Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch switches 4K Linux page size config to use pte_t * type
instead of struct page * for pgtable_t. This simplifies the code a lot
and helps in consolidating both 64K and 4K page allocator routines. The
changes should not have any impact, because we already store physical
address in the upper level page table tree and that implies we already
do struct page * to physical address conversion.

One change to note here is we move the pgtable_page_dtor() call for
nohash to pte_fragment_free_mm(). The nohash related change is due to
the related changes in pgtable_64.c.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Only code cleanup. No functionality change.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Simplify the code by dropping 4-level page table #ifdef. We are always
4-level now.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This reverts pgalloc related changes WRT implementing 4-level page
table for 64K Linux page size and storing of physical address in higher
level page tables since they are only applicable to book3s64 variant
and we now have a separate copy for book3s64. This helps to keep these
headers simpler.

Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This moves the nohash variant of pgalloc headers to nohash/ directory
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch start to make a book3s variant for pgalloc headers. We have
multiple book3s specific changes such as:
  * 4 level page table
  * store physical address in higher level table
  * use pte_t * for pgtable_t

Having a book3s64 specific variant helps to keep code simpler and remove
lots of #ifdef around code.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Hash needs special get_unmapped_area() handling because of limitations
around base page size, so we have to set HAVE_ARCH_UNMAPPED_AREA.

With radix we don't have such restrictions, so we could use the generic
code. But because we've set HAVE_ARCH_UNMAPPED_AREA (for hash), we have
to re-implement the same logic as the generic code.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

On return from RTAS we access the paca variables and we have 64 bit
disabled. This requires us to limit paca in 32 bit range.

Fix this by setting ppc64_rma_size to first_memblock_size/1G range.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Radix doesn't need slice support. Catch incorrect usage of slice code
when radix is enabled.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We also use MMU_FTR_RADIX to branch out from code path specific to
hash.

No functionality change.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We are going to add asm changes in the follow up patches. Add the
feature bit now so that we can get it all build.

mpe: When CONFIG_PPC_RADIX_MMU=n we omit MMU_FTR_RADIX from the
MMU_FTRS_POSSIBLE mask. This allows the compiler to work out that those
checks will always be false and so the code can be elided completely.

Note we do *not* define MMU_FTR_RADIX to 0 in the RADIX_MMU=n case,
because that doesn't work with the ASM_FTR patching. In particular an
IF_SET section will result in a mask and value of zero, which is always
true, meaning the section *won't* be patched, which is the opposite of
what we want.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: NBalbir Singh <bsingharora@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Follow the example of the cpu feature code, and add a mask of possible
MMU features, MMU_FTRS_POSSIBLE.

This is used in mmu_has_feature(), which allows the possible mask to act
as a shortcut for any features that are not possible, but still allows
the feature bit itself to be defined.

We will use this in the next commit to allow MMU_FTR_RADIX checks to be
elided when MMU_FTR_RADIX is not possible.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Core kernel doesn't track the page size of the VA range that we are
invalidating. Hence we end up flushing TLB for the entire mm here. Later
patches will improve this.

We also don't flush page walk cache separetly instead use RIC=2 when
flushing TLB, because we do a MMU gather flush after freeing page table.

MMU_NO_CONTEXT is updated for hash.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This file now contains both hash and radix specific code. Rename it to
indicate this better.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

How we switch MMU context differs between hash and radix. For hash we
need to switch the SLB details and for radix we need to switch the PID
SPR.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

For hash we create vmemmap mapping using bolted hash page table entries.
For radix we fill the radix page table. The next patch will add the
radix details for creating vmemmap mappings.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This adds routines for early setup for radix. We use device tree
property "ibm,processor-radix-AP-encodings" to find supported page
sizes. If we don't find the above we consider 64K and 4K as supported
page sizes.

We do map vmemap using 2M page size if we can. The linear mapping is
done such that we use required page size for that range. For example
memory of 3.5G is mapped such that we use 1G mapping till 3G range and
use 2M mapping for the rest.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This only does 64K Linux page support for now. 64K hash Linux config
THP needs to differentiate it from hugetlb huge page because with THP we
need to track hash pte slot information with respect to each subpage.
This is not needed with hugetlb hugepage, because we don't do MPSS with
hugetlb.

Radix doesn't have any such restrictions.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Here we create pgtable-64/4k.h and move pmd accessors that are common
between hash and radix there. We can't do much sharing with 4K Linux
page size because 4K Linux page size with hash config doesn't support
THP. So for now it is empty. In later patches we will add functions that
does conditional hash/radix accessors there.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

For those pte accessors, that operate on a different set of pte bits
between hash/radix, we add a generic variant that does a conditional
to hash linux or radix variant.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In this patch we add the radix Kconfig and conditional check.
radix_enabled() is written to always return 0 here. Once we have all
needed radix changes added, we will update this to an mmu_feature check.

We need to add this early so that we can get it all build in the early
stage.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This adds Power ISA 3.0 specific pte defines. We share most of the
details with hash Linux page table format. This patch indicates only
things where we differ.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Only code movement. No functionality change.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: NBalbir Singh <bsingharora@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Now that the page table size is a variable, we can move these to
generic pgtable.h.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Radix and hash MMU models support different page table sizes. Make
the #defines a variable so that existing code can work with variable
sizes.

Slice related code is only used by hash, so use hash constants there. We
will replicate some of the boundary conditions with resepct to TASK_SIZE
using radix values too. Right now we do boundary condition check using
hash constants.

Swapper pgdir size is initialized in asm code. We select the max pgd
size to keep it simple. For now we select hash pgdir. When adding radix
we will switch that to radix pgdir which is 64K.

BUILD_BUG_ON check which is removed is already done in hugepage_init()
using MAYBE_BUILD_BUG_ON().
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

These pte functions will remain the same between radix and hash. Move
them to pgtable.h.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Now that we have moved book3s hash64 Linux pte bits to match Power ISA
3.0 radix pte bit positions, we move the matching pte bits to a common
header.

Only code movement in this patch. No functionality change.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

I am splitting this as a separate patch to get better review. If ok
we should merge this with previous patch.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This helps to make following hash only pte bits easier.

We have kept _PAGE_CHG_MASK, _HPAGE_CHG_MASK and _PAGE_PROT_BITS as it
is in this patch eventhough they use hash specific bits. Using them in
radix as it is should be ok, because with radix we expect those bit
positions to be zero.

Only renames in this patch, no change in functionality.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch reduces the number of #ifdefs in C code and will also help in
adding radix changes later. Only code movement in this patch.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Propagate copyrights and update GPL text]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

PowerISA 3.0 adds a parition table indexed by LPID. Parition table
allows us to specify the MMU model that will be used for guest and host
translation.

This patch adds support with SLB based hash model (UPRT = 0). What is
required with this model is to support the new hash page table entry
format and also setup partition table such that we use hash table for
address translation.

We don't have segment table support yet.

In order to make sure we don't load KVM module on Power9 (since we don't
have kvm support yet) this patch also disables KVM on Power9.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Add structs and #defines related to the radix MMU partition table
format. We also add a ppc_md callback for updating a partition table
entry.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Start moving code that is generic between radix and hash to book3s64
specific headers from the book3s64 hash specific one.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>