SLAB_RECLAIM_ACCOUNT is a permanent attribute of a slab cache.  Set
__GFP_RECLAIMABLE as part of its ->allocflags rather than check the
cachep flag on every page allocation.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1710171527560.140898@chino.kir.corp.google.comSigned-off-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMel Gorman <mgorman@techsingularity.net>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Current flow guarantees a valid pointer when handling the __GFP_ZERO
case.  So remove the unnecessary NULL pointer check.

Link: http://lkml.kernel.org/r/1507203141-11959-1-git-send-email-miles.chen@mediatek.comSigned-off-by: NMiles Chen <miles.chen@mediatek.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kernel may panic when an oom happens without killable process
sometimes it is caused by huge unreclaimable slabs used by kernel.

Although kdump could help debug such problem, however, kdump is not
available on all architectures and it might be malfunction sometime.
And, since kernel already panic it is worthy capturing such information
in dmesg to aid touble shooting.

Print out unreclaimable slab info (used size and total size) which
actual memory usage is not zero (num_objs * size != 0) when
unreclaimable slabs amount is greater than total user memory (LRU
pages).

The output looks like:

  Unreclaimable slab info:
  Name                      Used          Total
  rpc_buffers               31KB         31KB
  rpc_tasks                  7KB          7KB
  ebitmap_node            1964KB       1964KB
  avtab_node              5024KB       5024KB
  xfs_buf                 1402KB       1402KB
  xfs_ili                  134KB        134KB
  xfs_efi_item             115KB        115KB
  xfs_efd_item             115KB        115KB
  xfs_buf_item             134KB        134KB
  xfs_log_item_desc        342KB        342KB
  xfs_trans               1412KB       1412KB
  xfs_ifork                212KB        212KB

[yang.s@alibaba-inc.com: v11]
  Link: http://lkml.kernel.org/r/1507656303-103845-4-git-send-email-yang.s@alibaba-inc.com
Link: http://lkml.kernel.org/r/1507152550-46205-4-git-send-email-yang.s@alibaba-inc.comSigned-off-by: NYang Shi <yang.s@alibaba-inc.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

According to discussion with Christoph
(https://marc.info/?l=linux-kernel&m=150695909709711&w=2), it sounds like
it is pointless to keep CONFIG_SLABINFO around.

This patch removes the CONFIG_SLABINFO config option, but /proc/slabinfo
is still available.

[yang.s@alibaba-inc.com: v11]
  Link: http://lkml.kernel.org/r/1507656303-103845-3-git-send-email-yang.s@alibaba-inc.com
Link: http://lkml.kernel.org/r/1507152550-46205-3-git-send-email-yang.s@alibaba-inc.comSigned-off-by: NYang Shi <yang.s@alibaba-inc.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "oom: capture unreclaimable slab info in oom message", v10.

Recently we ran into a oom issue, kernel panic due to no killable
process.  The dmesg shows huge unreclaimable slabs used almost 100%
memory, but kdump doesn't capture vmcore due to some reason.

So, it may sound better to capture unreclaimable slab info in oom
message when kernel panic to aid trouble shooting and cover the corner
case.  Since kernel already panic, so capturing more information sounds
worthy and doesn't bother normal oom killer.

With the patchset, tools/vm/slabinfo has a new option, "-U", to show
unreclaimable slab only.

And, oom will print all non zero (num_objs * size != 0) unreclaimable
slabs in oom killer message.

This patch (of 3):

Add "-U" option to show unreclaimable slabs only.

"-U" and "-S" together can tell us what unreclaimable slabs use the most
memory to help debug huge unreclaimable slabs issue.

Link: http://lkml.kernel.org/r/1507152550-46205-2-git-send-email-yang.s@alibaba-inc.comSigned-off-by: NYang Shi <yang.s@alibaba-inc.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Link: http://lkml.kernel.org/r/71604351584F6A4EBAE558C676F37CA4F3CDE3A9@H3CMLB14-EX.srv.huawei-3com.comSigned-off-by: Nguozhonghua <guozhonghua@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When dlm_add_migration_mle returns -EEXIST, previously input mle will
not be initialized.  So we can't use its associated dlm object.  And we
truly don't need this mle for already launched migration progress, since
oldmle has taken this role.

Link: http://lkml.kernel.org/r/63ADC13FD55D6546B7DECE290D39E373CED7AA61@H3CMLB14-EX.srv.huawei-3com.comSigned-off-by: NChangwei Ge <ge.changwei@h3c.com>
Reviewed-by: NJoseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The subsystem.su_mutex is required while accessing the item->ci_parent,
otherwise, NULL pointer dereference to the item->ci_parent will be
triggered in the following situation:

add node                     delete node
sys_write
 vfs_write
  configfs_write_file
   o2nm_node_store
    o2nm_node_local_write
                             do_rmdir
                              vfs_rmdir
                               configfs_rmdir
                                mutex_lock(&subsys->su_mutex);
                                unlink_obj
                                 item->ci_group = NULL;
                                 item->ci_parent = NULL;
	 to_o2nm_cluster_from_node
	  node->nd_item.ci_parent->ci_parent
	  BUG since of NULL pointer dereference to nd_item.ci_parent

Moreover, the o2nm_cluster also should be protected by the
subsystem.su_mutex.

