In dlmlock_remote(), we wait for the resource to stop being active before
setting the inprogress flag. Active includes recovery, migration, etc.

The problem here is that if the resource was being recovered or migrated, the
new owner could very well be that node itself (and thus not a remote node).
This problem was observed in Oracle bug#12583620. The error messages observed
were as follows:

dlm_send_remote_lock_request:337 ERROR: Error -40 (ELOOP) when sending message 503 (key 0xd6d8c7) to node 2
dlmlock_remote:271 ERROR: dlm status = DLM_BADARGS
dlmlock:751 ERROR: dlm status = DLM_BADARGS
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>

The inflight reference count, in the lock resource, is taken to pin the resource
in memory. We take it when a new resource is created and release it after a
lock is attached to it. We do this to prevent the resource from getting purged
prematurely.

Earlier this reference count was being taken for locally mastered resources
only. This patch extends the same functionality for remotely mastered ones.

We are doing this because the same premature purging could occur for remotely
mastered resources if the remote node were to die before completion of the
create lock.

Fix for Oracle bug#12405575.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>

dlm_wait_for_node_death() and dlm_wait_for_node_recovery() needed a facelift.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>

Add mlog to trace adding and removing the resource from/to the hash table.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>

Patch cleans up helpers that set/clear refmap bits and grab/drop inflight lock
ref counts.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>

dlm_finish_local_lockres_recovery() needed a facelift.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>

o2cb messages needed a facelift.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>

o2dlm messages needed a facelift.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>

o2net messages needed a facelift.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>

Currently if the heartbeat device is hard-ro, the o2hb thread keeps chugging
along and dumping errors along the way. The user needs to manually stop the
heartbeat.

The patch addresses this shortcoming by adding a limit to the number of times
the hb thread will iterate in an unsteady state. If the hb thread does not
ready steady state in that many interation, the start is aborted.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (237 commits)
  ARM: 7004/1: fix traps.h compile warnings
  ARM: 6998/2: kernel: use proper memory barriers for bitops
  ARM: 6997/1: ep93xx: increase NR_BANKS to 16 for support of 128MB RAM
  ARM: Fix build errors caused by adding generic macros
  ARM: CPU hotplug: ensure we migrate all IRQs off a downed CPU
  ARM: CPU hotplug: pass in proper affinity mask on IRQ migration
  ARM: GIC: avoid routing interrupts to offline CPUs
  ARM: CPU hotplug: fix abuse of irqdesc->node
  ARM: 6981/2: mmci: adjust calculation of f_min
  ARM: 7000/1: LPAE: Use long long printk format for displaying the pud
  ARM: 6999/1: head, zImage: Always Enter the kernel in ARM state
  ARM: btc: avoid invalidating the branch target cache on kernel TLB maintanence
  ARM: ARM_DMA_ZONE_SIZE is no more
  ARM: mach-shark: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-sa1100: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-realview: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-pxa: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-ixp4xx: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-h720x: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-davinci: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ...

Current documentation referred to the old method of handling augmented
trees.  Update documentation to correspond with the changes done in
commit b945d6b2 ("rbtree: Undo augmented trees performance damage
and regression").

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NSasha Levin <levinsasha928@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

<linux/kernel.h> is needed for min_t. The old version
happened to work on x86 because <asm/unaligned.h>
indirectly includes <linux/kernel.h>, but it didn't
work on ARM.

<linux/kernel.h> includes <asm/byteorder.h> so it's
not necessary to include it explicitly anymore.
Signed-off-by: NLasse Collin <lasse.collin@tukaani.org>
Cc: stable <stable@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (21 commits)
  [S390] use siginfo for sigtrap signals
  [S390] dasd: add enhanced DASD statistics interface
  [S390] kvm: make sigp emerg smp capable
  [S390] disable cpu measurement alerts on a dying cpu
  [S390] initial cr0 bits
  [S390] iucv cr0 enablement bit
  [S390] race safe external interrupt registration
  [S390] remove tape block docu
  [S390] ap: toleration support for ap device type 10
  [S390] cleanup program check handler prototypes
  [S390] remove kvm mmu reload on s390
  [S390] Use gmap translation for accessing guest memory
  [S390] use gmap address spaces for kvm guest images
  [S390] kvm guest address space mapping
  [S390] fix s390 assembler code alignments
  [S390] move sie code to entry.S
  [S390] kvm: handle tprot intercepts
  [S390] qdio: clear shared DSCI before scheduling the queue handler
  [S390] reference bit testing for unmapped pages
  [S390] irqs: Do not trace arch_local_{*,irq_*} functions
  ...

