- 25 4月, 2018 1 次提交
-
-
由 Willem de Bruijn 提交于
Updates to the bitfields in struct packet_sock are not atomic. Serialize these read-modify-write cycles. Move po->running into a separate variable. Its writes are protected by po->bind_lock (except for one startup case at packet_create). Also replace a textual precondition warning with lockdep annotation. All others are set only in packet_setsockopt. Serialize these updates by holding the socket lock. Analogous to other field updates, also hold the lock when testing whether a ring is active (pg_vec). Fixes: 8dc41944 ("[PACKET]: Add optional checksum computation for recvmsg") Reported-by: NDaeRyong Jeong <threeearcat@gmail.com> Reported-by: NByoungyoung Lee <byoungyoung@purdue.edu> Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 4月, 2018 1 次提交
-
-
由 Eric Dumazet 提交于
In order to remove the race caught by syzbot [1], we need to lock the socket before using po->tp_version as this could change under us otherwise. This means lock_sock() and release_sock() must be done by packet_set_ring() callers. [1] : BUG: KMSAN: uninit-value in packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249 CPU: 0 PID: 20195 Comm: syzkaller707632 Not tainted 4.16.0+ #83 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249 packet_setsockopt+0x12c6/0x5a90 net/packet/af_packet.c:3662 SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849 SyS_setsockopt+0x76/0xa0 net/socket.c:1828 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x449099 RSP: 002b:00007f42b5307ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 000000000070003c RCX: 0000000000449099 RDX: 0000000000000005 RSI: 0000000000000107 RDI: 0000000000000003 RBP: 0000000000700038 R08: 000000000000001c R09: 0000000000000000 R10: 00000000200000c0 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000080eecf R14: 00007f42b53089c0 R15: 0000000000000001 Local variable description: ----req_u@packet_setsockopt Variable was created at: packet_setsockopt+0x13f/0x5a90 net/packet/af_packet.c:3612 SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849 Fixes: f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation.") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 3月, 2018 1 次提交
-
-
由 Kirill Tkhai 提交于
Synchronous pernet_operations are not allowed anymore. All are asynchronous. So, drop the structure member. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 2月, 2018 2 次提交
-
-
由 Kirill Tkhai 提交于
These pernet_operations just create and destroy /proc entry, and another operations do not touch it. Also, nobody else are interested in foreign net::packet::sklist. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Acked-by: NAndrei Vagin <avagin@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denys Vlasenko 提交于
Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 2月, 2018 1 次提交
-
-
由 Linus Torvalds 提交于
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 1月, 2018 1 次提交
-
-
由 Alexey Dobriyan 提交于
/proc has been ignoring struct file_operations::owner field for 10 years. Specifically, it started with commit 786d7e16 ("Fix rmmod/read/write races in /proc entries"). Notice the chunk where inode->i_fop is initialized with proxy struct file_operations for regular files: - if (de->proc_fops) - inode->i_fop = de->proc_fops; + if (de->proc_fops) { + if (S_ISREG(inode->i_mode)) + inode->i_fop = &proc_reg_file_ops; + else + inode->i_fop = de->proc_fops; + } VFS stopped pinning module at this point. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 12月, 2017 1 次提交
-
-
由 Steffen Klassert 提交于
This patch implements asynchronous crypto callbacks and a backlog handler that can be used when IPsec is done at layer 2 in the TX path. It also extends the skb validate functions so that we can update the driver transmit return codes based on async crypto operation or to indicate that we queued the packet in a backlog queue. Joint work with: Aviv Heller <avivh@mellanox.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 29 11月, 2017 2 次提交
-
-
由 Eric Dumazet 提交于
