Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I've found the problem in general.  It affects any 64-bit
architecture.  The problem occurs when you change the system time.

Suppose that when you boot your system clock is forward by a day.
This gets recorded down in skb_tv_base.  You then wind the clock back
by a day.  From that point onwards the offset will be negative which
essentially overflows the 32-bit variables they're stored in.

In fact, why don't we just store the real time stamp in those 32-bit
variables? After all, we're not going to overflow for quite a while
yet.

When we do overflow, we'll need a better solution of course.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

2.6.14-rc2 does not assign cpus to proper nodeids on our em64t numa boxen.
Our boxes use acpi srat for parsing the numa information.

srat_detect_node() used phys_proc_id[] to get to the cpu's local apic id,
but phys_proc_id[] represents the cpu<->initial_apic_id mapping.  The
following patch fixes this problem.  Now apicid_to_node[] is properly
indexed with the local apic id.
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Improve explanation of the Subject line fields in
Documentation/SubmittingPatches Canonical Patch Format.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some Legacy megaraid cards can't actually cope with the scatter/gather
version of the READ CAPACITY command (which is what we now send them
since altering all SCSI internal I/O to go via the block layer).  Fix
this (and a few other broken megaraid driver assumptions) by sending
the non-sg version of the command if the sg list only has a single
element.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Document more details of patch format such as the "from" line
and the "---" marker line, and provide more references for
patch guidelines.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch from Catalin Marinas

Data abort caused by ldrex/strex can leave the exclusive monitor in an
unpredictable state. It is recommended that a clrex/strex is performed to
clear this state.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Pass in the pointer to the on-stack registers rather than using them
directly as the arguments.

Ivan noticed that I missed a spot when purging the registers as first
stack parameter idiom.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In these drivers, scsi_remove_host() is called too late, at the point
it is called, the driver has already shut down too far to accept any
I/O that the shutdown might generate.  Any generated I/O actually
triggers a panic.

Fix this by calling scsi_remove_host() as early as possible and not
calling scsi_host_put() until just before we kfree the ahc_softc.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

There's a problem in our host release in that it calls
scsi_proc_hostdir_rm(). However, if you hold a reference to the host as
you remove the module, the host template (which proc uses) will be freed
and the system will panic when the host device is finally released.

Fix this by moving scsi_proc_hostdir_rm() to where it should be: in
scsi_remove_host().
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Arrange for the initialisation printks to happen after we've
registered the network interface, so we know what name the
device is.  Also, check the link every 500ms (and use
msecs_to_jiffies.)
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

EBSA110 link detection didn't read the register - it wrote it.  Oops.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This adds the new iBook G4 (manufactured after July 2005) to the
PowerMac models table.  The model name (PowerBook6,7) is taken from a
12" iBook, I don't know if it also matches the 14" version.  The patch
applies to a vanilla 2.6.13.2 kernel.
Signed-off-by: NSven Henkel <shenkel@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This adds suspend support for the Radeon M11 chip in 12" iBooks
manufactured after July 2005.  I don't know if the new 14" iBooks also
have that chip, so they might also be supported.

The chip identifies itself as "RV350 NV" (pci id 0x4e56), revision 0x80.
Apple calls it "Snowy", xfree86 names it "ATI FireGL Mobility T2 (M11)
NV (AGP)".  So, we seem to be lucky here: The suspend-code for the M10
(which also is a "RV350 NV") works flawless for that chip.
Signed-off-by: NSven Henkel <shenkel@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch from Vincent Sanders

When building the fortunet ARM platform it fails to compile because of
missing include.
Signed-off-by: NVincent Sanders <vince@arm.linux.org.uk>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Vincent Sanders

When building the mx1ads ARM platforms the serial driver fails to compile
with GCC 4.01 due to extern/static ambiguity.
Signed-off-by: NVincent Sanders <vince@arm.linux.org.uk>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We should always use bitmask ops, rather than depend on some ordering of
the different states.  With the TASK_NONINTERACTIVE flag, the inequality
doesn't really work.

Oleg Nesterov argues (likely correctly) that this test is unnecessary in
the first place.  However, the minimal fix for now is to at least make
it work in the presense of TASK_NONINTERACTIVE.  Waiting for consensus
from Roland & co on potential bigger cleanups.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use '#ifdef' consistently on __KERNEL__.  This was reported as bug #5340
(isn't easier to send a fix than report the bug?!)
Signed-off-by: NDiego Calleja <diegocg@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The incorrect kprobe_mutex usage on x86_64 had percolated to ppc64 too.
First noticed by Yanmin Zhang.
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Serial port only needs 32 bytes of resource space but we are currently
asking for 64K.
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
[ diff went missing first time due to corrupted patch ]
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Tone down the r8169 driver

