Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 18 6月, 2019 1 次提交
  3. 11 6月, 2019 2 次提交
    • A
      perf trace: Skip unknown syscalls when expanding strace like syscall groups · 04c41bcb
      由 Arnaldo Carvalho de Melo 提交于 
      We have $INSTALL_DIR/share/perf-core/strace/groups/string files with
syscalls that should be selected when 'string' is used, meaning, in this
case, syscalls that receive as one of its arguments a string, like a
pathname.

But those were first selected and tested on x86_64, and end up failing
in architectures where some of those syscalls are not available, like
the 'access' syscall on arm64, which makes using 'perf trace -e string'
in such archs to fail.

Since this the routine doing the validation is used only when reading
such files, do not fail when some syscall is not found in the
syscalltbl, instead just use pr_debug() to register that in case people
are suspicious of problems.

Now using 'perf trace -e string' should work on arm64, selecting only
the syscalls that have a string and are available on that architecture.
Reported-by: NLeo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/r/20190610184754.GU21245@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      04c41bcb
    • L
      perf trace: Exit when failing to build eBPF program · 012749ca
      由 Leo Yan 提交于 
      On my Juno board with ARM64 CPUs, perf trace command reports the eBPF
program building failure but the command will not exit and continue to
run.  If we define an eBPF event in config file, the event will be
parsed with below flow:

  perf_config()
    `> trace__config()
         `> parse_events_option()
              `> parse_events__scanner()
                   `-> parse_events_parse()
                         `> parse_events_load_bpf()
                              `> llvm__compile_bpf()

Though the low level functions return back error values when detect eBPF
building failure, but parse_events_option() returns 1 for this case and
trace__config() passes 1 to perf_config(); perf_config() doesn't treat
the returned value 1 as failure and it continues to parse other
configurations.  Thus the perf command continues to run even without
enabling eBPF event successfully.

This patch changes error handling in trace__config(), when it detects
failure it will return -1 rather than directly pass error value (1);
finally, perf_config() will directly bail out and perf will exit for
this case.

Committer notes:

Simplified the patch to just check directly the return of
parse_events_option() and it it is non-zero, change err from its initial
zero value to -1.
Signed-off-by: NLeo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Yonghong Song <yhs@fb.com>
Fixes: ac96287c ("perf trace: Allow specifying a set of events to add in perfconfig")
Link: https://lkml.kernel.org/n/tip-x4i63f5kscykfok0hqim3zma@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      012749ca
  5. 05 6月, 2019 4 次提交
  7. 29 5月, 2019 6 次提交
    • A
      perf trace: Beautify 'sync_file_range' arguments · a9a187a7
      由 Arnaldo Carvalho de Melo 提交于 
      Use existing beautifiers for the first arg, fd, assigned using the
heuristic that looks for syscall arg names and associates SCA_FD with
'fd' named argumes, and wire up the recently introduced sync_file_range
flags table generator.

Now it should be possible to just use:

   perf trace -e sync_file_range

As root and see all sync_file_range syscalls with its args beautified.

  Doing a syscall strace like session looking for this syscall, then run
  postgresql's initdb command:

  # perf trace -e sync_file_range
  <SNIP>
  initdb/1332 sync_file_range(6</var/lib/pgsql/data/global/1260_fsm>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
  initdb/1332 sync_file_range(6</var/lib/pgsql/data/global/1260_fsm>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
  initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
  initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
  initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
  initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
  initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
  initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
  initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
  initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
  initdb/1332 sync_file_range(7</var/lib/pgsql/data/base/1/2682>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
  initdb/1332 sync_file_range(6</var/lib/pgsql/data/global/1260_fsm>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
  initdb/1332 sync_file_range(7</var/lib/pgsql/data/base/1/2682>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
  initdb/1332 sync_file_range(6</var/lib/pgsql/data/global/1260_fsm>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
  initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
  initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
  initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
  initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
  initdb/1332 sync_file_range(4</var/lib/pgsql/data>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
  initdb/1332 sync_file_range(4</var/lib/pgsql/data>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
  ^C
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8tqy34xhpg8gwnaiv74xy93w@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a9a187a7
    • A
      perf trace: Beautify 'fsmount' arguments · f6af0956
      由 Arnaldo Carvalho de Melo 提交于 
      Use existing beautifiers for the first arg, fd, assigned using the
heuristic that looks for syscall arg names and associates SCA_FD with
'fd' named argumes, and wire up the recently introduced fsmount
attr_flags table generator.

Now it should be possible to just use:

   perf trace -e fsmount

As root and see all fsmount syscalls with its args beautified.

  # cat sys_fsmount.c
  #define _GNU_SOURCE        /* See feature_test_macros(7) */
  #include <unistd.h>
  #include <sys/syscall.h>   /* For SYS_xxx definitions */

  #define __NR_fsmount 432

  #define MOUNT_ATTR_RDONLY	 0x00000001 /* Mount read-only */
  #define MOUNT_ATTR_NOSUID	 0x00000002 /* Ignore suid and sgid bits */
  #define MOUNT_ATTR_NODEV	 0x00000004 /* Disallow access to device special files */
  #define MOUNT_ATTR_NOEXEC	 0x00000008 /* Disallow program execution */
  #define MOUNT_ATTR__ATIME	 0x00000070 /* Setting on how atime should be updated */
  #define MOUNT_ATTR_RELATIME	 0x00000000 /* - Update atime relative to mtime/ctime. */
  #define MOUNT_ATTR_NOATIME	 0x00000010 /* - Do not update access times. */
  #define MOUNT_ATTR_STRICTATIME 0x00000020 /* - Always perform atime updates */
  #define MOUNT_ATTR_NODIRATIME	 0x00000080 /* Do not update directory access times */

  static inline int sys_fsmount(int fs_fd, int flags, int attr_flags)
  {
  	syscall(__NR_fsmount, fs_fd, flags, attr_flags);
  }