syzbot reported crashes [1] and provided a C repro easing bug hunting. When/if packet_do_bind() calls __unregister_prot_hook() and releases po->bind_lock, another thread can run packet_notifier() and process an NETDEV_UP event. This calls register_prot_hook() and hooks again the socket right before first thread is able to grab again po->bind_lock. Fixes this issue by temporarily setting po->num to 0, as suggested by David Miller. [1] dev_remove_pack: ffff8801bf16fa80 not found ------------[ cut here ]------------ kernel BUG at net/core/dev.c:7945! ( BUG_ON(!list_empty(&dev->ptype_all)); ) invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: device syz0 entered promiscuous mode CPU: 0 PID: 3161 Comm: syzkaller404108 Not tainted 4.14.0+ #190 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801cc57a500 task.stack: ffff8801cc588000 RIP: 0010:netdev_run_todo+0x772/0xae0 net/core/dev.c:7945 RSP: 0018:ffff8801cc58f598 EFLAGS: 00010293 RAX: ffff8801cc57a500 RBX: dffffc0000000000 RCX: ffffffff841f75b2 RDX: 0000000000000000 RSI: 1ffff100398b1ede RDI: ffff8801bf1f8810 device syz0 entered promiscuous mode RBP: ffff8801cc58f898 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801bf1f8cd8 R13: ffff8801cc58f870 R14: ffff8801bf1f8780 R15: ffff8801cc58f7f0 FS: 0000000001716880(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020b13000 CR3: 0000000005e25000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:106 tun_detach drivers/net/tun.c:670 [inline] tun_chr_close+0x49/0x60 drivers/net/tun.c:2845 __fput+0x333/0x7f0 fs/file_table.c:210 ____fput+0x15/0x20 fs/file_table.c:244 task_work_run+0x199/0x270 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x9bb/0x1ae0 kernel/exit.c:865 do_group_exit+0x149/0x400 kernel/exit.c:968 SYSC_exit_group kernel/exit.c:979 [inline] SyS_exit_group+0x1d/0x20 kernel/exit.c:977 entry_SYSCALL_64_fastpath+0x1f/0x96 RIP: 0033:0x44ad19 Fixes: 30f7ea1c ("packet: race condition in packet_bind") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Cc: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Maloney 提交于
syzkaller found a race condition fanout_demux_rollover() while removing a packet socket from a fanout group. po->rollover is read and operated on during packet_rcv_fanout(), via fanout_demux_rollover(), but the pointer is currently cleared before the synchronization in packet_release(). It is safer to delay the cleanup until after synchronize_net() has been called, ensuring all calls to packet_rcv_fanout() for this socket have finished. To further simplify synchronization around the rollover structure, set po->rollover in fanout_add() only if there are no errors. This removes the need for rcu in the struct and in the call to packet_getsockopt(..., PACKET_ROLLOVER_STATS, ...). Crashing stack trace: fanout_demux_rollover+0xb6/0x4d0 net/packet/af_packet.c:1392 packet_rcv_fanout+0x649/0x7c8 net/packet/af_packet.c:1487 dev_queue_xmit_nit+0x835/0xc10 net/core/dev.c:1953 xmit_one net/core/dev.c:2975 [inline] dev_hard_start_xmit+0x16b/0xac0 net/core/dev.c:2995 __dev_queue_xmit+0x17a4/0x2050 net/core/dev.c:3476 dev_queue_xmit+0x17/0x20 net/core/dev.c:3509 neigh_connected_output+0x489/0x720 net/core/neighbour.c:1379 neigh_output include/net/neighbour.h:482 [inline] ip6_finish_output2+0xad1/0x22a0 net/ipv6/ip6_output.c:120 ip6_finish_output+0x2f9/0x920 net/ipv6/ip6_output.c:146 NF_HOOK_COND include/linux/netfilter.h:239 [inline] ip6_output+0x1f4/0x850 net/ipv6/ip6_output.c:163 dst_output include/net/dst.h:459 [inline] NF_HOOK.constprop.35+0xff/0x630 include/linux/netfilter.h:250 mld_sendpack+0x6a8/0xcc0 net/ipv6/mcast.c:1660 mld_send_initial_cr.part.24+0x103/0x150 net/ipv6/mcast.c:2072 mld_send_initial_cr net/ipv6/mcast.c:2056 [inline] ipv6_mc_dad_complete+0x99/0x130 net/ipv6/mcast.c:2079 addrconf_dad_completed+0x595/0x970 net/ipv6/addrconf.c:4039 addrconf_dad_work+0xac9/0x1160 net/ipv6/addrconf.c:3971 process_one_work+0xbf0/0x1bc0 kernel/workqueue.c:2113 worker_thread+0x223/0x1990 kernel/workqueue.c:2247 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:432 Fixes: 0648ab70 ("packet: rollover prepare: per-socket state") Fixes: 509c7a1e ("packet: avoid panic in packet_getsockopt()") Reported-by: Nsyzbot <syzkaller@googlegroups.com> Signed-off-by: NMike Maloney <maloney@google.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 11月, 2017 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 14 11月, 2017 1 次提交
-
-
由 Vasily Averin 提交于
Be sure that packet.sklist initialized in net_init hook was return to initial state. Signed-off-by: NVasily Averin <vvs@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 10月, 2017 1 次提交
-
-
由 Kees Cook 提交于
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Mike Maloney <maloney@google.com> Cc: Jarno Rajahalme <jarno@ovn.org> Cc: netdev@vger.kernel.org Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 10月, 2017 1 次提交
-
-
由 Eric Dumazet 提交于
