Add new instruction for the nf_tables VM that allows us to specify what
flows are offloaded into a given flow table via name. This new
instruction creates the flow entry and adds it to the flow table.

Only established flows, ie. we have seen traffic in both directions, are
added to the flow table. You can still decide to offload entries at a
later stage via packet counting or checking the ct status in case you
want to offload assured conntracks.

This new extension depends on the conntrack subsystem.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch adds the IPv6 flow table type, that implements the datapath
flow table to forward IPv6 traffic.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch adds the IPv6 flow table type, that implements the datapath
flow table to forward IPv6 traffic.

This patch exports ip6_dst_mtu_forward() that is required to check for
mtu to pass up packets that need PMTUD handling to the classic
forwarding path.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch adds the IPv4 flow table type, that implements the datapath
flow table to forward IPv4 traffic. Rationale is:

1) Look up for the packet in the flow table, from the ingress hook.
2) If there's a hit, decrement ttl and pass it on to the neighbour layer
   for transmission.
3) If there's a miss, packet is passed up to the classic forwarding
   path.

This patch also supports layer 3 source and destination NAT.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch defines the API to interact with flow tables, this allows to
add, delete and lookup for entries in the flow table. This also adds the
generic garbage code that removes entries that have expired, ie. no
traffic has been seen for a while.

Users of the flow table infrastructure can delete entries via
flow_offload_dead(), which sets the dying bit, this signals the garbage
collector to release an entry from user context.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch introduces a netlink control plane to create, delete and dump
flow tables. Flow tables are identified by name, this name is used from
rules to refer to an specific flow table. Flow tables use the rhashtable
class and a generic garbage collector to remove expired entries.

This also adds the infrastructure to add different flow table types, so
we can add one for each layer 3 protocol family.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This new bit tells us that the conntrack entry is owned by the flow
table offload infrastructure.

 # cat /proc/net/nf_conntrack
 ipv4     2 tcp      6 src=10.141.10.2 dst=147.75.205.195 sport=36392 dport=443 src=147.75.205.195 dst=192.168.2.195 sport=443 dport=36392 [OFFLOAD] mark=0 zone=0 use=2

Note the [OFFLOAD] tag in the listing.

The timer of such conntrack entries look like stopped from userspace.
In practise, to make sure the conntrack entry does not go away, the
conntrack timer is periodically set to an arbitrary large value that
gets refreshed on every iteration from the garbage collector, so it
never expires- and they display no internal state in the case of TCP
flows. This allows us to save a bitcheck from the packet path via
nf_ct_is_expired().

Conntrack entries that have been offloaded to the flow table
infrastructure cannot be deleted/flushed via ctnetlink. The flow table
infrastructure is also responsible for releasing this conntrack entry.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This macro is unnecessary, it just hides details for one single caller.
nfnl_dereference() is just enough.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Users cannot forge malformed IPv4/IPv6 headers via raw sockets that they
can inject into the stack. Specifically, not for IPv4 since 55888dfb
("AF_RAW: Augment raw_send_hdrinc to expand skb to fit iphdr->ihl
(v2)"). IPv6 raw sockets also ensure that packets have a well-formed
IPv6 header available in the skbuff.

At quick glance, br_netfilter also validates layer 3 headers and it
drops malformed both IPv4 and IPv6 packets.

Therefore, let's remove this defensive check all over the place.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

replacement for iptables "-m policy --dir in --policy {ipsec,none}".
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This abstraction has no clients anymore, remove it.

This is what remains from previous authors, so correct copyright
statement after recent modifications and code removal.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This is only needed by nf_queue, place this code where it belongs.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

We cannot make a direct call to nf_ip6_reroute() because that would result
in autoloading the 'ipv6' module because of symbol dependencies.
Therefore, define reroute indirection in nf_ipv6_ops where this really
belongs to.

For IPv4, we can indeed make a direct function call, which is faster,
given IPv4 is built-in in the networking code by default. Still,
CONFIG_INET=n and CONFIG_NETFILTER=y is possible, so define empty inline
stub for IPv4 in such case.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

We cannot make a direct call to nf_ip6_route() because that would result
in autoloading the 'ipv6' module because of symbol dependencies.
Therefore, define route indirection in nf_ipv6_ops where this really
belongs to.

