- 02 12月, 2006 40 次提交
-
-
由 Mariusz Kozlowski 提交于
Possible memleak fix on error path. The changes: - out_kfree2 and out_free_urb replaced - missing scsi_host_put() added Here it goes: Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NOliver Neukum <oliver@neukum.name> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jaco Kroon 提交于
The mass storage device from Digitech designed for Flash Cards, as found on (for example) the GNX4 device has issues with residue, similar to the bug report at http://kerneltrap.org/node/6297. This patch adds the faulty storage device to unusual_devs.h, this not only reduces the noise in dmesg but also increases the transfer speeds by a factor of 7x for me (89kB/s -> 637kB/s). T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1210 ProdID=0003 Rev= 1.00 S: Manufacturer=DigiTech HMG S: Product=DigiTech Mass Storage C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms Signed-off-by: NJaco Kroon <jaco@kroon.co.za> Signed-off-by: NPhil Dibowitz <phil@ipom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as821) fixes a compiler warning when CONFIG_PM isn't on ("usb_autosuspend_work" defined but not used). Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Naranjo Manuel Francisco 提交于
> 2006/11/11, Adrian Bunk <bunk@stusta.de>: > > The Coverity checker spotted the following in > > drivers/usb/serial/aircable.c: > > > > <-- snip --> > > > > ... > > static void aircable_read(void *params) > > { > > ... Hi everyone, Sorry for the long time response but here is the patch, I think this way should work, if anyone has any suggestion let me know. What I do now is, in case I don't have the tty available I reschedule the work, I have tried it and it works with no problem, I even tried removing the device, and didn't find anything strange. Signed-off-by: NNaranjo Manuel <naranjo.manuel@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
All the other root-hub suspend or resume log messages, in ohci-hcd or any of the other host controller drivers, use the debug priority level. This patch (as815) makes the one single exception behave like all the rest. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_kill_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_kill_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_kill_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_kill_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_kill_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
Hello, - usb_free_urb() cleanup - usb_kill_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup - usb_kill_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
Hello, - usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oleg Verych 提交于
usb-serial: ti_usb, TI ez430 development tool ID Signed-off-by: NOleg Verych <olecom@flower.upol.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 daniel@centurion.net.nz 提交于
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
This patch makes the needlessly global wacom_sys_irq() static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NPing Cheng <pingc@wacom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Stephen Hemminger 提交于
Several functions in USB core overlap with global functions. The linker appears to do the right thing, but it is bad practice and makes debugging harder. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Minor cleanup/clarification in the ethernet gadget driver, using standard calls to test for Ethernet multicast and broadcast addresses. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as809b) moves the declaration of the hub driver's private data structure from hub.h into the hub.c source file. Lots of other files import hub.h; they have no need to know about the details of the hub driver's private data. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
Fix STATUS_PACKETS_* macros, where "&&" was mistakenly used where "&" should have. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NDavid Brownell <david-b@pacbell.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as814) adds usb_autopm_set_interface() to the autosuspend API. It also provides convenient wrapper routines, usb_autopm_enable() and usb_autopm_disable(), for drivers that want to specify directly whether autosuspend should be allowed. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as813) gathers together common code for USB interface autosuspend/autoresume. It also adds some simple checking at the time an autosuspend request is made, to see whether the request will fail. This way we don't add a workqueue entry when it would end up doing nothing. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
We have no benefits of having the usb_endpoint_* functions as functions, but making them inline saves text and data segment sizes: text data bss dec hex filename 14893634 3108770 1108840 19111244 1239d4c vmlinux.func 14893185 3108566 1108840 19110591 1239abf vmlinux.inline This is the result of a 2.6.19-rc3 kernel compiled with GCC 4.1.1 without CONFIG_MODULES, CONFIG_CC_OPTIMIZE_FOR_SIZE, CONFIG_REGPARM options set. USB support is fully enabled (while most of the other drivers are not), and that kernel has most of the USB code ported to use the endpoint functions. That happens because a call to those functions are expensive (in terms of bytes), while the function's size is smaller or have the same 'size' of the call. Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-