- 13 7月, 2005 24 次提交
-
-
由 brian@murphy.dk 提交于
Export usb_get_intf and usb_put_intf so that modules can increase usb interface reference counts. Signed-off-by: brian@murphy.dk Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 david-b@pacbell.net 提交于
A patch re-organizing some parts of root hub initialization deleted the code initializing the bus-neutral reboot/shutdown notifier for OHCI. This patch just restores that deleted code. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 david-b@pacbell.net 提交于
The recent "pm_message_t" changes removed functionality from the Linux PM framework. This patch removes it from the OMAP OHCI too, removing the distinction between (previous) PM_SUSPEND_MEM and PM_SUSPEND_DISK state transitions ... now the only suspend semantics supportable are what was previously PM_SUSPEND_DISK (4) and is now "PMSG_SUSPEND" (3). From: Todd Poynor <tpoynor@mvista.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 david-b@pacbell.net 提交于
Minor OMAP updates that somehow got dropped from previous patches. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ian Campbell 提交于
I also needed the following on 2.6.13-rc1 without CONFIG_USB_ETH_RNDIS, symbol fs_status_desc isn't available in that case on PXA255. This builds both with and without ETH_RNDIS, but I haven't actually tested either. Signed-off-by: NIan Campbell <icampbell@arcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ian Campbell 提交于
Signed-off-by: NIan Campbell <icampbell@arcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Luca Risolia 提交于
SN9C10x driver updates. Changes: + new, - removed, * cleanup, @ bugfix @ Remove bad get_ctrl()'s * Documentation updates + Add 0x0c45/0x602d to the list of SN9C10x based devices + Add support for OV7630 image sensors Signed-off-by: NLuca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Michael Hund 提交于
below you will find one patch to hid-core.c, which lets usbhid ignore our HID devices. It would be nice, if you can apply it. Signed-off-by: NMichael Hund <mhund@ld-didactic.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 KAMBAROV, ZAUR 提交于
The length of the array desc->bitmap is 3, and not 4: Definitions involved: In drivers/usb/core/hcd.h 464 #define bitmap DeviceRemovable In drivers/usb/host/ohci-hub.c 395 struct usb_hub_descriptor *desc In drivers/usb/core/hub.h 130 struct usb_hub_descriptor { 131 __u8 bDescLength; 132 __u8 bDescriptorType; 133 __u8 bNbrPorts; 134 __u16 wHubCharacteristics; 135 __u8 bPwrOn2PwrGood; 136 __u8 bHubContrCurrent; 137 /* add 1 bit for hub status change; round to bytes */ 138 __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8]; 139 __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8]; 140 } __attribute__ ((packed)); In include/linux/usb.h 306 #define USB_MAXCHILDREN (16) This defect was found automatically by Coverity Prevent, a static analysis tool. (akpm: this code should be shot. Field `bitmap' doesn't exist in struct usb_hub_descriptor. And this .c file is #included in drivers/usb/host/ohci-hcd.c, and someone somewhere #defines `bitmap' to `DeviceRemovable'. >From a maintainability POV it would be better to memset the whole array beforehand - I changed the patch to do that) Signed-off-by: NZaur Kambarov <zkambarov@coverity.com> Cc: <linux-usb-devel@lists.sourceforge.net? Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Michael Downey 提交于
This driver is a basic keypress input driver for the Keyspan Digital Remote with part number UIA-11. Currently there is an older remote with part number UIA-10 which isn't supported by this driver. Support for the older UIA-10 could be added but a binary file is required to be download to the device, and I don't have that file. I also don't have a UIA-10 device so I wouldn't be able to test any of the changes. Signed-off-by: NMichael Downey <downey@zymeta.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Morton 提交于
drivers/usb/gadget/net2280.c: In function 'show_registers': drivers/usb/gadget/net2280.c:1501: warning: assignment discards qualifiers from pointer target type Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Olav Kongas 提交于
Greg, This patch fixes the kmalloc() flags argument type in USB subsystem; hopefully all of its occurences. The patch was made against patch-2.6.12-git2 from Jun 20. Cleanup of flags for kmalloc() in USB subsystem. Signed-off-by: NOlav Kongas <ok@artecdesign.ee> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Olav Kongas 提交于
Sorry that it took so long. Here comes a cleanup patch that addresses the remarks by Alexey Dobriyan about gregkh-usb-usb-isp116x-hcd-add.patch EXCEPT the remark about the typecasting of mem_flags argument for kcalloc; this will be addressed in a later patch. OlavCleanup of isp116x-hcd. Signed off by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
Make usbmon to print Setup packets of Control transfers. This is useful when debugging enumeration issues. This is a change to the trace format which is not fully compatible. A parser has to look at the data length word now. If that word is a character like 's', read setup packet before proceeding with data. I decided not to bump the API tag for this because not many such parsers exist at this point. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Thomas Winischhofer 提交于
although 2.6.12 now contains the sisusb driver, it failes to build this driver due to a missing patch of the Makefile. From: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Duncan Sands 提交于
We map states 0x00 and 0x10 to the ATM_PHY_SIG_LOST flag. The current logic fails to resync the line if we get state 0x10 followed by 0x00, since we only resync the line when the state is 0x00 and the flag changed. Doubly fixed by (1) always resyncing the line when the state is 0x00 even if the state didn't change, and (2) keeping track of the last state, not just the flag. We do (2) as well as (1) in order to get better log messages. This is a tweaked version of the original patch by Aurelio Arroyo. Signed-off-by: NDuncan Sands <baldrick@free.fr> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Duncan Sands 提交于
No functional change, but less likely to break in the future. Signed-off-by: NDuncan Sands <baldrick@free.fr> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Duncan Sands 提交于
Spotted by David Woodhouse. Signed-off-by: NDuncan Sands <baldrick@free.fr> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ian Abbott 提交于
ftdi_sio: Remove redundant handling of TIOCMBIS and TIOCMBIC ioctls as they are handled in the tty layer and never reach this driver. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ian Abbott 提交于
ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 akpm@osdl.org 提交于
Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Phil Dibowitz 提交于
This patch removes an unneeded subclass and protocol from the 07af/0005/100 entry in unsual_devs.h as reported by Alfred Ganz <alfred-ganz@agci.com>. Signed-off-by: NPhil Dibowitz <phil@ipom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
For some reason this was not there... Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 09 7月, 2005 1 次提交
-
-
由 David S. Miller 提交于
This is part of the grand scheme to eliminate the qlen member of skb_queue_head, and subsequently remove the 'list' member of sk_buff. Most users of skb_queue_len() want to know if the queue is empty or not, and that's trivially done with skb_queue_empty() which doesn't use the skb_queue_head->qlen member and instead uses the queue list emptyness as the test. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 7月, 2005 2 次提交
-
-
由 Dominik Brodowski 提交于
As a follow-up, remove the inclusion of pcmcia/version.h in many files. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
Move the "event handler" to struct pcmcia_driver -- the unified event handler will disappear really soon, but switching it to struct pcmcia_driver in the meantime allows for better "step-by-step" patches. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 6月, 2005 13 次提交
-
-
由 David Brownell 提交于
Catch up with some PCMCIA API changes: - Docs say that as of 2.6.11 the PCMCIA IRQInfo2 field is ignored, but it's not yet removed from the API; stop using it anyway. - As of 2.6.13 PCMCIA finally hotplugs and does driver binding without "cardmgr"; add a MODULE_DEVICE_TABLE to support this. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
This patch removes CONFIG_PMAC_PBOOK (PowerBook support). This is now split into CONFIG_PMAC_MEDIABAY for the actual hotswap bay that some powerbooks have, CONFIG_PM for power management related code, and just left out of any CONFIG_* option for some generally useful stuff that can be used on non-laptops as well. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alan Stern 提交于
This one-liner fixes a test for interfaces that are already resumed. It would be nice if this could get into 2.6.12, but it's not critical since it only affects people doing selective (runtime) suspend/resume. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This fixes a build error on pxa25x processes with pxa2xx_udc and CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set The error is because on that CPU there's no status transfer support except with RNDIS. Workaround, enable the RNDIS support too. Signed-off-by: NIan Campbell <icampbell@arcom.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
One debug message won't print the right value; OSDL bugid 4545. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthew Dharm 提交于
This patch started life as as527, and was rediffed by me. Since the IDE interface doesn't convey much information about types of errors, many USB-IDE adapters report all low-level errors with SK = 0x04, which is supposed to be used only for non-recoverable errors. As a result the SCSI midlayer doesn't retry the command. But quite often a retry would succeed, whereas an unnecessary retry doesn't really hurt anything. This patch uses a recently-implemented flag to tell the SCSI midlayer that such hardware errors should be retried. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthew Dharm 提交于
This patch causes a port reset whenever there's a transport error or abort. If that fails it reverts back to doing a mass-storage device reset. It started life as as497 and was rediffed by me. This makes error recovery a lot quicker and more reliable. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthew Dharm 提交于
This patch does two things to help reset recovery. It started life as as496 and was rediffed by me. First, the patch checks the result of a CLEAR_HALT request and doesn't reset the endpoint's data toggle unless the request succeeded. Second, it reduces the timeout for a device reset from 20 seconds to 5 seconds. If all goes well, then I've finally figured quilt out and this patch should apply cleanly. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Domen Puncer 提交于
up(&usblp->sem) was called twice in a row in this code path. Signed-off-by: NDomen Puncer <domen@coderock.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Vincent Vanackere 提交于
[PATCH] USB: fix atiremote input doesn`t register `device` & `driver` section in sysfs (/sys/class/input/event#) > On Sun, Apr 10, 2005 at 07:21:28PM +0600, Viktor A. Danilov wrote: > > > > PROBLEM: aiptek input doesn`t register `device` & `driver` section in sysfs (/sys/class/input/event#) > > REASON: `dev` - field not filled... > > SOLUTION: in linux/drivers/usb/input/aiptek.c write > > aiptek->inputdev.dev = &intf->dev; > > before calling > > input_register_device(&aiptek->inputdev); The following (tested) patch fixes the exact same issue with the ATI Remote input driver. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kiril Jovchev 提交于
Added support for Creative WebCam Go Mini. Camera has STV680 chip and just different Product ID(0x4007) and Vendor ID (0x041e). Signed-off-by: NKiril Jovchev <jovchev@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 C. Adam Oldham 提交于
Initialize status fields in the read and write urbs to prevent a race condition with open/read/close - open/write/close sequences. Fixes bug #4432 at bugzilla.kernel.org Signed-off-by: NAdam Oldham <oldhamca@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
The itd_patch() function is responsible for allocating entries in the buffer page pointer list of the iTD. Particularly, a new page pointer is needed every time when buffer data crosses a page boundary. However, there is a bug in the allocation logic: the function does not allocate a new entry when the current transaction is the first transaction in the iTD (as indicated by first!=0). The consequence is that, when the data of the first transaction begins somewhere at the end of a page so that it actually does cross the page boundary, no new page pointer is allocated. This means that the data at the end of the first transaction (beyond the page boundary) will be accessed by the HC using the second page pointer, which is zero. Furthermore, the first page pointer will be later overwritten by the page pointers of the other transactions, which will garble it because the value is or-ed into the iTD field. All this particular check (for !first) does is cause incorrect behaviour, so it should be entirely removed (and with it the variable first that is not used for anything else). Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-