- 10 2月, 2015 3 次提交
-
-
由 Yishai Hadas 提交于
The driver exposes interfaces that directly relate to HW state. Upon fatal error, consumers of these interfaces (ULPs) that rely on completion of all their posted work-request could hang, thereby introducing dependencies in shutdown order. To prevent this from happening, we manage the relevant resources (CQs, QPs) that are used by the device. Upon a fatal error, we now generate simulated completions for outstanding WQEs that were not completed at the time the HW was reset. It includes invoking the completion event handler for all involved CQs so that the ULPs will poll those CQs. When polled we return simulated CQEs with IB_WC_WR_FLUSH_ERR return code enabling ULPs to clean up their resources and not wait forever for completions upon receiving remove_one. The above change requires an extra check in the data path to make sure that when device is in error state, the simulated CQEs will be returned and no further WQEs will be posted. Signed-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Moni Shoua 提交于
When attaching a QP to a multicast address in bonded mode, there was an assumption that the port of the QP must be #1. This assumption isn't the case under the flow which enables maximal usage of the physical ports. Fix it by always checking the port of the original flow and create the mirrored flow on the other port. Fixes: c6215745 ('IB/mlx4: Load balance ports in port aggregation mode') Signed-off-by: NMoni Shoua <monis@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Moni Shoua 提交于
When queuing work to send the NETDEV_BONDING_INFO netdev event, it's possible that when the work is executed, the pointer to the slave becomes invalid. This can happen if between queuing the event and the execution of the work, the net-device was un-ensvaled and re-enslaved. Fix that by queuing a work with the data of the slave instead of the slave structure. Fixes: 69e61133 ('net/bonding: Notify state change on slaves') Reported-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NMoni Shoua <monis@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 2月, 2015 3 次提交
-
-
由 Hariprasad Shenai 提交于
Handle clip_tbl debugfs entry, when clip_tbl isn't allocated. In commit b5a02f50 ("cxgb4: Update ipv6 address handling api") wrong argument was passed for single_open for clip_tbl debugfs entry, which led to below trace. Fixing it. ====== call Trace: [<ffffffffa073c606>] clip_tbl_open+0x16/0x30 [cxgb4] [<ffffffff8119e2fa>] do_dentry_open+0x21a/0x370 [<ffffffff8119e499>] vfs_open+0x49/0x50 [<ffffffff811b0d0e>] do_last+0x21e/0x800 [<ffffffff811b1382>] path_openat+0x92/0x470 [<ffffffff8110569f>] ? rb_reserve_next_event+0xaf/0x380 [<ffffffff8110569f>] ? rb_reserve_next_event+0xaf/0x380 [<ffffffff811b189a>] do_filp_open+0x4a/0xa0 [<ffffffff811bdc5d>] ? __alloc_fd+0xcd/0x140 [<ffffffff8119fa4a>] do_sys_open+0x11a/0x230 [<ffffffff8101219f>] ? syscall_trace_enter_phase2+0xaf/0x1b0 [<ffffffff8119fb9e>] SyS_open+0x1e/0x20 [<ffffffff815bf6f0>] tracesys_phase2+0xd4/0xd9 Code: 89 e5 66 66 66 66 90 48 8b 47 e0 48 8b 40 30 48 8b 40 58 c9 c3 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 66 66 66 66 90 48 8b 47 e0 <48> 8b 40 58 c9 c3 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 RIP [<ffffffff8120898d>] PDE_DATA+0xd/0x20 RSP <ffff8800b08c3c48> CR2: 0000000000000058 ===== Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shrikrishna Khare 提交于
The hex constant chosen for VMXNET3_REV1_MAGIC is offensive, replace it with its decimal equivalent. Signed-off-by: NShrikrishna Khare <skhare@vmware.com> Reviewed-by: NShreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Receive Flow Steering is a nice solution but suffers from hash collisions when a mix of connected and unconnected traffic is received on the host, when flow hash table is populated. Also, clearing flow in inet_release() makes RFS not very good for short lived flows, as many packets can follow close(). (FIN , ACK packets, ...) This patch extends the information stored into global hash table to not only include cpu number, but upper part of the hash value. I use a 32bit value, and dynamically split it in two parts. For host with less than 64 possible cpus, this gives 6 bits for the cpu number, and 26 (32-6) bits for the upper part of the hash. Since hash bucket selection use low order bits of the hash, we have a full hash match, if /proc/sys/net/core/rps_sock_flow_entries is big enough. If the hash found in flow table does not match, we fallback to RPS (if it is enabled for the rxqueue). This means that a packet for an non connected flow can avoid the IPI through a unrelated/victim CPU. This also means we no longer have to clear the table at socket close time, and this helps short lived flows performance. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 2月, 2015 23 次提交
-
-
由 Hariprasad Shenai 提交于
Dump Transport Processor modules congestion control configuration Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Adds support to dump the current contents of mailbox and the driver which owns it. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Dump Upper Layer Protocol RX module command trace Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Dump Transport Processor event trace. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Dump out various chip sensor information. Currently Chip Temperature and Core Voltage. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
The 32-bit fields of a tx-wrb are little endian. The driver is currently using be_dws_le_to_cpu() routine to swap (cpu to le) all the fields of a tx-wrb. So, the rsvd field is also unnecessarily swapped. This patch fixes this by individually swapping the required fields. Also, the type of the fields in eth_tx_wrb{} is now changed to __le32 from u32 to avoid sparse warnings. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasundhara Volam 提交于
This patch adds support for processing the port misconfigure async event generated by the FW. This event is generated typically when an optical module is incorrectly installed or is faulty. This patch also moves the port_name field to the adapter struct for logging the event. As the be_cmd_query_port_name() call is now moved to be_get_config(), it is modified to use the mailbox instead of MCCQ Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
This patch re-factors the filter setting (uc-list, mc-list, promisc, vlan) code in be_set_rx_mode() and be_vid_config() to make it more readable and reduce code duplication. This patch adds a separate field to track the state/mode of filtering, along with moving all the filtering related fields to one place in be be_adapter structure. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
