Initialization of orig_fe_lun is moved to transport_init_se_cmd() from
transport_lookup_cmd_lun(). This helps for the cases where the SCSI request
fails before the call to transport_lookup_cmd_lun() so that
trace_target_cmd_complete() can print the LUN information to the trace
buffer. Due to this change, the lun parameter is removed from
transport_lookup_cmd_lun() and transport_lookup_tmr_lun().

Link: https://lore.kernel.org/r/1591559913-8388-3-git-send-email-sudhakar.panneerselvam@oracle.comReviewed-by: NMike Christie <michael.christie@oracle.com>
Signed-off-by: NSudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

target_setup_cmd_from_cdb() is called after a successful call to
transport_lookup_cmd_lun(). The new helper factors out the code that can be
called before the call to transport_lookup_cmd_lun(). This helper will be
used in an upcoming commit to address NULL pointer dereference.

Link: https://lore.kernel.org/r/1591559913-8388-2-git-send-email-sudhakar.panneerselvam@oracle.comReviewed-by: NMike Christie <michael.christie@oracle.com>
Signed-off-by: NSudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Link: https://lore.kernel.org/r/20200529234028.46373-4-viro@ZenIV.linux.org.ukAcked-by: NDon Brace <don.brace@microsemi.com>
Tested-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

No need for building a native struct on kernel stack, copying it to
userland one, then calling hpsa_ioctl() which copies it back into _another_
instance of the same struct.

Link: https://lore.kernel.org/r/20200529234028.46373-3-viro@ZenIV.linux.org.ukAcked-by: NDon Brace <don.brace@microsemi.com>
Tested-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

"BIG" in the name refers to the amount of data being transferred, _not_ the
size of structure itself; it's 140 or 144 bytes (for 32bit and 64bit hosts
resp.).  IOCTL_Command_struct is 136 or 144 bytes large...

No point whatsoever turning that into dynamic allocation, let alone vmalloc
one.  Just keep it as local variable...

Link: https://lore.kernel.org/r/20200529234028.46373-2-viro@ZenIV.linux.org.ukAcked-by: NDon Brace <don.brace@microsemi.com>
Tested-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Link: https://lore.kernel.org/r/20200529234028.46373-1-viro@ZenIV.linux.org.ukAcked-by: NDon Brace <don.brace@microsemi.com>
Tested-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In ufshcd_probe_hba(), all BKOP SW tracking variables can be reset together
in ufshcd_force_reset_auto_bkops(), thus urgent_bkop_lvl initialization in
the beginning of ufshcd_probe_hba() can be merged into
ufshcd_force_reset_auto_bkops().

Link: https://lore.kernel.org/r/20200530141200.4616-1-stanley.chu@mediatek.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Urgent bkops level is used to compare against actual bkops status read from
UFS device. Urgent bkops level is set during initialization and might be
updated in exception event handler during runtime. But it should not be
updated to the actual bkops status every time when auto bkops is toggled.
Otherwise, if urgent bkops level is updated to 0, auto bkops shall always
be kept enabled.

Link: https://lore.kernel.org/r/1590632686-17866-1-git-send-email-cang@codeaurora.org
Fixes: 24366c2a ("scsi: ufs: Recheck bkops level if bkops is disabled")
Reviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The variable rc is being initialized with a value that is never read and it
is being updated later with a new value.  The initialization is redundant
and can be removed.

Link: https://lore.kernel.org/r/20200527115242.172344-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix memset() accessing out of range address when reply_queue count is less
than RDPQ_MAX_INDEX_IN_ONE_CHUNK (i.e. 16) in non-RDPQ mode.

In non-RDPQ mode, the driver allocates a single contiguous pool of size
reply_queue's count * reqly_post_free_sz. But the driver is always
memsetting this pool with size 16 * reqly_post_free_sz. If reply queue
count is less than 16 (i.e. when MSI-X vectors enabled < 16), the driver is
accessing out of range address and this results in 'BUG: unable to handle
kernel paging request at fff0x...x' bug.

Make driver use dma_pool_zalloc() API to allocate and zero the pool.