  int main(int argc, char *argv[])
  {
  	int attr_flags = 0, fs_fd = 0;

  	sys_fsmount(fs_fd++, 0, attr_flags);
  	attr_flags |= MOUNT_ATTR_RDONLY;
  	sys_fsmount(fs_fd++, 1, attr_flags);
  	attr_flags |= MOUNT_ATTR_NOSUID;
  	sys_fsmount(fs_fd++, 0, attr_flags);
  	attr_flags |= MOUNT_ATTR_NODEV;
  	sys_fsmount(fs_fd++, 1, attr_flags);
  	attr_flags |= MOUNT_ATTR_NOEXEC;
  	sys_fsmount(fs_fd++, 0, attr_flags);
  	attr_flags |= MOUNT_ATTR_NOATIME;
  	sys_fsmount(fs_fd++, 1, attr_flags);
  	attr_flags |= MOUNT_ATTR_STRICTATIME;
  	sys_fsmount(fs_fd++, 0, attr_flags);
  	attr_flags |= MOUNT_ATTR_NODIRATIME;
  	sys_fsmount(fs_fd++, 0, attr_flags);
  	return 0;
  }
  #
  # perf trace -e fsmount ./sys_fsmount
  fsmount(0, 0, MOUNT_ATTR_RELATIME)      = -1 EINVAL (Invalid argument)
  fsmount(1, FSMOUNT_CLOEXEC, MOUNT_ATTR_RDONLY|MOUNT_ATTR_RELATIME) = -1 EINVAL (Invalid argument)
  fsmount(2, 0, MOUNT_ATTR_RDONLY|MOUNT_ATTR_NOSUID|MOUNT_ATTR_RELATIME) = -1 EINVAL (Invalid argument)
  fsmount(3, FSMOUNT_CLOEXEC, MOUNT_ATTR_RDONLY|MOUNT_ATTR_NOSUID|MOUNT_ATTR_NODEV|MOUNT_ATTR_RELATIME) = -1 EBADF (Bad file descriptor)
  fsmount(4, 0, MOUNT_ATTR_RDONLY|MOUNT_ATTR_NOSUID|MOUNT_ATTR_NODEV|MOUNT_ATTR_NOEXEC|MOUNT_ATTR_RELATIME) = -1 EBADF (Bad file descriptor)
  fsmount(5, FSMOUNT_CLOEXEC, MOUNT_ATTR_RDONLY|MOUNT_ATTR_NOSUID|MOUNT_ATTR_NODEV|MOUNT_ATTR_NOEXEC|MOUNT_ATTR_NOATIME) = -1 EBADF (Bad file descriptor)
  fsmount(6, 0, MOUNT_ATTR_RDONLY|MOUNT_ATTR_NOSUID|MOUNT_ATTR_NODEV|MOUNT_ATTR_NOEXEC|MOUNT_ATTR_NOATIME|MOUNT_ATTR_STRICTATIME) = -1 EINVAL (Invalid argument)
  fsmount(7, 0, MOUNT_ATTR_RDONLY|MOUNT_ATTR_NOSUID|MOUNT_ATTR_NODEV|MOUNT_ATTR_NOEXEC|MOUNT_ATTR_NOATIME|MOUNT_ATTR_STRICTATIME|MOUNT_ATTR_NODIRATIME) = -1 EINVAL (Invalid argument)
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-w71uge0sfo6ns9uclhwtthca@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f6af0956
    • A
      perf trace: Introduce syscall_arg__scnprintf_strarray_flags · f5b91dbb
      由 Arnaldo Carvalho de Melo 提交于 
      So that one can just define a strarray and process it as a set of flags,
similar to syscall_arg__scnprintf_strarray() with plain arrays.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-nnt25wkpkow2w0yefhi6sb7q@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f5b91dbb
    • A
      perf trace: Beautify 'fsconfig' arguments · dcc6fd64
      由 Arnaldo Carvalho de Melo 提交于 
      Use existing beautifiers for the first arg, fd, assigned using the
heuristic that looks for syscall arg names and associates SCA_FD with
'fd' named argumes, and wire up the recently introduced fsconfig cmd
table generator.

Now it should be possible to just use:

   perf trace -e fsconfig

As root and see all fsconfig syscalls with its args beautified, more
work needed to look at the command and according to it handle the 'key',
'value' and 'aux' args, using the 'fcntl' and 'futex' beautifiers as a
starting point to see how to suppress sets of these last three args that
may not be used by the 'cmd' arg, etc.

  # cat sys_fsconfig.c
  #define _GNU_SOURCE         /* See feature_test_macros(7) */
  #include <unistd.h>
  #include <sys/syscall.h>   /* For SYS_xxx definitions */
  #include <fcntl.h>

  #define __NR_fsconfig 431

  enum fsconfig_command {
  	FSCONFIG_SET_FLAG	= 0,	/* Set parameter, supplying no value */
  	FSCONFIG_SET_STRING	= 1,	/* Set parameter, supplying a string value */
  	FSCONFIG_SET_BINARY	= 2,	/* Set parameter, supplying a binary blob value */
  	FSCONFIG_SET_PATH	= 3,	/* Set parameter, supplying an object by path */
  	FSCONFIG_SET_PATH_EMPTY	= 4,	/* Set parameter, supplying an object by (empty) path */
  	FSCONFIG_SET_FD		= 5,	/* Set parameter, supplying an object by fd */
  	FSCONFIG_CMD_CREATE	= 6,	/* Invoke superblock creation */
  	FSCONFIG_CMD_RECONFIGURE = 7,	/* Invoke superblock reconfiguration */
  };

  static inline int sys_fsconfig(int fd, int cmd, const char *key, const void *value, int aux)
  {
  	syscall(__NR_fsconfig, fd, cmd, key, value, aux);
  }

  int main(int argc, char *argv[])
  {
  	int fd = 0, aux = 0;

