- 06 10月, 2018 10 次提交
-
-
由 Lorenzo Bianconi 提交于
Use mt76x02_dev data structure as reference in mt76x02_mmio.c instead of mt76_dev Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Lorenzo Bianconi 提交于
Move mt76x02_tx_complete mt76x02-lib module in order to be reused by mt76x0 drivers for irq unification. Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Lorenzo Bianconi 提交于
Move mt76x02_tx_prepare_skb routine in mt76x02-lib module in order to be reused by mt76x0 driver in tx datapath Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Lorenzo Bianconi 提交于
Move mt76x02_tx_get_txpwr_adj and mt76x02_tx_set_txpwr_auto routines in mt76x02-lib module since they are shared between mt76x0 and mt76x2 drivers. Moreover remove get_txpwr_adj function pointer Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Lorenzo Bianconi 提交于
Rename mt76x02_util.h header file in mt76x02.h since now contains all mt76x02 related definitions and not just utility routines declarations Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Lorenzo Bianconi 提交于
Unify rxwi parsing between mt76x2 and mt76x0. Remove the following routines: - mt76x0_phy_get_rssi - mt76x0_queue_rx_skb - mt76x0_mac_process_rx Moreover remove mt76x2/common.c and mt76x0/mac.h since are empty files Enable CCMP PN sw validation Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Lorenzo Bianconi 提交于
Move mt76x2_dev in mt76x02_util.h and rename it in mt76x02_dev in order to be shared between mt76x2 and mt76x0 driver Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Lorenzo Bianconi 提交于
Add get_tx_txpwr_adj function pointer to mt76_driver_ops data structure as a preliminary patch to unify txwi configuration between mt76x0 and mt76x2 drivers since tpc is currently supported just by mt76x2 driver Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Lorenzo Bianconi 提交于
Move mt76x02_tx_get_max_txpwr_adj routine in mt76x02-lib module since now both mt76x0 and mt76x2 drivers read rate tx power gain from rate_power data structure. Moreover remove get_max_txpwr_adj function pointer from mt76_driver_ops data structure Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Lorenzo Bianconi 提交于
Move mt76x2 and mt76x2u drivers to mt76x2 subfolder and leave just shared code in mt76 root folder Acked-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
- 01 10月, 2018 7 次提交
-
-
由 Lorenzo Bianconi 提交于
Introduce mt76x02_mac_start since the mac start code is shared between mt76x0e and mt76x2 drivers. Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Lorenzo Bianconi 提交于
Move mt76x02_beacon_offset utility routine in mt76x02-lib module since it is shared between mt76x0 and mt76x2 driver and remove duplicated code. Moreover move beacon_offset data structure in mt76x02-lib module since it is shared between mt76x0 and mt76x2 drivers Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Lorenzo Bianconi 提交于
Move mt76x02_dma_init, mt76x02_init_rx_queue and mt76x02_init_tx_queue routines in mt76x02-lib module in order to be reused by mt76x0 driver Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Lorenzo Bianconi 提交于
Move mt76x02_set_irq_mask, mt76x02_irq_enable and mt76x02_irq_disable in mt76x02-lib module in order to be reused by mt76x0 driver. Moreover move irq_lock and irqmask in mt76_mmio data structure Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Lorenzo Bianconi 提交于
Introduce mt76x02_dma_enable and mt76x02_dma_disable utility routines in order to be reused in mt76x0 mac configuration and remove duplicated code Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Lorenzo Bianconi 提交于
Move wait_for_wpdma utility routine in mt76x02_dma.h in order to be reused by mt76x0 driver. Moreover add the possibility to specify the timeout value in wait_for_wpdma signature Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Lorenzo Bianconi 提交于
Move mt76x2_eeprom_get utility routine in mt76x02_eeprom.h since it will be used to parse mt76x0 eeprom in order to unify eeprom support between mt76x2 and mt76x0 drivers Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
- 19 9月, 2018 4 次提交
-
-
由 Lorenzo Bianconi 提交于
Move shared mt76x2/mt76x0 mcu shared code in a common file and remove duplicated code Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Lorenzo Bianconi 提交于
Move mt76x2_rate definition in mt76x02-lib module and rename it in mt76x02_rates in order to be reused in mt76x0 driver. Moreover remove unused mt76_rate definition Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Stanislaw Gruszka 提交于
txwi and rxwi are the same for mt76x0 and mt76x2. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Stanislaw Gruszka 提交于