[alex.chen@huawei.com: v2]
  Link: http://lkml.kernel.org/r/59EEAA69.9080703@huawei.com
Link: http://lkml.kernel.org/r/59E9B36A.10700@huawei.comSigned-off-by: NAlex Chen <alex.chen@huawei.com>
Reviewed-by: NJun Piao <piaojun@huawei.com>
Reviewed-by: NJoseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ip_alloc_sem should be taken in ocfs2_get_block() when reading file in
DIRECT mode to prevent concurrent access to extent tree with
ocfs2_dio_end_io_write(), which may cause BUGON in the following
situation:

read file 'A'                                  end_io of writing file 'A'
vfs_read
 __vfs_read
  ocfs2_file_read_iter
   generic_file_read_iter
    ocfs2_direct_IO
     __blockdev_direct_IO
      do_blockdev_direct_IO
       do_direct_IO
        get_more_blocks
         ocfs2_get_block
          ocfs2_extent_map_get_blocks
           ocfs2_get_clusters
            ocfs2_get_clusters_nocache()
             ocfs2_search_extent_list
              return the index of record which
              contains the v_cluster, that is
              v_cluster > rec[i]->e_cpos.
                                                ocfs2_dio_end_io
                                                 ocfs2_dio_end_io_write
                                                  down_write(&oi->ip_alloc_sem);
                                                  ocfs2_mark_extent_written
                                                   ocfs2_change_extent_flag
                                                    ocfs2_split_extent
                                                     ...
                                                 --> modify the rec[i]->e_cpos, resulting
                                                     in v_cluster < rec[i]->e_cpos.
             BUG_ON(v_cluster < le32_to_cpu(rec->e_cpos))

[alex.chen@huawei.com: v3]
  Link: http://lkml.kernel.org/r/59EF3614.6050008@huawei.com
Link: http://lkml.kernel.org/r/59EF3614.6050008@huawei.com
Fixes: c15471f7 ("ocfs2: fix sparse file & data ordering issue in direct io")
Signed-off-by: NAlex Chen <alex.chen@huawei.com>
Reviewed-by: NJun Piao <piaojun@huawei.com>
Reviewed-by: NJoseph Qi <jiangqi903@gmail.com>
Reviewed-by: NGang He <ghe@suse.com>
Acked-by: NChangwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

we should wait dio requests to finish before inode lock in
ocfs2_setattr(), otherwise the following deadlock will happen:

process 1                  process 2                    process 3
truncate file 'A'          end_io of writing file 'A'   receiving the bast messages
ocfs2_setattr
 ocfs2_inode_lock_tracker
  ocfs2_inode_lock_full
 inode_dio_wait
  __inode_dio_wait
  -->waiting for all dio
  requests finish
                                                        dlm_proxy_ast_handler
                                                         dlm_do_local_bast
                                                          ocfs2_blocking_ast
                                                           ocfs2_generic_handle_bast
                                                            set OCFS2_LOCK_BLOCKED flag
                        dio_end_io
                         dio_bio_end_aio
                          dio_complete
                           ocfs2_dio_end_io
                            ocfs2_dio_end_io_write
                             ocfs2_inode_lock
                              __ocfs2_cluster_lock
                               ocfs2_wait_for_mask
                               -->waiting for OCFS2_LOCK_BLOCKED
                               flag to be cleared, that is waiting
                               for 'process 1' unlocking the inode lock
                           inode_dio_end
                           -->here dec the i_dio_count, but will never
                           be called, so a deadlock happened.

Link: http://lkml.kernel.org/r/59F81636.70508@huawei.comSigned-off-by: NAlex Chen <alex.chen@huawei.com>
Reviewed-by: NJun Piao <piaojun@huawei.com>
Reviewed-by: NJoseph Qi <jiangqi903@gmail.com>
Acked-by: NChangwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Link: http://lkml.kernel.org/r/59C5D7D6.9050106@huawei.comSigned-off-by: NJun Piao <piaojun@huawei.com>
Reviewed-by: NAlex Chen <alex.chen@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a node dies, other live nodes have to choose a new master for an
existed lock resource mastered by the dead node.

As for ocfs2/dlm implementation, this is done by function -
dlm_move_lockres_to_recovery_list which marks those lock rsources as
DLM_LOCK_RES_RECOVERING and manages them via a list from which DLM
changes lock resource's master later.

So without invoking dlm_move_lockres_to_recovery_list, no master will be
choosed after dlm recovery accomplishment since no lock resource can be
found through ::resource list.

What's worse is that if DLM_LOCK_RES_RECOVERING is not marked for lock
resources mastered a dead node, it will break up synchronization among
nodes.

So invoke dlm_move_lockres_to_recovery_list again.

Fixs: 'commit ee8f7fcb ("ocfs2/dlm: continue to purge recovery lockres when recovery master goes down")'
Link: http://lkml.kernel.org/r/63ADC13FD55D6546B7DECE290D39E373CED6E0F9@H3CMLB14-EX.srv.huawei-3com.comSigned-off-by: NChangwei Ge <ge.changwei@h3c.com>
Reported-by: NVitaly Mayatskih <v.mayatskih@gmail.com>
Tested-by: NVitaly Mayatskikh <v.mayatskih@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Link: http://lkml.kernel.org/r/59E064BB.8000005@huawei.comSigned-off-by: NJun Piao <piaojun@huawei.com>
Reviewed-by: NJoseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

destroy_workqueue() will do flushing work for us.