For IPv4, we can indeed make a direct function call, which is faster,
given IPv4 is built-in in the networking code by default. Still,
CONFIG_INET=n and CONFIG_NETFILTER=y is possible, so define empty inline
stub for IPv4 in such case.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This is only used by nf_queue.c and this function comes with no symbol
dependencies with IPv6, it just refers to structure layouts. Therefore,
we can replace it by a direct function call from where it belongs.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

We cannot make a direct call to nf_ip6_checksum_partial() because that
would result in autoloading the 'ipv6' module because of symbol
dependencies.  Therefore, define checksum_partial indirection in
nf_ipv6_ops where this really belongs to.

For IPv4, we can indeed make a direct function call, which is faster,
given IPv4 is built-in in the networking code by default. Still,
CONFIG_INET=n and CONFIG_NETFILTER=y is possible, so define empty inline
stub for IPv4 in such case.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

We cannot make a direct call to nf_ip6_checksum() because that would
result in autoloading the 'ipv6' module because of symbol dependencies.
Therefore, define checksum indirection in nf_ipv6_ops where this really
belongs to.

For IPv4, we can indeed make a direct function call, which is faster,
given IPv4 is built-in in the networking code by default. Still,
CONFIG_INET=n and CONFIG_NETFILTER=y is possible, so define empty inline
stub for IPv4 in such case.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This allows to reuse xt_connlimit infrastructure from nf_tables.
The upcoming nf_tables frontend can just pass in an nftables register
as input key, this allows limiting by any nft-supported key, including
concatenations.

For xt_connlimit, pass in the zone and the ip/ipv6 address.

With help from Yi-Hung Wei.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NYi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

They don't belong to the family definition, move them to the filter
chain type definition instead.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Since NFPROTO_INET is handled from the core, we don't need to maintain
extra infrastructure in nf_tables to handle the double hook
registration, one for IPv4 and another for IPv6.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Use new native NFPROTO_INET support in netfilter core, this gets rid of
ad-hoc code in the nf_tables API codebase.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Expand NFPROTO_INET in two hook registrations, one for NFPROTO_IPV4 and
another for NFPROTO_IPV6. Hence, we handle NFPROTO_INET from the core.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

So static_key_slow_dec applies to the family behind NFPROTO_INET.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Instead of passing struct nf_hook_ops, this is needed by follow up
patches to handle NFPROTO_INET from the core.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Just a cleanup, __nf_unregister_net_hook() is used by a follow up patch
when handling NFPROTO_INET as a real family from the core.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Add helper function to test for the NFT_SET_ANONYMOUS flag.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Instead of calling this function from the family specific variant, this
reduces the code size in the fast path for the netdev, bridge and inet
families. After this change, we must call nft_set_pktinfo() upfront from
the chain hook indirection.

Before:

   text    data     bss     dec     hex filename
   2145     208       0    2353     931 net/netfilter/nf_tables_netdev.o

After:

   text    data     bss     dec     hex filename
   2125     208       0    2333     91d net/netfilter/nf_tables_netdev.o
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

46928a0b49f3 ("netfilter: nf_tables: remove multihook chains and
families") already removed this, this is a leftover.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

No problem for iptables as priorities are fixed values defined in the
nat modules, but in nftables the priority its coming from userspace.

Reject in case we see that such a hook would not work.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The netfilter NAT core cannot deal with more than one NAT hook per hook
location (prerouting, input ...), because the NAT hooks install a NAT null
binding in case the iptables nat table (iptable_nat hooks) or the
corresponding nftables chain (nft nat hooks) doesn't specify a nat
transformation.

Null bindings are needed to detect port collsisions between NAT-ed and
non-NAT-ed connections.

This causes nftables NAT rules to not work when iptable_nat module is
loaded, and vice versa because nat binding has already been attached
when the second nat hook is consulted.