Use common sta_rate_tbl_update on mt76x0 and mt76x2. mt76x0 do not have support TPC (transmision power control) implmented, msta->wcid.max_txpwr_adj is only set for mt76x2. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
- 04 9月, 2018 5 次提交
-
-
由 Stanislaw Gruszka 提交于
Second part of unifying mt76x02_sta structure between mt76x0 and mt76x2. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Stanislaw Gruszka 提交于
Merge mt76x{0,2}_mac_wcid_setup into common code. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Stanislaw Gruszka 提交于
Merge mt76x{0,2} mac_shared_key_setup into common code. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Stanislaw Gruszka 提交于
Move rxfilter and mutex to common structure. Create mt76x02-lib.ko for mt76x0 and mt76x2 common functions and create new unified mt76x02_configure_filter() function there. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Stanislaw Gruszka 提交于
Create new mt76x02_mac.h for common mac functions of mt76x0 and mt76x2 and unity wait_for_mac for both drivers. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 03 8月, 2018 5 次提交
-
-
由 Lorenzo Bianconi 提交于
Move init related code shared between mt76x2 and mt76x2u in mt76x2-common module Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Lorenzo Bianconi 提交于
Move mac related code shared between mt76x2 and mt76x2u in mt76x2-common module Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Lorenzo Bianconi 提交于
Move wiphy interface_modes definition in mt76x2_init in order to reuse mt76_register_device routine supporting mt76x2u based chipsets since mt76x2u currently supports just sta mode Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Lorenzo Bianconi 提交于
Add mt76x2_init_device routine in order to reuse common pcie/usb mac80211 initialization code supporting mt76x2u based device Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Lorenzo Bianconi 提交于
In order to reuse them supporting mt76x2u based devices, move mt76x2_wait_for_mac, wait_for_wpdma and mt76x2_channel_silent in mt76x2.h Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 30 7月, 2018 1 次提交
-
-
由 Lorenzo Bianconi 提交于
Use 11M as tx rate for CCK protection control frames Fixes: 7bc04215 ("mt76: add driver code for MT76x2e") Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 23 5月, 2018 4 次提交
-
-
由 Felix Fietkau 提交于
usleep_range can cause excessive latency on channel change if waiting for the MAC to stop fails. It will be forced to stop by the code following that loop anyway. Signed-off-by: NFelix Fietkau <nbd@nbd.name> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Felix Fietkau 提交于
Allows it to be shared between different drivers and locks to be initialized earlier Signed-off-by: NFelix Fietkau <nbd@nbd.name> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Felix Fietkau 提交于
For encryption to work properly, the BSS index needs to be initialized for the WCID entry used for the interface. Signed-off-by: NFelix Fietkau <nbd@nbd.name> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Lorenzo Bianconi 提交于
According to 802.11-2007 17.3.8.6 (slot time), the slot time should be increased by 3 us * coverage class. Taking into account coverage class in slot time configuration allows to increase by an order of magnitude the throughput on a 4Km link in a noisy environment Tested-by: NLuca Bisti <luca.bisti@gmail.com> Tested-by: NGaetano Catalli <gaetano.catalli@gmail.com> Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: NFelix Fietkau <nbd@nbd.name> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 12 5月, 2018 1 次提交
-
-
由 Lorenzo Bianconi 提交于
Add a usleep_range in mt76x2_mac_stop routine in order to add a polling delay checking values of MT_MAC_STATUS and IBI_R12 registers Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: NFelix Fietkau <nbd@nbd.name> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 30 4月, 2018 1 次提交
-
-
由 Felix Fietkau 提交于
Add a spinlock in mt76_rx_complete. Without this, multiple stats updates could happen in parallel, which can lead to deadlocks. There are probably more corner cases fixed by this change. Signed-off-by: NFelix Fietkau <nbd@nbd.name> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 25 4月, 2018 1 次提交
-
-
由 Lorenzo Bianconi 提交于
Add static qualifier to mt76x2_mac_reset routine and remove the prototype from mt76x2_mac.h since it is used just in mt76x2_init.c Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: NFelix Fietkau <nbd@nbd.name> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 14 3月, 2018 1 次提交
-
-
由 Lorenzo Bianconi 提交于
Initialize available_antennas related info in wiphy data structure according to antenna_mask field; antenna_mask info is initialized in device specific code and will be used in mac80211 {set,get}_antenna callbacks Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-