  	open("/foo", 0);
  	sys_fsconfig(fd++, FSCONFIG_SET_FLAG,	     "/foo1", "/bar1", aux++);
  	sys_fsconfig(fd++, FSCONFIG_SET_STRING,	     "/foo2", "/bar2", aux++);
  	sys_fsconfig(fd++, FSCONFIG_SET_BINARY,	     "/foo3", "/bar3", aux++);
  	sys_fsconfig(fd++, FSCONFIG_SET_PATH,	     "/foo4", "/bar4", aux++);
  	sys_fsconfig(fd++, FSCONFIG_SET_PATH_EMPTY,  "/foo5", "/bar5", aux++);
  	sys_fsconfig(fd++, FSCONFIG_SET_FD,	     "/foo6", "/bar6", aux++);
  	sys_fsconfig(fd++, FSCONFIG_CMD_CREATE,	     "/foo7", "/bar7", aux++);
  	sys_fsconfig(fd++, FSCONFIG_CMD_RECONFIGURE, "/foo8", "/bar8", aux++);
  	return 0;
  }
  # trace -e fsconfig ./sys_fsconfig
  fsconfig(0, FSCONFIG_SET_FLAG, 0x40201b, 0x402015, 0) = -1 EINVAL (Invalid argument)
  fsconfig(1, FSCONFIG_SET_STRING, 0x402027, 0x402021, 1) = -1 EINVAL (Invalid argument)
  fsconfig(2, FSCONFIG_SET_BINARY, 0x402033, 0x40202d, 2) = -1 EINVAL (Invalid argument)
  fsconfig(3, FSCONFIG_SET_PATH, 0x40203f, 0x402039, 3) = -1 EBADF (Bad file descriptor)
  fsconfig(4, FSCONFIG_SET_PATH_EMPTY, 0x40204b, 0x402045, 4) = -1 EBADF (Bad file descriptor)
  fsconfig(5, FSCONFIG_SET_FD, 0x402057, 0x402051, 5) = -1 EINVAL (Invalid argument)
  fsconfig(6, FSCONFIG_CMD_CREATE, 0x402063, 0x40205d, 6) = -1 EINVAL (Invalid argument)
  fsconfig(7, FSCONFIG_CMD_RECONFIGURE, 0x40206f, 0x402069, 7) = -1 EINVAL (Invalid argument)
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-fb04b76cm59zfuv1wzu40uxy@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      dcc6fd64
    • A
      perf trace: Beautify 'fspick' arguments · 693bd394
      由 Arnaldo Carvalho de Melo 提交于 
      Use existing beautifiers for the first 2 args (dfd, path) and wire up
the recently introduced fspick flags table generator.

Now it should be possible to just use:

   perf trace -e fspick

As root and see all move_mount syscalls with its args beautified, either
using the vfs_getname perf probe method or using the
augmented_raw_syscalls.c eBPF helper to get the pathnames, the other
args should work in all cases, i.e. all that is needed can be obtained
directly from the raw_syscalls:sys_enter tracepoint args.

  # cat sys_fspick.c
  #define _GNU_SOURCE        /* See feature_test_macros(7) */
  #include <unistd.h>
  #include <sys/syscall.h>   /* For SYS_xxx definitions */
  #include <fcntl.h>

  #define __NR_fspick 433

  #define FSPICK_CLOEXEC          0x00000001
  #define FSPICK_SYMLINK_NOFOLLOW 0x00000002
  #define FSPICK_NO_AUTOMOUNT     0x00000004
  #define FSPICK_EMPTY_PATH       0x00000008

  static inline int sys_fspick(int fd, const char *path, int flags)
  {
  	syscall(__NR_fspick, fd, path, flags);
  }

  int main(int argc, char *argv[])
  {
  	int flags = 0, fd = 0;

  	open("/foo", 0);
  	sys_fspick(fd++, "/foo1", flags);
  	flags |= FSPICK_CLOEXEC;
  	sys_fspick(fd++, "/foo2", flags);
  	flags |= FSPICK_SYMLINK_NOFOLLOW;
  	sys_fspick(fd++, "/foo3", flags);
  	flags |= FSPICK_NO_AUTOMOUNT;
  	sys_fspick(fd++, "/foo4", flags);
  	flags |= FSPICK_EMPTY_PATH;
  	return sys_fspick(fd++, "/foo5", flags);
  }
  # perf trace -e fspick ./sys_fspick
  LLVM: dumping /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
  fspick(0, "/foo1", 0)                   = -1 ENOENT (No such file or directory)
  fspick(1, "/foo2", FSPICK_CLOEXEC)      = -1 ENOENT (No such file or directory)
  fspick(2, "/foo3", FSPICK_CLOEXEC|FSPICK_SYMLINK_NOFOLLOW) = -1 ENOENT (No such file or directory)
  fspick(3, "/foo4", FSPICK_CLOEXEC|FSPICK_SYMLINK_NOFOLLOW|FSPICK_NO_AUTOMOUNT) = -1 ENOENT (No such file or directory)
  fspick(4, "/foo5", FSPICK_CLOEXEC|FSPICK_SYMLINK_NOFOLLOW|FSPICK_NO_AUTOMOUNT|FSPICK_EMPTY_PATH) = -1 ENOENT (No such file or directory)
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-erau5xjtt8wvgnhvdbchstuk@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      693bd394
    • A
      perf trace: Beautify 'move_mount' arguments · 566e3022
      由 Arnaldo Carvalho de Melo 提交于 
      Use existing beautifiers for the first 4 args (to/from fds, pathnames)
and wire up the recently introduced move_mount flags table generator.

Now it should be possible to just use:

      perf trace -e move_mount

As root and see all move_mount syscalls with its args beautified, except
for the filenames, that need work in the augmented_raw_syscalls.c eBPF
helper to pass more than one, see comment in the
augmented_raw_syscalls.c source code, the other args should work in all
cases, i.e. all that is needed can be obtained directly from the
raw_syscalls:sys_enter tracepoint args.