Link: https://lore.kernel.org/r/20200528145617.27252-1-suganath-prabu.subramani@broadcom.com
Fixes: 8012209e ("scsi: mpt3sas: Handle RDPQ DMA allocation in same 4G region")
Signed-off-by: NSuganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

kobject_init_and_add() takes reference even when it fails. If this
function returns an error, kobject_put() must be called to properly
clean up the memory associated with the object.

Link: https://lore.kernel.org/r/20200528201353.14849-1-wu000273@umn.eduReviewed-by: NLee Duncan <lduncan@suse.com>
Signed-off-by: NQiushi Wu <wu000273@umn.edu>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

1) If remaining ring space before the end of the ring is smaller then the
   next cmd to write, tcmu writes a padding entry which fills the remaining
   space at the end of the ring.

   Then tcmu calls tcmu_flush_dcache_range() with the size of struct
   tcmu_cmd_entry as data length to flush.  If the space filled by the
   padding was smaller then tcmu_cmd_entry, tcmu_flush_dcache_range() is
   called for an address range reaching behind the end of the vmalloc'ed
   ring.

   tcmu_flush_dcache_range() in a loop calls
   flush_dcache_page(virt_to_page(start)); for every page being part of the
   range. On x86 the line is optimized out by the compiler, as
   flush_dcache_page() is empty on x86.

   But I assume the above can cause trouble on other architectures that
   really have a flush_dcache_page().  For paddings only the header part of
   an entry is relevant due to alignment rules the header always fits in
   the remaining space, if padding is needed.  So tcmu_flush_dcache_range()
   can safely be called with sizeof(entry->hdr) as the length here.

2) After it has written a command to cmd ring, tcmu calls
   tcmu_flush_dcache_range() using the size of a struct tcmu_cmd_entry as
   data length to flush.  But if a command needs many iovecs, the real size
   of the command may be bigger then tcmu_cmd_entry, so a part of the
   written command is not flushed then.

Link: https://lore.kernel.org/r/20200528193108.9085-1-bstroesser@ts.fujitsu.comAcked-by: NMike Christie <michael.christie@oracle.com>
Signed-off-by: NBodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix unwinding of pm_runtime changes when bailing out of driver probe due to
a failure and also on removal of driver.

Link: https://lore.kernel.org/r/20200526100340.15032-1-vigneshr@ti.com
Fixes: 6979e56c ("scsi: ufs: Add driver for TI wrapper for Cadence UFS IP")
Reported-by: NDinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: NVignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There wasn't any clean up done if cxgb3_alloc_atid() failed and also the
original code didn't release "csk->l2t".

Link: https://lore.kernel.org/r/20200521121221.GA247492@mwanda
Fixes: 6f7efaab ("[SCSI] cxgb3i: change cxgb3i to use libcxgbi")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix the following warning:

drivers/scsi/ibmvscsi/ibmvscsi.c:2387:12: warning: symbol
'ibmvscsi_module_init' was not declared. Should it be static?
drivers/scsi/ibmvscsi/ibmvscsi.c:2409:13: warning: symbol
'ibmvscsi_module_exit' was not declared. Should it be static?

Link: https://lore.kernel.org/r/20200520091036.247286-1-chentao107@huawei.comSigned-off-by: NChen Tao <chentao107@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

iSCSI suffers from a deadlock in case a management command submitted via
the netlink socket sleeps on an allocation while holding the rx_queue_mutex
if that allocation causes a memory reclaim that writebacks to a failed
iSCSI device.  The recovery procedure can never make progress to recover
the failed disk or abort outstanding IO operations to complete the reclaim
(since rx_queue_mutex is locked), thus locking the system.

Nevertheless, just marking all allocations under rx_queue_mutex as GFP_NOIO
(or locking the userspace process with something like PF_MEMALLOC_NOIO) is
not enough, since the iSCSI command code relies on other subsystems that
try to grab locked mutexes, whose threads are GFP_IO, leading to the same
deadlock. One instance where this situation can be observed is in the
backtraces below, stitched from multiple bugs reports, involving the kobj
uevent sent when a session is created.

