The user reports that he needs to add model=auto for audio to
work properly. In fact, since node 0x15 is not even a pin node,
the existing fixup is definitely wrong. Relevant information can
be found in the buglink below.

Cc: stable@kernel.org (3.2+)
BugLink: https://bugs.launchpad.net/bugs/918254Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The very same problem is seen on Haier W18 laptop with ALC861 as seen
on ASUS A6Rp, which was fixed by the commit 3b25eb69.
Now we just need to add a new SSID entry pointing to the same fixup.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42656

Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HP laptop models with buggy BIOS are apparently frequent, including
machines with different codecs. Set the polarity of the mute led based
on the SSID and include an entry for the HP Mini 110-3100.
Signed-off-by: NGustavo Maciel Dias Vieira <gustavo@sagui.org>
Tested-by: NPredrag Ivanovic <predivan@open.telekom.rs>
Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The refactoring of Realtek codec driver in 3.2 kernel caused a
regression for ASUS A6Rp laptop; it doesn't give any output.
The reason was that this machine has a secret master mute (or EAPD)
control via NID 0x0f VREF.  Setting VREF50 on this node makes the
sound working again.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588

Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If copy_from_user() does not return 0 we'll leak the memory we
allocated for 'params' when that variable goes out of scope.

Also a small CodingStyle cleanup: Use braces on both branches of
if/else when one branch needs it.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Acked-by: NVinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

- check SDAC bit of AC97 primary codec when create "rear" device 3,
  "4ch" device 2 and "4ch Duplication" switch as the card need a four channels
  AC97 codec to support surround40.
Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The recent change of the power-widget handling for IDT codecs caused
the silent output from the docking-station line-out jack.  This was
partially fixed by the commit f2cbba76
"ALSA: hda - Fix the lost power-setup of seconary pins after PM resume".
But the line-out on the docking-station is still silent when booted
with the jack plugged even by this fix.

The remainig bug is that the power-widget is set off in stac92xx_init()
because the pins in cfg->line_out_pins[] aren't checked there properly
but only hp_pins[] are checked in is_nid_hp_pin().

This patch fixes the problem by checking both HP and line-out pins
and leaving the power-map correctly.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42637

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The user reports that model=auto works fine for him. Using
model=auto bring in new features such as jack detection notification
to userspace.

Alsa info is available at http://paste.ubuntu.com/805351/Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit 2ae66c26
    ALSA: hda: option to enable arbitrary buffer/period sizes
introduced a regression on machines with Intel controller and Nvidia
HDMI.  The reason is that the driver modifies the global variable
align_buffer_size when an Intel controller is found, and the Nvidia
HDMI controller is probed after Intel although Nvidia chips require
the aligned buffers.

This patch fixes the problem by moving the flag into the local struct
so that it's not affected by other controllers.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42567

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Just overlooked.

sound/pci/hda/patch_realtek.c: In function ‘alc_sku_unsol_event’:
sound/pci/hda/patch_realtek.c:643:19: warning: unused variable ‘spec’ [-Wunused-variable]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

I have been told that this way the rear headphone connector is
working as well; with model=alienware only laptop speakers work.
The subsystem of both controller and codec is 1028:0490.
Signed-off-by: NAlbert Pool <albertpool@solcon.nl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now that all quirks have the own unsol handlers, we don't need to check
use_jack_tbl flag any more.  Let's kill it.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The recently added jack-kctl support sets the unsol event tags
dynamically, while static quirks usually set the fixed tags in the
init_verbs array.  Due to this conflict, the own unsol event handler
can't retrieve the tag and handle it properly any more.

For fixing this, avoid calling snd_hda_jack_add_kctls() for static
quirks, and always let them use own handlers instead of the standard
one for the auto-pareser.
Reported-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When a machine has multiple speakers, we don't need to create the
controls for multi-ios.  Check the number of primary outputs beforehand.

Note that this workaround might not work always with new codecs in
future; this assumes that both speakers and multi-io jacks share the
same mixers/DACs.  If they are routed with different mixers, the
individual mixer controls should be needed.  But, so far, this doesn't
happen with the existing ALC codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The two DACs for the front output and the surround/center/LFE/back
outputs are wired up out of phase, so when channels are duplicated,
their sound can cancel out each other and result in a weaker bass
response.  To fix this, reverse the polarity of the neutron flow to
the front output.
Reported-any-tested-by: NDaniel Hill <daniel@enemyplanet.geek.nz>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Cc: 2.6.34+ <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

- The maximum number of playback streams depend on the number of sample
  rate conveters (16) and the number of DMA channels (32).
Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

- Check SDAC bit of AC97 codec for supporting 4 channels playback.
Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

More than one user reports that changing the model from "both" to
"dmic" makes their Internal Mic work.

Cc: stable@kernel.org
Tested-by: NMartin Ling <martin-launchpad@earth.li>
BugLink: https://bugs.launchpad.net/bugs/795823Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

CONFIG_SND_COMPRESS_OFFLOAD is an item to be selected by the dirver
just like CONFIG_SND_PCM, and no need to prompt for explicit
selection.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Several users have reported "choppy" audio under the 3.2 kernel,
and that changing position_fix to 1 has resolved their problem.
The chip is an nVidia Corporation MCP89 High Definition Audio,
[10de:0d94] (rev a2).