Running without the strace "skin" (.perfconfig setting output formatting
switches to look like strace output + BPF to collect strings, as we
still need to support collecting multiple string args for the same
syscall, like with move_mount):

  # cat sys_move_mount.c
  #define _GNU_SOURCE         /* See feature_test_macros(7) */
  #include <unistd.h>
  #include <sys/syscall.h>   /* For SYS_xxx definitions */

  #define __NR_move_mount 429

  #define MOVE_MOUNT_F_SYMLINKS		0x00000001 /* Follow symlinks on from path */
  #define MOVE_MOUNT_F_AUTOMOUNTS		0x00000002 /* Follow automounts on from path */
  #define MOVE_MOUNT_F_EMPTY_PATH		0x00000004 /* Empty from path permitted */
  #define MOVE_MOUNT_T_SYMLINKS		0x00000010 /* Follow symlinks on to path */
  #define MOVE_MOUNT_T_AUTOMOUNTS		0x00000020 /* Follow automounts on to path */
  #define MOVE_MOUNT_T_EMPTY_PATH		0x00000040 /* Empty to path permitted */

  static inline int sys_move_mount(int from_fd, const char *from_pathname,
  				 int to_fd, const char *to_pathname,
  				 int flags)
  {
  	  syscall(__NR_move_mount, from_fd, from_pathname, to_fd, to_pathname, flags);
  }

  int main(int argc, char *argv[])
  {
  	  int flags = 0, from_fd = 0, to_fd = 100;

  	  sys_move_mount(from_fd++, "/foo", to_fd++, "bar", flags);
  	  flags |= MOVE_MOUNT_F_SYMLINKS;
  	  sys_move_mount(from_fd++, "/foo1", to_fd++, "bar1", flags);
          flags |= MOVE_MOUNT_F_AUTOMOUNTS;
  	  sys_move_mount(from_fd++, "/foo2", to_fd++, "bar2", flags);
          flags |= MOVE_MOUNT_F_EMPTY_PATH;
  	  sys_move_mount(from_fd++, "/foo3", to_fd++, "bar3", flags);
          flags |= MOVE_MOUNT_T_SYMLINKS;
  	  sys_move_mount(from_fd++, "/foo4", to_fd++, "bar4", flags);
          flags |= MOVE_MOUNT_T_AUTOMOUNTS;
  	  sys_move_mount(from_fd++, "/foo5", to_fd++, "bar5", flags);
          flags |= MOVE_MOUNT_T_EMPTY_PATH;
  	  return sys_move_mount(from_fd++, "/foo6", to_fd++, "bar6", flags);
  }
  # mv ~/.perfconfig  ~/.perfconfig.OFF
  # perf trace -e move_mount ./sys_move_mount
       0.000 ( 0.009 ms): sys_move_mount/28971 move_mount(from_pathname: 0x402010, to_dfd: 100, to_pathname: 0x402015) = -1 ENOENT (No such file or directory)
       0.011 ( 0.003 ms): sys_move_mount/28971 move_mount(from_dfd: 1, from_pathname: 0x40201e, to_dfd: 101, to_pathname: 0x402019, flags: F_SYMLINKS) = -1 ENOENT (No such file or directory)
       0.016 ( 0.002 ms): sys_move_mount/28971 move_mount(from_dfd: 2, from_pathname: 0x402029, to_dfd: 102, to_pathname: 0x402024, flags: F_SYMLINKS|F_AUTOMOUNTS) = -1 ENOENT (No such file or directory)
       0.020 ( 0.002 ms): sys_move_mount/28971 move_mount(from_dfd: 3, from_pathname: 0x402034, to_dfd: 103, to_pathname: 0x40202f, flags: F_SYMLINKS|F_AUTOMOUNTS|F_EMPTY_PATH) = -1 ENOENT (No such file or directory)
       0.023 ( 0.002 ms): sys_move_mount/28971 move_mount(from_dfd: 4, from_pathname: 0x40203f, to_dfd: 104, to_pathname: 0x40203a, flags: F_SYMLINKS|F_AUTOMOUNTS|F_EMPTY_PATH|T_SYMLINKS) = -1 ENOENT (No such file or directory)
       0.027 ( 0.002 ms): sys_move_mount/28971 move_mount(from_dfd: 5, from_pathname: 0x40204a, to_dfd: 105, to_pathname: 0x402045, flags: F_SYMLINKS|F_AUTOMOUNTS|F_EMPTY_PATH|T_SYMLINKS|T_AUTOMOUNTS) = -1 ENOENT (No such file or directory)
       0.031 ( 0.017 ms): sys_move_mount/28971 move_mount(from_dfd: 6, from_pathname: 0x402055, to_dfd: 106, to_pathname: 0x402050, flags: F_SYMLINKS|F_AUTOMOUNTS|F_EMPTY_PATH|T_SYMLINKS|T_AUTOMOUNTS|T_EMPTY_PATH) = -1 ENOENT (No such file or directory)
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-83rim8g4k0s4gieieh5nnlck@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      566e3022
  9. 23 2月, 2019 1 次提交
    • J
      perf data: Add global path holder · 2d4f2799
      由 Jiri Olsa 提交于 
      Add a 'path' member to 'struct perf_data'. It will keep the configured
path for the data (const char *). The path in struct perf_data_file is
now dynamically allocated (duped) from it.

This scheme is useful/used in following patches where struct
perf_data::path holds the 'configure' directory path and struct
perf_data_file::path holds the allocated path for specific files.