The root of the problem is not the fact that iSCSI does GFP_IO allocations,
that is acceptable. The actual problem is that rx_queue_mutex has a very
large granularity, covering every unrelated netlink command execution at
the same time as the error recovery path.

The proposed fix leverages the recently added mechanism to stop failed
connections from the kernel, by enabling it to execute even though a
management command from the netlink socket is being run (rx_queue_mutex is
held), provided that the command is known to be safe.  It splits the
rx_queue_mutex in two mutexes, one protecting from concurrent command
execution from the netlink socket, and one protecting stop_conn from racing
with other connection management operations that might conflict with it.

It is not very pretty, but it is the simplest way to resolve the deadlock.
I considered making it a lock per connection, but some external mutex would
still be needed to deal with iscsi_if_destroy_conn.

The patch was tested by forcing a memory shrinker (unrelated, but used
bufio/dm-verity) to reclaim iSCSI pages every time
ISCSI_UEVENT_CREATE_SESSION happens, which is reasonable to simulate
reclaims that might happen with GFP_KERNEL on that path.  Then, a faulty
hung target causes a connection to fail during intensive IO, at the same
time a new session is added by iscsid.

The following stacktraces are stiches from several bug reports, showing a
case where the deadlock can happen.

 iSCSI-write
         holding: rx_queue_mutex
         waiting: uevent_sock_mutex

         kobject_uevent_env+0x1bd/0x419
         kobject_uevent+0xb/0xd
         device_add+0x48a/0x678
         scsi_add_host_with_dma+0xc5/0x22d
         iscsi_host_add+0x53/0x55
         iscsi_sw_tcp_session_create+0xa6/0x129
         iscsi_if_rx+0x100/0x1247
         netlink_unicast+0x213/0x4f0
         netlink_sendmsg+0x230/0x3c0

 iscsi_fail iscsi_conn_failure
         waiting: rx_queue_mutex

         schedule_preempt_disabled+0x325/0x734
         __mutex_lock_slowpath+0x18b/0x230
         mutex_lock+0x22/0x40
         iscsi_conn_failure+0x42/0x149
         worker_thread+0x24a/0xbc0

 EventManager_
         holding: uevent_sock_mutex
         waiting: dm_bufio_client->lock

         dm_bufio_lock+0xe/0x10
         shrink+0x34/0xf7
         shrink_slab+0x177/0x5d0
         do_try_to_free_pages+0x129/0x470
         try_to_free_mem_cgroup_pages+0x14f/0x210
         memcg_kmem_newpage_charge+0xa6d/0x13b0
         __alloc_pages_nodemask+0x4a3/0x1a70
         fallback_alloc+0x1b2/0x36c
         __kmalloc_node_track_caller+0xb9/0x10d0
         __alloc_skb+0x83/0x2f0
         kobject_uevent_env+0x26b/0x419
         dm_kobject_uevent+0x70/0x79
         dev_suspend+0x1a9/0x1e7
         ctl_ioctl+0x3e9/0x411
         dm_ctl_ioctl+0x13/0x17
         do_vfs_ioctl+0xb3/0x460
         SyS_ioctl+0x5e/0x90

 MemcgReclaimerD"
         holding: dm_bufio_client->lock
         waiting: stuck io to finish (needs iscsi_fail thread to progress)

         schedule at ffffffffbd603618
         io_schedule at ffffffffbd603ba4
         do_io_schedule at ffffffffbdaf0d94
         __wait_on_bit at ffffffffbd6008a6
         out_of_line_wait_on_bit at ffffffffbd600960
         wait_on_bit.constprop.10 at ffffffffbdaf0f17
         __make_buffer_clean at ffffffffbdaf18ba
         __cleanup_old_buffer at ffffffffbdaf192f
         shrink at ffffffffbdaf19fd
         do_shrink_slab at ffffffffbd6ec000
         shrink_slab at ffffffffbd6ec24a
         do_try_to_free_pages at ffffffffbd6eda09
         try_to_free_mem_cgroup_pages at ffffffffbd6ede7e
         mem_cgroup_resize_limit at ffffffffbd7024c0
         mem_cgroup_write at ffffffffbd703149
         cgroup_file_write at ffffffffbd6d9c6e
         sys_write at ffffffffbd6662ea
         system_call_fastpath at ffffffffbdbc34a2

Link: https://lore.kernel.org/r/20200520022959.1912856-1-krisman@collabora.comReported-by: NKhazhismel Kumykov <khazhy@google.com>
Reviewed-by: NLee Duncan <lduncan@suse.com>
Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently UFS host driver promises VCC supply if UFS device needs to do
WriteBooster flush during runtime suspend.