Link: http://lkml.kernel.org/r/59E06476.3090502@huawei.comSigned-off-by: NJun Piao <piaojun@huawei.com>
Reviewed-by: NJoseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Link: http://lkml.kernel.org/r/71604351584F6A4EBAE558C676F37CA4D0743232@H3CMLB12-EX.srv.huawei-3com.comSigned-off-by: Nguozhonghua <guozhonghua@h3c.com>
Acked-by: NChangwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The m32r Kconfig provides both CPU_BIG_ENDIAN and CPU_LITTLE_ENDIAN
configuration options.  As they are user-selectable and independent,
this allows invalid configurations:

  - All m32r defconfigs build a big endian kernel, but CPU_BIG_ENDIAN is
    not set, causing compiler warnings like:

	include/linux/byteorder/big_endian.h:7:2: warning: #warning inconsistent configuration, needs CONFIG_CPU_BIG_ENDIAN [-Wcpp]
	 #warning inconsistent configuration, needs CONFIG_CPU_BIG_ENDIAN
	  ^

  - Since commit 5bdfca64 ("m32r: define CPU_BIG_ENDIAN"),
    building an allmodconfig or allyesconfig enables both
    CONFIG_CPU_BIG_ENDIAN and CONFIG_CPU_LITTLE_ENDIAN.
    While this did get rid of the warning above, both options are
    obviously mutually exclusive.

Fix this by making only CPU_LITTLE_ENDIAN configurable by the user, as
before, and by making sure exactly one of CPU_BIG_ENDIAN and
CPU_LITTLE_ENDIAN is always enabled.

Link: http://lkml.kernel.org/r/1509361505-18150-1-git-send-email-geert@linux-m68k.org
Fixes: 5bdfca64 ("m32r: define CPU_BIG_ENDIAN")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch provides 3 new arguments for bloat-o-meter
 1) -c -> for all (showing function and data differently)
 2) -d -> data
 3) -t -> function

output:

  ./scripts/bloat-o-meter  -c "file1" "file2"
  add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-152 (-152)
  Function                                     old     new   delta
  main                                         412     260    -152
  Total: Before=548, After=396, chg -27.74%
  ##########################################################
  add/remove: 1/0 grow/shrink: 1/0 up/down: 84/0 (84)
  Data                                         old     new   delta
  arr                                            -      64     +64
  backtrace                                     60      80     +20
  Total: Before=109, After=193, chg +77.06%
  ##########################################################
  add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-64 (-64)
  RO Data                                      old     new   delta
  arr                                           64       -     -64
  Total: Before=68, After=4, chg -94.12%

[maninder1.s@samsung.com: v1 -> v2]
  Link: http://lkml.kernel.org/r/1506569402-24787-1-git-send-email-maninder1.s@samsung.com
Link: http://lkml.kernel.org/r/1506336313-27187-1-git-send-email-maninder1.s@samsung.comSigned-off-by: NVaneet Narang <v.narang@samsung.com>
Signed-off-by: NManinder Singh <maninder1.s@samsung.com>
Cc: Amit Sahrawat <a.sahrawat@samsung.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: <pankaj.m@samsung.com>
Cc: <a.sahrawat@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull arm64 updates from Will Deacon:
 "The big highlight is support for the Scalable Vector Extension (SVE)
  which required extensive ABI work to ensure we don't break existing
  applications by blowing away their signal stack with the rather large
  new vector context (<= 2 kbit per vector register). There's further
  work to be done optimising things like exception return, but the ABI
  is solid now.

  Much of the line count comes from some new PMU drivers we have, but
  they're pretty self-contained and I suspect we'll have more of them in
  future.

  Plenty of acronym soup here:

   - initial support for the Scalable Vector Extension (SVE)

   - improved handling for SError interrupts (required to handle RAS
     events)

   - enable GCC support for 128-bit integer types

   - remove kernel text addresses from backtraces and register dumps

   - use of WFE to implement long delay()s

   - ACPI IORT updates from Lorenzo Pieralisi

   - perf PMU driver for the Statistical Profiling Extension (SPE)

   - perf PMU driver for Hisilicon's system PMUs

   - misc cleanups and non-critical fixes"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits)
  arm64: Make ARMV8_DEPRECATED depend on SYSCTL
  arm64: Implement __lshrti3 library function
  arm64: support __int128 on gcc 5+
  arm64/sve: Add documentation
  arm64/sve: Detect SVE and activate runtime support
  arm64/sve: KVM: Hide SVE from CPU features exposed to guests
  arm64/sve: KVM: Treat guest SVE use as undefined instruction execution
  arm64/sve: KVM: Prevent guests from using SVE
  arm64/sve: Add sysctl to set the default vector length for new processes
  arm64/sve: Add prctl controls for userspace vector length management
  arm64/sve: ptrace and ELF coredump support
  arm64/sve: Preserve SVE registers around EFI runtime service calls
  arm64/sve: Preserve SVE registers around kernel-mode NEON use
  arm64/sve: Probe SVE capabilities and usable vector lengths
  arm64: cpufeature: Move sys_caps_initialised declarations
  arm64/sve: Backend logic for setting the vector length
  arm64/sve: Signal handling support
  arm64/sve: Support vector length resetting for new processes
  arm64/sve: Core task context handling
  arm64/sve: Low-level CPU setup
  ...