* 'for-upstream' of git://openrisc.net/jonas/linux: (24 commits)
  OpenRISC: Add MAINTAINERS entry
  OpenRISC: Miscellaneous
  OpenRISC: Library routines
  OpenRISC: Headers
  OpenRISC: Traps
  OpenRISC: Module support
  OpenRISC: GPIO
  OpenRISC: Scheduling/Process management
  OpenRISC: Idle/Power management
  OpenRISC: System calls
  OpenRISC: IRQ
  OpenRISC: Timekeeping
  OpenRISC: DMA
  OpenRISC: PTrace
  OpenRISC: Build infrastructure
  OpenRISC: Signal handling
  OpenRISC: Memory management
  OpenRISC: Device tree
  OpenRISC: Boot code
  iomap: make IOPORT/PCI mapping functions conditional
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  modpost: Fix modpost's license checking V3
  module: add /sys/module/<name>/uevent files
  module: change attr callbacks to take struct module_kobject
  modules: make arch's use default loader hooks
  modules: add default loader hook implementations
  param: fix return value handling in param_set_*

* 'kvm-updates/3.1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (143 commits)
  KVM: IOMMU: Disable device assignment without interrupt remapping
  KVM: MMU: trace mmio page fault
  KVM: MMU: mmio page fault support
  KVM: MMU: reorganize struct kvm_shadow_walk_iterator
  KVM: MMU: lockless walking shadow page table
  KVM: MMU: do not need atomicly to set/clear spte
  KVM: MMU: introduce the rules to modify shadow page table
  KVM: MMU: abstract some functions to handle fault pfn
  KVM: MMU: filter out the mmio pfn from the fault pfn
  KVM: MMU: remove bypass_guest_pf
  KVM: MMU: split kvm_mmu_free_page
  KVM: MMU: count used shadow pages on prepareing path
  KVM: MMU: rename 'pt_write' to 'emulate'
  KVM: MMU: cleanup for FNAME(fetch)
  KVM: MMU: optimize to handle dirty bit
  KVM: MMU: cache mmio info on page fault path
  KVM: x86: introduce vcpu_mmio_gva_to_gpa to cleanup the code
  KVM: MMU: do not update slot bitmap if spte is nonpresent
  KVM: MMU: fix walking shadow page table
  KVM guest: KVM Steal time registration
  ...

* 'upstream/xen-tracing2' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen/trace: use class for multicall trace
  xen/trace: convert mmu events to use DECLARE_EVENT_CLASS()/DEFINE_EVENT()
  xen/multicall: move *idx fields to start of mc_buffer
  xen/multicall: special-case singleton hypercalls
  xen/multicalls: add unlikely around slowpath in __xen_mc_entry()
  xen/multicalls: disable MC_DEBUG
  xen/mmu: tune pgtable alloc/release
  xen/mmu: use extend_args for more mmuext updates
  xen/trace: add tlb flush tracepoints
  xen/trace: add segment desc tracing
  xen/trace: add xen_pgd_(un)pin tracepoints
  xen/trace: add ptpage alloc/release tracepoints
  xen/trace: add mmu tracepoints
  xen/trace: add multicall tracing
  xen/trace: set up tracepoint skeleton
  xen/multicalls: remove debugfs stats
  trace/xen: add skeleton for Xen trace events

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (34 commits)
  crypto: caam - ablkcipher support
  crypto: caam - faster aead implementation
  crypto: caam - structure renaming
  crypto: caam - shorter names
  crypto: talitos - don't bad_key in ablkcipher setkey
  crypto: talitos - remove unused giv from ablkcipher methods
  crypto: talitos - don't set done notification in hot path
  crypto: talitos - ensure request ordering within a single tfm
  crypto: gf128mul - fix call to memset()
  crypto: s390 - support hardware accelerated SHA-224
  crypto: algif_hash - Handle initial af_alg_make_sg error correctly
  crypto: sha1_generic - use SHA1_BLOCK_SIZE
  hwrng: ppc4xx - add support for ppc4xx TRNG
  crypto: crypto4xx - Perform read/modify/write on device control register
  crypto: caam - fix build warning when DEBUG_FS not configured
  crypto: arc4 - Fixed coding style issues
  crypto: crc32c - Fixed coding style issue
  crypto: omap-sham - do not schedule tasklet if there is no active requests
  crypto: omap-sham - clear device flags when finishing request
  crypto: omap-sham - irq handler must not clear error code
  ...

The commit f02e8a65 sorts symbols placing each of them in its own elf section.
The sorting and merging into the canonical sections are done by the linker.
Unfortunately modpost to generate Module.symvers file parses vmlinux
(already linked) and all modules object files (which aren't linked yet).
These aren't sanitized by the linker yet. That breaks modpost that can't
detect license properly for modules. This patch makes modpost aware of
the new exported symbols structure.

Thanks to Arnaud Lacombe <lacombar@gmail.com> and Anders Kaseorg
<andersk@ksplice.com> for providing useful suggestions about code.

This work was supported by a hardware donation from the CE Linux Forum.
Reported-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAlessio Igor Bogani <abogani@kernel.org>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Userspace wants to manage module parameters with udev rules.
This currently only works for loaded modules, but not for
built-in ones.

To allow access to the built-in modules we need to
re-trigger all module load events that happened before any
userspace was running. We already do the same thing for all
devices, subsystems(buses) and drivers.

