Move the bulk of client-side socket-specific code into a separate source
 file, net/sunrpc/xprtsock.c.

 Test-plan:
 Millions of fsx operations.  Performance characterization such as "sio" or
 "iozone".  Destructive testing (unplugging the network temporarily, server
 reboots).  Connectathon with v2, v3, and v4.

 Version: Thu, 11 Aug 2005 16:03:38 -0400
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Clean-up: Move some code that is common to both RPC client- and server-side
 socket transports into its own source file, net/sunrpc/socklib.c.

 Test-plan:
 Compile kernel with CONFIG_NFS enabled.  Millions of fsx operations over
 UDP, client and server.  Connectathon over UDP.

 Version: Thu, 11 Aug 2005 16:03:09 -0400
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 The in-kernel portmapper does not require a reserved port for making
 bind queries.

 Test-plan:
 Tens of runs of the Connectathon locking suite with TCP and UDP
 against several other NFS server implementations using NFSv3,
 not NFSv4 (which doesn't require rpcbind).

 Version: Thu, 11 Aug 2005 16:02:43 -0400
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Implement a best practice: don't use exponential backoff when computing
 retransmit timeout values on TCP connections, but simply retransmit
 at regular intervals.

 This also fixes a bug introduced when xprt_reset_majortimeo() was added.

 Test-plan:
 Enable RPC debugging and watch timeout behavior on a NFS/TCP mount.

 Version: Thu, 11 Aug 2005 16:02:19 -0400
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Implement a best practice:  for soft mounts, an rpcbind timeout should
 cause an RPC request to fail.

 This also provides an FSM hook for retrying an rpcbind with a different
 rpcbind protocol version.  We'll use this later to try multiple rpcbind
 protocol versions when binding.  To enable this, expose the RPC error
 code returned during a portmap request to the FSM so it can make some
 decision about how to report, retry, or fail the request.

 Test-plan:
 Hundreds of passes with connectathon NFSv3 locking suite, on the client
 and server.

 Version: Thu, 11 Aug 2005 16:01:53 -0400
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Fix up xprt_connect_status: the soft timeout logic was clobbering tk_status,
 so TCP connect errors were not properly reported on soft mounts.

 Test-plan:
 Destructive testing (unplugging the network temporarily).  Connectathon
 with UDP and TCP.

 Version: Thu, 11 Aug 2005 16:01:28 -0400
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Fixes a condition whereby the kernel is returning the non-POSIX error
 EBADCOOKIE to userspace.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

[PATCH] Fix miscompare in __posix_lock_file

 If an application requests the same lock twice, the
 kernel should just leave the existing lock in place.
 Currently, it will install a second lock of the same type.
Signed-off-by: NOlaf Kirch <okir@suse.de>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 When doing a rename on top of an existing file that is not in use,
 the inode of the overwritten file will remain in the icache.

 The fix is to decrement i_nlink of the overwritten inode, like we
 do for unlink, rmdir etc already.

 Problem diagnosed by Olaf Kirch. This patch is a slight variation
 on his fix.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

I believe the change that broke things is introduction of
pci_fixup_parent_subordinate_busnr().

The patch here does two things:
- hunk #1 should fix the problems you've seen when you boot without
  additional "pci" kernel options;
- hunk #2 supposedly fixes boot with "pci=assign-busses" option which
  otherwise hangs Acer TM81xx machines as reported.

Please try this with and without "pci=assign-busses". If it boots,
I'd like to see 'lspci -vvx' for both cases.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix to allow SCTP_SHUTDOWN notifications to be received on 1-1 style
SCTP SOCK_STREAM sockets.

Add SCTP_SHUTDOWN notification to the receive queue before updating
the state of the association.
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes a number of bugs.  It cannot be reasonably split up in
multiple fixes, since all bugs interact with each other and affect the same
function:

Bug #1:
The event cache code cannot be called while a lock is held.  Therefore, the
call to ip_conntrack_event_cache() within ip_ct_refresh_acct() needs to be
moved outside of the locked section.  This fixes a number of 2.6.14-rcX
oops and deadlock reports.

Bug #2:
We used to call ct_add_counters() for unconfirmed connections without
holding a lock.  Since the add operations are not atomic, we could race
with another CPU.

Bug #3:
ip_ct_refresh_acct() lost REFRESH events in some cases where refresh
(and the corresponding event) are desired, but no accounting shall be
performed.  Both, evenst and accounting implicitly depended on the skb
parameter bein non-null.   We now re-introduce a non-accounting
"ip_ct_refresh()" variant to explicitly state the desired behaviour.
Signed-off-by: NHarald Welte <laforge@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHarald Welte <laforge@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NHarald Welte <laforge@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As noted by Alexey Dobriyan, the DEBUGP statement prints the wrong
callID.
Signed-off-by: NHarald Welte <laforge@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NVlad Drukker <vlad@storewiz.com>
Acked-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since the introduction of TSO pcount a year ago, it has been possible
for tcp_fragment() to cause packets_out to decrease.  Prior to that,
tcp_retrans_try_collapse() was the only way for that to happen on the
retransmission path.

When this happens with Reno, it is possible for sasked_out to become
invalid because it is only an estimate and not tied to any particular
packet on the retransmission queue.

Therefore we need to adjust sacked_out as well as left_out in the Reno
case.  The following patch does exactly that.