Merge tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux

Pull RISC-V architecture support from Palmer Dabbelt:
 "This contains the core RISC-V Linux port, which has been through nine
  rounds of review on various mailing lists. The port is not complete:
  there's some cleanup patches moving through the review process, a
  whole bunch of drivers that need some work, and a lot of feature
  additions that will be needed.

  The patches contained in this tag have been through nine rounds of
  review on the various mailing lists. I have some outstanding cleanup
  patches, but since there's been so much review on these patches I
  thought it would be best to submit them as-is and then submit explicit
  cleanup patches so everyone can review them. This first patch set is
  big enough that it's a bit of a pain to constantly rewrite, and it's
  caused a few headaches with various contributors.

  The port is definately a work in progress. While what's there builds
  and boots with 4.14, it's a bit hard to actually see anything happen
  because there are no device drivers yet. I maintain a staging branch
  that contains all the device drivers and cleanup that actually works,
  but those patches won't all be ready for a while. I'd like to get what
  we currently have into your tree so everyone can start working from a
  single base -- of particular importance is allowing the glibc
  upstreaming process to proceed so we can sort out any possibly
  lingering user-visible ABI problems we might have.

  Copied below is the ChangeLog that contains the history of this patch
  set:

   (v9) As per suggestions on our v8 patch set, I've split the core
        architecture code out from our drivers and would like to submit
        this patch set to be included into linux-next, with the goal
        being to be merged in during the next merge window. This patch
        set is based on 4.14-rc2, but if it's better to have it based on
        something else then I can change it around.

        This patch set contains just the core arch code for RISC-V, so
        while it builds an nominally boots, you can't print or take an
        interrupt so it's not that useful. If you're looking to actually
        boot a system it would probably be better to use the full patch
        set listed below.

        We've collected a handful of tags from reviewers, and the
        remainder of the patch set only got minimal feedback last time.
        Here's what changed:

         - We now use the device tree to initialize the timer driver so
           it's less tighly coupled with the arch port.

         - I cleaned up the defconfigs -- there's actually now just one,
           and it's empty. For now I think we're OK with what the kernel
           sets as defaults, but I anticipate we'll begin to expand this
           as people start to use the port more.

         - The VDSO symbols version is sane.

         - We WFI while spinning in the boot loop.

         - A handful of comments have been added.

        While there are still a handful of FIXMEs in this patch set,
        we've started to get enough interest from various users and
        contributors that maintaining an out of tree patch set is
        starting to become a big burden. Hopefully the patches are good
        enough to merge now, which will at least get everyone working in
        a more reasonable manner as we clean up the remaining issues.

   (v8) I know it may not be the ideal time to submit a patch set right
        now, as it's the middle of the merge window, but things have
        calmed down quite a bit in the last month so I thought it would
        be good to get everyone on the same page. There's been a handful
        of changes since the last patch set, but most of them are fairly
        minor:

         - We changed PAGE_OFFSET to allowing mapping more physical
           memory on 64-bit systems. This is user configurable, as it
           triggers a different code model that generates slightly less
           efficient code.

         - The device tree binding documentation is back, I'd managed to
           lose it at some point.

         - We now pass the atomic64 test suite

         - The SBI timer driver has been refactored.

   (v7) It's been a while since my last patch set, but the changes han
        been fairly minimal:

         - The PCI cleanup patches have been dropped, we'll do them as a
           separate patch set later.

         - We've the Kconfig entries from CONFIG_ISA_* to
           CONFIG_RISCV_ISA_*, to make grep easier.

         - There have been a handful of memory model related tweaks in
           I/O land, particularly relating the PCI and the upcoming
           platform specification. There are significant comments in the
           relevant files. This is still a WIP, but I think we're close
           to getting as good as we're going to get until we end up with
           some more specifications.

   (v6) As it's been only a day since the v5 patch set, the changes are
        pretty minimal:

         - The patch set is now based on linux-next/master, which I
           believe is a better base now that we're getting closer to
           upstream.

         - EARLY_PRINTK is no longer an option. Since the SBI console is
           reasonable, there's no penalty to enabling it (and thus no
           benefit to disabling it).

         - The mmap syscalls were refactored a bit.

   (v5) Things have really started to calm down, so this is fairly
        similar to the v4 patch set. The most interesting changes
        include:

         - We've moved back to a single patch set.

         - SMP support has been fixed, I was accidentally running on a
           non-SMP configuration. There were various mistakes all over
           the tree as a result of this.

         - The cmpxchg syscalls have been removed, as they were deemed a
           bad idea. As a result, RISC-V Linux systems mandate the A
           extension. The corresponding Kconfig entry to enable builds
           on non-A systems has been removed.

