* 'writeback' of git://git.kernel.dk/linux-2.6-block:
  writeback: fix possible bdi writeback refcounting problem
  writeback: Fix bdi use after free in wb_work_complete()
  writeback: improve scalability of bdi writeback work queues
  writeback: remove smp_mb(), it's not needed with list_add_tail_rcu()
  writeback: use schedule_timeout_interruptible()
  writeback: add comments to bdi_work structure
  writeback: splice dirty inode entries to default bdi on bdi_destroy()
  writeback: separate starting of sync vs opportunistic writeback
  writeback: inline allocation failure handling in bdi_alloc_queue_work()
  writeback: use RCU to protect bdi_list
  writeback: only use bdi_writeback_all() for WB_SYNC_NONE writeout
  fs: Assign bdi in super_block
  writeback: make wb_writeback() take an argument structure
  writeback: merely wakeup flusher thread if work allocation fails for WB_SYNC_NONE
  writeback: get rid of wbc->for_writepages
  fs: remove bdev->bd_inode_backing_dev_info

wb_clear_pending AFAIKS should not be called after the item has been
put on the list, except by the worker threads. It could lead to the
situation where the refcount is decremented below 0 and cause lots of
problems.

Presumably the !wb_has_dirty_io case is not a common one, so it can
be discovered when the thread wakes up to check?

Also add a comment in bdi_work_clear.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

By the time bdi_work_on_stack gets evaluated again in bdi_work_free, it
can already have been deallocated and used for something else in the
!on stack case, giving a false positive in this test and causing
corruption.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

If you're going to do an atomic RMW on each list entry, there's not much
point in all the RCU complexities of the list walking. This is only going
to help the multi-thread case I guess, but it doesn't hurt to do now.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

list_add_tail_rcu contains required barriers.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Gets rid of a manual set_current_state().
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

And document its retriever, get_next_work_item().
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

We cannot safely ensure that the inodes are all gone at this point
in time, and we must not destroy this bdi with inodes having off it.
So just splice our entries to the default bdi since that one will
always persist.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

bdi_start_writeback() is currently split into two paths, one for
WB_SYNC_NONE and one for WB_SYNC_ALL. Add bdi_sync_writeback()
for WB_SYNC_ALL writeback and let bdi_start_writeback() handle
only WB_SYNC_NONE.

Push down the writeback_control allocation and only accept the
parameters that make sense for each function. This cleans up
the API considerably.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This gets rid of work == NULL in bdi_queue_work() and puts the
OOM handling where it belongs.
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Now that bdi_writeback_all() no longer handles integrity writeback,
it doesn't have to block anymore. This means that we can switch
bdi_list reader side protection to RCU.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Data integrity writeback must use bdi_start_writeback() and ensure
that wbc->sb and wbc->bdi are set.
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

We do this automatically in get_sb_bdev() from the set_bdev_super()
callback. Filesystems that have their own private backing_dev_info
must assign that in ->fill_super().

Note that ->s_bdi assignment is required for proper writeback!
Acked-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

We need to be able to pass in range_cyclic as well, so instead
of growing yet another argument, split the arguments into a
struct wb_writeback_args structure that we can use internally.
Also makes it easier to just copy all members to an on-stack
struct, since we can't access work after clearing the pending
bit.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Since it's an opportunistic writeback and not a data integrity action,
don't punt to blocking writeback. Just wakeup the thread and it will
flush old data.
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

It's only set, it's never checked. Kill it.
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

It has been unused since it was introduced in:

commit 520808bf20e90fdbdb320264ba7dd5cf9d47dcac
Author: Andrew Morton <akpm@osdl.org>
Date:   Fri May 21 00:46:17 2004 -0700

    [PATCH] block device layer: separate backing_dev_info infrastructure

So lets just kill it.
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This build bug:

 mm/slub.c: In function 'kmem_cache_open':
 mm/slub.c:2476: error: 'disable_higher_order_debug' undeclared (first use in this function)
 mm/slub.c:2476: error: (Each undeclared identifier is reported only once
 mm/slub.c:2476: error: for each function it appears in.)

