use ra_meta_pages to reads continuous physical blocks as much as possible to improve performance of following reads. However, ra_meta_pages uses a synchronous readahead approach by submitting bio with READ, as READ is with high priority, it can not be used in the case of preloading blocks, and it's not sure when these RAed pages will be used. This patch supports asynchronous readahead in ra_meta_pages by tagging bio with READA flag in order to allow preloading. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
In recovery or checkpoint flow, we grab pages temperarily in meta inode's mapping for caching temperary data, actually, datas in these pages were not meta data of f2fs, but still we tag them with REQ_META flag. However, lower device like eMMC may do some optimization for data of such type. So in order to avoid wrong optimization, we'd better remove such flag for temperary non-meta pages. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 10 10月, 2015 2 次提交
-
-
由 Chao Yu 提交于
Protecting recovery flow by using cp_rwsem is not needed, since we have prevent triggering any checkpoint by locking cp_mutex previously. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
We have potential overflow issue when calculating size of object, when we left shift index with PAGE_CACHE_SHIFT bits, if type of index has only 32-bits space in 32-bit architecture, left shifting will incur overflow, i.e: pgoff_t index = 0xFFFFFFFF; loff_t size = index << PAGE_CACHE_SHIFT; size: 0xFFFFF000 So we should cast index with 64-bits type to avoid this issue. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 20 8月, 2015 1 次提交
-
-
由 Jaegeuk Kim 提交于
We should not write node pages when deleting orphan inodes. In order to do that, we can eaisly set POR_DOING flag earlier before entering orphan inode routine. Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 06 8月, 2015 1 次提交
-
-
由 Chao Yu 提交于
When testing with generic/101 in xfstests, error message outputed as below: --- tests/generic/101.out +++ results//generic/101.out.bad @@ -10,10 +10,14 @@ File foo content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * -0200000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +0200000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb * 0372000 ... (Run 'diff -u tests/generic/101.out results/generic/101.out.bad' to see the entire diff) The test flow is like below: 1. pwrite foo -S 0xaa 0 64K 2. pwrite foo -S 0xbb 64K 61K 3. sync 4. truncate foo 64K 5. truncate foo 125K 6. fsync foo 7. flakey drop writes 8. umount After this test, we expect the data of recovered file will have the first 64k of data filling with value 0xaa and the next 61k of data filling with value 0x00 because we have fsynced it before dropping writes in dm. In f2fs, during recovering, we will only recover the valid block address in direct node page if it is marked as a fsynced dnode, but block address which means invalid/reserved (with value NULL_ADDR/NEW_ADDR) will not be recovered. So, the file recovered shows its incorrect data 0xbb in range of [61k, 125k]. In this patch, we fix to recover invalid/reserved block during recover flow. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 05 8月, 2015 1 次提交
-
-
由 Chao Yu 提交于
To avoid meeting garbage data in next free node block at the end of warm node chain when doing recovery, we will try to zero out that invalid block. If the device is not support discard, our way for zeroing out block is: grabbing a temporary zeroed page in meta inode, then, issue write request with this page. But, we forget to release that temporary page, so our memory usage will increase without gaining any hit ratio benefit, so it's better to free it for saving memory. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 03 6月, 2015 1 次提交
-
-
由 Chao Yu 提交于
This patch clean up codes through: 1.rename f2fs_replace_block to __f2fs_replace_block(). 2.introduce new f2fs_replace_block() to include __f2fs_replace_block() and some common related codes around __f2fs_replace_block(). Then, newly introduced function f2fs_replace_block can be used by following patch. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 29 5月, 2015 2 次提交
-
-
由 Jaegeuk Kim 提交于
This patch adds a bit flag to indicate whether or not i_name in the inode is encrypted. If this name is encrypted, we can't do recover_dentry during roll-forward. So, f2fs_sync_file() needs to do checkpoint, if this will be needed in future. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
Introduce a generic function replace_block base on recover_data_page, and export it. So with it we can operate file's meta data which is in CP/SSA area when we invoke fallocate with FALLOC_FL_COLLAPSE_RANGE flag. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 08 5月, 2015 1 次提交
-
-
由 Chao Yu 提交于
Export is_valid_blkaddr() and use it to replace some codes for readability. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 17 4月, 2015 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch adds CP_RECOVERY to remain recovery information for checkpoint. And, it makes sure writing checkpoint in this case. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 11 4月, 2015 2 次提交
-
-
由 Jaegeuk Kim 提交于
During the roll-forward recovery, if we found a new data index written fsync lastly, we need to recover new block address. But, if that address was corrupted, we should not recover that. Otherwise, f2fs gets kernel panic from: In check_index_in_prev_nodes(), sentry = get_seg_entry(sbi, segno); --------------------------> out-of-range segno. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
If there are multiple fsynced dnodes having a dent flag, roll-forward routine sets FI_INC_LINK for their inode, and recovery_dentry increases its link count accordingly. That results in normal file having a link count as 2, so we can't unlink those files. This was added to handle several inode blocks having same inode number with different directory paths. But, current f2fs doesn't replay all of path changes and only recover its dentry for the last fsynced inode block. So, there is no reason to do this. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-