         - A few more atomic fixes: mostly fence changes, but those
           resulted in a handful of additional macros that were no
           longer necessary.

         - riscv_early_sie has been removed.

   (v4) There have only been a few changes since the v3 patch set:

         - The cmpxchg64 syscall is no longer enabled on 32-bit systems.
           It's not possible to provide this on SMP systems, and it's
           not necessary as glibc knows not to call it.

         - We provide a ELF_HWCAP so users can determine the ISA of the
           machine the kernel is running on.

         - The multi-line comments are in a better form.

         - There were a handful of headers that could be replaced with
           the asm-generic versions, and a few unnecessary definitions.

         - We no longer use printk, but instead use pr_*.

         - A few Kconfig and defconfig entries have been cleaned up.

   (v3) A highlight of the changes since the v2 patch set includes:

         - We've split out all our drivers into separate patch sets,
           which I've already sent out to the relevant maintainers. I
           haven't included those patches in this patch set, but some of
           them are necessary to build our port.

         - The patch set is now split up differently: rather than being
           split per directory it is split per topic. Hopefully this
           will make it easier to review the port on the mailing list.
           The split is a bit rough, so you probably still want to look
           at the patch set as a whole.

         - atomic.h has been completely rewritten and is hopefully now
           correct. I've attempted to sanitize the various other memory
           model related code as well, and I think it should all be sane
           now aside from a handful of FIXMEs commented in the code.

         - We've changed the cmpexchg syscall to always exist and to not
           be multiplexed. There is also a VDSO entry for compare and
           exchange, which allows kernels with the A extension to
           execute user code without the A extension reasonably fast.

         - Our user-visible register state now contains enough space for
           the Q extension for 128-bit floating point, as well as a few
           words to allow extensibility to future ISA extensions like
           the eventual V extension for vectors.

         - A handful of driver cleanups, but these have been split into
           separate patch sets now so I won't duplicate them here.

   (v2) A highlight of the changes since the v1 patch set includes:

         - We've split out our drivers into the right places, which
           means now there's a lot more patches. I'll be submitting
           these patches to various subsystem maintainers and including
           them in any future RISC-V patch sets until they've been
           merged.

         - The SBI console driver has been completely rewritten to use
           the HVC helpers and is now significantly smaller.

         - We've begun to use weaker barriers as opposed to just the big
           "fence". There's still some work to do here, specifically:
            - We need fences in the relaxed MMIO functions.
            - The non-relaxed MMIO functions are missing R/W bits on their fences.
            - Many AMOs need the aq and rl bits set.

         - We now have thread_info in task_struct. As a result, sscratch
           now contains TP instead of SP. This was necessary because
           thread_info is no longer on the stack.

         - A few shared routines have been added that we use instead of
           creating another arch copy"
Reviewed-by: NArnd Bergmann <arnd@arndb.de>

* tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
  RISC-V: Build Infrastructure
  RISC-V: User-facing API
  RISC-V: Paging and MMU
  RISC-V: Device, timer, IRQs, and the SBI
  RISC-V: Task implementation
  RISC-V: ELF and module implementation
  RISC-V: Generic library routines and assembly
  RISC-V: Atomic and Locking Code
  RISC-V: Init and Halt Code
  dt-bindings: RISC-V CPU Bindings
  lib: Add shared copies of some GCC library routines
  MAINTAINERS: Add RISC-V

Pull livepatching updates from Jiri Kosina:

 - shadow variables support, allowing livepatches to associate new
   "shadow" fields to existing data structures, from Joe Lawrence

 - pre/post patch callbacks API, allowing livepatch writers to register
   callbacks to be called before and after patch application, from Joe
   Lawrence

* 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: __klp_disable_patch() should never be called for disabled patches
  livepatch: Correctly call klp_post_unpatch_callback() in error paths
  livepatch: add transition notices
  livepatch: move transition "complete" notice into klp_complete_transition()
  livepatch: add (un)patch callbacks
  livepatch: Small shadow variable documentation fixes
  livepatch: __klp_shadow_get_or_alloc() is local to shadow.c
  livepatch: introduce shadow variable API

Pull trivial tree updates from Jiri Kosina:
 "The usual rocket-science from trivial tree for 4.15"

* 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  MAINTAINERS: relinquish kconfig
  MAINTAINERS: Update my email address
  treewide: Fix typos in Kconfig
  kfifo: Fix comments
  init/Kconfig: Fix module signing document location
  misc: ibmasm: Return error on error path
  HID: logitech-hidpp: fix mistake in printk, "feeback" -> "feedback"
  MAINTAINERS: Correct path to uDraw PS3 driver
  tracing: Fix doc mistakes in trace sample
  tracing: Kconfig text fixes for CONFIG_HWLAT_TRACER
  MIPS: Alchemy: Remove reverted CONFIG_NETLINK_MMAP from db1xxx_defconfig
  mm/huge_memory.c: fixup grammar in comment
  lib/xz: Add fall-through comments to a switch statement

Pull HID updates from Jiri Kosina:

 - high resolution mode for Dell canvas support, from Benjamin Tissoires

 - pen handling fixes for the Wacom driver, from Jason Gerecke

 - i2c-hid: Apollo-Lake based laptops improvements, from Hans de Goede

 - Input/Core: eraser tool support, from Ping Cheng

 - new ALPS touchpad (T4, found currently on HP EliteBook 1000, Zbook
   Stduio and HP Elite book x360) supportm from Masaki Ota

 - other smaller assorted fixes

* 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (33 commits)
  HID: cp2112: fix broken gpio_direction_input callback
  HID: cp2112: fix interface specification URL
  HID: Wacom: switch Dell canvas into highres mode
  HID: wacom: generic: Send BTN_STYLUS3 when both barrel switches are set
  HID: sony: Fix SHANWAN pad rumbling on USB
  HID: i2c-hid: Add no-irq-after-reset quirk for 0911:5288 device
  HID: add backlight level quirk for Asus ROG laptops
  HID: cp2112: add HIDRAW dependency
  HID: Add ID 044f:b605 ThrustMaster, Inc. force feedback Racing Wheel
  HID: hid-logitech: remove redundant assignment to pointer value
  HID: wacom: generic: Recognize WACOM_HID_WD_PEN as a type of pen collection
  HID: rmi: Check that a device is a RMI device before calling RMI functions
  HID: add multi-input quirk for GamepadBlock
  HID: alps: add new U1 device ID
  HID: alps: add support for Alps T4 Touchpad device
  HID: alps: remove variables local to u1_init() from the device struct
  HID: alps: properly handle max_fingers and minimum on X and Y axis
  HID: alps: Separate U1 device code
  HID: alps: delete unnecessary struct u1_dev devInfo
  HID: usbhid: Convert timers to use timer_setup()
  ...

- High resolution mode for DEll canvas support, from Benjamin Tissoires
- A lot of improvements to pen handling in the Wacom driver, from Jason Gerecke
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

- usbhid: conversion to timer_setup() and from_timer() from Kees Cook
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

- cp2112: GPIO error handling and Kconfig fixes from Sébastien Szymanski
- i2c-hid: fixup / quirk for Apollo-Lake based laptops, from Hans de Goede
- Input/Core: add eraser tool support, from Ping Cheng
- small assorted code fixes
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

- SHANWAN PS3 rumble fix from Bastien Nocera
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

- make sure that we forward MSC_TIMESTAMP in accordance to the specification,
  from Nicolas Boichat
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

- small code fixes for Logitech driver from Colin Ian King

- trivial printk() line termination fix for HyperV

- Asus laptop fixes (fn keys, backlight), from Mustafa Kuscu and
  Maxime Bellengé

- New ALPS touchpad (T4, found currently on HP EliteBook 1000, Zbook Stduio
  and HP Elite book x360) support from Masaki Ota

- Wacom: recognize PEN application collection properly, from Jason Gerecke
- RMI: avoid cofusion caused by RMI functions being by mistake called on
  non-RMI devices, from Andrew Duggan
- small device-ID-specific quirks/fixes
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This pulls in an infrastructure/API that allows livepatch writers to
register pre-patch and post-patch callbacks that allow for running a
glue code necessary for finalizing the patching if necessary.

Conflicts:
	kernel/livepatch/core.c
	- trivial conflict by adding a callback call into
	  module going notifier vs. moving that code block
	  to klp_cleanup_module_patches_limited()
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Shadow variables allow callers to associate new shadow fields to existing data
structures.  This is intended to be used by livepatch modules seeking to
emulate additions to data structure definitions.

Pull DeviceTree updates from Rob Herring:
 "A bigger diffstat than usual with the kbuild changes and a tree wide
  fix in the binding documentation.

  Summary:

   - kbuild cleanups and improvements for dtbs

   - Code clean-up of overlay code and fixing for some long standing
     memory leak and race condition in applying overlays

   - Improvements to DT memory usage making sysfs/kobjects optional and
     skipping unflattening of disabled nodes. This is part of kernel
     tinification efforts.

   - Final piece of removing storing the full path for every DT node.
     The prerequisite conversion of printk's to use device_node format
     specifier happened in 4.14.

   - Sync with current upstream dtc. This brings additional checks to
     dtb compiling.

   - Binding doc tree wide removal of leading 0s from examples

   - RTC binding documentation adding missing devices and some
     consolidation of duplicated bindings

   - Vendor prefix documentation for nutsboard, Silicon Storage
     Technology, shimafuji, Tecon Microprocessor Technologies, DH
     electronics GmbH, Opal Kelly, and Next Thing"

* tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
  dt-bindings: usb: add #phy-cells to usb-nop-xceiv
  dt-bindings: Remove leading zeros from bindings notation
  kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib
  MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry
  kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile
  .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore
  .gitignore: sort normal pattern rules alphabetically
  dt-bindings: add vendor prefix for Next Thing Co.
  scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9
  of: dynamic: fix memory leak related to properties of __of_node_dup
  of: overlay: make pr_err() string unique
  of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove
  of: overlay: remove unneeded check for NULL kbasename()
  of: overlay: remove a dependency on device node full_name
  of: overlay: simplify applying symbols from an overlay
  of: overlay: avoid race condition between applying multiple overlays
  of: overlay: loosen overly strict phandle clash check
  of: overlay: expand check of whether overlay changeset can be removed
  of: overlay: detect cases where device tree may become corrupt
  of: overlay: minor restructuring
  ...