This bug is pretty difficult to trigger in practice though since you
need a SACKless peer with a retransmission that occurs just as the
cached MTU value expires.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I've recently discovered the real functionality of device-mapper snapshots,
and since they are not well known, I've decided to write some docs for
them.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

nfs_readpage_release() causes an oops while accessing a file with NFS
debugging turned on (echo 32767 > /proc/sys/sunrpc/nfs_debug) and a kernel
built with CONFIG_DEBUG_SLAB.

This patch moves the debugging statement above nfs_release_request() to
avoid accessing freed memory.
Signed-off-by: NNick Wilson <njw@osdl.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Problem: In some circumstances, bd_claim() is returning the wrong error
code.

If we try to swapon an unused block device that isn't swap formatted, we
get -EINVAL.  But if that same block device is already mounted, we instead
get -EBUSY, even though it still isn't a valid swap device.

This issue came up on the busybox list trying to get the error message
from "swapon -a" right.  If a swap device is already enabled, we get -EBUSY,
and we shouldn't report this as an error.  But we can't distinguish the two
-EBUSY conditions, which are very different errors.

In the code, bd_claim() returns either 0 or -EBUSY, but in this case busy
means "somebody other than sys_swapon has already claimed this", and
_that_ means this block device can't be a valid swap device.  So return
-EINVAL there.
Signed-off-by: NRob Landley <rob@landley.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix some warnings and a build error when EXT3_DEBUG is enabled.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It's deprecated. Use "%s", __FUNCTION__ instead.
Signed-off-by: NClemens Buchacher <drizzd@aon.at>
Signed-off-by: NMaximilian Attems <janitor@sternwelten.at>
Signed-off-by: NDomen Puncer <domen@coderock.org>
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove io_remap_page_range() from all of Linux 2.6.x (as requested and
suggested by Randy Dunlap) and minor clean-ups.
Signed-off-by: NChris Zankel <chris@zankel.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

User get *a lot* confused when consoles don't work but we don't report
anything.  And, as reported in the comment, using printk to report "your
console doesn't work" isn't likely to go that far.

Fix the problem on the base of this: stack consumption by host printf().  Use
kernel sprintf() and os_write_file, using a wild guess that one page will be
enough for the message, to preallocate the buffer with kmalloc().
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

setup_initial_poll is only called with sigio_lock() held, so use appropriate
allocation.

Also, parse_chan() can also be called when holding a spinlock (see line_open()
 -> parse_chan_pair()).

I have sporadic problems (spinlock taken twice, with spinlock debugging on UP)
which could be caused by a sequence like "take spinlock, alloc and go to
sleep, take again the spinlock in the other thread".
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

GFP_ATOMIC | GFP_KERNEL is meaningless and won't work.  Actually it never
worked, even in 2.4.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Following i386, we should maybe refuse trying to fault in pages when we're
doing atomic operations, because to handle the fault we could need to take
already taken spinlocks.

Also, if we're doing an atomic operation (in the sense of in_atomic()) we're
surely in kernel mode and we're surely going to handle adequately the failed
fault, so it's safe to behave this way.

Currently, on UML SMP is rarely used, and we don't support PREEMPT, so this is
unlikely to create problems right now, but it might in the future.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Things are breaking horribly with sysrq called in interrupt context.  I want
to try to fix it, but probably this is simpler.  To tell the truth, sysrq is
normally run in interrupt context, so there shouldn't be any problem.

There's also a warning from the fault handler because it's run in atomic
context (I have a patch for that, only I deferred it).  This is why I'm doing
this.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Avoid setting w = 0 twice.  Spotted this (trivial) thing which is needed for
another patch.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The current code doesn't handle well general protection faults on the host -
it thinks that cr2 is always the address of a page fault.  While actually, on
general protection faults, that address is not accessible, so we'd better
assume we couldn't satisfy the fault.  Currently instead we think we've fixed
it, so we go back, retry the instruction and fault again endlessly.

This leads to the kernel hanging when doing copy_from_user(dest, -1, ...) in
TT mode, since reading *(-1) causes a GFP, and we don't support kernel
preemption.

Thanks to Luo Xin for testing UML with LTP and reporting the failures he got.

Cc: Luo Xin <luothing@sina.com>
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

pte_modify marks a page as needing flush, which is redundant because the
resulting PTE is still set with set_pte, which already handles that.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Simplify the code by using strlcat() instead of strncat() and manual
appending.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Only remove the UML pidfile and management socket if we created them.
Currently in case two UMLs are started with the same umid, the second will
remove the first's ones.

Probably we should also panic() at that point, not sure however.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix comments in swsusp.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I had an issue on ia64 where I got a bug in kernel/workqueue because
kzalloc returned a NULL pointer due to the task structure getting too big
for the slab allocator.  Usually these cases are caught by the kmalloc
macro in include/linux/slab.h.

Compilation will fail if a too big value is passed to kmalloc.

However, kzalloc uses __kmalloc which has no check for that.  This patch
makes __kmalloc bug if a too large entity is requested.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The PowerMac mesh SCSI driver had some missing error handling which would
trigger warnings due to lack of handling of return value from
scsi_add_host.  This fixes it.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Correctly identify atiixp_modem in its error messages.
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Corrections to the recent top-level README changes.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The SMU is the "system controller" chip used by Apple recent G5 machines
including the iMac G5.  It drives things like fans, i2c busses, real time
clock, etc...

The current kernel contains a very crude driver that doesn't do much more
than reading the real time clock synchronously.  This is a completely
rewritten driver that provides interrupt based command queuing, a userland
interface, and an i2c/smbus driver for accessing the devices hanging off
the SMU i2c busses like temperature sensors.  This driver is a basic block
for upcoming work on thermal control for those machines, among others.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>