However the UFS specification mentions:

"While the flushing operation is in progress, the device is in Active power
mode."

Therefore UFS host driver needs to promise more: Keep UFS device as "Active
power mode", otherwise UFS device shall not do any flush if device enters
Sleep or PowerDown power mode.  Similarly, the same promises shall be
applied if device needs urgent BKOP during runtime suspend.

Fix this by not changing device power mode if WriteBooster flush or urgent
BKOP is required in ufshcd_suspend().

Now, if device finishes its job but is not resumed for a very long time,
system will have unnecessary power drain because VCC is still supplied. A
method to re-check the threshold of keeping VCC supply is required to fix
the power drain. However, the threshold re-check needs to re-activate the
link first because the decision depends on the latest device status.

Also introduce a delayed work to force runtime resume after a certain delay
during runtime suspend. This makes threshold re-check happen natually in
the entry of the next runtime-suspend. The device can continue its
WriteBooster flush or urgent BKOP jobs soon after resumed if device has no
upcoming requests and link enters hibern8 state either by Auto-Hibern8 or
hibern8 during clk-gating scheme. This solution not only prevents power
drain but also makes as much use of time as possible for device's
background jobs.

Link: https://lore.kernel.org/r/20200522083212.4008-5-stanley.chu@mediatek.comReviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

For WriteBooster feature related attributes, the index used by query shall
be LUN ID if LU Dedicated buffer mode is enabled.

Link: https://lore.kernel.org/r/20200522083212.4008-4-stanley.chu@mediatek.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Reviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

According to the UFS specification, WriteBooster is officially supported by
UFS 2.2.

Since UFS 2.2 specification has been finalized in JEDEC and such devices
have also showed up in the market, modify the checking rule for
ufshcd_wb_probe() to allow these devices to enable WriteBooster.

Link: https://lore.kernel.org/r/20200522083212.4008-3-stanley.chu@mediatek.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Reviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The whole UFS host instance has been zero-initialized by scsi_host_alloc(),
thus UFS driver does not need to clear "dev_info" member specifically in
ufshcd_device_params_init().

Simply remove the unnecessary code.

Link: https://lore.kernel.org/r/20200522083212.4008-2-stanley.chu@mediatek.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Reviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

ufs_qcom_dump_dbg_regs() uses usleep_range, a sleeping function, but can be
called from atomic context in the following flow:

ufshcd_intr -> ufshcd_sl_intr -> ufshcd_check_errors ->
ufshcd_print_host_regs -> ufshcd_vops_dbg_register_dump ->
ufs_qcom_dump_dbg_regs

This causes a boot crash on the Lenovo Miix 630 when the interrupt is
handled on the idle thread.

Fix the issue by switching to udelay().

Link: https://lore.kernel.org/r/20200525204125.46171-1-jeffrey.l.hugo@gmail.com
Fixes: 9c46b867 ("scsi: ufs-qcom: dump additional testbus registers")
Reviewed-by: NBean Huo <beanhuo@micron.com>
Reviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

For non RDPQ mode, the driver allocates a single contiguous block of memory
pool for all reply descriptor post queues and passes down a single address
in the ReplyDescriptorPostQueueAddress field of the IOC Init Request
Message to the firmware. So reply_post queue will have only one entry which
holds the address of this single contiguous block of memory pool.

While allocating the reply descriptor post queue pool, driver should loop
only once in non-RDPQ mode. But the driver is looping for
ioc->reply_queue_count number of times even though reply_post queue's queue
depth is only one in non-RDPQ mode. This leads to 'BUG: KASAN:
use-after-free in base_alloc_rdpq_dma_pool'.