syzkaller got crashes in packet_getsockopt() processing PACKET_ROLLOVER_STATS command while another thread was managing to change po->rollover Using RCU will fix this bug. We might later add proper RCU annotations for sparse sake. In v2: I replaced kfree(rollover) in fanout_add() to kfree_rcu() variant, as spotted by John. Fixes: a9b63918 ("packet: rollover statistics") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: John Sperbeck <jsperbeck@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 9月, 2017 2 次提交
-
-
由 Willem de Bruijn 提交于
Packet socket option po->has_vnet_hdr can be updated concurrently with other operations if no ring is attached. Do not test the option twice in packet_snd, as the value may change in between calls. A race on setsockopt disable may cause a packet > mtu to be sent without having GSO options set. Fixes: bfd5f4a3 ("packet: Add GSO/csum offload support.") Signed-off-by: NWillem de Bruijn <willemb@google.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
Once a socket has po->fanout set, it remains a member of the group until it is destroyed. The prot_hook must be constant and identical across sockets in the group. If fanout_add races with packet_do_bind between the test of po->fanout and taking the lock, the bind call may make type or dev inconsistent with that of the fanout group. Hold po->bind_lock when testing po->fanout to avoid this race. I had to introduce artificial delay (local_bh_enable) to actually observe the race. Fixes: dc99f600 ("packet: Add fanout support.") Signed-off-by: NWillem de Bruijn <willemb@google.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 9月, 2017 1 次提交
-
-
由 Allen Pais 提交于
Use setup_timer function instead of initializing timer with the function and data fields. Signed-off-by: NAllen Pais <allen.lkml@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 9月, 2017 1 次提交
-
-
由 Willem de Bruijn 提交于
Packet socket bind operations must hold the po->bind_lock. This keeps po->running consistent with whether the socket is actually on a ptype list to receive packets. fanout_add unbinds a socket and its packet_rcv/tpacket_rcv call, then binds the fanout object to receive through packet_rcv_fanout. Make it hold the po->bind_lock when testing po->running and rebinding. Else, it can race with other rebind operations, such as that in packet_set_ring from packet_rcv to tpacket_rcv. Concurrent updates can result in a socket being added to a fanout group twice, causing use-after-free KASAN bug reports, among others. Reported independently by both trinity and syzkaller. Verified that the syzkaller reproducer passes after this patch. Fixes: dc99f600 ("packet: Add fanout support.") Reported-by: Nnixioaming <nixiaoming@huawei.com> Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 8月, 2017 1 次提交
-
-
由 Benjamin Poirier 提交于
... which may happen with certain values of tp_reserve and maclen. Fixes: 58d19b19 ("packet: vnet_hdr support for tpacket_rcv") Signed-off-by: NBenjamin Poirier <bpoirier@suse.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 8月, 2017 1 次提交
-
-
由 Willem de Bruijn 提交于
Updates to tp_reserve can race with reads of the field in packet_set_ring. Avoid this by holding the socket lock during updates in setsockopt PACKET_RESERVE. This bug was discovered by syzkaller. Fixes: 8913336a ("packet: add PACKET_RESERVE sockopt") Reported-by: NAndrey Konovalov <andreyknvl@google.com> Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 7月, 2017 1 次提交
-
-
由 WANG Cong 提交于
There are multiple reports showing we have a use-after-free in the timer prb_retire_rx_blk_timer_expired(), where we use struct tpacket_kbdq_core::pkbdq, a pg_vec, after it gets freed by free_pg_vec(). The interesting part is it is not freed via packet_release() but via packet_setsockopt(), which means we are not closing the socket. Looking into the big and fat function packet_set_ring(), this could happen if we satisfy the following conditions: 1. closing == 0, not on packet_release() path 2. req->tp_block_nr == 0, we don't allocate a new pg_vec 3. rx_ring->pg_vec is already set as V3, which means we already called packet_set_ring() wtih req->tp_block_nr > 0 previously 4. req->tp_frame_nr == 0, pass sanity check 5. po->mapped == 0, never called mmap() In this scenario we are clearing the old rx_ring->pg_vec, so we need to free this pg_vec, but we don't stop the timer on this path because of closing==0. The timer has to be stopped as long as we need to free pg_vec, therefore the check on closing!=0 is wrong, we should check pg_vec!=NULL instead. Thanks to liujian for testing different fixes. Reported-by: alexander.levin@verizon.com Reported-by: NDave Jones <davej@codemonkey.org.uk> Reported-by: Nliujian (CE) <liujian56@huawei.com> Tested-by: Nliujian (CE) <liujian56@huawei.com> Cc: Ding Tianhong <dingtianhong@huawei.com> Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 7月, 2017 1 次提交