Triggers because there's no !CONFIG_SLUB_DEBUG definition for
disable_higher_order_debug.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6:
  ide: fixup for fujitsu disk
  ide: convert to ->proc_fops
  at91_ide: remove headers specific for at91sam9263
  IDE: palm_bk3710: convert clock usage after clkdev conversion
  ide: fix races in handling of user-space SET XFER commands
  ide: allow ide_dev_read_id() to be called from the IRQ context
  ide: ide-taskfile.c fix style problems
  drivers/ide/ide-cd.c: Use DIV_ROUND_CLOSEST
  ide-tape: fix handling of postponed rqs
  ide-tape: convert to ide_debug_log macro
  ide-tape: fix debug call
  ide: Fix annoying warning in ide_pio_bytes().
  IDE: Save a call to PageHighMem()

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (134 commits)
  powerpc/nvram: Enable use Generic NVRAM driver for different size chips
  powerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdline
  powerpc/ps3: Workaround for flash memory I/O error
  powerpc/booke: Don't set DABR on 64-bit BookE, use DAC1 instead
  powerpc/perf_counters: Reduce stack usage of power_check_constraints
  powerpc: Fix bug where perf_counters breaks oprofile
  powerpc/85xx: Fix SMP compile error and allow NULL for smp_ops
  powerpc/irq: Improve nanodoc
  powerpc: Fix some late PowerMac G5 with PCIe ATI graphics
  powerpc/fsl-booke: Use HW PTE format if CONFIG_PTE_64BIT
  powerpc/book3e: Add missing page sizes
  powerpc/pseries: Fix to handle slb resize across migration
  powerpc/powermac: Thermal control turns system off too eagerly
  powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan()
  powerpc/405ex: support cuImage via included dtb
  powerpc/405ex: provide necessary fixup function to support cuImage
  powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC
  powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support.
  powerpc/44x: Update Arches defconfig
  powerpc/44x: Update Arches dts
  ...

Fix up conflicts in drivers/char/agp/uninorth-agp.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits)
  powerpc64: convert to dynamic percpu allocator
  sparc64: use embedding percpu first chunk allocator
  percpu: kill lpage first chunk allocator
  x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA
  percpu: update embedding first chunk allocator to handle sparse units
  percpu: use group information to allocate vmap areas sparsely
  vmalloc: implement pcpu_get_vm_areas()
  vmalloc: separate out insert_vmalloc_vm()
  percpu: add chunk->base_addr
  percpu: add pcpu_unit_offsets[]
  percpu: introduce pcpu_alloc_info and pcpu_group_info
  percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward
  percpu: add @align to pcpu_fc_alloc_fn_t
  percpu: make @dyn_size mandatory for pcpu_setup_first_chunk()
  percpu: drop @static_size from first chunk allocators
  percpu: generalize first chunk allocator selection
  percpu: build first chunk allocators selectively
  percpu: rename 4k first chunk allocator to page
  percpu: improve boot messages
  percpu: fix pcpu_reclaim() locking
  ...

Fix trivial conflict as by Tejun Heo in kernel/sched.c

Due to problems at cam.org, my nico@cam.org email address is no longer
valid.  FRom now on, nico@fluxnic.net should be used instead.
Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf_counter: Fix buffer overflow in perf_copy_attr()

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (213 commits)
  V4L/DVB (12720): em28xx-cards: Add vendor/product id for Kworld DVD Maker 2
  V4L/DVB (12713): em28xx: Cleanups at ir_i2c handler
  V4L/DVB (12712): em28xx: properly load ir-kbd-i2c when needed
  V4L/DVB (12701): saa7134: ir-kbd-i2c init data needs a persistent object
  V4L/DVB (12699): cx18: ir-kbd-i2c initialization data should point to a persistent object
  V4L/DVB (12698): em28xx: ir-kbd-i2c init data needs a persistent object
  V4L/DVB (12707): gspca - sn9c20x: Add SXGA support to MT9M111
  V4L/DVB (12706): gspca - sn9c20x: disable exposure/gain controls for MT9M111 sensors.
  V4L/DVB (12705): gspca - sn9c20x: Add SXGA support to SOI968
  V4L/DVB (12703): gspca - sn9c20x: Reduces size of object
  V4L/DVB (12704): gspca - sn9c20x: Fix exposure on SOI968 sensors
  V4L/DVB (12696): gspca - sonixj / sn9c102: Two drivers for 0c45:60fc and 0c45:613e.
  V4L/DVB (12695): gspca - vc032x: Do the LED work with the sensor hv7131r.
  V4L/DVB (12694): gspca - vc032x: Change the start exchanges of the sensor hv7131r.
  V4L/DVB (12693): gspca - sunplus: The brightness is signed.
  V4L/DVB (12692): gspca - sunplus: Optimize code.
  V4L/DVB (12691): gspca - sonixj: Don't use mdelay().
  V4L/DVB (12690): gspca - pac7311: Webcam 06f8:3009 added.
  V4L/DVB (12686): dvb-core: check supported QAM modulations
  V4L/DVB (12685): dvb-core: check fe->ops.set_frontend return value
  ...

