The public backref walking functions have quite a lot of arguments that
are passed down the call stack to find_parent_nodes(), the core function
of the backref walking code.

The next patches in series will need to add even arguments to these
functions that should be passed not only to find_parent_nodes(), but also
to other functions used by the later (directly or even lower in the call
stack).

So create a structure to hold all these arguments and state used by the
main backref walking function, find_parent_nodes(), and use it as the
argument for the public backref walking functions iterate_extent_inodes(),
btrfs_find_all_leafs() and btrfs_find_all_roots().
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The interface for find_parent_nodes() has two extent offset related
arguments:

1) One u64 pointer argument for the extent offset;

2) One boolean argument to tell if the extent offset should be ignored or
   not.

These are confusing, becase the extent offset pointer can be NULL and in
some cases callers pass a NULL value as a way to tell the backref walking
code to ignore offsets in file extent items (and simply consider all file
extent items that point to the target data extent).

The boolean argument was added in commit c995ab3c ("btrfs: add a flag
to iterate_inodes_from_logical to find all extent refs for uncompressed
extents"), but it was never really necessary, it was enough if it could
find a way to get a NULL value passed to the "extent_item_pos" argument of
find_parent_nodes(). The arguments are also passed to functions called
by find_parent_nodes() and respective helper functions, which further
makes everything more complicated than needed.

Then we have several backref walking related functions that end up calling
find_parent_nodes(), either directly or through some other function that
they call, and for many we have to use an "extent_item_pos" (u64) argument
and a boolean "ignore_offset" argument too.

This is confusing and not really necessary. So use a single argument to
specify the extent offset, as a simple u64 and not as a pointer, but
using a special value of (u64)-1, defined as a documented constant, to
indicate when the extent offset should be ignored.

This is also preparation work for the upcoming patches in the series that
add other arguments to find_parent_nodes() and other related functions
that use it.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently send does not do the best decisions when it comes to decide
between multiple clone sources, which results in clone operations for
partial extent ranges, which has the following disadvantages:

1) We get less shared extents at the destination;

2) We have to read more data during the send operation and emit more
   write commands.

Besides not being optimal behaviour, it also breaks user expectations and
is often reported by users, with a recent example in the Link tag at the
bottom of this change log.

Part of the reason for this non-optimal behaviour is that the backref
walking code does not provide information about the length of the file
extent items that were found for each backref, so send is blind about
which backref is the best to chose as a cloning source.

The other existing reasons are just silliness, namely always prefering
the inode with the lowest number when multiple are found for the same
root and when we can clone from multiple roots, always prefer the send
root over any of the other clone roots. This does not make any sense
since any inode or root is fine and as good as any other inode/root.

Fix this by making backref walking pass information about the number of
bytes referenced by each file extent item and then have send's backref
callback pick the inode with the highest number of bytes for each root.
Finally select the root from which we can clone more bytes from.

Example reproducer:

   $ cat test.sh
   #!/bin/bash

   DEV=/dev/sdi
   MNT=/mnt/sdi

   mkfs.btrfs -f $DEV
   mount $DEV $MNT

   xfs_io -f -c "pwrite -S 0xab -b 2M 0 2M" $MNT/foo
   cp --reflink=always $MNT/foo $MNT/bar
   cp --reflink=always $MNT/foo $MNT/baz
   sync

   # Overwrite the second half of file foo.
   xfs_io -c "pwrite -S 0xcd -b 1M 1M 1M" $MNT/foo
   sync

   echo
   echo "*** fiemap in the original filesystem ***"
   echo
   xfs_io -c "fiemap -v" $MNT/foo
   xfs_io -c "fiemap -v" $MNT/bar
   xfs_io -c "fiemap -v" $MNT/baz
   echo

   btrfs filesystem du $MNT

   btrfs subvolume snapshot -r $MNT $MNT/snap

   btrfs send -f /tmp/send_stream $MNT/snap

   umount $MNT
   mkfs.btrfs -f $DEV &> /dev/null
   mount $DEV $MNT

   btrfs receive -f /tmp/send_stream $MNT

   echo
   echo "*** fiemap in the new filesystem ***"
   echo
   xfs_io -r -c "fiemap -v" $MNT/snap/foo
   xfs_io -r -c "fiemap -v" $MNT/snap/bar
   xfs_io -r -c "fiemap -v" $MNT/snap/baz
   echo

   btrfs filesystem du $MNT

   rm -f /tmp/send_stream
   rm -f /tmp/snap.fssum

   umount $MNT

Before this change:

   $ ./test.sh
   (...)