-
-
由 Rosen, Rami 提交于
This patch removes the definition of PGV_FROM_VMALLOC from af_packet.c. The PGV_FROM_VMALLOC definition was already removed by commit 441c793a ("net: cleanup unused macros in net directory"), and its usage was removed even before by commit c56b4d90 ("af_packet: remove pgv.flags"); but it was added back by mistake later on, in commit f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation"). Signed-off-by: NRami Rosen <rami.rosen@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 7月, 2017 1 次提交
-
-
由 Iván Briano 提交于
When PACKET_QDISC_BYPASS is not used, Tx queue selection will be done before the packet is enqueued, taking into account any mappings set by a queuing discipline such as mqprio without hardware offloading. This selection may be affected by a previously saved queue_mapping, either on the Rx path, or done before the packet reaches the device, as it's currently the case for AF_PACKET. In order for queue selection to work as expected when using traffic control, there can't be another selection done before that point is reached, so move the call to packet_pick_tx_queue to packet_direct_xmit, leaving the default xmit path as it was before PACKET_QDISC_BYPASS was introduced. A forward declaration of packet_pick_tx_queue() is introduced to avoid the need to reorder the functions within the file. Fixes: d346a3fa ("packet: introduce PACKET_QDISC_BYPASS socket option") Signed-off-by: NIván Briano <ivan.briano@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 7月, 2017 3 次提交
-
-
由 Reshetova, Elena 提交于
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: NElena Reshetova <elena.reshetova@intel.com> Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com> Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NDavid Windsor <dwindsor@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Reshetova, Elena 提交于
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. This patch uses refcount_inc_not_zero() instead of atomic_inc_not_zero_hint() due to absense of a _hint() version of refcount API. If the hint() version must be used, we might need to revisit API. Signed-off-by: NElena Reshetova <elena.reshetova@intel.com> Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com> Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NDavid Windsor <dwindsor@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Reshetova, Elena 提交于
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: NElena Reshetova <elena.reshetova@intel.com> Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com> Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NDavid Windsor <dwindsor@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 6月, 2017 1 次提交
-
-
由 Rosen, Rami 提交于
This patch removes unneeded forward declaration of tpacket_snd() in net/packet/af_packet.c. Signed-off-by: NRami Rosen <rami.rosen@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 5月, 2017 1 次提交
-
-
由 Rosen, Rami 提交于
This patch removes unused parameter from prb_curr_blk_in_use() method in net/packet/af_packet.c. Signed-off-by: NRami Rosen <rami.rosen@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 5月, 2017 1 次提交
-
-
When using a TX ring buffer, if an error occurs processing a control message (e.g. invalid message), the net_device reference is not released. Fixes c14ac945 ("sock: enable timestamping using control messages") Signed-off-by: NDouglas Caetano dos Santos <douglascs@taghos.com.br> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 4月, 2017 1 次提交
-
-
由 Alexander Potapenko 提交于
In the case getsockopt() is called with PACKET_HDRLEN and optlen < 4 |val| remains uninitialized and the syscall may behave differently depending on its value, and even copy garbage to userspace on certain architectures. To fix this we now return -EINVAL if optlen is too small. This bug has been detected with KMSAN. Signed-off-by: NAlexander Potapenko <glider@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 4月, 2017 1 次提交
-
-
由 Mike Maloney 提交于