* 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, pat: Fix cacheflush address in change_page_attr_set_clr()
  mm: remove !NUMA condition from PAGEFLAGS_EXTENDED condition set
  x86: Fix earlyprintk=dbgp for machines without NX
  x86, pat: Sanity check remap_pfn_range for RAM region
  x86, pat: Lookup the protection from memtype list on vm_insert_pfn()
  x86, pat: Add lookup_memtype to get the current memtype of a paddr
  x86, pat: Use page flags to track memtypes of RAM pages
  x86, pat: Generalize the use of page flag PG_uncached
  x86, pat: Add rbtree to do quick lookup in memtype tracking
  x86, pat: Add PAT reserve free to io_mapping* APIs
  x86, pat: New i/f for driver to request memtype for IO regions
  x86, pat: ioremap to follow same PAT restrictions as other PAT users
  x86, pat: Keep identity maps consistent with mmaps even when pat_disabled
  x86, mtrr: make mtrr_aps_delayed_init static bool
  x86, pat/mtrr: Rendezvous all the cpus for MTRR/PAT init
  generic-ipi: Allow cpus not yet online to call smp_call_function with irqs disabled
  x86: Fix an incorrect argument of reserve_bootmem()
  x86: Fix system crash when loading with "reservetop" parameter

* 'x86-txt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, intel_txt: clean up the impact on generic code, unbreak non-x86
  x86, intel_txt: Handle ACPI_SLEEP without X86_TRAMPOLINE
  x86, intel_txt: Fix typos in Kconfig help
  x86, intel_txt: Factor out the code for S3 setup
  x86, intel_txt: tboot.c needs <asm/fixmap.h>
  intel_txt: Force IOMMU on for Intel TXT launch
  x86, intel_txt: Intel TXT Sx shutdown support
  x86, intel_txt: Intel TXT reboot/halt shutdown support
  x86, intel_txt: Intel TXT boot support

* 'agp-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
  agp/intel: remove restore in resume
  agp: fix uninorth build
  intel-agp: Set dma mask for i915
  agp: kill phys_to_gart() and gart_to_phys()
  intel-agp: fix sglist allocation to avoid vmalloc()
  intel-agp: Move repeated sglist free into separate function
  agp: Switch agp_{un,}map_page() to take struct page * argument
  agp: tidy up handling of scratch pages w.r.t. DMA API
  intel_agp: Use PCI DMA API correctly on chipsets new enough to have IOMMU
  agp: Add generic support for graphics dma remapping
  agp: Switch mask_memory() method to take address argument again, not page

This patch will fix the following problem on Yeeloong netbook with
fujitsu disk.

irq 14: nobody cared (try booting with the "irqpoll" option)
Call Trace:
[<ffffffff8020d438>] dump_stack+0x8/0x40
[<ffffffff8027ec64>] __report_bad_irq+0x58/0xe4
[<ffffffff8027ee6c>] note_interrupt+0x17c/0x23c
[<ffffffff8027f9b8>] handle_level_irq+0xcc/0x134
[<ffffffff802125b0>] mach_irq_dispatch+0xb8/0x1e0
[<ffffffff8020041c>] ret_from_irq+0x0/0x4
[<ffffffff8029e678>] free_hot_cold_page+0x224/0x2a0
[<ffffffff8026f794>] swsusp_free+0xb0/0x14c
[<ffffffff8026ec08>] hibernate+0x198/0x218
[<ffffffff8026cfa8>] state_store+0x90/0x138
[<ffffffff8032b5a4>] sysfs_write_file+0x130/0x194
[<ffffffff802c94fc>] vfs_write+0xb8/0x180
[<ffffffff802c96b8>] SyS_write+0x50/0x98
[<ffffffff80203fd8>] handle_sys+0x158/0x174

handlers:
[<ffffffff80429670>] (ide_intr+0x0/0x300)
Disabling IRQ #14

References:

1. commit 1fde02e7146d4a1bab80fd1506f9018fe71e8521 of
git://dev.lemote.com/linux_loongson.git
2. 8bc1e5aa (ide: respect quirk_drives[]
list on all controllers)
Signed-off-by: NYan Hua <yanh@lemote.com>
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If we pass a big size data over perf_counter_open() syscall,
the kernel will copy this data to a small buffer, it will
cause kernel crash.