The fix is to loop only once while allocating memory for the reply
descriptor post queue in non-RDPQ mode

Fixes: 8012209e ("scsi: mpt3sas: Handle RDPQ DMA allocation in same 4G region")
Link: https://lore.kernel.org/r/20200522103558.5710-1-suganath-prabu.subramani@broadcom.comReported-by: NTomas Henzl <thenzl@redhat.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NSuganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In order to create or activate a new node, lpfc_els_unsol_buffer() invokes
lpfc_nlp_init() or lpfc_enable_node() or lpfc_nlp_get(), all of them will
return a reference of the specified lpfc_nodelist object to "ndlp" with
increased refcnt.

When lpfc_els_unsol_buffer() returns, local variable "ndlp" becomes
invalid, so the refcount should be decreased to keep refcount balanced.

The reference counting issue happens in one exception handling path of
lpfc_els_unsol_buffer(). When "ndlp" in DEV_LOSS, the function forgets to
decrease the refcnt increased by lpfc_nlp_init() or lpfc_enable_node() or
lpfc_nlp_get(), causing a refcnt leak.

Fix this issue by calling lpfc_nlp_put() when "ndlp" in DEV_LOSS.

Link: https://lore.kernel.org/r/1590416184-52592-1-git-send-email-xiyuyang19@fudan.edu.cnReviewed-by: NDaniel Wagner <dwagner@suse.de>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NXiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: NXin Tan <tanxin.ctf@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The pr_debug() dereferences "cmd" after we already freed it by calling
tcmu_free_cmd(cmd).  The debug printk needs to be done earlier.

Link: https://lore.kernel.org/r/20200523101129.GB98132@mwanda
Fixes: 61fb2482 ("scsi: target: tcmu: Userspace must not complete queued commands")
Reviewed-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: NDavid Disseldorp <ddiss@suse.de>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

vhost-scsi pre-allocates the maximum sg entries per command and if a
command requires more than VHOST_SCSI_PREALLOC_SGLS entries, then that
command is failed by it. This patch lets vhost communicate the max sg limit
when it registers vhost_scsi_ops with TCM. With this change, TCM would
report the max sg entries through "Block Limits" VPD page which will be
typically queried by the SCSI initiator during device discovery. By knowing
this limit, the initiator could ensure the maximum transfer length is less
than or equal to what is reported by vhost-scsi.

Link: https://lore.kernel.org/r/1590166317-953-1-git-send-email-sudhakar.panneerselvam@oracle.com
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NSudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The function always returns QLA_SUCCESS and the caller qla2x00_start_sp()
doesn't even evalute the return value. So there is no point in returning a
status.

Link: https://lore.kernel.org/r/20200520130819.90625-1-dwagner@suse.deReviewed-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NRoman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: NDaniel Wagner <dwagner@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This was detected by building the qla2xxx driver with clang. See also
commit a9083016 ("[SCSI] qla2xxx: Add ISP82XX support").

Link: https://lore.kernel.org/r/20200520040738.1017-1-bvanassche@acm.org
Cc: Arun Easi <aeasi@marvell.com>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: NRoman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch enables setting cpu affinity through "cpumask" for iscsi
workqueues (iscsi_q_xx and iscsi_eh), so as to get performance isolation.

The max number of active worker was changed form 1 to 2, because "cpumask"
of ordered workqueue isn't allowed to change.

Link: https://lore.kernel.org/r/20200505011908.15538-1-bob.liu@oracle.comReviewed-by: NLee Duncan <lduncan@suse.com>
Signed-off-by: NBob Liu <bob.liu@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch is in response to a static analyser report from Dan Carpenter
titled: "[bug report] scsi: scsi_debug: Add per_host_store option".  This
code may not clear the static analyzer reports, but may shed light on why
they occur. Amongst other things this driver has a table driven SCSI
command parser which also involves some C code. There are some invariants
between the table entries and the corresponding C code (i.e. the resp_*()
functions) that, if broken, may lead to a NULL dereference.  And the report
is valid, at least in the case of the PRE-FETCH command.  Alas, that is not
one of the cases that the static analyzer reported.

