Both ceph_update_writeable_page and ceph_setattr will verify file size
with max size ceph supported.
There are two caller for ceph_update_writeable_page, ceph_write_begin and
ceph_page_mkwrite. For ceph_write_begin, we have already verified the size in
generic_write_checks of ceph_write_iter; for ceph_page_mkwrite, we have no
chance to change file size when mmap. Likewise we have already verified the size
in inode_change_ok when we call ceph_setattr.
So let's remove the redundant code for max file size verification.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Reviewed-by: NYan, Zheng <zyan@redhat.com>

ceph_sync_read and generic_file_read_iter() have already advanced the
IO iterator.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

ceph_find_inode() may wait on freeing inode, using it inside the s_mutex
may cause deadlock. (the freeing inode is waiting for OSD read reply, but
dispatch thread is blocked by the s_mutex)
Signed-off-by: NYan, Zheng <zyan@redhat.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Following sequence of events can happen.
  - Client releases an inode, queues cap release message.
  - A 'lookup' reply brings the same inode back, but the reply
    doesn't contain xattrs because MDS didn't receive the cap release
    message and thought client already has up-to-data xattrs.

The fix is force sending a getattr request to MDS if xattrs_version
is 0. The getattr mask is set to CEPH_STAT_CAP_XATTR, so MDS knows client
does not have xattr.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

max_discard_sectors must be set for the queue to support discard.
Operations implementing discard for rbd zero data, so report that.
Signed-off-by: NJosh Durgin <josh.durgin@inktank.com>

Only allocate two osd ops for discard requests, since the
preallocation hint is only added for regular writes.  Use
rbd_img_obj_request_fill() to recreate the original write or discard
osd operations, isolating that logic to one place, and change the
assert in rbd_osd_req_create_copyup() to accept discard requests as
well.
Signed-off-by: NJosh Durgin <josh.durgin@inktank.com>

rbd_img_request_fill() creates a ceph_osd_request and has logic for
adding the appropriate osd ops to it based on the request type and
image properties.

For layered images, the original rbd_obj_request is resent with a
copyup operation in front, using a new ceph_osd_request. The logic for
adding the original operations should be the same as when first
sending them, so move it to a helper function.

op_type only needs to be checked once, so create a helper for that as
well and call it outside the loop in rbd_img_request_fill().
Signed-off-by: NJosh Durgin <josh.durgin@inktank.com>

Discard requests are a form of write, so they should go through the
same process as plain write requests and trigger copy-on-write for
layered images.
Signed-off-by: NJosh Durgin <josh.durgin@inktank.com>

Discard may try to delete an object from a non-layered image that does not exist.
If this occurs, the image already has no data in that range, so change the
result to success.
Signed-off-by: NJosh Durgin <josh.durgin@inktank.com>

Discards take a reference to the snapshot context of an image when
they are created.  This reference needs to be cleaned up when the
request is done just as it is for regular writes.
Signed-off-by: NJosh Durgin <josh.durgin@inktank.com>

In rbd_img_request_fill() the image size is only checked to determine
whether we can truncate an object instead of zeroing it for discard
requests. Take rbd_dev->header_rwsem while reading the image size, and
move this read into the discard check, so that non-discard ops don't
need to take the semaphore in this function.
Signed-off-by: NJosh Durgin <josh.durgin@inktank.com>

This patch add the discard support for rbd driver.

There are three types operation in the driver:
1. The objects would be removed if they completely contained
   within the discard range.
2. The objects would be truncated if they partly contained within
   the discard range, and align with their boundary.
3. Others would be zeroed.

A discard request from blkdev_issue_discard() is defined which
REQ_WRITE and REQ_DISCARD both marked and no data, so we must
check the REQ_DISCARD first when getting the request type.

This resolve:
	http://tracker.ceph.com/issues/190

[ Ilya Dryomov: This is incomplete and somewhat buggy, see follow up
  commits by Josh Durgin for refinements and fixes which weren't
  folded in to preserve authorship. ]
Signed-off-by: NGuangliang Zhao <lucienchao@gmail.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

It could only handle the read and write operations now,
extend it for the coming discard support.
Signed-off-by: NGuangliang Zhao <lucienchao@gmail.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

It need to copyup the parent's content when layered writing,
but an entire object write would overwrite it, so skip it.
Signed-off-by: NGuangliang Zhao <lucienchao@gmail.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

To clarify the conditions and make it easier to add new ones.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>

These fields may both change while the image is mapped if a snapshot
is created or deleted or the image is resized.  They are guarded by
rbd_dev->header_rwsem, so hold that while reading them, and store a
local copy to refer to outside of the critical section. The local copy
will stay consistent since the snapshot context is reference counted,
and the mapping size is just a u64. This prevents torn loads from
giving us inconsistent values.