Fanout uses a per net global namespace. A process that intends to create a new fanout group can accidentally join an existing group. It is not possible to detect this. Add socket option PACKET_FANOUT_FLAG_UNIQUEID. When specified the supplied fanout group id must be set to 0, and the kernel chooses an id that is not already in use. This is an ephemeral flag so that other sockets can be added to this group using setsockopt, but NOT specifying this flag. The current getsockopt(..., PACKET_FANOUT, ...) can be used to retrieve the new group id. We assume that there are not a lot of fanout groups and that this is not a high frequency call. The method assigns ids starting at zero and increases until it finds an unused id. It keeps track of the last assigned id, and uses it as a starting point to find new ids. Signed-off-by: NMike Maloney <maloney@google.com> Acked-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 3月, 2017 3 次提交
-
-
由 Andrey Konovalov 提交于
When calculating po->tp_hdrlen + po->tp_reserve the result can overflow. Fix by checking that tp_reserve <= INT_MAX on assign. Signed-off-by: NAndrey Konovalov <andreyknvl@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrey Konovalov 提交于
When calculating rb->frames_per_block * req->tp_block_nr the result can overflow. Add a check that tp_block_size * tp_block_nr <= UINT_MAX. Since frames_per_block <= tp_block_size, the expression would never overflow. Signed-off-by: NAndrey Konovalov <andreyknvl@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrey Konovalov 提交于
Subtracting tp_sizeof_priv from tp_block_size and casting to int to check whether one is less then the other doesn't always work (both of them are unsigned ints). Compare them as is instead. Also cast tp_sizeof_priv to u64 before using BLK_PLUS_PRIV, as it can overflow inside BLK_PLUS_PRIV otherwise. Signed-off-by: NAndrey Konovalov <andreyknvl@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 3月, 2017 1 次提交
-
-
由 Alexander Potapenko 提交于
KMSAN (KernelMemorySanitizer, a new error detection tool) reports use of uninitialized memory in packet_bind_spkt(): Acked-by: NEric Dumazet <edumazet@google.com> ================================================================== BUG: KMSAN: use of unitialized memory CPU: 0 PID: 1074 Comm: packet Not tainted 4.8.0-rc6+ #1891 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 0000000000000000 ffff88006b6dfc08 ffffffff82559ae8 ffff88006b6dfb48 ffffffff818a7c91 ffffffff85b9c870 0000000000000092 ffffffff85b9c550 0000000000000000 0000000000000092 00000000ec400911 0000000000000002 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff82559ae8>] dump_stack+0x238/0x290 lib/dump_stack.c:51 [<ffffffff818a6626>] kmsan_report+0x276/0x2e0 mm/kmsan/kmsan.c:1003 [<ffffffff818a783b>] __msan_warning+0x5b/0xb0 mm/kmsan/kmsan_instr.c:424 [< inline >] strlen lib/string.c:484 [<ffffffff8259b58d>] strlcpy+0x9d/0x200 lib/string.c:144 [<ffffffff84b2eca4>] packet_bind_spkt+0x144/0x230 net/packet/af_packet.c:3132 [<ffffffff84242e4d>] SYSC_bind+0x40d/0x5f0 net/socket.c:1370 [<ffffffff84242a22>] SyS_bind+0x82/0xa0 net/socket.c:1356 [<ffffffff8515991b>] entry_SYSCALL_64_fastpath+0x13/0x8f arch/x86/entry/entry_64.o:? chained origin: 00000000eba00911 [<ffffffff810bb787>] save_stack_trace+0x27/0x50 arch/x86/kernel/stacktrace.c:67 [< inline >] kmsan_save_stack_with_flags mm/kmsan/kmsan.c:322 [< inline >] kmsan_save_stack mm/kmsan/kmsan.c:334 [<ffffffff818a59f8>] kmsan_internal_chain_origin+0x118/0x1e0 mm/kmsan/kmsan.c:527 [<ffffffff818a7773>] __msan_set_alloca_origin4+0xc3/0x130 mm/kmsan/kmsan_instr.c:380 [<ffffffff84242b69>] SYSC_bind+0x129/0x5f0 net/socket.c:1356 [<ffffffff84242a22>] SyS_bind+0x82/0xa0 net/socket.c:1356 [<ffffffff8515991b>] entry_SYSCALL_64_fastpath+0x13/0x8f arch/x86/entry/entry_64.o:? origin description: ----address@SYSC_bind (origin=00000000eb400911) ================================================================== (the line numbers are relative to 4.8-rc6, but the bug persists upstream) , when I run the following program as root: ===================================== #include <string.h> #include <sys/socket.h> #include <netpacket/packet.h> #include <net/ethernet.h> int main() { struct sockaddr addr; memset(&addr, 0xff, sizeof(addr)); addr.sa_family = AF_PACKET; int fd = socket(PF_PACKET, SOCK_PACKET, htons(ETH_P_ALL)); bind(fd, &addr, sizeof(addr)); return 0; } ===================================== This happens because addr.sa_data copied from the userspace is not zero-terminated, and copying it with strlcpy() in packet_bind_spkt() results in calling strlen() on the kernel copy of that non-terminated buffer. Signed-off-by: NAlexander Potapenko <glider@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 2月, 2017 1 次提交
-
-
由 Anoob Soman 提交于