As an alternative, people can use the boot time 'debug' option and/or use
'ethtool -s ethX msglvl xyz'.  The different messages are listed at:
http://www.zoreil.com/~romieu/r8169/doc/msglvl.txtSigned-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The old 550Mhz titanium powerbook can switch to a lower frequency
(500Mhz). A user has been repeately reporting overtemp conditions on his
machine at high speed so this simple patch adds support to PowerMac
cpufreq for this machine. The difference in frequency isn't big but seem
enough to fix that user's problems. The patch has been around for some
time now and doesn't seem to cause any problem, so I suppose it could go
in now.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAlain RICHARD <alain.richard@equation.fr>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Serial port only needs 32 bytes of resource space but we are currently
asking for 64K.
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The tests Alok carried out on Petr's box confirmed that cpu_to_node[BP] is
not setup early enough by numa_init_array due to the x86_64 changes in
2.6.14-rc*, and unfortunately set wrongly by the work around code in
numa_init_array().  cpu_to_node[0] gets set with 1 early and later gets set
properly to 0 during identify_cpu() when all cpus are brought up, but
confusing the numa slab in the process.

Here is a quick fix for this.  The right fix obviously is to have
cpu_to_node[bsp] setup early for numa_init_array().  The following patch
will fix the problem now, and the code can stay on even when
cpu_to_node{BP] gets fixed early correctly.

Thanks to Petr for access to his box.

Signed off by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NAlok N Kataria <alokk@calsoftinc.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix the BP node_to_cpumask.  2.6.14-rc* broke the boot cpu bit as the
cpu_to_node(0) is now not setup early enough for numa_init_array.
cpu_to_node[] is setup much later at srat_detect_node on acpi srat based
em64t machines.  This seems like a problem on amd machines too, Tested on
em64t though.  /sys/devices/system/node/node0/cpumap shows up sanely after
this patch.

Signed off by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NShai Fultheim <shai@scalex86.org>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The up()/down() orders are incorrect in arch/x86_64/kprobes.c file.
kprobe_mutext is used to protect the free kprobe instruction slot list.
arch_prepare_kprobe applies for a slot from the free list, and
arch_remove_kprobe returns a slot to the free list.  The incorrect up()/down()
orders to operate on kprobe_mutex fail to protect the free list.  If 2 threads
try to get/return kprobe instruction slot at the same time, the free slot list
might be broken, or a free slot might be applied by 2 threads.
Signed-off-by: NZhang Yanmin <Yanmin.zhang@intel.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

less noise in dmesg
Signed-off-by: NBen Collins <bcollins@debian.org>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NJody McIntyre <scjody@steamballoon.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

amdtp, dv1394, raw1394, video1394:

Delete legacy module aliases.  The macros did not work and the aliases are not
needed nowadays.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NBen Collins <bcollins@debian.org>
Signed-off-by: NJody McIntyre <scjody@steamballoon.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Work around limitation in rawiso routines.  Required with 1394b cards on
architectures where PAGE_SIZE is 4096.  Based on a previous patch by Ben
Collins.
Signed-off-by: NJody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove superfluous include.
Signed-off-by: NJody McIntyre <scjody@steamballoon.com>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NJody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

trivial edits of a few comments
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NBen Collins <bcollins@debian.org>
Signed-off-by: NJody McIntyre <scjody@steamballoon.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use of time_before() macro, defined at linux/jiffies.h, which deal with
wrapping correctly and are nicer to read.
Signed-off-by: NMarcelo Feitoza Parisi <marcelo@feitoza.com.br>
Signed-off-by: NDomen Puncer <domen@coderock.org>
Signed-off-by: NBen Collins <bcollins@debian.org>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NJody McIntyre <scjody@steamballoon.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix debug code so it prints the correct speed (was defaulting to 100, so
anything > 400 showed only 100).
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NBen Collins <bcollins@debian.org>
Signed-off-by: NJody McIntyre <scjody@steamballoon.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Skip a superfluous pause that occured when the config ROM of a node was
scanned unsuccessfully.  This also occurs if a node without link wrongly
enables its "link active" self ID flag.  A GWCTech 6-port hub does this.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NJody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Units were not detected if the local IRM performed a bus reset.  ("The root
node is not cycle master capable; selecting a new root node and resetting...",
often seen with iPods and other SBP-2 devices).  Rearrange the order of IRM
duties and node scanning.  TODO: Audit the ROM caching and parsing code for
underlying issues.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NJody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Set serialize_io=1 by default.  This is safer and required by seemingly more
and more hardware.  It causes little or no performance loss for S400 devices.
Performance of S800 1394b devices may drop by 25...30%.  Therefore make the
parameter's description and dmesg message clearer about performance impact.

Update description of the max_speed parameter too.  IEEE1394_SPEED_MAX is
currently S800.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NJody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>