The netfilter core is not really the correct location to handle this
(hooks are just hooks, the core has no notion of what kinds of side
 effects a hook implements), but its the only place where we can check
for conflicts between both iptables hooks and nftables hooks without
adding dependencies.

So add nat annotation to hook_ops to describe those hooks that will
add NAT bindings and then make core reject if such a hook already exists.
The annotation fills a padding hole, in case further restrictions appar
we might change this to a 'u8 type' instead of bool.

iptables error if nft nat hook active:
iptables -t nat -A POSTROUTING -j MASQUERADE
iptables v1.4.21: can't initialize iptables table `nat': File exists
Perhaps iptables or your kernel needs to be upgraded.

nftables error if iptables nat table present:
nft -f /etc/nftables/ipv4-nat
/usr/etc/nftables/ipv4-nat:3:1-2: Error: Could not process rule: File exists
table nat {
^^
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

currently we always return -ENOENT to userspace if we can't find
a particular table, or if the table initialization fails.

Followup patch will make nat table init fail in case nftables already
registered a nat hook so this change makes xt_find_table_lock return
an ERR_PTR to return the errno value reported from the table init
function.

Add xt_request_find_table_lock as try_then_request_module replacement
and use it where needed.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This can be same as NF_INET_NUMHOOKS if we don't support DECNET.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

no need to define hook points if the family isn't supported.
Because we need these hooks for either nftables, arp/ebtables
or the 'call-iptables' hack we have in the bridge layer add two
new dependencies, NETFILTER_FAMILY_{ARP,BRIDGE}, and have the
users select them.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

no need to define hook points if the family isn't supported.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Not all families share the same hook count, adjust sizes to what is
needed.

struct net before:
/* size: 6592, cachelines: 103, members: 46 */
after:
/* size: 5952, cachelines: 93, members: 46 */
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The kernel already has defines for this, but they are in uapi exposed
headers.

Including these from netns.h causes build errors and also adds unneeded
dependencies on heads that we don't need.

So move these defines to netfilter_defs.h and place the uapi ones
in ifndef __KERNEL__ to keep them for userspace.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

struct net contains:

struct nf_hook_entries __rcu *hooks[NFPROTO_NUMPROTO][NF_MAX_HOOKS];

which store the hook entry point locations for the various protocol
families and the hooks.

Using array results in compact c code when doing accesses, i.e.
  x = rcu_dereference(net->nf.hooks[pf][hook]);

but its also wasting a lot of memory, as most families are
not used.

So split the array into those families that are used, which
are only 5 (instead of 13).  In most cases, the 'pf' argument is
constant, i.e. gcc removes switch statement.

struct net before:
 /* size: 5184, cachelines: 81, members: 46 */
after:
 /* size: 4672, cachelines: 73, members: 46 */
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Giuseppe Scrivano says:
  "SELinux, if enabled, registers for each new network namespace 6
    netfilter hooks."

Cost for this is high.  With synchronize_net() removed:
   "The net benefit on an SMP machine with two cores is that creating a
   new network namespace takes -40% of the original time."

This patch replaces synchronize_net+kvfree with call_rcu().
We store rcu_head at the tail of a structure that has no fixed layout,
i.e. we cannot use offsetof() to compute the start of the original
allocation.  Thus store this information right after the rcu head.

We could simplify this by just placing the rcu_head at the start
of struct nf_hook_entries.  However, this structure is used in
packet processing hotpath, so only place what is needed for that
at the beginning of the struct.
Reported-by: NGiuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

since commit 960632ec ("netfilter: convert hook list to an array")
nfqueue no longer stores a pointer to the hook that caused the packet
to be queued.  Therefore no extra synchronize_net() call is needed after
dropping the packets enqueued by the old rule blob.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This reverts commit d3ad2c17
("netfilter: core: batch nf_unregister_net_hooks synchronize_net calls").

Nothing wrong with it.  However, followup patch will delay freeing of hooks
with call_rcu, so all synchronize_net() calls become obsolete and there
is no need anymore for this batching.

This revert causes a temporary performance degradation when destroying
network namespace, but its resolved with the upcoming call_rcu conversion.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>