This adds the currently missing /sys/module/<name>/uevent files
to all module entries.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (split & trivial fix)

This simplifies the next patch, where we have an attribute on a
builtin module (ie. module == NULL).
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (split into 2)

This patch removes all the module loader hook implementations in the
architecture specific code where the functionality is the same as that
now provided by the recently added default hooks.
Signed-off-by: NJonas Bonn <jonas@southpole.se>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Tested-by: NMichal Simek <monstr@monstr.eu>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The module loader code allows architectures to hook into the code by
providing a small number of entry points that each arch must implement.
This patch provides __weakly linked generic implementations of these
entry points for architectures that don't need to do anything special.
Signed-off-by: NJonas Bonn <jonas@southpole.se>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

In STANDARD_PARAM_DEF, param_set_* handles the case in which strtolfn
returns -EINVAL but it may return -ERANGE. If it returns -ERANGE,
param_set_* may set uninitialized value to the paramerter. We should handle
both cases.

The one of the cases in which strtolfn() returns -ERANGE is following:

 *Type of module parameter is long
 *Set the parameter more than LONG_MAX
Signed-off-by: NSatoru Moriya <satoru.moriya@hds.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

IOMMU interrupt remapping support provides a further layer of
isolation for device assignment by preventing arbitrary interrupt
block DMA writes by a malicious guest from reaching the host.  By
default, we should require that the platform provides interrupt
remapping support, with an opt-in mechanism for existing behavior.

Both AMD IOMMU and Intel VT-d2 hardware support interrupt
remapping, however we currently only have software support on
the Intel side.  Users wishing to re-enable device assignment
when interrupt remapping is not supported on the platform can
use the "allow_unsafe_assigned_interrupts=1" module option.

[avi: break long lines]
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Add tracepoints to trace mmio page fault
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The idea is from Avi:

| We could cache the result of a miss in an spte by using a reserved bit, and
| checking the page fault error code (or seeing if we get an ept violation or
| ept misconfiguration), so if we get repeated mmio on a page, we don't need to
| search the slot list/tree.
| (https://lkml.org/lkml/2011/2/22/221)

When the page fault is caused by mmio, we cache the info in the shadow page
table, and also set the reserved bits in the shadow page table, so if the mmio
is caused again, we can quickly identify it and emulate it directly

Searching mmio gfn in memslots is heavy since we need to walk all memeslots, it
can be reduced by this feature, and also avoid walking guest page table for
soft mmu.

[jan: fix operator precedence issue]
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Reorganize it for good using the cache
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Use rcu to protect shadow pages table to be freed, so we can safely walk it,
it should run fastly and is needed by mmio page fault
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Now, the spte is just from nonprsent to present or present to nonprsent, so
we can use some trick to set/clear spte non-atomicly as linux kernel does
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Introduce some interfaces to modify spte as linux kernel does:
- mmu_spte_clear_track_bits, it set the spte from present to nonpresent, and
  track the stat bits(accessed/dirty) of spte
- mmu_spte_clear_no_track, the same as mmu_spte_clear_track_bits except
  tracking the stat bits
- mmu_spte_set, set spte from nonpresent to present
- mmu_spte_update, only update the stat bits

Now, it does not allowed to set spte from present to present, later, we can
drop the atomicly opration for X86_32 host, and it is the preparing work to
get spte on X86_32 host out of the mmu lock
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Introduce handle_abnormal_pfn to handle fault pfn on page fault path,
introduce mmu_invalid_pfn to handle fault pfn on prefetch path

It is the preparing work for mmio page fault support
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

If the page fault is caused by mmio, the gfn can not be found in memslots, and
'bad_pfn' is returned on gfn_to_hva path, so we can use 'bad_pfn' to identify
the mmio page fault.
And, to clarify the meaning of mmio pfn, we return fault page instead of bad
page when the gfn is not allowd to prefetch
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The idea is from Avi:
| Maybe it's time to kill off bypass_guest_pf=1.  It's not as effective as
| it used to be, since unsync pages always use shadow_trap_nonpresent_pte,
| and since we convert between the two nonpresent_ptes during sync and unsync.
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Split kvm_mmu_free_page to kvm_mmu_isolate_page and
kvm_mmu_free_page

One is used to remove the page from cache under mmu lock and the other is
used to free page table out of mmu lock
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Move counting used shadow pages from commiting path to preparing path to
reduce tlb flush on some paths
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

If 'pt_write' is true, we need to emulate the fault. And in later patch, we
need to emulate the fault even though it is not a pt_write event, so rename
it to better fit the meaning
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

gw->pte_access is the final access permission, since it is unified with
gw->pt_access when we walked guest page table:

FNAME(walk_addr_generic):
	pte_access = pt_access & FNAME(gpte_access)(vcpu, pte, true);
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

If dirty bit is not set, we can make the pte access read-only to avoid handing
dirty bit everywhere
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>