Also it actually makes the code little simpler.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190221094145.9151-3-jolsa@kernel.org
[ Fixup data-convert-bt.c missing conversion ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      2d4f2799
  11. 20 2月, 2019 1 次提交
    • A
      perf trace: Allow dumping a BPF map after setting up BPF events · ff7a4f98
      由 Arnaldo Carvalho de Melo 提交于 
      Initial use case:

Dumping the maps setup by tools/perf/examples/bpf/augmented_raw_syscalls.c,
which so far are just booleans, showing just non-zeroed entries:

  # cat ~/.perfconfig
  [llvm]
	dump-obj = true
	clang-opt = -g
  [trace]
	#add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
	add_events = /wb/augmented_raw_syscalls.o
  $ date
  Tue Feb 19 16:29:33 -03 2019
  $ ls -la /wb/augmented_raw_syscalls.o
  -rwxr-xr-x. 1 root root 14048 Jan 24 12:09 /wb/augmented_raw_syscalls.o
  $ file /wb/augmented_raw_syscalls.o
  /wb/augmented_raw_syscalls.o: ELF 64-bit LSB relocatable, eBPF, version 1 (SYSV), with debug_info, not stripped
  $
  # trace -e recvmmsg,sendmmsg --map-dump foobar
  ERROR: BPF map "foobar" not found
  # trace -e recvmmsg,sendmmsg --map-dump filtered_pids
  ERROR: BPF map "filtered_pids" not found
  # trace -e recvmmsg,sendmmsg --map-dump pids_filtered
  [2583] = 1,
  [2267] = 1,
  ^Z
  [1]+  Stopped                 trace -e recvmmsg,sendmmsg --map-dump pids_filtered
  # pidof trace
  2267
  # ps ax|grep gnome-terminal|grep -v grep
  2583 ?        Ssl   58:33 /usr/libexec/gnome-terminal-server
  ^C
  # trace -e recvmmsg,sendmmsg --map-dump syscalls
  [299] = 1,
  [307] = 1,
  ^C
  # grep x64_recvmmsg arch/x86/entry/syscalls/syscall_64.tbl
  299	64	recvmmsg		__x64_sys_recvmmsg
  # grep x64_sendmmsg arch/x86/entry/syscalls/syscall_64.tbl
  307	64	sendmmsg		__x64_sys_sendmmsg
  #

Next step probably will be something like 'perf stat's --interval-print and
--interval-clear.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-ztxj25rtx37ixo9cfajt8ocy@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ff7a4f98
  13. 15 2月, 2019 2 次提交
    • A
      perf trace: Filter out gnome-terminal* parent · ca2da70c
      由 Arnaldo Carvalho de Melo 提交于 
      Just like it does with 'sshd', to reduce the feedback loop when doing
system wide tracing on on a gnome GUI.

Need to figure out how to auto-filter the calls to other UI components
tho.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-rjopq5y92itgokppdhe8sc6z@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ca2da70c
    • A
      perf trace: Check if the 'fd' is negative when mapping it to pathname · 05107486
      由 Arnaldo Carvalho de Melo 提交于 
      We were crashing when processing a negative fd:

  Program received signal SIGSEGV, Segmentation fault.
  0x0000000000609bbf in syscall_arg__scnprintf_ioctl_cmd (bf=0x1172eca "", size=2038, arg=0x7fffffff8360) at trace/beauty/ioctl.c:182
  182			if (file->dev_maj == USB_DEVICE_MAJOR)
  Missing separate debuginfos, use: dnf debuginfo-install bzip2-libs-1.0.6-28.fc29.x86_64 elfutils-libelf-0.174-5.fc29.x86_64 elfutils-libs-0.174-5.fc29.x86_64 glib2-2.58.3-1.fc29.x86_64 libbabeltrace-1.5.6-1.fc29.x86_64 libunwind-1.2.1-6.fc29.x86_64 libuuid-2.32.1-1.fc29.x86_64 libxcrypt-4.4.3-2.fc29.x86_64 numactl-libs-2.0.12-1.fc29.x86_64 openssl-libs-1.1.1a-1.fc29.x86_64 pcre-8.42-6.fc29.x86_64 perl-libs-5.28.1-427.fc29.x86_64 popt-1.16-15.fc29.x86_64 python2-libs-2.7.15-11.fc29.x86_64 slang-2.3.2-4.fc29.x86_64 xz-libs-5.2.4-3.fc29.x86_64
  (gdb) bt
  #0  0x0000000000609bbf in syscall_arg__scnprintf_ioctl_cmd (bf=0x1172eca "", size=2038, arg=0x7fffffff8360) at trace/beauty/ioctl.c:182
  #1  0x000000000048e295 in syscall__scnprintf_val (sc=0x123b500, bf=0x1172eca "", size=2038, arg=0x7fffffff8360, val=21519)
      at builtin-trace.c:1594
  #2  0x000000000048e60d in syscall__scnprintf_args (sc=0x123b500, bf=0x1172ec6 "-1, ", size=2042, args=0x7ffff6a7c034 "\377\377\377\377",
      augmented_args=0x7ffff6a7c064, augmented_args_size=4, trace=0x7fffffffa8d0, thread=0x1175cd0) at builtin-trace.c:1661
  #3  0x000000000048f04e in trace__sys_enter (trace=0x7fffffffa8d0, evsel=0xb260b0, event=0x7ffff6a7bfe8, sample=0x7fffffff84f0)
      at builtin-trace.c:1880
  #4  0x00000000004915a4 in trace__handle_event (trace=0x7fffffffa8d0, event=0x7ffff6a7bfe8, sample=0x7fffffff84f0) at builtin-trace.c:2590
  #5  0x0000000000491eed in __trace__deliver_event (trace=0x7fffffffa8d0, event=0x7ffff6a7bfe8) at builtin-trace.c:2818
  #6  0x0000000000492030 in trace__deliver_event (trace=0x7fffffffa8d0, event=0x7ffff6a7bfe8) at builtin-trace.c:2845
  #7  0x0000000000492896 in trace__run (trace=0x7fffffffa8d0, argc=0, argv=0x7fffffffdb58) at builtin-trace.c:3040
  #8  0x000000000049603a in cmd_trace (argc=0, argv=0x7fffffffdb58) at builtin-trace.c:3952
  #9  0x00000000004d5103 in main (argc=1, argv=0x7fffffffdb58) at perf.c:474
  (gdb) p fd
  $1 = -1
  (gdb) p file
  $7 = (struct file *) 0xfffffffffffffff0
  (gdb) p ((struct thread_trace *)arg->thread)->files.table + fd
  $8 = (struct file *) 0xfffffffffffffff0
  (gdb)

Check for that and return NULL instead.