Merge tag 'leds_for_4.15rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:
 "New LED class driver:
   - add a driver for PC Engines APU/APU2 LEDs

  New LED trigger:
   - add a system activity LED trigger

  LED core improvements:
   - replace flags bit shift with BIT() macros

  Convert timers to use timer_setup() in:
   - led-core
   - ledtrig-activity
   - ledtrig-heartbeat
   - ledtrig-transient

  LED class drivers fixes:
   - lp55xx: fix spelling mistake: 'cound' -> 'could'
   - tca6507: Remove unnecessary reg check
   - pca955x: Don't invert requested value in pca955x_gpio_set_value()

  LED documentation improvements:
   - update 00-INDEX file"

* tag 'leds_for_4.15rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: Add driver for PC Engines APU/APU2 LEDs
  leds: lp55xx: fix spelling mistake: 'cound' -> 'could'
  leds: Convert timers to use timer_setup()
  Documentation: leds: Update 00-INDEX file
  leds: tca6507: Remove unnecessary reg check
  leds: ledtrig-heartbeat: Convert timers to use timer_setup()
  leds: Replace flags bit shift with BIT() macros
  leds: pca955x: Don't invert requested value in pca955x_gpio_set_value()
  leds: ledtrig-activity: Add a system activity LED trigger

Pull input updates from Dmitry Torokhov:

 - three new touchscreen drivers: EETI EXC3000, HiDeep, and Samsung
   S6SY761

 - the timer API conversion (setup_timer() -> timer_setup())

 - a few drivers swiytched to using managed API for creating custom
   device attributes

 - other assorted fixed and cleanups.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits)
  Input: gamecon - mark expected switch fall-throughs
  Input: sidewinder - mark expected switch fall-throughs
  Input: spaceball - mark expected switch fall-throughs
  Input: uinput - unlock on allocation failure in ioctl
  Input: add support for the Samsung S6SY761 touchscreen
  Input: add support for HiDeep touchscreen
  Input: st1232 - remove obsolete platform device support
  Input: convert autorepeat timer to use timer_setup()
  media: ttpci: remove autorepeat handling and use timer_setup
  Input: cyttsp4 - avoid overflows when calculating memory sizes
  Input: mxs-lradc - remove redundant assignment to pointer input
  Input: add I2C attached EETI EXC3000 multi touch driver
  Input: goodix - support gt1151 touchpanel
  Input: ps2-gpio - actually abort probe when connected to sleeping GPIOs
  Input: hil_mlc - convert to using timer_setup()
  Input: hp_sdc - convert to using timer_setup()
  Input: touchsceen - convert timers to use timer_setup()
  Input: keyboard - convert timers to use timer_setup()
  Input: uinput - fold header into the driver proper
  Input: uinput - remove uinput_allocate_device()
  ...

Pull sound updates from Takashi Iwai:
 "There are no big surprising changes in this cycle, yet not too boring,
  either. The biggest change from diffstat POV is the removal of the
  legacy OSS driver codes that have been already disabled for a long
  time. This will bring a few trivial merge conflicts.

  As new features in ASoC side, there are two things: a new AC97 bus
  implementation and AMD Stony platform support. Both include the
  relevant changes shared with other subsystems, e.g. AC97 MFD changes
  and DRM AMD changes.

  Some other highlighted topics are:

   - A bunch of USB-audio drivers got the hardening against the
     malicious device accesses with a new helper code for endpoint
     sanity check

   - Lots of cleanups for ASoC Intel platform code, including support
     for their open source audio firmware

   - Continued ASoC core componentization works

   - Support for scaling MCLK with sample rate in ASoC simple-card

   - Stabler PCM hot-unplug capability, especially for ASoC usages"

* tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (302 commits)
  Documentation: sound: hd-audio: notes.rst
  ASoC: bcm2835: Support left/right justified and DSP modes
  ASoC: bcm2835: Enforce full symmetry
  ASoC: bcm2835: Support additional samplerates up to 384kHz
  ASoC: bcm2835: Add support for TDM modes
  ASoC: add mclk-fs support to audio graph card
  ASoC: add mclk-fs to audio graph card binding
  ASoC: rt5514: work around link error
  ASoC: rt5514: mark PM functions as __maybe_unused
  ASoC: rt5663: Check the JD status in the button pushing
  ASoC: amd: Modified DMA transfer Mechanism for Playback
  ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2
  ASoC: sun4i-codec: fixed 32bit audio capture support for H3/H2+
  ASoC: da7213: add support for DSP modes
  ASoC: sun8i-codec: Add a comment on the LRCK inversion
  ASoC: sun8i-codec: Set the BCLK divider
  ASoC: rt5663: Delay and retry reading rt5663 ID register
  ASoC: amd: use do_div rather than 64 bit division to fix 32 bit builds
  ASoC: cs42l56: Fix reset GPIO name in example DT binding
  ASoC: rt5514-spi: check irq status to schedule data copy in resume function
  ...