This patch passes BE_IF_FLAGS_XXX flags to be_cmd_rx_filter() routine instead of the IFF_XXX flags. Doing this gets rid of the code to convert the IFF_XXX flags to the BE_IF_FLAGS_XXX used by the FW cmd. The patch also removes code for setting if_flags_mask that was duplicated for each filter mode. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NKalesh AP <kalesh.purayil@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasundhara Volam 提交于
While sending FW update cmds to the FW, the driver specifies the "type" of each component that needs to be flashed. The FW then picks the offset in the flash area at which the componnet is to be flashed. This doesn't work when new components that the current FW doesn't recognize, need to be flashed. Recent FWs (10.2 and above) support a scheme of FW-update wherein the "offset" of the component in the flash area can be specified instead of the "type". This patch uses the "offset" based FW-update mechanism and only when it fails, it fallsback to the old "type" based update. Signed-off-by: NVasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasundhara Volam 提交于
Skyhawk-B0 FW UFI is not compatible to flash on Skyhawk-P2 ASIC. But, Skyhawk-P2 FW UFI is compatible with both B0 and P2 chips. Signed-off-by: NVasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasundhara Volam 提交于
This patch re-factors the code that checks for flash file compatibility with the chip type, for better readability, as follows: - be_get_ufi_type() returns the UFI type from the flash file - be_check_ufi_compatibility() checks if the UFI type is compatible with the adapter/chip that is being flashed Signed-off-by: NVasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasundhara Volam 提交于
BIT(x) is the preffered usage. Signed-off-by: NVasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
Routines that are called only inside one src file must remain in that file itself. Including them in a header file that is used for exporting routine/struct definitions, causes unnecessary compilation of other src files, when such a routine is modified. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Use BIT macro to replace (1 << bits). Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
vlan_get_protocol() has been defined and use it to replace get_protocol(). Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Keep NETIF_F_HW_VLAN_CTAG_RX and NETIF_F_HW_VLAN_CTAG_TX at the same line. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
It is unnecessary to accress the hw register if the device is unplugged. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Replace (tp->speed & LINK_STATUS) with netif_carrier_ok(). Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Set LPM timer to 500us, except for RTL_VER_04 which doesn't link at USB 3.0. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
If a error occurs when submitting rx, skip the remaining submissions and try to submit them again next time. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Implement the power on/off recommended procedure for the Single GPHY we have on our Starfighter 2 switch. In order to make sure we get proper LED link/activity signaling during suspend, switch the link indication from the Switch/MAC to the PHY. Finally, since the GPHY needs to be reset to be put in low power mode, we will loose any context applied to it: workarounds, EEE etc.. so we need to call phy_init_hw() to get our fixups re-applied successfully. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Move the code that touches the single GPHY register from bcm_sf2_sw_resume() to a separate function since we will have to enable/disable the GPHY from different locations, and we want the code to be self-contained. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 2月, 2015 11 次提交
-
-
由 Markus Elfring 提交于
The functions brcmu_pkt_buf_free_skb() and usb_free_urb() test whether their argument is NULL and then return immediately. Thus the test around the call is not needed. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Markus Elfring 提交于
The kfree() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Markus Elfring 提交于
The kfree() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Markus Elfring 提交于
The relay_close() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Markus Elfring 提交于
The functions kfree() and release_firmware() were called in a few cases by the cw1200_load_firmware_cw1200() function during error handling even if the passed variables contained still a null pointer. Corresponding implementation details could be improved by adjustments for jump targets. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Markus Elfring 提交于
The release_firmware() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Nicholas Mc Guire 提交于
This is only an API consolidation and should make things more readable it replaces var * HZ / 1000 by msecs_to_jiffies(var). Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Nicholas Mc Guire 提交于
This is only an API consolidation and should make things more readable it replaces var * HZ / 1000 by msecs_to_jiffies(var). Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Nicholas Mc Guire 提交于
This is only an API consolidation and should make things more readable it replaces var * HZ / 1000 by msecs_to_jiffies(var). Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Nicholas Mc Guire 提交于
This is only an API consolidation to make things more readable. Instances of HZ / CONST are replaced by appropriate msecs_to_jiffies(). Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Sergey Ryazanov 提交于
Sometimes while CPU have some load and ath5k doing the wireless interface reset the whole WiSoC completely freezes. Set of tests shows that using atomic delay function while we wait interface reset helps to avoid such freezes. The easiest way to reproduce this issue: create a station interface, start continous scan with wpa_supplicant and load CPU by something. Or just create multiple station interfaces and put them all in continous scan. This patch partially reverts the commit 1846ac3d ("ath5k: Use usleep_range where possible"), which replaces initial udelay() by usleep_range(). I do not know actual source of this issue, but all looks like that HW freeze is caused by transaction on internal SoC bus, while wireless block is in reset state. Also I should note that I do not know how many chips are affected, but I did not see this issue with chips, other than AR5312. CC: Jiri Slaby <jirislaby@gmail.com> CC: Nick Kossifidis <mickflemm@gmail.com> CC: Luis R. Rodriguez <mcgrof@do-not-panic.com> Fixes: 1846ac3d ("ath5k: Use usleep_range where possible") Reported-by: NChristophe Prevotaux <c.prevotaux@rural-networks.com> Tested-by: NChristophe Prevotaux <c.prevotaux@rural-networks.com> Tested-by: NEric Bree <ebree@nltinc.com> Signed-off-by: NSergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-