Add the Cisco Powertv cable settop box to the MIPS tree. This platform is
based on a MIPS 24Kc processor with various devices integrated on the same
ASIC. There are multiple models of this box, with differing configuration
but the same kernel runs across the product line.
Signed-off-by: NDavid VomLehn <dvomlehn@cisco.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/132/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/637/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Lemote Loongson 2F family machines need an external interrupt to wake the
system from the suspend mode.

For YeeLoong 2F and Mengloong 2F setup the keyboard interrupt as the wakeup
interrupt.

The new Fuloong 2F and LingLoong 2F have a button to directly send an
interrupt to the CPU so there is no need to setup an interrupt.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: yanh@lemote.com
Cc: huhb@lemote.com
Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: linux-pm@lists.linux-foundation.org
Patchwork: http://patchwork.linux-mips.org/patch/630/Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch add basic suspend support for loongson2f family machines,
loongson2f have a specific feature: when we set it's frequency to ZERO,
it will go into a wait mode, and then can be waked up by the external
interrupt. so, if we setup suitable interrupts before putting it into
wait mode, we will be able wake it up whenever we want via sending the
relative interrupts to it.

These interrupts are board-specific, Yeeloong2F use the keyboard
interrupt and SCI interrupt, but LingLoong and Fuloong2F use the
interrupts connected to the processors directly. and BTW: some old
LingLoong and FuLoong2F have no such interrupts connected, so, there is
no way to wake them up from suspend mode. and therefore, please do not
enable the kernel support for them.

The board-specific support will be added in the coming patches.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: yanh@lemote.com
Cc: huhb@lemote.com
Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: linux-pm@lists.linux-foundation.org
Patchwork: http://patchwork.linux-mips.org/patch/629/Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Loongson2f support video acceleration.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/624/
Patchwork: http://patchwork.linux-mips.org/patch/625/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch adds two new kernel options: CPU_SUPPORTS_CPUFREQ and
CPU_SUPPORTS_ADDRWINCFG to describe the new features of Loongons 2F and
replaces the several ugly #if clauses by them.

These two options will be utilized by the future loongson revisions and
related drivers such as the coming Loongson 2F CPUFreq driver.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add default config file for Lemote Loongson 2F family machines.  The
resulting kernel image can be shared between Fuloong 2F, Yeeloong 2F and
other Lemote Loongson 2F family machines.

If you are using an old PMON, and not using a 2f box, please add a new
command line argument in the boot.cfg.

For example, add this argument for 8.9inches notebook:

    machtype=lemote-yeeloong-2f-8.9inches

or

    machtype=8.9

More information from arch/mips/loongson/common/machtype.c.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: zhangfx@lemote.com
Cc: yanh@lemote.com 
Cc: huhb@lemote.com
Cc: Nicholas Mc Guire <hofrat@hofr.at>
Cc: Arnaud Patard <apatard@mandriva.com>
Cc: loongson-dev@googlegroups.com
Cc: linux-mips@linux-mips.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Fuloong 2F, Yeeloong 2F and Menglong 2F have different reset / shutdown
logic.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: zhangfx@lemote.com
Cc: yanh@lemote.com 
Cc: huhb@lemote.com
Cc: Nicholas Mc Guire <hofrat@hofr.at>
Cc: Arnaud Patard <apatard@mandriva.com>
Cc: loongson-dev@googlegroups.com
Cc: linux-mips@linux-mips.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The generic i8259_irq() will make kernel hang on booting, so Loongson 2F
needs its own polling method.

IP6 is shared by the bonito interrupt and perfcounter interrupts.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: zhangfx@lemote.com
Cc: yanh@lemote.com 
Cc: huhb@lemote.com
Cc: Nicholas Mc Guire <hofrat@hofr.at>
Cc: Arnaud Patard <apatard@mandriva.com>
Cc: loongson-dev@googlegroups.com
Cc: linux-mips@linux-mips.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

PCI support for the Fuloong 2E and Lemote Loongson 2F family machines is
mostly identical with the exception of CS5536 support.

Rename ops-fuloong2e.c to ops-loongson2.c then add the CS5536 support to
share most of the source code among Loongson machines.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: zhangfx@lemote.com
Cc: yanh@lemote.com 
Cc: huhb@lemote.com
Cc: Nicholas Mc Guire <hofrat@hofr.at>
Cc: Arnaud Patard <apatard@mandriva.com>
Cc: loongson-dev@googlegroups.com
Cc: linux-mips@linux-mips.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Lemote Loongson 2F family machines use CS5536 as their south bridge and need
these lowlevel interfaces to access the devices on CS5536.

Virtualize the legacy devices on CS5536 as PCI devices.  This way users can
access the CS5536 PCI config space directly as a normal multi-function
PCI 2.2 device.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: zhangfx@lemote.com
Cc: yanh@lemote.com 
Cc: huhb@lemote.com
Cc: Nicholas Mc Guire <hofrat@hofr.at>
Cc: Arnaud Patard <apatard@mandriva.com>
Cc: loongson-dev@googlegroups.com
Cc: linux-mips@linux-mips.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Currently rtclib is not available on Loongson family machines but the
legacy RTC driver works well on them.  Deselect RTC_LIB to allow the legacy
RTC driver to be selected.