This problem was introduced recently, the other codepaths leading to
thread_trace__files_entry() check for negative fds, like thread__fd_path(),
but we need to do it at thread_trace__files_entry() as more users are now
calling it directly.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 2d473389 ("perf trace beauty: Export function to get the files for a thread")
Link: https://lkml.kernel.org/n/tip-oq7bvaaf07gsd4yqty3107u2@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      05107486
  15. 06 2月, 2019 2 次提交
  17. 05 2月, 2019 1 次提交
    • A
      perf trace: Support multiple "vfs_getname" probes · 6ab3bc24
      由 Arnaldo Carvalho de Melo 提交于 
      With a suitably defined "probe:vfs_getname" probe, 'perf trace' can
"beautify" its output, so syscalls like open() or openat() can print the
"filename" argument instead of just its hex address, like:

  $ perf trace -e open -- touch /dev/null
  [...]
       0.590 ( 0.014 ms): touch/18063 open(filename: /dev/null, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
  [...]

The output without such beautifier looks like:

     0.529 ( 0.011 ms): touch/18075 open(filename: 0xc78cf288, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3

However, when the vfs_getname probe expands to multiple probes and it is
not the first one that is hit, the beautifier fails, as following:

     0.326 ( 0.010 ms): touch/18072 open(filename: , flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3

Fix it by hooking into all the expanded probes (inlines), now, for instance:

  [root@quaco ~]# perf probe -l
    probe:vfs_getname    (on getname_flags:73@fs/namei.c with pathname)
    probe:vfs_getname_1  (on getname_flags:73@fs/namei.c with pathname)
  [root@quaco ~]# perf trace -e open* sleep 1
       0.010 ( 0.005 ms): sleep/5588 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: RDONLY|CLOEXEC)   = 3
       0.029 ( 0.006 ms): sleep/5588 openat(dfd: CWD, filename: /lib64/libc.so.6, flags: RDONLY|CLOEXEC)   = 3
       0.194 ( 0.008 ms): sleep/5588 openat(dfd: CWD, filename: /usr/lib/locale/locale-archive, flags: RDONLY|CLOEXEC) = 3
  [root@quaco ~]#

Works, further verified with:

  [root@quaco ~]# perf test vfs
  65: Use vfs_getname probe to get syscall args filenames   : Ok
  66: Add vfs_getname probe to get syscall args filenames   : Ok
  67: Check open filename arg using perf trace + vfs_getname: Ok
  [root@quaco ~]#
Reported-by: NMichael Petlan <mpetlan@redhat.com>
Tested-by: NMichael Petlan <mpetlan@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-mv8kolk17xla1smvmp3qabv1@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      6ab3bc24
  19. 25 1月, 2019 1 次提交
    • A
      perf trace: Fixup etcsnoop example · 1d59cb1b
      由 Arnaldo Carvalho de Melo 提交于 
      Where we don't have "raw_syscalls:sys_enter", so we need to look for a
"*syscalls:sys_enter*" to initialize the offsets for the
__augmented_syscalls__ evsel, which is the case with etcsnoop, that was
segfaulting, fixed:

  # trace -e /home/acme/git/perf/tools/perf/examples/bpf/etcsnoop.c
     0.000 (         ): gnome-shell/2105 openat(dfd: CWD, filename: "/etc/localtime")                       ...
   631.834 (         ): cat/6521 openat(dfd: CWD, filename: "/etc/ld.so.cache", flags: RDONLY|CLOEXEC) ...
   632.637 (         ): bash/6521 openat(dfd: CWD, filename: "/etc/passwd")                          ...
  ^C#

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: b9b6a2ea ("perf trace: Do not hardcode the size of the tracepoint common_ fields")
Link: https://lkml.kernel.org/n/tip-0tjwcit8qitsmh4nyvf2b0jo@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      1d59cb1b
  21. 09 1月, 2019 2 次提交
  23. 29 12月, 2018 4 次提交
  25. 21 12月, 2018 2 次提交
    • A
      perf trace: Do not hardcode the size of the tracepoint common_ fields · b9b6a2ea
      由 Arnaldo Carvalho de Melo 提交于 
      We shouldn't hardcode the size of the tracepoint common_ fields, use the
offset of the 'id'/'__syscallnr' field in the sys_enter event instead.

This caused the augmented syscalls code to fail on a particular build of a
PREEMPT_RT_FULL kernel where these extra 'common_migrate_disable' and
'common_padding' fields were before the syscall id one:

  # cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/format
  name: sys_enter
  ID: 22
  format:
	field:unsigned short common_type;	offset:0;	size:2;	signed:0;
	field:unsigned char common_flags;	offset:2;	size:1;	signed:0;
	field:unsigned char common_preempt_count;	offset:3;	size:1;	signed:0;
	field:int common_pid;	offset:4;	size:4;	signed:1;
	field:unsigned short common_migrate_disable;	offset:8;	size:2;	signed:0;
	field:unsigned short common_padding;	offset:10;	size:2;	signed:0;

	field:long id;	offset:16;	size:8;	signed:1;
	field:unsigned long args[6];	offset:24;	size:48;	signed:0;

  print fmt: "NR %ld (%lx, %lx, %lx, %lx, %lx, %lx)", REC->id, REC->args[0], REC->args[1], REC->args[2], REC->args[3], REC->args[4], REC->args[5]
  #

All those 'common_' prefixed fields are zeroed when they hit a BPF tracepoint
hook, we better just discard those, i.e. somehow pass an offset to the
BPF program from the start of the ctx and make adjustments in the 'perf trace'
handlers to adjust the offset of the syscall arg offsets obtained from tracefs.