Pull i2c updates from Wolfram Sang:
 "This contains two bigger than usual tree-wide changes this time. They
  all have proper acks, caused no merge conflicts in linux-next where
  they have been for a while. They are namely:

   - to-gpiod conversion of the i2c-gpio driver and its users (touching
     arch/* and drivers/mfd/*)

   - adding a sbs-manager based on I2C core updates to SMBus alerts
     (touching drivers/power/*)

  Other notable changes:

   - i2c_boardinfo can now carry a dev_name to be used when the device
     is created. This is because some devices in ACPI world need fixed
     names to find the regulators.

   - the designware driver got a long discussed overhaul of its PM
     handling. img-scb and davinci got PM support, too.

   - at24 driver has way better OF support. And it has a new maintainer.
     Thanks Bartosz for stepping up!

  The rest is regular driver updates and fixes"

* 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits)
  ARM: sa1100: simpad: Correct I2C GPIO offsets
  i2c: aspeed: Deassert reset in probe
  eeprom: at24: Add OF device ID table
  MAINTAINERS: new maintainer for AT24 driver
  i2c: nuc900: remove platform_data, too
  i2c: thunderx: Remove duplicate NULL check
  i2c: taos-evm: Remove duplicate NULL check
  i2c: Make i2c_unregister_device() NULL-aware
  i2c: xgene-slimpro: Support v2
  i2c: mpc: remove useless variable initialization
  i2c: omap: Trigger bus recovery in lockup case
  i2c: gpio: Add support for named gpios in DT
  dt-bindings: i2c: i2c-gpio: Add support for named gpios
  i2c: gpio: Local vars in probe
  i2c: gpio: Augment all boardfiles to use open drain
  i2c: gpio: Enforce open drain through gpiolib
  gpio: Make it possible for consumers to enforce open drain
  i2c: gpio: Convert to use descriptors
  power: supply: sbs-message: fix some code style issues
  power: supply: sbs-battery: remove unchecked return var
  ...

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.15 kernel cycle:

  Core:

   - Fix the semantics of raw GPIO to actually be raw. No inversion
     semantics as before, but also no open draining, and allow the raw
     operations to affect lines used for interrupts as the caller
     supposedly knows what they are doing if they are getting the big
     hammer.

   - Rewrote the __inner_function() notation calls to names that make
     more sense. I just find this kind of code disturbing.

   - Drop the .irq_base() field from the gpiochip since now all IRQs are
     mapped dynamically. This is nice.

   - Support for .get_multiple() in the core driver API. This allows us
     to read several GPIO lines with a single register read. This has
     high value for some usecases: it can be used to create
     oscilloscopes and signal analyzers and other things that rely on
     reading several lines at exactly the same instant. Also a generally
     nice optimization. This uses the new assign_bit() macro from the
     bitops lib that was ACKed by Andrew Morton and is implemented for
     two drivers, one of them being the generic MMIO driver so everyone
     using that will be able to benefit from this.

   - Do not allow requests of Open Drain and Open Source setting of a
     GPIO line simultaneously. If the hardware actually supports
     enabling both at the same time the electrical result would be
     disastrous.

   - A new interrupt chip core helper. This will be helpful to deal with
     "banked" GPIOs, which means GPIO controllers with several logical
     blocks of GPIO inside them. This is several gpiochips per device in
     the device model, in contrast to the case when there is a 1-to-1
     relationship between a device and a gpiochip.

  New drivers:

   - Maxim MAX3191x industrial serializer, a very interesting piece of
     professional I/O hardware.

   - Uniphier GPIO driver. This is the GPIO block from the recent
     Socionext (ex Fujitsu and Panasonic) platform.

   - Tegra 186 driver. This is based on the new banked GPIO
     infrastructure.

  Other improvements:

   - Some documentation improvements.

   - Wakeup support for the DesignWare DWAPB GPIO controller.

   - Reset line support on the DesignWare DWAPB GPIO controller.

   - Several non-critical bug fixes and improvements for the Broadcom
     BRCMSTB driver.

   - Misc non-critical bug fixes like exotic errorpaths, removal of dead
     code etc.

   - Explicit comments on fall-through switch() statements"

* tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits)
  gpio: tegra186: Remove tegra186_gpio_lock_class
  gpio: rcar: Add r8a77995 (R-Car D3) support
  pinctrl: bcm2835: Fix some merge fallout
  gpio: Fix undefined lock_dep_class
  gpio: Automatically add lockdep keys
  gpio: Introduce struct gpio_irq_chip.first
  gpio: Disambiguate struct gpio_irq_chip.nested
  gpio: Add Tegra186 support
  gpio: Export gpiochip_irq_{map,unmap}()
  gpio: Implement tighter IRQ chip integration
  gpio: Move lock_key into struct gpio_irq_chip
  gpio: Move irq_valid_mask into struct gpio_irq_chip
  gpio: Move irq_nested into struct gpio_irq_chip
  gpio: Move irq_chained_parent to struct gpio_irq_chip
  gpio: Move irq_default_type to struct gpio_irq_chip
  gpio: Move irq_handler to struct gpio_irq_chip
  gpio: Move irqdomain into struct gpio_irq_chip
  gpio: Move irqchip into struct gpio_irq_chip
  gpio: Introduce struct gpio_irq_chip
  pinctrl: armada-37xx: remove unused variable
  ...