This bug makes the kernel unsafe and non-root local user can
trigger it.
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NPaul Mackerras <paulus@samba.org>
Cc: <stable@kernel.org>
LKML-Reference: <4AAF37D4.5010706@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge branch 'for-linus3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  SELinux: inline selinux_is_enabled in !CONFIG_SECURITY_SELINUX
  KEYS: Fix garbage collector
  KEYS: Unlock tasklist when exiting early from keyctl_session_to_parent
  CRED: Allow put_cred() to cope with a NULL groups list
  SELinux: flush the avc before disabling SELinux
  SELinux: seperate avc_cache flushing
  Creds: creds->security can be NULL is selinux is disabled

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: (23 commits)
  at_hdmac: Rework suspend_late()/resume_early()
  PM: Reset transition_started at dpm_resume_noirq
  PM: Update kerneldoc comments in drivers/base/power/main.c
  PM: Add convenience macro to make switching to dev_pm_ops less error-prone
  hp-wmi: Switch driver to dev_pm_ops
  floppy: Switch driver to dev_pm_ops
  PM: Trivial fixes
  PM / Hibernate / Memory hotplug: Always use for_each_populated_zone()
  PM/Hibernate: Do not try to allocate too much memory too hard (rev. 2)
  PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
  PM/Hibernate: Rework shrinking of memory
  PM: Fix typo in label name s/Platofrm_finish/Platform_finish/
  PM: Run-time PM platform device bus support
  PM: Introduce core framework for run-time PM of I/O devices (rev. 17)
  Driver Core: Make PM operations a const pointer
  PM: Remove platform device suspend_late()/resume_early() V2
  USB: Rework musb suspend()/resume_early()
  I2C: Rework i2c-s3c2410 suspend_late()/resume() V2
  I2C: Rework i2c-pxa suspend_late()/resume_early()
  DMA: Rework txx9dmac suspend_late()/resume_early()
  ...

Fix trivial conflict in drivers/base/platform.c (due to same
constification patch being merged in both sides, along with some other
PM work in the PM branch)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig:
  kconfig: add missing dependency of conf to localyesconfig
  kconfig: test if a .config already exists
  kconfig: make local .config default for streamline_config
  kconfig: test for /boot/config-uname after /proc/config.gz in localconfig
  kconfig: unset IKCONFIG_PROC and clean up nesting
  kconfig: search for a config to base the local(mod|yes)config on
  kconfig: keep config.gz around even if CONFIG_IKCONFIG_PROC is not set
  kconfig: have extract-ikconfig read ELF files
  kconfig: add check if end exists in extract-ikconfig
  kconfig: enable CONFIG_IKCONFIG from streamline_config.pl
  kconfig: do not warn about modules built in
  kconfig: streamline_config.pl do not stop with no depends
  kconfig: add make localyesconfig option
  kconfig: make localmodconfig to run streamline_config.pl
  kconfig: add streamline_config.pl to scripts

Added Kworld DVD Maker 2
Thanks to C Western <l@c-m-w.me.uk> for reporting this board.
Signed-off-by: NDouglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Without this patch building a kernel emits millions of warning like:

include/linux/selinux.h:92: warning: ?selinux_is_enabled? defined but not used

When it is build without CONFIG_SECURITY_SELINUX.  This is harmless, but
the function should be inlined, so it gets compiled out.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

* pcpu_chunk_page_occupied() doesn't exist in for-next.
* pcpu_chunk_addr_search() updated to use raw_smp_processor_id().

