Arch code should use tracehook_*() helpers, as documented in
include/linux/tracehook.h, ptrace_report_syscall() is not expected to
be used outside that file.

The patch does not look very nice, but at least it is correct
and opens the way for PTRACE_GET_SYSCALL_INFO API.
Co-authored-by: NDmitry V. Levin <ldv@altlinux.org>
Fixes: 5521eb4b ("powerpc/ptrace: Add support for PTRACE_SYSEMU")
Signed-off-by: NElvira Khabirova <lineprinter@altlinux.org>
Signed-off-by: NDmitry V. Levin <ldv@altlinux.org>
[mpe: Take this as a minimal fix for 4.20, we'll rework it later]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The "altmap" is used to provide a pool of memory that is reserved for
the vmemmap backing of hot-plugged memory. This is useful when adding
large amount of ZONE_DEVICE memory to a system with a limited amount of
normal memory.

On ppc64 we use huge pages to map the vmemmap which requires the backing
storage to be contigious and aligned to the hugepage size. The altmap
implementation allows for the altmap provider to reserve a few PFNs at
the start of the range for it's own uses and when this occurs the
first chunk of the altmap is not usable for hugepage mappings. On hash
there is no sane way to fall back to a normal sized page mapping so we
fail the allocation. This results in memory hotplug failing with
ENOMEM when the new range doesn't fall into an existing vmemmap block.

This patch handles this case by falling back to using system memory
rather than failing if we cannot allocate from the altmap. This
fallback should only ever be used for the first vmemmap block so it
should not cause excess memory consumption.

Fixes: 7b73d978 ("mm: pass the vmem_altmap to vmemmap_populate")
Signed-off-by: NOliver O'Halloran <oohall@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The interleave set cookie is used to determine if a label stored in the
metadata space should be applied to the current region. This is
important in the case of NVDIMMs since the firmware may change the
interleaving configuration of a DIMM which would invalidate the existing
labels. In our case the hypervisor hides those details from us so we
don't really care, but libnvdimm still requires the interleave set
cookie to be non-zero.

For our purposes we just need the set cookie to be unique and fixed for
a given PAPR SCM region and using the unit-guid (really a UUID) is fine
for this purpose.

Fixes: b5beae5e ("powerpc/pseries: Add driver for PAPR SCM regions")
Signed-off-by: NOliver O'Halloran <oohall@gmail.com>
[mpe: Use kernel types (u64)]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When a new nvdimm device is registered with libnvdimm via
nvdimm_create() it is added as a device on the nvdimm bus. The probe
function for the DIMM driver is potentially quite slow so actually
registering and probing the device is done in an async domain rather
than immediately after device creation. This can result in a race where
the region device (created 2nd) is probed first and fails to activate at
boot.

To fix this we use the same approach as the ACPI/NFIT driver which is to
check that all the DIMM devices registered successfully. LibNVDIMM
provides the nvdimm_bus_count_dimms() function which synchronises with
the async domain and verifies that the dimm was successfully registered
with the bus.

If either of these does not occur then we bail.

Fixes: b5beae5e ("powerpc/pseries: Add driver for PAPR SCM regions")
Signed-off-by: NOliver O'Halloran <oohall@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The return values of a h-call are returned in the CPU registers and
written to the provided buffer by the plpar_hcall() wrapper. As a result
the values written to memory are always in the native endian and should
not be byte swapped.

The inital implementation of the H-Call interface was done in qemu and
the returned values were byte swapped unnecessarily in both the
hypervisor and in the driver so this was only noticed when bringing up
the PowerVM implementation.

Fixes: b5beae5e ("powerpc/pseries: Add driver for PAPR SCM regions")
Signed-off-by: NOliver O'Halloran <oohall@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The ibm,unit-sizes property was originally specified as an array of two
u32s corresponding to the memory block size, and the number of blocks
available in that region. A fairly last-minute change to the SCM DT
specification was splitting that into two seperate u64 properties:
ibm,block-sizes and ibm,number-of-blocks that convey the same
information. No firmware / hypervisor that emitted the ibm,unit-size
property ever appeared in the wild.

Fixes: b5beae5e ("powerpc/pseries: Add driver for PAPR SCM regions")
Signed-off-by: NOliver O'Halloran <oohall@gmail.com>
[mpe: Use kernel types (u32/u64)]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Fix an off-by-one error in the memory resource range. This resource is
used to determine the address range of the memory to be hot-plugged as
ZONE_DEVICE memory. The current end address results in the kernel
attempting to map an additional memblock and the hypervisor may reject
the mapping resulting in the entire hot-plug failing.

Fixes: b5beae5e ("powerpc/pseries: Add driver for PAPR SCM regions")
Signed-off-by: NOliver O'Halloran <oohall@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Making PAPR_SCM select LIBNVDIMM results in circular dependencies in
Kconfig when another symbol depends on it. Fix this by replacing the
select with a depends.

