Signed-off-by: NDavid Sterba <dsterba@suse.com>

It's provided by the extent_buffer.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It's provided by the extent_buffer.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It's provided by the extent_buffer.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It's provided by the extent_buffer.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It's provided by the extent_buffer.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NDavid Sterba <dsterba@suse.com>

The merge call was factored out to a separate helper but it's a trivial
one and arguably we can opencode it and cache the value.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The value of page_end is only stored to end, no other use.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

All callers pass a valid pointer so we can drop the redundant checks.
The call to submit_one_bio never happend and can be removed.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In case of raid56, writes and rebuilds always take BTRFS_STRIPE_LEN(64K)
as unit, however, scrub_extent() sets blocksize as unit, so rebuild
process may be triggered on every block on a same stripe.

A typical example would be that when we're replacing a disappeared disk,
all reads on the disks get -EIO, every block (size is 4K if blocksize is
4K) would go thru these,

scrub_handle_errored_block
  scrub_recheck_block # re-read pages one by one
  scrub_recheck_block # rebuild by calling raid56_parity_recover()
                        page by page

Although with raid56 stripe cache most of reads during rebuild can be
avoided, the parity recover calculation(xor or raid6 algorithms) needs to
be done $(BTRFS_STRIPE_LEN / blocksize) times.

This makes it smarter by doing raid56 scrub/replace on stripe length.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Sort mount options by the primary name, followed by the 'no-'
counterpart if it exists. Group the deprecated and debugging options.
Enum and token defintions are synced.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Btrfs has two mount options for SSD optimizations: ssd and ssd_spread.
Presently there is an option to disable all SSD optimizations, but there
isn't an option to disable just ssd_spread.

This patch adds a mount option nossd_spread that disables ssd_spread
only.
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NHoward McLauchlan <hmclauchlan@fb.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since userspace transaction have been removed we no longer have use
for this field so delete it.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Now that the userspace transaction ioctls have been removed,
TRANS_USERSPACE is no longer used hence we can remove it.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Now that the userspace transaction IOCTL have been removed, this member
is no longer used so just remove it
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Commit 3558d4f8 ("btrfs: Deprecate userspace transaction ioctls")
marked the beginning of the end of userspace transaction. This commit
finishes the job! There are no known users and ceph does not use the
ioctl anymore.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Acked-by: NSage Weil <sage@redhat.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

btrfs: qgroup: Fix root item corruption when multiple same source snapshots are created with quota enabled

When multiple pending snapshots referring to the same source subvolume
are executed, enabled quota will cause root item corruption, where root
items are using old bytenr (no backref in extent tree).

This can be triggered by fstests btrfs/152.

The cause is when source subvolume is still dirty, extra commit
(simplied transaction commit) of qgroup_account_snapshot() can skip
dirty roots not recorded in current transaction, making root item of
source subvolume not updated.

Fix it by forcing recording source subvolume in current transaction
before qgroup sub-transaction commit.
Reported-by: NJustin Maggard <jmaggard@netgear.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When performing an unlock on an extent buffer we'd like to order the
decrement of extent_buffer::blocking_writers with waking up any
waiters. In such situations it's sufficient to use smp_mb__after_atomic
rather than the heavy smp_mb. On architectures where atomic operations
are fully ordered (such as x86 or s390) unconditionally executing
a heavyweight smp_mb instruction causes a severe hit to performance
while bringin no improvements in terms of correctness.

The better thing is to use the appropriate smp_mb__after_atomic routine
which will do the correct thing (invoke a full smp_mb or in the case
of ordered atomics insert a compiler barrier). Put another way,
an RMW atomic op + smp_load__after_atomic equals, in terms of
semantics, to a full smp_mb. This ensures that none of the problems
described in the accompanying comment of waitqueue_active occur.
No functional changes.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Some functions can filter metadata by the generation. Add a define that
will annotate such arguments.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The called function name is self explanatory.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The current implementation of btrfs_page_exists_in_range() gives the
wrong answer if the workingset code has stored a shadow entry in the
page cache.  The filemap_range_has_page() function does not have this
problem, and it's shared code, so use it instead.
eigned-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In the last step of scrub_handle_error_block, we try to combine good
copies on all possible mirrors, this works fine for raid1 and raid10,
but not for raid56 as it's doing parity rebuild.