   *** fiemap in the original filesystem ***

   /mnt/sdi/foo:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..2047]:       26624..28671      2048 0x2000
      1: [2048..4095]:    30720..32767      2048   0x1
   /mnt/sdi/bar:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..4095]:       26624..30719      4096 0x2001
   /mnt/sdi/baz:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..4095]:       26624..30719      4096 0x2001

        Total   Exclusive  Set shared  Filename
      2.00MiB     1.00MiB           -  /mnt/sdi/foo
      2.00MiB       0.00B           -  /mnt/sdi/bar
      2.00MiB       0.00B           -  /mnt/sdi/baz
      6.00MiB     1.00MiB     2.00MiB  /mnt/sdi

   Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap'
   At subvol /mnt/sdi/snap
   At subvol snap

   *** fiemap in the new filesystem ***

   /mnt/sdi/snap/foo:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..4095]:       26624..30719      4096 0x2001
   /mnt/sdi/snap/bar:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..2047]:       26624..28671      2048 0x2000
      1: [2048..4095]:    30720..32767      2048   0x1
   /mnt/sdi/snap/baz:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..2047]:       26624..28671      2048 0x2000
      1: [2048..4095]:    32768..34815      2048   0x1

        Total   Exclusive  Set shared  Filename
      2.00MiB       0.00B           -  /mnt/sdi/snap/foo
      2.00MiB     1.00MiB           -  /mnt/sdi/snap/bar
      2.00MiB     1.00MiB           -  /mnt/sdi/snap/baz
      6.00MiB     2.00MiB           -  /mnt/sdi/snap
      6.00MiB     2.00MiB     2.00MiB  /mnt/sdi

We end up with two 1M extents that are not shared for files bar and baz.

After this change:

   $ ./test.sh
   (...)

   *** fiemap in the original filesystem ***

   /mnt/sdi/foo:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..2047]:       26624..28671      2048 0x2000
      1: [2048..4095]:    30720..32767      2048   0x1
   /mnt/sdi/bar:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..4095]:       26624..30719      4096 0x2001
   /mnt/sdi/baz:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..4095]:       26624..30719      4096 0x2001

        Total   Exclusive  Set shared  Filename
      2.00MiB     1.00MiB           -  /mnt/sdi/foo
      2.00MiB       0.00B           -  /mnt/sdi/bar
      2.00MiB       0.00B           -  /mnt/sdi/baz
      6.00MiB     1.00MiB     2.00MiB  /mnt/sdi
   Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap'
   At subvol /mnt/sdi/snap
   At subvol snap

   *** fiemap in the new filesystem ***

   /mnt/sdi/snap/foo:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..4095]:       26624..30719      4096 0x2001
   /mnt/sdi/snap/bar:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..2047]:       26624..28671      2048 0x2000
      1: [2048..4095]:    30720..32767      2048 0x2001
   /mnt/sdi/snap/baz:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..2047]:       26624..28671      2048 0x2000
      1: [2048..4095]:    30720..32767      2048 0x2001

        Total   Exclusive  Set shared  Filename
      2.00MiB       0.00B           -  /mnt/sdi/snap/foo
      2.00MiB       0.00B           -  /mnt/sdi/snap/bar
      2.00MiB       0.00B           -  /mnt/sdi/snap/baz
      6.00MiB       0.00B           -  /mnt/sdi/snap
      6.00MiB       0.00B     3.00MiB  /mnt/sdi

Now there's a much better sharing, files bar and baz share 1M of the
extent of file foo and the second extent of files bar and baz is shared
between themselves.

This will later be turned into a test case for fstests.

Link: https://lore.kernel.org/linux-btrfs/20221008005704.795b44b0@crass-HP-ZBook-15-G2/Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

At find_extent_clone(), unless we are given an inline extent, a file
extent item that represents hole or an extent that starts beyond the
i_size, we always do backref walking to look for clone sources, unless
if we have more than SEND_MAX_EXTENT_REFS (64) known references on the
extent.

However if we know we only have one reference in the extent item and only
one clone source (the send root), then it's pointless to do the backref
walking to search for clone sources, as we can't clone from any other
root. So skip the backref walking in that case.