Till then, fix it the quick way and add this to the augmented_raw_syscalls.c to
bet it to work in such kernels:

  diff --git a/tools/perf/examples/bpf/augmented_raw_syscalls.c b/tools/perf/examples/bpf/augmented_raw_syscalls.c
  index 53c233370fae..1f746f931e13 100644
  --- a/tools/perf/examples/bpf/augmented_raw_syscalls.c
  +++ b/tools/perf/examples/bpf/augmented_raw_syscalls.c
  @@ -38,12 +38,14 @@ struct bpf_map SEC("maps") syscalls = {

   struct syscall_enter_args {
          unsigned long long common_tp_fields;
  +       long               rt_common_tp_fields;
          long               syscall_nr;
          unsigned long      args[6];
   };

   struct syscall_exit_args {
          unsigned long long common_tp_fields;
  +       long               rt_common_tp_fields;
          long               syscall_nr;
          long               ret;
   };

Just to check that this was the case. Fix it properly later, for now remove the
hardcoding of the offset in the 'perf trace' side and document the situation
with this patch.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-2pqavrktqkliu5b9nzouio21@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      b9b6a2ea
    • A
      perf trace: Check if the raw_syscalls:sys_{enter,exit} are setup before setting tp filter · f76214f9
      由 Arnaldo Carvalho de Melo 提交于 
      While updating 'perf trace' on an machine with an old precompiled
augmented_raw_syscalls.o that didn't setup the syscall map the new 'perf
trace' codebase notices the augmented_raw_syscalls.o eBPF event, decides
to use it instead of the old raw_syscalls:sys_{enter,exit} method, but
then because we don't have the syscall map tries to set the tracepoint
filter on the sys_{enter,exit} evsels, that are NULL, segfaulting.

Make the code more robust by checking it those tracepoints have
their respective evsels in place before trying to set the tp filter.

With this we still get everything to work, just not setting up the
syscall filters, which is better than a segfault. Now to update the
precompiled augmented_raw_syscalls.o and continue development :-)

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-3ft5rjdl05wgz2pwpx2z8btu@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f76214f9
  27. 19 12月, 2018 11 次提交
    • A
      perf beauty mmap: Print mmap's 'offset' arg in hexadecimal · a6631340
      由 Arnaldo Carvalho de Melo 提交于 
      Also to make it match 'strace' output, for regression testing.

Both now produce this option, when 'perf trace' uses a .perfconfig
asking for the strace like output:

  mmap(0x7faf66e6a000, 1363968, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x22000) = 0x7faf66e6a000

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-27qhouo1kaac2iyl85nfnsf5@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a6631340
    • A
      perf trace beauty: Beautify arch_prctl()'s arguments · fb7068e7
      由 Arnaldo Carvalho de Melo 提交于 
      This actually so far, AFAIK is available only in x86, so the code was
put in place with x86 prefixes, in arches where it is not available it
will just not be called, so no further mechanisms are needed at this
time.

Later, when other arches wire this up, we'll just look at the uname
(live sessions) or perf_env data in the perf.data header to auto-wire
the right beautifier.

With this the output is the same as produced by 'strace' when used with
the following ~/.perfconfig:

  # cat ~/.perfconfig
  [llvm]
	dump-obj = true
  [trace]
	  add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
	  show_zeros = yes
	  show_duration = no
	  no_inherit = yes
	  show_timestamp = no
	  show_arg_names = no
	  args_alignment = -40
	  show_prefix = yes
  #

And, on fedora 29, since the string tables are generated from the kernel
sources, we don't know about 0x3001, just like strace:

  --- /tmp/strace 2018-12-17 11:22:08.707586721 -0300
  +++ /tmp/trace  2018-12-18 11:11:32.037512729 -0300
  @@ -1,49 +1,49 @@
  -arch_prctl(0x3001 /* ARCH_??? */, 0x7ffc8a92dc80) = -1 EINVAL (Invalid argument)
  +arch_prctl(0x3001 /* ARCH_??? */, 0x7ffe4eb93ae0) = -1 EINVAL (Invalid argument)
  -arch_prctl(ARCH_SET_FS, 0x7faf6700f540) = 0
  +arch_prctl(ARCH_SET_FS, 0x7fb507364540) = 0

And that seems to be related to the CET/Shadow Stack feature, that
userland in Fedora 29 (glibc 2.28) are querying the kernel about, that
0x3001 seems to be ARCH_CET_STATUS, I'll check the situation and test
with a fedora 29 kernel to see if the other codes are used.

A diff that ignores the different pointers for different runs needs to
be put in place in the upcoming regression tests comparing 'perf trace's
output to strace's.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-73a9prs8ktkrt97trtdmdjs8@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      fb7068e7
    • A
      perf trace: When showing string prefixes show prefix + ??? for unknown entries · 9614b8d6
      由 Arnaldo Carvalho de Melo 提交于 
      To match 'strace' output, like in:

  arch_prctl(0x3001 /* ARCH_??? */, 0x7ffc8a92dc80) = -1 EINVAL (Invalid argument)