The rtclib patch series

   http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=a91e34bf2595157830d599cb66becd52247b1819.1257383766.git.wuzhangjin%40gmail.com

or, in patchworks:

   http://patchwork.linux-mips.org/patch/570/
   http://patchwork.linux-mips.org/patch/571/
   http://patchwork.linux-mips.org/patch/572/

is eventually going to switch Lemote platforms to rtclib.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: zhangfx@lemote.com
Cc: yanh@lemote.com 
Cc: huhb@lemote.com
Cc: Nicholas Mc Guire <hofrat@hofr.at>
Cc: Arnaud Patard <apatard@mandriva.com>
Cc: loongson-dev@googlegroups.com
Cc: linux-mips@linux-mips.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add a new kernel option for Lemote Loongson 2F family machines.

Lemote loongson2f family machines utilize the 2f revision of loongson
processor and the AMD CS5536 south bridge.

Family members include Fuloong 2F mini PC, Yeeloong 2F notebook, LingLoong
all-in-one PC and others.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: zhangfx@lemote.com
Cc: yanh@lemote.com
Cc: huhb@lemote.com
Cc: Nicholas Mc Guire <hofrat@hofr.at>
Cc: Arnaud Patard <apatard@mandriva.com>
Cc: loongson-dev@googlegroups.com
Cc: linux-mips@linux-mips.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Loongson 2F has built-in DDR2 and PCI-X controller. The PCI-X controller
has a programming interface similiar to the the FPGA northbridge used on
Loongson 2E.

The main differences between Loongson 2E and Loongson 2F include:

1. Loongson 2F has an extra address window configuration module, which
   is used to map CPU address space to DDR or PCI address space, or map
   the PCI-DMA address space to DDR or LIO address space.

2. Loongson 2F supports 8 levels of software configurable CPu frequency
   which can be configured in the LOONGSON_CHIPCFG0 register.  The coming
   cpufreq and standby support are based on this feature.

Loongson.h abstracts the modules and corresponding methods are abstracted.

Add other Loongson-2F-specific source code including gcc 4.4 support, PCI
memory space, PCI IO space, DMA address.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

In Loongson2f IP6 is shared by bonito and perfcounters so we need to avoid
do_IRQ for perfcounter when the interrupt is from bonito.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

To share the same kernel image amon different machines we have added the
machtype command line support.

In the old serial port implementation the UART base address is hardcoded as
a macro in machine.h which breaks with machtype, so change that to discover
the address dynamically.  Also move the initialization of the UART base
address to uart_base.c to avoid remapping twice for early_printk.c and
serial.c.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/581/
Patchwork: http://patchwork.linux-mips.org/patch/682/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

To choose code for different machines by the value of machtype it needs to
be initialized as early as possible.  So move initialization of
mips_machtype to prom_init().
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

On SMP systems, the collection of statistics can cause cache line
bouncing in the lines associated with the counters.  Also there are
races incrementing the counters on multiple CPUs.

To fix both problems, we collect the statistics in per-CPU variables,
and add them up in the debugfs read operation.

As a test I ran the LTP float_bessel test on a 12 CPU Octeon system.

Without CONFIG_DEBUG_FS :             2602 seconds.
With CONFIG_DEBUG_FS:                 2640 seconds.
With non-cpu-local atomic statistics: 14569 seconds.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Addinitrd has been superseded by initramfs ages ago.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Enable hibernation support by default. Also enable sparsemem to avoid
the hibernation failures with flatmem and save memory wasted by flatmem.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Cc: yanh@lemote.com
Cc: huhb@lemote.com
Cc: Zhang Le <r0bertz@gentoo.org>
Cc: zhangfx@lemote.com
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The built-in Loongson 2E/2F northbridge in is bonito64-compatible but not
identical with it.  To avoid influencing the original bonito64 support and
make the loongson support more maintainable, it's better to separate the
Bonito64 code from the Loongson code.