Conflicts:
	mm/percpu.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (52 commits)
  Input: bcm5974 - silence uninitialized variables warnings
  Input: wistron_btns - add keymap for AOpen 1557
  Input: psmouse - use boolean type
  Input: i8042 - use platform_driver_probe
  Input: i8042 - use boolean type where it makes sense
  Input: i8042 - try disabling and re-enabling AUX port at close
  Input: pxa27x_keypad - allow modifying keymap from userspace
  Input: sunkbd - fix formatting
  Input: i8042 - bypass AUX IRQ delivery test on laptops
  Input: wacom_w8001 - simplify querying logic
  Input: atkbd - allow setting force-release bitmap via sysfs
  Input: w90p910_keypad - move a dereference below a NULL test
  Input: add twl4030_keypad driver
  Input: matrix-keypad - add function to build device keymap
  Input: tosakbd - fix cleaning up KEY_STROBEs after error
  Input: joydev - validate axis/button maps before clobbering current ones
  Input: xpad - add USB ID for the drumkit controller from Rock Band
  Input: w90p910_keypad - rename driver name to match platform
  Input: add new driver for Sentelic Finger Sensing Pad
  Input: psmouse - allow defining read-only attributes
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: completely remove apple mightymouse from blacklist
  HID: support larger reports than 64 bytes in hiddev
  HID: local function should be static
  HID: ignore Philips IEEE802.15.4 RF Dongle
  HID: ignore all recent SoundGraph iMON devices
  HID: fix memory leak on error patch in debug code
  HID: fix overrun in quirks initialization
  HID: Drop NULL test on list_entry result
  HID: driver for Twinhan USB 6253:0100 remote control
  HID: adding __init/__exit macros to module init/exit functions
  HID: add rumble support for Thrustmaster Dual Trigger 3-in-1
  HID: ntrig tool separation and pen usages
  HID: Avoid double spin_lock_init on usbhid->lock
  HID: add force feedback support for Logitech WingMan Formula Force GP
  HID: Support new variants of Samsung USB IR receiver (0419:0001)
  HID: fix memory leak on error path in debug code
  HID: fix debugfs build with !CONFIG_DEBUG_FS
  HID: use debugfs for events/reports dumping
  HID: use debugfs for report dumping descriptor

* 'for-2.6.32' of git://git.kernel.dk/linux-2.6-block: (29 commits)
  block: use blkdev_issue_discard in blk_ioctl_discard
  Make DISCARD_BARRIER and DISCARD_NOBARRIER writes instead of reads
  block: don't assume device has a request list backing in nr_requests store
  block: Optimal I/O limit wrapper
  cfq: choose a new next_req when a request is dispatched
  Seperate read and write statistics of in_flight requests
  aoe: end barrier bios with EOPNOTSUPP
  block: trace bio queueing trial only when it occurs
  block: enable rq CPU completion affinity by default
  cfq: fix the log message after dispatched a request
  block: use printk_once
  cciss: memory leak in cciss_init_one()
  splice: update mtime and atime on files
  block: make blk_iopoll_prep_sched() follow normal 0/1 return convention
  cfq-iosched: get rid of must_alloc flag
  block: use interrupts disabled version of raise_softirq_irqoff()
  block: fix comment in blk-iopoll.c
  block: adjust default budget for blk-iopoll
  block: fix long lines in block/blk-iopoll.c
  block: add blk-iopoll, a NAPI like approach for block devices
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (209 commits)
  [SCSI] fix oops during scsi scanning
  [SCSI] libsrp: fix memory leak in srp_ring_free()
  [SCSI] libiscsi, bnx2i: make bound ep check common
  [SCSI] libiscsi: add completion function for drivers that do not need pdu processing
  [SCSI] scsi_dh_rdac: changes for rdac debug logging
  [SCSI] scsi_dh_rdac: changes to collect the rdac debug information during the initialization
  [SCSI] scsi_dh_rdac: move the init code from rdac_activate to rdac_bus_attach
  [SCSI] sg: fix oops in the error path in sg_build_indirect()
  [SCSI] mptsas : Bump version to 3.04.12
  [SCSI] mptsas : FW event thread and scsi mid layer deadlock in SYNCHRONIZE CACHE command
  [SCSI] mptsas : Send DID_NO_CONNECT for pending IOs of removed device
  [SCSI] mptsas : PAE Kernel more than 4 GB kernel panic
  [SCSI] mptsas : NULL pointer on big endian systems causing Expander not to tear off
  [SCSI] mptsas : Sanity check for phyinfo is added
  [SCSI] scsi_dh_rdac: Add support for Sun StorageTek ST2500, ST2510 and ST2530
  [SCSI] pmcraid: PMC-Sierra MaxRAID driver to support 6Gb/s SAS RAID controller
  [SCSI] qla2xxx: Update version number to 8.03.01-k6.
  [SCSI] qla2xxx: Properly delete rports attached to a vport.
  [SCSI] qla2xxx: Correct various NPIV issues.
  [SCSI] qla2xxx: Correct qla2x00_eh_wait_on_command() to wait correctly.
  ...

* 'docs-next' of git://git.lwn.net/linux-2.6:
  Document the flex_array library.
  Doc: seq_file.txt fix wrong dd command example.