The following test was run on a non-debug kernel (Debian's default kernel
config):

   $ cat test.sh
   #!/bin/bash

   DEV=/dev/sdi
   MNT=/mnt/sdi

   mkfs.btrfs -f $DEV
   mount $DEV $MNT

   # Create an extent tree that's not too small and none of the
   # extents is shared.
   for ((i = 1; i <= 50000; i++)); do
      xfs_io -f -c "pwrite 0 4K" $MNT/file_$i > /dev/null
      echo -ne "\r$i files created..."
   done
   echo

   btrfs subvolume snapshot -r $MNT $MNT/snap

   start=$(date +%s%N)
   btrfs send $MNT/snap > /dev/null
   end=$(date +%s%N)

   dur=$(( (end - start) / 1000000 ))
   echo -e "\nsend took $dur milliseconds"

   umount $MNT

Before this change:

   send took 5389 milliseconds

After this change:

   send took 4519 milliseconds  (-16.1%)
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

At find_extent_clone() we are initializing to zero the 'found_itself' and
'found' fields of the backref context before we use it but we have already
initialized the structure to zeroes when we declared it on stack, so it's
pointless to initialize those fields and they are unnecessarily increasing
the object text size with two "mov" instructions (x86_64).

Similarly make the 'extent_len' initialization more clear by using an if-
-then-else instead of a double assignment to it in case the extent's end
crosses the i_size boundary.

Before this change:

   $ size fs/btrfs/send.o
      text	   data	    bss	    dec	    hex	filename
     68694	   4252	     16	  72962	  11d02	fs/btrfs/send.o

After this change:

   $ size fs/btrfs/send.o
      text	   data	    bss	    dec	    hex	filename
     68678	   4252	     16	  72946	  11cf2	fs/btrfs/send.o
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We have this unclear comment at find_extent_clone() about extents starting
at a file offset greater than or equals to the i_size of the inode. It's
not really informative and it's misleading, since it mentions the author
found such extents with snapshots and large files.

Such extents are a result of fallocate with FALLOC_FL_KEEP_SIZE and there
is no relation to snapshots or large files (all write paths update the
i_size before inserting a new file extent item). So update the comment to
be precise about it and why we don't bother looking for clone sources in
that case.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When looking for an extent clone, at find_extent_clone(), we start by
allocating a path and then check for cases where we can't have clones
and exit immediately in those cases. It's a waste of time to allocate
the path before those cases, so reorder the logic so that we check for
those cases before allocating the path.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since we have switched all raid56 workload to submit-and-wait method,
there is no use for btrfs_fs_info::endio_raid56_workers workqueue and
btrfs_raid_bio::end_io_work.

Remove them to save some memory.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This switch involves the following changes:

- Make finish_parity_scrub() only to submit the write bios
  It will no longer call rbio_orig_end_io(), and now it will
  return error.

- Add a new helper, recover_scrub_rbio(), to handle recovery
  It's just doing extra scrub related checks, and then call
  recover_sectors().

- Rename raid56_parity_scrub_stripe() to scrub_rbio()
- Rename scrub_parity_work() to scrub_rbio_work_locked()
  To follow the existing naming scheme.

- Delete unused functions
  Including:
  * finish_rmw()
  * raid_write_end_io()
  * raid56_bio_end_io()
  * __raid_recover_end_io()
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Just like what we did for write/recovery, also extract the read bio
assembly code into a helper for scrub.

The difference between the three are:

- rmw_assemble_read_bios() only submit reads for missing sectors
  Thus it will skip cached sectors, but will also read sectors which
  is not covered by any full stripe. (For cache usage)

- recover_assemble_read_bios() reads every sector which has not failed

- scrub_assemble_read_bios() has extra check for vertical stripes
  It's mostly the same as rmw_assemble_read_bios(), but will skip
  sectors which is not covered by a vertical stripe.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This includes the following changes:

- Implement new raid_unplug() functions
  Now we don't need a workqueue to run the plug, as all our
  work is just queue rmw_rbio_work() call, which can be executed
  without sleep.

- Implement a rmw_rbio_work_locked() helper
  This is for unlock_stripe(), which is already holding the full stripe
  lock.

- Remove all the old functions
  This should already shows how complex the old functions are, as we
  ended up removing the following functions:

  * rmw_work()
  * validate_rbio_for_rmw()
  * raid56_rmw_end_io_work()
  * raid56_rmw_stripe()
  * full_stripe_write()
  * partial_stripe_write()
  * __raid56_parity_write()
  * run_plug()
  * unplug_work()
  * btrfs_raid_unplug()
  * rmw_work()
  * __raid56_parity_recover()
  * raid_recover_end_io_work()

- Unexport rmw_rbio()
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The new entrance will be called rmw_rbio(), it will have a streamlined
workflow by using submit-and-wait method.

Thus there will be no weird jumps between tons of functions, thus way
more reader friendly, and will make later expansion easier, as it's now
a straight workflow, the timing is way more clear.