Cc: stable@kernel.org (v3.2+)
BugLink: https://bugs.launchpad.net/bugs/909419Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Merge branch 'for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into topic/asoc

The DL1 PDM interface adds a little gain depending on the output device.
Add a method to retrieve the gain value for machine driver usage.
Signed-off-by: NLiam Girdwood <lrg@ti.com>

When multiple headphone or other detectable output pins are present,
the power-map has to be updated after resume appropriately, but the
current driver doesn't check all pins but only the first pin (since
it's enough to check it for the mute-behavior).  This resulted in the
silent output from the secondary outputs after PM resume.

This patch fixes the problem by checking all pins at (re-)init time.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=740347

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

All Xonar cards support S/PDIF input, but the cards without optical or
coaxial plugs have only undocumented pin connectors.  Support for the
ST/STX was already added in a previous patch; this adds support for the
D1/DX (JP2), DG (J5), DS (J5), and HDAV Slim (J12).

Many thanks to Zoltan Miklos for testing the DS and DX.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This card shares PCI ids with Chaintec AV710. Therefore, it will not be
detected automatically, it can only be activated by the module parameter
model=sq210a.
Signed-off-by: NPavel Hofman <pavel.hofman@ivitera.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When two different cards share the same PCI vendor/subvendor
identification, allow card info based on model only.
Do not require subvendor ID.
Signed-off-by: NPavel Hofman <pavel.hofman@ivitera.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add the capture pcm only if there is at least one ADC configured in
the SYSCONF register.
Signed-off-by: NPavel Hofman <pavel.hofman@ivitera.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Before, /proc/asound looked like this:

 2 [Default        ]: HDSPM - RME RayDAT_f1cd85
                      RME RayDAT S/N 0xf1cd85 at 0xf7300000, irq 18

In case of a second HDSPM card, its name would be Default_1. This is
cumbersome, because the order of the cards isn't stable across reboots.

To help userspace tools referring to the correct card, this commit
provides a unique id for each card:

 2 [HDSPMxf1cd85   ]: HDSPM - RME RayDAT_f1cd85
                      RME RayDAT S/N 0xf1cd85 at 0xf7300000, irq 18

In this example, userspace (configuration files) would then use
hw:HDSPMxf1cd85 to choose the right card.

The serial is masked to 24bits, so this string is always shorter than
sixteen chars.
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The device model needs a release() function so it can free devices when
they become dereferenced.  Do that for rtds.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

commit 739be96a "ASoC: Fix build dependency for SND_ATMEL_SOC_SSC"
introduces below build warnings:

drivers/misc/Kconfig:212:error: recursive dependency detected!
drivers/misc/Kconfig:212:       symbol ATMEL_SSC is selected by SND_ATMEL_SOC_SSC
sound/soc/atmel/Kconfig:9:      symbol SND_ATMEL_SOC_SSC is selected by SND_AT91_SOC_SAM9G20_WM8731
sound/soc/atmel/Kconfig:18:     symbol SND_AT91_SOC_SAM9G20_WM8731 depends on ATMEL_SSC

SND_ATMEL_SOC_SSC needs ATMEL_SSC to pass compilation.
This patch remove the "select ATMEL_SSC" from SND_ATMEL_SOC_SSC to avoid above
warnings. And then ensures all the machine drivers that select SND_ATMEL_SOC_SSC
need to depend on ATMEL_SSC.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Currently the driver checks only the out_mix_path[] for the primary
output route for judging whether to create the loopback-mixing control
or not.  But, there are cases where aamix-routing is available only on
headphone or speaker paths but not on the primary output path.  So, the
driver ignores such cases inappropriately.

This patch fixes the check of the loopback-mixing control by testing
all mix-routing paths.

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When an invalid NID is given, get_wcaps() returns zero as the error,
but get_wcaps_type() takes it as the normal value and returns a bogus
AC_WID_AUD_OUT value.  This confuses the parser.

With this patch, get_wcaps_type() returns -1 when value 0 is given,
i.e. an invalid NID is passed to get_wcaps().

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=740118

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These laptops can work well with the auto-parser and their BIOS setups,
and in addition, the auto-parser fixes the problem with S3/S4 where
the unsol event handling is killed after resume due to fallback to the
single-cmd mode.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=740115

Cc: <stable@kernel.org> [v3.1+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Dan Carpenter reported that setting 0 to uinfo->value.enumerated.items
in snd_asihpi_cmode_info() may lead to Oops.  This function should
return an error immediately in such a case instead.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Dan Carpenter reported that setting 0 to uinfo->value.enumerated.items
in snd_hdsp_info_pref_sync_ref() may lead to Oops.  This function should
return an error immediately in such a case instead.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This early 2011 model just need to have headphones on GPI02
instead of GPI01, and use BIOS pincfgs.
It is detected by codec SSID.
The iMac12,1 model is known to work the same way, although maybe
not with the same codec SSID.
Signed-off-by: NJérémy Lal <kapouer@melix.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>