Move reading header.snapc into the caller of rbd_img_request_create()
so that we only need to take the semaphore once. The read-only caller,
rbd_parent_request_create() can just pass NULL for snapc, since the
snapshot context is only relevant for writes.
Signed-off-by: NJosh Durgin <josh.durgin@inktank.com>

Trying to map an image out of a pool for which we don't have an 'x'
permission bit fails with -ERANGE from ceph_extract_encoded_string()
due to an unsigned vs signed bug.  Fix it and get rid of the -EINVAL
sink, thus propagating rbd::get_id cls method errors.  (I've seen
a bunch of unexplained -ERANGE reports, I bet this is it).
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

queue_work() doesn't "fail to queue", it returns false if work was
already on a queue, which can't happen here since we allocate
event_work right before we queue it.  So don't bother at all.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

we may corrupt waiting list if a request in the waiting list is kicked.
Signed-off-by: NYan, Zheng <zyan@redhat.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Signed-off-by: NYan, Zheng <zyan@redhat.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Use the more common pr_warn.

Other miscellanea:

o Coalesce formats
o Realign arguments
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>

So the recovering MDS does not need to fetch these ununsed inodes during
cache rejoin. This may reduce MDS recovery time.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

If the state variable is krealloced successfully, map->osd_state will be
freed, once following two reallocation failed, and exit the function
without resetting map->osd_state, map->osd_state become a wild pointer.

fix it by resetting them after krealloc successfully.
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>

We want "cbc(aes)" algorithm, so select CRYPTO_CBC too, not just
CRYPTO_AES.  Otherwise on !CRYPTO_CBC kernels we fail rbd map/mount
with

    libceph: error -2 building auth method x request
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>

Both not yet registered (r_linger && list_empty(&r_linger_item)) and
registered linger requests should use the new tid on resend to avoid
the dup op detection logic on the OSDs, yet we were doing this only for
"registered" case.  Factor out and simplify the "registered" logic and
use the new helper for "not registered" case as well.

Fixes: http://tracker.ceph.com/issues/8806Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Introduce __enqueue_request() and switch to it.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Pull SCSI fixes from James Bottomley:
 "This is a set of two small fixes, both to code which went in during
  the merge window: cxgb4i has a scheduling in atomic bug in its new
  ipv6 code and uas fails to work properly with the new scsi-mq code"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] uas: disable use of blk-mq I/O path
  [SCSI] cxgb4i: avoid holding mutex in interrupt context

Pull kconfig fixes for tiny setups from Josh Triplett:
 "Two Kconfig bugfixes for 3.17 related to tinification.  These fixes
  make the Kconfig "General Setup" menu much more usable"

* tag 'tiny/kconfig-for-3.17' of https://git.kernel.org/pub/scm/linux/kernel/git/josh/linux:
  init/Kconfig: Fix HAVE_FUTEX_CMPXCHG to not break up the EXPERT menu
  init/Kconfig: Hide printk log config if CONFIG_PRINTK=n

commit 03b8c7b6 ("futex: Allow
architectures to skip futex_atomic_cmpxchg_inatomic() test") added the
HAVE_FUTEX_CMPXCHG symbol right below FUTEX.  This placed it right in
the middle of the options for the EXPERT menu.  However,
HAVE_FUTEX_CMPXCHG does not depend on EXPERT or FUTEX, so Kconfig stops
placing items in the EXPERT menu, and displays the remaining several
EXPERT items (starting with EPOLL) directly in the General Setup menu.

