The Cirrus Logic EDB93xx development board platform init files
share redundant code. The only differences are in the flash
memory configuration, MACH_TYPE, and additional on-board
I2C devices. This patch merges all of them into one file.

Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Herbert Valerio Riedel <hvr@gnu.org>
Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com>
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NRyan Mallon <ryan@bluewatersys.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Update the rtc-ep93xx driver to use ioremap'ed addresses.

This removes the dependency on <mach/hardware.h> and properly
reports the memory addresses used by the driver in /proc/iomem.

In addition, ep93xx_rtc_init() is updated to use
platform_driver_probe() instead of platform_driver_register().

Also, the device_create_file() calls are now properly checked for
error conditions.  The created sysfs files are also now removed
when the driver is removed.

The version number for the driver has been bumped at the request
of Alessandro Zummo.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

In the long run, we may want to place page tables in highmem.  However,
pmd_page() has traditionally been coded to convert the physical address
to a virtual one, which won't work with highmem pages.  Instead,
translate the physical address to a PFN, and then convert the PFN to a
struct page instead.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Symbols like SOFT_RESET are way too generic to be exported at large.
To avoid this, let's move the mbus bridge register defines into a
separate file and include it where needed.  This affects mach-kirkwood,
mach-loki, mach-mv78xx0 and mach-orion5x simultaneously as they all
share code in plat-orion which relies on those defines.

Some other defines have been moved to narrower scopes, or simply deleted
when they had no user.

This fixes compilation problem with mpt2sas on the above listed
platforms.
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Pass clocksource pointer to the read() callback for clocksources.  This
allows us to share the callback between multiple instances.

[hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods]
[akpm@linux-foundation.org: cleanup]
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Acked-by: NJohn Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a version incorporating Christoph's suggestion.

Separate out common *fstatat functionality into a single function
instead of duplicating it all over the code.
Signed-off-by: NOleg Drokin <green@linuxhacker.ru>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

From: David Brownell <dbrownell@users.sourceforge.net>

Fix GPIO-related build error on mach-imx platform:

  CC      drivers/spi/spi_gpio.o
In file included from /home/db/kernel/scratch/arch/arm/include/asm/gpio.h:5,
                 from include/linux/gpio.h:7,
                 from drivers/spi/spi_gpio.c:23:
arch/arm/mach-imx/include/mach/gpio.h: In function 'imx_gpio_get_value':
arch/arm/mach-imx/include/mach/gpio.h:27: error: implicit declaration of function '__REG2'
arch/arm/mach-imx/include/mach/gpio.h:27: error: 'IMX_IO_BASE' undeclared (first use in this function)
arch/arm/mach-imx/include/mach/gpio.h:27: error: (Each undeclared identifier is reported only once
arch/arm/mach-imx/include/mach/gpio.h:27: error: for each function it appears in.)
arch/arm/mach-imx/include/mach/gpio.h: In function 'imx_gpio_set_value_inline':
arch/arm/mach-imx/include/mach/gpio.h:36: error: 'IMX_IO_BASE' undeclared (first use in this function)
arch/arm/mach-imx/include/mach/gpio.h:36: error: lvalue required as left operand of assignment
arch/arm/mach-imx/include/mach/gpio.h:38: error: lvalue required as left operand of assignment
	...
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Kernel 2.6.30-rc1 added sys_preadv and sys_pwritev to most archs
but not ARM, resulting in

<stdin>:1421:2: warning: #warning syscall preadv not implemented
<stdin>:1425:2: warning: #warning syscall pwritev not implemented

This patch adds sys_preadv and sys_pwritev to ARM.

These syscalls simply take five long-sized parameters, so they
should have no calling-convention/ABI issues in the kernel.

Tested on armv5tel eabi using a preadv/pwritev test program posted
on linuxppc-dev earlier this month.

It would be nice to get this into the kernel before 2.6.30 final,
so that glibc's kernel version feature test for these syscalls
doesn't have to special-case ARM.
Signed-off-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

As a result of an off-by-1 error pcm990 leaves one unused GPIO number between
built-in GPIOs and the pca9536 extender. Fix it.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NEric Miao <eric.miao@marvell.com>

Firstly, this patch makes the palm27x asoc driver a little more sane. Also,
since all affected devices use GPIO95 as AC97_nRESET, this patch sets that
properly. Affected are PalmT5, TX and LifeDrive.
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NEric Miao <eric.miao@marvell.com>

Check pending queue and remove the adc client being released.
Signed-off-by: NRamax Lo <ramaxlo@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The symbol 's3c_adc_try' in arch/arm/plat-s3c24xx/adc.c
does not need to be exported and thus should be static.