In this particular corner case: when the fake_rw flag is set and the table
entry for a "store"-accessing command does not have the required F_FAKE_RW
flag set, do the following. Call BUG_ON() in the devip2sip() very close to
a comment block explaining why it was called and how to fix it.
checkpatch.pl complains about the BUG_ON() but there is no reasonable
remedial action that can be taken at run time.

This change allows the code reported by the static analyzer to be
simplified. Comments were also added to the table flags (e.g.  F_FAKE_RW)
so developers who add commands might be more inclined to use them
(properly).

Link: https://lore.kernel.org/r/20200513013943.25285-1-dgilbert@interlog.comReported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

shost->tag_set is used too many times, introduce temporary parameter
tag_set instead of &shost->tag_set.

Link: https://lore.kernel.org/r/20200518074732.39679-1-yebin10@huawei.comReviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NYe Bin <yebin10@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

shost_for_each_device(sdev, shost) \
	for ((sdev) = __scsi_iterate_devices((shost), NULL); \
	     (sdev); \
	     (sdev) = __scsi_iterate_devices((shost), (sdev)))

When terminating shost_for_each_device() iteration with break or return,
scsi_device_put() should be used to prevent stale scsi device references
from being left behind.

Link: https://lore.kernel.org/r/20200518074420.39275-1-yebin10@huawei.comReviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NYe Bin <yebin10@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix all endianness complaints reported by sparse (C=2) without affecting
the behavior of the code on little endian CPUs.

Link: https://lore.kernel.org/r/20200518211712.11395-16-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Annotate members of FC protocol and firmware dump data structures as big
endian. Annotate members of RISC control structures as little endian.
Annotate mailbox registers as little endian. Annotate the mb[] arrays as
CPU-endian because communication of the mb[] values with the hardware
happens through the readw() and writew() functions. readw() converts from
__le16 to u16 and writew() converts from u16 to __le16. Annotate 'handles'
as CPU-endian because for the firmware these are opaque values.

Link: https://lore.kernel.org/r/20200518211712.11395-15-bvanassche@acm.org
CC: Hannes Reinecke <hare@suse.de>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Link: https://lore.kernel.org/r/20200518211712.11395-14-bvanassche@acm.org
Cc: Arun Easi <aeasi@marvell.com>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Martin Wilck <mwilck@suse.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: NRoman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Casting a pointer to void * and relying on an implicit cast from void *
to uint16_t or uint32_t suppresses sparse warnings about endianness. Hence
cast explicitly to uint16_t and uint32_t. Additionally, remove superfluous
void * casts.

Link: https://lore.kernel.org/r/20200518211712.11395-13-bvanassche@acm.org
Cc: Arun Easi <aeasi@marvell.com>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This was suggested by Daniel Wagner.

Link: https://lore.kernel.org/r/20200518211712.11395-12-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: NArun Easi <aeasi@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Make the MMIO accessors strongly typed such that the compiler checks
whether the accessor function is used that matches the register width. Fix
those MMIO accesses where another number of bits was read or written than
the size of the register.

Link: https://lore.kernel.org/r/20200518211712.11395-11-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Make qla27xx_write_remote_reg() easier to read by using register names
instead of register offsets. The 'pahole' tool has been used to convert
register offsets into register names. See also commit cbb01c2f ("scsi:
qla2xxx: Fix MPI failure AEN (8200) handling").

Link: https://lore.kernel.org/r/20200518211712.11395-10-bvanassche@acm.org
Cc: Arun Easi <aeasi@marvell.com>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch does not change any functionality.

Link: https://lore.kernel.org/r/20200518211712.11395-9-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NArun Easi <aeasi@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch fixes the following Coverity complaint without changing any
functionality:

CID 337793 (#1 of 1): Wrong size argument (SIZEOF_MISMATCH)
suspicious_sizeof: Passing argument ha->fcp_prio_cfg of type
struct qla_fcp_prio_cfg * and argument 32768UL to function memset is
suspicious because a multiple of sizeof (struct qla_fcp_prio_cfg) /*48*/
is expected.

memset(ha->fcp_prio_cfg, 0, FCP_PRIO_CFG_SIZE);

Link: https://lore.kernel.org/r/20200518211712.11395-8-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>