If parity rebuild doesn't get back with correct data which matches its
checksum, in case of replace we'd rather write what is stored in the
source device than the data calculuated from parity.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

async_missing_raid56() is identical to async_read_rebuild().
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Previously, btrfs_inode_by_name() returned 0 which left caller to check
objectid of location even location if the type was invalid.

Let btrfs_inode_by_name() return -EUCLEAN if a corrupted location of a
dir entry is found.  Removal of label out_err also simplifies the
function.
Signed-off-by: NSu Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ drop unlikely ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This function btrfs_close_extra_devices() is about freeing
extra devids which once it may have belonged to this filesystem.
So rename it and add the comment. The _devid suffix is
appropriate as this function won't handle devices which are
outside of the filesytem being mounted.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This argument is always set to the root of the inode, which is also
passed. So let's get a reference inside the function and simplify
the arg list.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

According to tlv_put()'s prototype, data and attrlen needs to be
exchanged in the macro, but seems all callers are already aware of
this misorder and are therefore not affected.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Now that nothing uses the root arg of btrfs_log_dentry_safe it can be
safely removed. No functional changes.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

btrfs_log_inode_parent is called from 2 places (btrfs_log_dentry_safe
and btrfs_log_new_name) both of which pass inode->root as the root
argument and the inode itself. Remove the redundant root argument and
get a reference to the root directly from the inode, also remove
redundant root != inode->root check from the same function. No
functional change.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This function always sets keep_locks to 1 and saves the old value of
keep_locks which is restored at the end. So there is no way it can be
called without keep_locks being set. Remove comment imposing redundant
requirement on callers.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There's a proper header for xattr handlers.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The xattr_handler::get prototype returns int, use it. The only ssize_t
exception is the per-inode listxattr handler.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Extern for functions does not make any difference, there are only a few
so let's remove them before it's too late.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When send finishes processing an inode representing a regular file, it
always issues a truncate operation for that file, even if its size did
not change or the last write sets the file size correctly. In the most
common cases, the issued write operations set the file to correct size
(either full or incremental sends) or the file size did not change (for
incremental sends), so the only case where a truncate operation is needed
is when a file size becomes smaller in the send snapshot when compared
to the parent snapshot.

By not issuing unnecessary truncate operations we reduce the stream size
and save time in the receiver. Currently truncating a file to the same
size triggers writeback of its last page (if it's dirty) and waits for it
to complete (only if the file size is not aligned with the filesystem's
sector size). This is being fixed by another patch and is independent of
this change (that patch's title is "Btrfs: skip writeback of last page
when truncating file to same size").

The following script was used to measure time spent by a receiver without
this change applied, with this change applied, and without this change and
with the truncate fix applied (the fix to not make it start and wait for
writeback to complete).

  $ cat test_send.sh
  #!/bin/bash

  SRC_DEV=/dev/sdc
  DST_DEV=/dev/sdd
  SRC_MNT=/mnt/sdc
  DST_MNT=/mnt/sdd

  mkfs.btrfs -f $SRC_DEV >/dev/null
  mkfs.btrfs -f $DST_DEV >/dev/null
  mount $SRC_DEV $SRC_MNT
  mount $DST_DEV $DST_MNT

  echo "Creating source filesystem"
  for ((t = 0; t < 10; t++)); do
      (
          for ((i = 1; i <= 20000; i++)); do
              xfs_io -f -c "pwrite -S 0xab 0 5000" \
                  $SRC_MNT/file_$i > /dev/null
          done
      ) &
     worker_pids[$t]=$!
  done
  wait ${worker_pids[@]}

  echo "Creating and sending snapshot"
  btrfs subvolume snapshot -r $SRC_MNT $SRC_MNT/snap1 >/dev/null
  /usr/bin/time -f "send took %e seconds"    \
         btrfs send -f $SRC_MNT/send_file $SRC_MNT/snap1
  /usr/bin/time -f "receive took %e seconds" \
         btrfs receive -f $SRC_MNT/send_file $DST_MNT

  umount $SRC_MNT
  umount $DST_MNT

The results, which are averages for 5 runs for each case, were the
following:

* Without this change

average receive time was 26.49 seconds
standard deviation of 2.53 seconds

* Without this change and with the truncate fix

average receive time was 12.51 seconds
standard deviation of 0.32 seconds

* With this change and without the truncate fix

average receive time was 10.02 seconds
standard deviation of 1.11 seconds
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When we truncate a file to the same size and that size is not aligned
with the sector size, we end up triggering writeback (and wait for it to
complete) of the last page. This is unncessary as we can not have delayed
allocation beyond the inode's i_size and the goal of truncating a file
to its own size is to discard prealloc extents (allocated via the
fallocate(2) system call). Besides the unnecessary IO start and wait, it
also breaks the oppurtunity for larger contiguous extents on disk, as
before the last dirty page there might be other dirty pages.

This scenario is probably not very common in general, however it is
common for btrfs receive implementations because currently the send
stream always issues a truncate operation for each processed inode as
the last operation for that inode (this truncate operation is not
always needed and the send implementation will be addressed to avoid
them).

So improve this by not starting and waiting for writeback of the inode's
last page when we are truncating to exactly the same size.

The following script was used to quickly measure the time a receive
operation takes:

 $ cat test_send.sh
 #!/bin/bash

 SRC_DEV=/dev/sdc
 DST_DEV=/dev/sdd
 SRC_MNT=/mnt/sdc
 DST_MNT=/mnt/sdd

 mkfs.btrfs -f $SRC_DEV >/dev/null
 mkfs.btrfs -f $DST_DEV >/dev/null
 mount $SRC_DEV $SRC_MNT
 mount $DST_DEV $DST_MNT

 echo "Creating source filesystem"
 for ((t = 0; t < 10; t++)); do
     (
         for ((i = 1; i <= 20000; i++)); do
             xfs_io -f -c "pwrite -S 0xab 0 5000" \
                $SRC_MNT/file_$i > /dev/null
         done
     ) &
     worker_pids[$t]=$!
 done
 wait ${worker_pids[@]}

 echo "Creating and sending snapshot"
 btrfs subvolume snapshot -r $SRC_MNT $SRC_MNT/snap1 >/dev/null
 /usr/bin/time -f "send took %e seconds"    \
     btrfs send -f $SRC_MNT/send_file $SRC_MNT/snap1
 /usr/bin/time -f "receive took %e seconds" \
     btrfs receive -f $SRC_MNT/send_file $DST_MNT

 umount $SRC_MNT
 umount $DST_MNT

The results for 5 runs were the following:

* Without this change

average receive time was 26.49 seconds
standard deviation of 2.53 seconds

* With this change

average receive time was 12.51 seconds
standard deviation of 0.32 seconds
Reported-by: NRobbie Ko <robbieko@synology.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It doens't make sense to process prealloc extents as pages will be
filled with zero when reading prealloc extents.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We have btrfs_fs_info::data_chunk_allocations and
btrfs_fs_info::metadata_ratio declared as unsigned which would be
unsinged int and kernel style prefers unsigned int over bare unsigned.
So this patch changes them to u32.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Using any kind of memory barriers around atomic operations which have
a return value is redundant, since those operations themselves are
fully ordered. atomic_t.txt states:

    - RMW operations that have a return value are fully ordered;

    Fully ordered primitives are ordered against everything prior and
    everything subsequent. Therefore a fully ordered primitive is like
    having an smp_mb() before and an smp_mb() after the primitive.

Given this let's replace the extra memory barriers with comments.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>