This fixes the following sparse warning:

adc.c:103:6: warning: symbol 's3c_adc_try' was not declared. Should it be static?
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The .init_machine entry in mach-osiris.c had the same entry
twice, so remove one definition to fix the following warning
from sparse:

mach-osiris.c:416:3: warning: Initializer entry defined twice
mach-osiris.c:418:3:   also defined here
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Make 'anubis_ide_platdata' statis as it is not used outside
the file it is in, fixing the following sparse warning:

mach-anubis.c:246:27: warning: symbol 'anubis_ide_platdata' was not declared. Should it be static?
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Make 'jive_vgg2432a4_display' and 'jive_lcd_config' static as
they are not exported, and are generating the following sparse
warnings:

mach-jive.c:280:26: warning: symbol 'jive_vgg2432a4_display' was not declared. Should it be static?
mach-jive.c:313:28: warning: symbol 'jive_lcd_config' was not declared. Should it be static?
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Fix the following sparse warning due to s3c_device_hwmon being
missing from <plat/devs.h>

devs.c:380:24: warning: symbol 's3c_device_hwmon' was not declared. Should it be static?
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Fix the following sparse error generated by including
<plat/gpio-core.h> instead of <mach/gpio-core.h>

gpiolib.c:78:22: warning: symbol 's3c24xx_gpios' was not declared. Should it be static?
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The VIC code will attempt to perform som
default set_irq_chip() and set_irq_chip_data()
on all IRQs supported by the VIC, while the new
IRQ handling code strictly checks for the global
NR_IRQS to be respected also for these IRQs.

This patch will respect the interrupt mask passed
to the VIC driver and will prevent it from
attempting to call these functions on any unused
interrupts.
Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch removes several i.MX board specific defconfig files in favour
for a mx1_defconfig, mx27_defconfig and mx3_defconfig. All config files
have all currently available boards, i.MX specific drivers and the network
device drivers for the boards enabled.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This allows the regulator API to power off unused regulators at the end
of init.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Otherwise we'd need massive ifdefs in the code.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Move ifdef under function brackets. This fixes compile crach when IRQ priorities
are disabled.
Signed-off-by: NDarius Augulis <augulis.darius@gmail.com>

Signed-off-by: NDarius Augulis <augulis.darius@gmail.com>

AIPS[12] are no mapped from generic MX3 code so we don't need to
map them from machine-specific map_io function anymore.
Signed-off-by: NIlya Yanok <yanok@emcraft.com>

To match the mxc_iomux_setup_multiple_pins() prototype.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt>
Cc: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: NValentin Longchamp <valentin.longchamp@epfl.ch>

This also adds the pins used on mx31moboard for WP and CD
Signed-off-by: NValentin Longchamp <valentin.longchamp@epfl.ch>

Add I2C pin definitions for MX31 SoC
Signed-off-by: NVladimir Barinov <vbarinov@embeddedalley.com>

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

gpio_direction_input needs the gpio number, not the pin description.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Set the correct clkdev-name for the i2c clock.

It also get's rid of the ARCH_NR_GPIOS define on the rationale
that isn't an ARCH-wide setting anyway. If a device has two
pca953x devices, the reserved number will be wrong.
Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de>

Signed-off-by: <hs4233@mail.mn-solutions.de>

Add an export of the two GPIO configuration calls
s3c_gpio_cfgpin and s3c_gpio_setpull to allow modules
to use them (such as ASoC drivers)
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Update the driver build in the s3c2410_defconfig for the
LED, IDE, Input and EEPROM options
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add more USB device driver options to the s3c2410_defconfig,
mostly as modules.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Update the filesystem options in the s3c2410_defconfig,
such as building ext4, enable the automounter as modules
and update the network filesysyem choices.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add a set of various video and radio drivers to the
s3c2410_defconfig as modules.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>