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-kx59j2dk5l1x04ou57mt99ck@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      9614b8d6
    • A
      perf trace: Move strarrays to beauty.h for further reuse · 1f2d085e
      由 Arnaldo Carvalho de Melo 提交于 
      We'll use it in the upcoming arch_prctl() 'code' arg beautifier.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-6e4tj2fjen8qa73gy4u49vav@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      1f2d085e
    • A
      perf trace: Show NULL when syscall pointer args are 0 · ce05539f
      由 Arnaldo Carvalho de Melo 提交于 
      Matching strace's output format. The 'format' file for the syscall
tracepoints have an indication if the arg is a pointer, with some
exceptions like 'mmap' that has its first arg as an 'unsigned long', so
use a heuristic using the argument name, i.e. if it contains the 'addr'
substring, format it with the pointer formatter.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ddghemr8qrm6i0sb8awznbze@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ce05539f
    • A
      perf trace: Enclose the errno strings with () · 2c83dfae
      由 Arnaldo Carvalho de Melo 提交于 
      To match strace, now both emit the same line for calls like:

 access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-krxl6klsqc9qyktoaxyih942@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      2c83dfae
    • A
      perf trace: Add alignment spaces after the closing parens · 4b8a240e
      由 Arnaldo Carvalho de Melo 提交于 
      To use strace's style, helping in comparing the output of 'perf trace'
with the one from 'strace', to help in upcoming regression tests.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-mw6peotz4n84rga0fk78buff@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      4b8a240e
    • A
      perf trace: Allow asking for not suppressing common string prefixes · c65c83ff
      由 Arnaldo Carvalho de Melo 提交于 
      So far we've been suppressing common stuff such as "MAP_" in the mmap
flags, showing "SHARED" instead of "MAP_SHARED", allow for those
prefixes (and a few suffixes) to be shown:

  # trace -e *map,open*,*seek sleep 1
  openat("/etc/ld.so.cache", CLOEXEC) = 3
  mmap(0, 109093, READ, PRIVATE, 3, 0) = 0x7ff61c695000
  openat("/lib64/libc.so.6", CLOEXEC) = 3
  lseek(3, 792, SET) = 792
  mmap(0, 8192, READ|WRITE, PRIVATE|ANONYMOUS) = 0x7ff61c693000
  lseek(3, 792, SET) = 792
  lseek(3, 864, SET) = 864
  mmap(0, 1857568, READ, PRIVATE|DENYWRITE, 3, 0) = 0x7ff61c4cd000
  mmap(0x7ff61c4ef000, 1363968, EXEC|READ, PRIVATE|FIXED|DENYWRITE, 3, 139264) = 0x7ff61c4ef000
  mmap(0x7ff61c63c000, 311296, READ, PRIVATE|FIXED|DENYWRITE, 3, 1503232) = 0x7ff61c63c000
  mmap(0x7ff61c689000, 24576, READ|WRITE, PRIVATE|FIXED|DENYWRITE, 3, 1814528) = 0x7ff61c689000
  mmap(0x7ff61c68f000, 14368, READ|WRITE, PRIVATE|FIXED|ANONYMOUS) = 0x7ff61c68f000
  munmap(0x7ff61c695000, 109093) = 0
  openat("/usr/lib/locale/locale-archive", CLOEXEC) = 3
  mmap(0, 217749968, READ, PRIVATE, 3, 0) = 0x7ff60f523000
  #
  # vim ~/.perfconfig
  #
  # perf config
  llvm.dump-obj=true
  trace.add_events=/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
  trace.show_zeros=yes
  trace.show_duration=no
  trace.no_inherit=yes
  trace.show_timestamp=no
  trace.show_arg_names=no
  trace.args_alignment=0
  trace.string_quote="
  trace.show_prefix=yes
  #
  #
  # trace -e *map,open*,*seek sleep 1
  openat(AT_FDCWD, "/etc/ld.so.cache", O_CLOEXEC) = 3
  mmap(0, 109093, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f7ebbe59000
  openat(AT_FDCWD, "/lib64/libc.so.6", O_CLOEXEC) = 3
  lseek(3, 792, SEEK_SET) = 792
  mmap(0, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS) = 0x7f7ebbe57000
  lseek(3, 792, SEEK_SET) = 792
  lseek(3, 864, SEEK_SET) = 864
  mmap(0, 1857568, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f7ebbc91000
  mmap(0x7f7ebbcb3000, 1363968, PROT_EXEC|PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 139264) = 0x7f7ebbcb3000
  mmap(0x7f7ebbe00000, 311296, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 1503232) = 0x7f7ebbe00000
  mmap(0x7f7ebbe4d000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 1814528) = 0x7f7ebbe4d000
  mmap(0x7f7ebbe53000, 14368, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS) = 0x7f7ebbe53000
  munmap(0x7f7ebbe59000, 109093) = 0
  openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_CLOEXEC) = 3
  mmap(0, 217749968, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f7eaece7000
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-mtn1i4rjowjl72trtnbmvjd4@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      c65c83ff
    • A
      perf trace: Add a prefix member to the strarray class · 2e3d7fac
      由 Arnaldo Carvalho de Melo 提交于 
      So that the user, in an upcoming patch, can select printing it to get
the full string as used in the source code, not one with a common prefix
chopped off so as to make the output more compact.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zypczc88gzbmeqx7b372s138@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      2e3d7fac
    • A
      perf trace: Enclose strings with double quotes · 721f5326
      由 Arnaldo Carvalho de Melo 提交于 
      To match 'strace' output, helping with upcoming regression tests
comparing both outputs.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-jab52t1dcuh6vlztqle9g7u9@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      721f5326
    • A
      perf trace: Make the alignment of the syscall args be configurable · 9ed45d59
      由 Arnaldo Carvalho de Melo 提交于 
      Since the start 'perf trace' aligns the parens enclosing the list of
syscall args to align the syscall results, allow this to be
configurable, keeping the default of 70. Using:

  # perf config
  llvm.dump-obj=true
  trace.add_events=/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
  trace.show_zeros=yes
  trace.show_duration=no
  trace.no_inherit=yes
  trace.show_timestamp=no
  trace.show_arg_names=no
  trace.args_alignment=0
  # trace -e open*,close,*sleep sleep 1
  openat(CWD, /etc/ld.so.cache, CLOEXEC) = 3
  close(3) = 0
  openat(CWD, /lib64/libc.so.6, CLOEXEC) = 3
  close(3) = 0
  openat(CWD, /usr/lib/locale/locale-archive, CLOEXEC) = 3
  close(3) = 0
  nanosleep(0x7ffc00de66f0, 0) = 0
  close(1) = 0
  close(2) = 0
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-r8cbhoz1lr5npq9tutpvoigr@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      9ed45d59