Commit 66644982 ("packet: call fanout_release, while UNREGISTERING a netdev"), unfortunately, introduced the following issues. 1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside rcu_read-side critical section. rcu_read_lock disables preemption, most often, which prohibits calling sleeping functions. [ ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section! [ ] [ ] rcu_scheduler_active = 1, debug_locks = 0 [ ] 4 locks held by ovs-vswitchd/1969: [ ] #0: (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40 [ ] #1: (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch] [ ] #2: (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20 [ ] #3: (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0 [ ] [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110 [ ] [<ffffffff810a2da7>] ___might_sleep+0x57/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30 [ ] [<ffffffff81186e88>] ? printk+0x4d/0x4f [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock). "sleeping function called from invalid context" [ ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810a2f52>] ___might_sleep+0x202/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 3. calling dev_remove_pack(&fanout->prot_hook), from inside spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack() -> synchronize_net(), which might sleep. [ ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002 [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff81186274>] __schedule_bug+0x64/0x73 [ ] [<ffffffff8162b8cb>] __schedule+0x6b/0xd10 [ ] [<ffffffff8162c5db>] schedule+0x6b/0x80 [ ] [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410 [ ] [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810 [ ] [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10 [ ] [<ffffffff8154eab5>] synchronize_net+0x35/0x50 [ ] [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20 [ ] [<ffffffff8161077e>] fanout_release+0xbe/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 4. fanout_release() races with calls from different CPU. To fix the above problems, remove the call to fanout_release() under rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to __fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure fanout->prot_hook is removed as well. Fixes: 66644982 ("packet: call fanout_release, while UNREGISTERING a netdev") Reported-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NAnoob Soman <anoob.soman@citrix.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 2月, 2017 1 次提交
-
-
由 Eric Dumazet 提交于
Multiple threads can call fanout_add() at the same time. We need to grab fanout_mutex earlier to avoid races that could lead to one thread freeing po->rollover that was set by another thread. Do the same in fanout_release(), for peace of mind, and to help us finding lockdep issues earlier. Fixes: dc99f600 ("packet: Add fanout support.") Fixes: 0648ab70 ("packet: rollover prepare: per-socket state") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 2月, 2017 1 次提交
-
-
由 Willem de Bruijn 提交于
Link layer protocols may unconditionally pull headers, as Ethernet does in eth_type_trans. Ensure that the entire link layer header always lies in the skb linear segment. tpacket_snd has such a check. Extend this to packet_snd. Variable length link layer headers complicate the computation somewhat. Here skb->len may be smaller than dev->hard_header_len. Round up the linear length to be at least as long as the smallest of the two. Reported-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NWillem de Bruijn <willemb@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 1月, 2017 1 次提交
-
-
由 Jason Wang 提交于
Commit 501db511 ("virtio: don't set VIRTIO_NET_HDR_F_DATA_VALID on xmit") in fact disables VIRTIO_HDR_F_DATA_VALID on receiving path too, fixing this by adding a hint (has_data_valid) and set it only on the receiving path. Cc: Rolf Neugebauer <rolf.neugebauer@docker.com> Signed-off-by: NJason Wang <jasowang@redhat.com> Acked-by: NRolf Neugebauer <rolf.neugebauer@docker.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 1月, 2017 1 次提交
-
-
由 Daniel Borkmann 提交于
When TX timestamping is in use with TPACKET_V3's TX ring, then we'll hit the BUG() in __packet_set_timestamp() when ring buffer slot is returned to user space via tpacket_destruct_skb(). This is due to v3 being assumed as unreachable here, but since 7f953ab2 ("af_packet: TX_RING support for TPACKET_V3") it's not anymore. Fix it by filling the timestamp back into the ring slot. Fixes: 7f953ab2 ("af_packet: TX_RING support for TPACKET_V3") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-