Unfortunately we can not yet migrate the RMW path to use this new
entrance as we still need extra work to address the plug and
unlock_stripe() function.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The helper will be later used to refactor the rmw write path.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The helper will later be used to refactor the whole RMW path.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently btrfs uses end_io functions to jump between different stages
of recovery.

For example, we go the following different functions:

- raid56_bio_end_io()
  This handles the read for all the sectors (except the missing device).

- __raid_recover_end_io()
  This does the real work, it's called inside the delayed work function
  raid_recover_end_io_work().

This one recovery path involves at least 3 different functions, which is
a big burden for readers.

This patch will change the behavior by:

- Introduce a unified recovery entrance, recover_rbio()

- Use submit-and-wait method
  So the workflow is not interrupted by the endio function jump.
  This doesn't bring performance change, but reduce the burden for
  reviewers.

- Run the main function in the rmw_workers workqueue
  Now raid56_parity_recover() only needs to setup the work, and
  queue the work using start_async_work().

Now readers only need to do one function jump (start_async_work()) to
find out the main entrance of recovery path.

Furthermore, recover_rbio() function can easily be reused by other paths.

The old recovery path is still utilized by degraded write path.
It will be cleaned up when we have migrated the write path.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This includes extra changes:

- The allocation for unmap_array[] and pointers[]
  Now we allocate them in one go, and free them together.

- Remove @err
  Use errno_to_blk_status(ret) instead.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This new helper will be also utilized in the incoming refactor of
recovery path.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently finish_rmw() will update the P/Q stripes before submitting
the writes.

It's done behind a for(;;) loop, it's a little congested indent-wise, so
extract the code into a helper called generate_pq_vertical().
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This refactor includes the following behavior change first:

- Don't error out if only P/Q is corrupted

  The old code will directly error out if only P/Q is corrupted.
  Although it is an logical error if we go into rebuild path with
  only P/Q corrupted, there is no need to error out.

  Just skip the rebuild and return the already good data.

Then comes the following refactor which shouldn't cause behavior
changes:

- Introduce a helper to do vertical stripe recovery

  This not only reduce one indent level, but also paves the road for
  later data checksum verification in RMW cycles.

- Sort rbio->faila/b before recovery

  So we don't need to do the same swap every vertical stripe

- Replace a BUG_ON() with ASSERT()

  Or checkpatch won't let me pass.

- Mark recovered sectors uptodate after the recover loop

- Do the cleanup for pointers unconditionally

  We only need to initialize @pointers and @unmap_array to NULL, so
  we can safely free them unconditionally.

- Mark the repaired sector uptodate in recover_vertical()
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The two structures appear on the same call paths, btrfs_bio_ctrl is
embedded in extent_page_data and we pass bio_ctrl to some functions.
After merging there are fewer indirections and we have only one control
structure. The packing remains same.

The btrfs_bio_ctrl was selected as the target structure as the operation
is closer to bio processing.

Structure layout:

struct btrfs_bio_ctrl {
        struct bio *               bio;                  /*     0     8 */
        int                        mirror_num;           /*     8     4 */
        enum btrfs_compression_type compress_type;       /*    12     4 */
        u32                        len_to_stripe_boundary; /*    16     4 */
        u32                        len_to_oe_boundary;   /*    20     4 */
        btrfs_bio_end_io_t         end_io_func;          /*    24     8 */
        bool                       extent_locked;        /*    32     1 */
        bool                       sync_io;              /*    33     1 */

        /* size: 40, cachelines: 1, members: 8 */
        /* padding: 6 */
        /* last cacheline: 40 bytes */
};
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The semantics of the two members is a boolean, so change the type
accordingly.  We have space in extent_page_data due to alignment there's
no change in size.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The div_factor* helpers calculate fraction or percentage fraction. The
name is a bit confusing, we use it only for percentage calculations and
there are two helpers.

There's a helper mult_frac that's for general fractions, that tries to
be accurate but we multiply and divide by small numbers so we can use
the div_u64 helper.

Rename the div_factor* helpers and use 1..100 percentage range, also drop
the case checking for percentage == 100, it's never hit.

The conversions:

* div_factor calculates tenths and the numbers need to be adjusted
* div_factor_fine is direct replacement
Signed-off-by: NDavid Sterba <dsterba@suse.com>

If when doing a direct IO write we need to fallback to buffered IO, we
this comment at btrfs_direct_write() that says we can't directly fallback
to buffered IO if we have a NOWAIT iocb, because we have no support for
NOWAIT buffered writes. That is not true anymore, as support for NOWAIT
buffered writes was added recently in commit 926078b2 ("btrfs: enable
nowait async buffered writes").