Since both users of HAVE_FUTEX_CMPXCHG only select it "if FUTEX", make
HAVE_FUTEX_CMPXCHG itself depend on FUTEX.  With this change, the
subsequent items display as part of the EXPERT menu again; the EMBEDDED
menu now appears as the next top-level item in the General Setup menu,
which makes General Setup much shorter and more usable.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: stable <stable@vger.kernel.org>

The buffers sized by CONFIG_LOG_BUF_SHIFT and
CONFIG_LOG_CPU_MAX_BUF_SHIFT do not exist if CONFIG_PRINTK=n, so don't
ask about their size at all.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: stable <stable@vger.kernel.org>

Pull i2c fixes from Wolfram Sang:
 "Two i2c driver bugfixes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: qup: Fix order of runtime pm initialization
  i2c: rk3x: fix 0 length write transfers

Merge tag 'trace-fixes-v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull trace ring buffer iterator fix from Steven Rostedt:
 "While testing some new changes for 3.18, I kept hitting a bug every so
  often in the ring buffer.  At first I thought it had to do with some
  of the changes I was working on, but then testing something else I
  realized that the bug was in 3.17 itself.  I ran several bisects as
  the bug was not very reproducible, and finally came up with the commit
  that I could reproduce easily within a few minutes, and without the
  change I could run the tests over an hour without issue.  The change
  fit the bug and I figured out a fix.  That bad commit was:

    Commit 651e22f2 "ring-buffer: Always reset iterator to reader page"

  This commit fixed a bug, but in the process created another one.  It
  used the wrong value as the cached value that is used to see if things
  changed while an iterator was in use.  This made it look like a change
  always happened, and could cause the iterator to go into an infinite
  loop"

* tag 'trace-fixes-v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ring-buffer: Fix infinite spin in reading buffer

Pull cifs/smb3 fixes from Steve French:
 "Fix for CIFS/SMB3 oops on reconnect during readpages (3.17 regression)
  and for incorrectly closing file handle in symlink error cases"

* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Fix readpages retrying on reconnects
  Fix problem recognizing symlinks

Pull raid5 discard fix from Neil Brown:
 "One fix for raid5 discard issue"

* tag 'md/3.17-final-fix' of git://neil.brown.name/md:
  md/raid5: disable 'DISCARD' by default due to safety concerns.

Pull drm fixes from Dave Airlie:
 "Nothing too major or scary.

  One i915 regression fix, nouveau has a tmds regression fix, along with
  a regression fix for the runtime pm code for optimus laptops not
  restoring the display hw correctly"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau: make sure display hardware is reinitialised on runtime resume
  drm/nouveau: punt fbcon resume out to a workqueue
  drm/nouveau: fix regression on original nv50 board
  drm/nv50/disp: fix dpms regression on certain boards
  drm/i915: Flush the PTEs after updating them before suspend

The uas driver uses the block layer tag for USB3 stream IDs.  With
blk-mq we can get larger tag numbers that the queue depth, which breaks
this assumption.  A fix is under way for 3.18, but sits on top of
large changes so can't easily be backported.   Set the disable_blk_mq
path so that a uas device can't easily crash the system when using
blk-mq for SCSI.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Pull ACPI and power management fixes from Rafael Wysocki:
 "These are three regression fixes (cpufreq core, pcc-cpufreq, i915 /
  ACPI) and one trivial fix for a callback return value mismatch in the
  cpufreq integrator driver.

  Specifics:

   - A recent cpufreq core fix went too far and introduced a regression
     in the system suspend code path.  Fix from Viresh Kumar.

   - An ACPI-related commit in the i915 driver that fixed backlight
     problems for some Thinkpads inadvertently broke a Dell machine (in
     3.16).  Fix from Aaron Lu.

   - The pcc-cpufreq driver was broken during the 3.15 cycle by a commit
     that put wait_event() under a spinlock by mistake.  Fix that
     (Rafael J Wysocki).

   - The return value type of integrator_cpufreq_remove() is void, but
     should be int.  Fix from Arnd Bergmann"

* tag 'pm+acpi-3.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: update 'cpufreq_suspended' after stopping governors
  ACPI / i915: Update the condition to ignore firmware backlight change request
  cpufreq: integrator: fix integrator_cpufreq_remove return type
  cpufreq: pcc-cpufreq: Fix wait_event() under spinlock

final regression fix for 3.17.

* tag 'drm-intel-fixes-2014-10-02' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Flush the PTEs after updating them before suspend

The runtime pm calls need to be done before populating the children via the
i2c_add_adapter call.  If this is not done, a child can run into issues trying
to do i2c read/writes due to the pm_runtime_sync failing.
Signed-off-by: NAndy Gross <agross@codeaurora.org>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NBjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org