This also prepares the kernel for the coming Loongson 2f machines family
support.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Cc: yanh@lemote.com
Cc: huhb@lemote.com
Cc: Zhang Le <r0bertz@gentoo.org>
Cc: zhangfx@lemote.com,
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch add serial port support for all of the existing loongson
family machines. most of the board specific part are put in serial.c,
and the base address of the serial ports are defined as macros in
machine.h for sharing it between serial.c and early_printk.c
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Cc: yanh@lemote.com
Cc: huhb@lemote.com
Cc: Zhang Le <r0bertz@gentoo.org>
Cc: zhangfx@lemote.com
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The uart_base variable here is not a physical address, so, we replace it
by unsigned char *.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Cc: yanh@lemote.com
Cc: huhb@lemote.com
Cc: Zhang Le <r0bertz@gentoo.org>
Cc: zhangfx@lemote.com
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Changes indention from whitespace to tabs in arch/mips/loongson/Kconfig.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Cc: yanh@lemote.com
Cc: huhb@lemote.com
Cc: Zhang Le <r0bertz@gentoo.org>
Cc: zhangfx@lemote.com
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Register reserved pages for Loongson family machines.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Cc: yanh@lemote.com,
Cc: huhb@lemote.com
Cc: Zhang Le <r0bertz@gentoo.org>
Cc: zhangfx@lemote.com,
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The function prom_init_cmdline() doesn't do anything, and nobody calls the
prom_getcmdline() function. Since these two are the only functions in the
file arch/mips/mipssim/sim_cmdline.c, the whole file can be removed now
along with the call to the no-op prom_init_cmdline() routine.
Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.com>
Patchwork: http://patchwork.linux-mips.org/patch/465/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Processors that support the mips64r2 ISA can in four instructions
convert a shifted PGD pointer stored in the upper bits of c0_context
into a usable pointer.  By doing this we save a memory load and
associated potential cache miss in the TLB exception handlers.

Since the upper bits of c0_context were holding the CPU number, we
move this to the upper bits of c0_xcontext which doesn't have enough
bits to hold the PGD pointer, but has plenty for the CPU number.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The octeon-ethernet driver shares an mdio bus with the octeon-mgmt
driver.  Here we convert the octeon-ethernet driver to use the PHY
Abstraction Layer.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The Octeon MGMT Ethernet ports are present in some members of the
Octeon SOC family (cn52XX and cn56XX have them).

The mdio bus connected to the MGMT PHYs is shared with the main
octeon-ethernet driver, we force it to be loaded first by calling
octeon_mdiobus_force_mod_depencency.  The platform devices for the
MGMT Ethernet ports are added in
arch/mips/cavium-octeon/octeon-platform.c, and the register
definitions for the ports live in arch/mips/include/asm/octeon/ along
with their ilk.

Although it currently is the only driver in drivers/net/octeon, the
directory was created looking forward to the day that octeon-ethernet
will move there from its current home in drivers/staging.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The Octeon SOC has two types of Ethernet ports, each type with its own
driver.  However, the PHYs for all the ports are controlled by a
common MDIO bus.  Because the mdio driver is not associated with a
particular driver, but is instead a system level resource, we create s
stand-alone driver for it.

As for the driver, we put the register definitions in
arch/mips/include/asm/octeon where most of the other Octeon register
definitions live.  This is a platform driver with the platform device
for "mdio-octeon" being registered in the platform startup code.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Reorder PT ops to avoid pipeline stalls.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The MIPS-specific macro CL_SIZE is merely aliasing the macro
COMMAND_LINE_SIZE. Other architectures use the latter; also,
COMMAND_LINE_SIZE is documented in kernel-parameters.txt, so
let's use it, and remove the alias.
Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Nobody is using the ARCS-specific prom_getcmdline(), so let's remove it.
Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch helps to generate smaller kernel images for linux-MIPS,

Here is the effect when using lzma:

$ ls -sh vmlinux
7.1M vmlinux
$ ls -sh vmlinuz
1.5M vmlinuz

Have tested the 32bit kernel on Qemu/Malta and 64bit kernel on FuLoong
Mini PC. both of them work well. and also, tested by Alexander Clouter
on an AR7 based Linksys WAG54Gv2, and by Manuel Lauss on an Alchemy
board.

This -v2 version incorporate the feedback from Ralf, and add the
following changes:

1. add .ecoff, .bin, .erec format support
2. only enable it and the debug source code for the machines we tested
3. a dozen of fixups and cleanups

and if you want to enable it for your board, please try to select
SYS_SUPPORTS_ZBOOT for it, and if the board have an 16550 compatible
uart, you can select SYS_SUPPORTS_ZBOOT_UART16550 directly. and then
sending the relative patches to Ralf.
Tested-by: NManuel Lauss <manuel.lauss@googlemail.com>
Tested-by: NAlexander Clouter <alex@digriz.org.uk>
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  XFS: Free buffer pages array unconditionally
  xfs: kill xfs_bmbt_rec_32/64 types
  xfs: improve metadata I/O merging in the elevator
  xfs: check for not fully initialized inodes in xfs_ireclaim

Commit 3d1e4631 ("get rid of init_file()") removed the export of
alloc_file() -- possibly inadvertently, since that commit mainly
consisted of deleting the lines between the end of alloc_file() and
the start of the code in init_file().

There is in fact one modular use of alloc_file() in the tree, in
drivers/infiniband/core/uverbs_main.c, so re-add the export to fix:

    ERROR: "alloc_file" [drivers/infiniband/core/ib_uverbs.ko] undefined!

when CONFIG_INFINIBAND_USER_ACCESS=m.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>