However we still can't fallback to a buffered write in case we have a
NOWAIT iocb, because we'll need to flush delalloc and wait for it to
complete after doing the buffered write, and that can block for several
reasons, the main reason being waiting for IO to complete.

So update the comment to mention all that.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The header files should use the /* */ comment style, introduced in
commit f3a84ccd ("btrfs: move the tree mod log code into its own
file").
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently we have inline extent read code behind two levels of
indentation, factor them them out into a new function,
read_inline_extent(), to make it a little easier to read.

Since we're here, also remove @extent_offset and @pg_offset arguments
from uncompress_inline() function, as it's not possible to have inline
extents at non-inline file offset.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The argument @new_inline changes the following members of extent_map:

- em->compress_type
- EXTENT_FLAG_COMPRESSED of em->flags

However neither members makes a difference for inline extents:

- Inline extent read never use above em members

  As inside btrfs_get_extent() we directly use the file extent item to
  do the read.

- Inline extents are never to be split

  Thus code really needs em->compress_type or that flag will never be
  executed on inlined extents.
  (btrfs_drop_extent_cache() would be one example)

- Fiemap no longer relies on extent maps

  Recent fiemap optimization makes fiemap to search subvolume tree
  directly, without using any extent map at all.

  Thus those members make no difference for inline extents any more.

Furthermore such exception without much explanation is really a source
of confusion.

Thus this patch will completely remove the argument, and always set the
involved members, unifying the behavior.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently for inline extents read inside btrfs_get_extent(), we will
reset several extent map members:

- em->start

  Reset to extent_start, which is completely unnecessary.
  The extent_start and em->start should have already be zero, ensured by
  tree-checker already.

- em->len

  Reset the round_up(copy_size, fs_info->sectorsize), which is again
  unnecessary.

- em->orig_block_len

  Reset to em->len (sectorsize), while it is originally unset from
  btrfs_extent_item_to_extent_map().

  This makes no difference, as all extent map handling paths will
  ignore the orig_block_len if they found it's an inlined extent.

  Such inline extent orig_block_len ignoring examples can be found in
  btrfs_drop_extent_cache().

- em->orig_start

  Reset to em->start (0), while it is originally set to EXTENT_MAP_HOLE.

  This makes no difference either, as all extent map handling paths will
  ignore the em->orig_start if they found it's an inline extent.

Thus all these em members resetting are unnecessary.

Replace them with ASSERT()s checking the only two members (block_start
and length) that make sense.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently we calculate inline extent read in a way that inline extent
can start at non-zero offset.

This is consistent with the inode selftests, which puts an inline extent
at file offset 5.

Meanwhile the inline extent creation code will only create inline extent
at file offset 0.

Furthermore with the introduction of tree-checker on file extents, we are
actively rejecting inline extent which starts at non-zero file offset.
And so far we haven't yet seen any report of rejected inline extents at
non-zero file offset.

This all means, the extra calculation to support inline extents at
non-zero file offset is mostly paper weight, and damaging the
readability of the code.

Thus this patch will:

- Add extra ASSERT()s to make sure involved file offset are all 0

- Remove @extent_offset calculation

- Simplify the involved code
  As several variables are now single-use, no need to declare them as
  a variable anymore.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In our inode-tests.c, we create an inline offset at file offset 5, which
is no longer possible since the introduction of tree-checker.

Thus I don't think we should spend time maintaining some corner cases
which are already ruled out by tree-checker.

So this patch will:

- Change the inline extent to start at file offset 0

  Also change its length to 6 to cover the original length

- Add an extra ASSERT() for btrfs_add_extent_mapping()

  This is to make sure tree-checker is working correctly.

- Update the inode selftest
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Move these out of ctree.h into orphan.h to cut down on code in ctree.h.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This will make syncing fs.h to user space a little easier if we can pull
the super block specific helpers out of fs.h and put them in super.h.
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Move these out of ctree.h into super.h to cut down on code in ctree.h.
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We already have a few of these in fs.h, move the remaining checks out of
ctree.h into fs.h.
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Move these out of ctree.h into verity.h to cut down on code in ctree.h.
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We already have a dev-replace.h, simply move these prototypes and
helpers into dev-replace.h where they belong.
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Move these out of ctree.h into scrub.h to cut down on code in ctree.h.
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Move these out of ctree.h into relocation.h to cut down on code in
ctree.h
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Move these out of ctree.h into acl.h to cut down on code in ctree.h.
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

These belong in extent-tree.h, they were missed because they were not
grouped with the other extent-tree.c prototypes.
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The code for these functions are in messages.c, move the defines and
prototypes to messages.h.
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>