The drm driver .load() operation is prone to race conditions as it
initializes the driver after registering the device nodes. Its usage is
deprecated, inline it in the probe function and call drm_dev_alloc() and
drm_dev_register() explicitly.

For consistency inline the .unload() handler in the remove function as
well.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Acked-by: NInki Dae <inki.dae@samsung.com>

The vblank hooks in struct drm_driver are deprecated and only meant for
legacy drivers.  For modern drivers with DRIVER_MODESET flag, the hooks
in struct drm_crtc_funcs should be used instead.

As the result, exynos_drm_crtc_enable[disable]_vblank() become static
functions.  They are moved around a bit to save forward declaration
though.  Also while at it, we move one step further to kill
exynos_drm_crtc_from_pipe() completely by updating hdmi_bind() a bit.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Cc: Inki Dae <inki.dae@samsung.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-9-git-send-email-shawnguo@kernel.org

On TM2/TM2e platforms HDMI output is connected to MHL bridge
SiI8620. To allow configure UltraHD modes on the bridge
and to eliminate unsupported modes this bridge should be
attached to drm_encoder implemented in exynos_hdmi.

Changelog v1:
- fix drm_attach_bridge argument.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Current settings for 27MHz and 27.027MHz do not work. Use the settings from
vendor code instead.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

VSI infoframe registers address space is non-contiguous, so infoframe write
should be split into two chunks.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

297MHz is used by Ultra HD modes.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Use core helpers to generate infoframes and generate vendor frame if necessary.

Changelog:
- changed 'ret >= 0' checks to '!ret'
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Free memory mapping, if hdmi_probe is not successful.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The helper, devm_regulator_bulk_get() initializes the consumer as NULL,
so this code can be ignored.
Signed-off-by: NMilo Kim <woogyom.kim@gmail.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Paring DT properties and getting PHY IO (memory mapped or I2C) in one
function.
Signed-off-by: NMilo Kim <woogyom.kim@gmail.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Paring DT properties and getting the I2C adapter in one function.
Signed-off-by: NMilo Kim <woogyom.kim@gmail.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.

Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NPeter Chen <peter.chen@nxp.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>

We have 1:1 relationship between connectors and encoders and the driver
is relying on the atomic helpers: we can drop the custom ->best_encoder()
implementations and let the core call drm_atomic_helper_best_encoder()
for us.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-5-git-send-email-boris.brezillon@free-electrons.com

Smatch warns that the if statement isn't indented.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160512195457.GA19095@mwanda

The regulators may not be available just because their driver's probe
function was just not executed and so the regulators not registered.

So, in this case the Exynos HDMI driver should not print logs since
a -EPROBE_DEFER is not really an error and that will just pollute
the kernel log and confuse users.

This patch prevents the following misleading messages to be printed:

[    1.443638] [drm:hdmi_probe] *ERROR* failed to get regulators
[    1.449326] [drm:hdmi_probe] *ERROR* hdmi_resources_init failed
Reported-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

HDMI-PHY clock should be accessible from other components in the pipeline.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Simplify code by replacing custom code by generic helper.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

HDMI registry dump unnecessary spoils console and is not very helpful.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

To ensure HDMI-PHY reprogramming will not affect
HDMI the latter should be reset.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

HDMI-PHY power off bit defaults to 0 in older HDMI versions.
In case of Exynos5433 it defaults to 1. To make code
consistent across all versions this bit is always unset/set in
power on/off sequences.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Proper PHY configuration should be as follow:
1. set HDMI clock parents to OSCCLK.
2. reconfigure PHY.
3. set HDMI clock parents to PHY.
4. wait for PLL stabilization.

The patch fixes it and consolidates the code.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

HDMI on Exynos5433 differs from previous versions:
- different HDMI-PHY settings,
- different clocks,
- SYSREG registers for enabling reference clock,
- MODE_SET register in HDMI-PHY.
It is distinguished from other variants by different compatible string.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

There is no point in rewriting default values, as the IP is reset anyway.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The patch performs following clean-ups:
- remove unnecessary white spaces,
- remove obvious comments,
- fix tabulations,
- remove NULL initializators,
- re-order driver data.

The patch does not change driver's behavior.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

HDMI-PHY configurations are stored as array pointer and count pair,
we can re-use existing helpers to simplify their initialization.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

These variables should not be modified.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

With incoming support for newer SoCs different set of clocks will be required,
depending on IP version. The patch prepares the driver for it.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The variable is unused for long time.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Moves a bunch of junk to .rodata from .data.

 drivers/gpu/drm/exynos/exynosdrm.ko:
-.text                       125792
+.text                       125788
-.rodata                      10972
+.rodata                      11748
-.data                         6720
+.data                         5944
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-19-git-send-email-boris.brezillon@free-electrons.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Let pm_runtime handle the enabling/disabling of the device with proper
refcnt instead of rely on specific flags to track the enabled state.

Changelog v3:
- revive powered flag to keep current dpms mode

Changelog v2:
- Mofidy CONFIG_PM_SLEEP -> CONFIG_PM
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Done with coccinelle for the most part. However, it thinks '...' is
part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder
in its place and got rid of it with sed afterwards.

@@
identifier dev, encoder, funcs;
@@
 int drm_encoder_init(struct drm_device *dev,
                      struct drm_encoder *encoder,
                      const struct drm_encoder_funcs *funcs,
                      int encoder_type
+                     ,const char *name, int DOTDOTDOT
                      )
{ ... }

@@
identifier dev, encoder, funcs;
@@
 int drm_encoder_init(struct drm_device *dev,
                      struct drm_encoder *encoder,
                      const struct drm_encoder_funcs *funcs,
                      int encoder_type
+                     ,const char *name, int DOTDOTDOT
                      );

@@
expression E1, E2, E3, E4;
@@
 drm_encoder_init(E1, E2, E3, E4
+                 ,NULL
                  )

v2: Add ', or NULL...' to @name kernel doc (Jani)
    Annotate the function with __printf() attribute (Jani)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449670818-2966-1-git-send-email-ville.syrjala@linux.intel.com

HDMI driver called directly function from MIXER driver to invalidate modes
not supported by MIXER. The patch replaces the hack with proper .atomic_check
callback.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The patch removes unused hdmi_context field.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Simple formula can be used to calculate CTS and N coefficients.
Additionaly ACR registers have different offsets for different versions
of IP.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Inline function is safer than macro, also the name has been changed to
be consistent with other inline function encoder_to_hdmi.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

hdmi_resources structure was filled by old platform data code and is not
necessary anymore. The patch removes it at groups together resource related
fields in hdmi_context.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The patch converts API to gpiod and moves initialization code
to hdmi_resources_init.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Driver tries to disable sclk_hdmi during re-parenting, to avoid possible
glitches. It is ineffective as the clock is used also by other devices (mixer).
Anyway driver works without disabling sclk_hdmi.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Driver always uses the same number of regulators, so there is no point in
dynamic allocation.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

hdmi-en is an optional regulator so it should be better handled by
devm_regulator_get_optional call.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>