Fixes: b5beae5e ("powerpc/pseries: Add driver for PAPR SCM regions")
Reported-by: NAlastair D'Silva <alastair@d-silva.org>
Signed-off-by: NOliver O'Halloran <oohall@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Now that there are different variants of pt_regs for userspace and
kernel, the uapi for the BPF_PROG_TYPE_PERF_EVENT program type must be
changed by exporting the user_pt_regs structure instead of the pt_regs
structure that is in-kernel only.

Fixes: 002af939 ("powerpc: Split user/kernel definitions of struct pt_regs")
Signed-off-by: NSandipan Das <sandipan@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In commit 5e9dcb61 ("powerpc/boot: Expose Kconfig symbols to
wrapper") we added a dependency to serial.c on autoconf.h:

  $(obj)/serial.c: $(obj)/autoconf.h

This works when building in-tree (ie. with KBUILD_OUTPUT unset)
because the obj tree is the src tree.

But when building with eg. O=build and -j 1 the build fails:

  gcc ... -I../arch/powerpc/boot -c -o arch/powerpc/boot/serial.o arch/powerpc/boot/serial.c
  gcc: error: arch/powerpc/boot/serial.c: No such file or directory

Why this is only happening with -j 1 is not clear, when building with
-j greater than 1 somehow we decide to look for serial.c in the src
tree (../), eg:

  gcc -I../arch/powerpc/boot -c -o arch/powerpc/boot/serial.o ../arch/powerpc/boot/serial.c

Regardless we shouldn't be specifying a dependency on serial.c in the
build tree, we want to add a dependency to the version in $(srctree)
so fix the rule to say that.

Fixes: 5e9dcb61 ("powerpc/boot: Expose Kconfig symbols to wrapper")
Tested-by: NDaniel Axtens <dja@axtens.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Commit 78e5dfea ("powerpc: dts: replace 'linux,stdout-path' with
'stdout-path'") broke the default console on a number of embedded
PowerPC systems, because it failed to also update the code in
arch/powerpc/kernel/legacy_serial.c to look for that property in
addition to the old one.

This fixes it.

Fixes: 78e5dfea ("powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'")
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The arch_teardown_msi_irqs() function assumes that controller ops
pointers were already checked in arch_setup_msi_irqs(), but this
assumption is wrong: arch_teardown_msi_irqs() can be called even when
arch_setup_msi_irqs() returns an error (-ENOSYS).

This can happen in the following scenario:
  - msi_capability_init() calls pci_msi_setup_msi_irqs()
  - pci_msi_setup_msi_irqs() returns -ENOSYS
  - msi_capability_init() notices the error and calls free_msi_irqs()
  - free_msi_irqs() calls pci_msi_teardown_msi_irqs()

This is easier to see when CONFIG_PCI_MSI_IRQ_DOMAIN is not set and
pci_msi_setup_msi_irqs() and pci_msi_teardown_msi_irqs() are just
aliases to arch_setup_msi_irqs() and arch_teardown_msi_irqs().

The call to free_msi_irqs() upon pci_msi_setup_msi_irqs() failure
seems legit, as it does additional cleanup; e.g.
list_del(&entry->list) and kfree(entry) inside free_msi_irqs() do
happen (MSI descriptors are allocated before pci_msi_setup_msi_irqs()
is called and need to be cleaned up if that fails).

Fixes: 6b2fd7ef ("PCI/MSI/PPC: Remove arch_msi_check_device()")
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: NRadu Rendec <radu.rendec@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

For some configs the build fails with:

  arch/powerpc/mm/dump_linuxpagetables.c: In function 'populate_markers':
  arch/powerpc/mm/dump_linuxpagetables.c:306:39: error: 'PKMAP_BASE' undeclared (first use in this function)
  arch/powerpc/mm/dump_linuxpagetables.c:314:50: error: 'LAST_PKMAP' undeclared (first use in this function)

These come from highmem.h, including that fixes the build.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Commit 6975a783 ("powerpc/boot: Allow building the zImage wrapper
as a relocatable ET_DYN", 2011-04-12) changed the procedure descriptor
at the start of crt0.S to have a hard-coded start address of 0x500000
rather than a reference to _zimage_start, presumably because having
a reference to a symbol introduced a relocation which is awkward to
handle in a position-independent executable.  Unfortunately, what is
at 0x500000 in the COFF image is not the first instruction, but the
procedure descriptor itself, that is, a word containing 0x500000,
which is not a valid instruction.  Hence, booting a COFF zImage
results in a "DEFAULT CATCH!, code=FFF00700" message from Open
Firmware.

This fixes the problem by (a) putting the procedure descriptor in the
data section and (b) adding a branch to _zimage_start as the first
instruction in the program.

Fixes: 6975a783 ("powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN")
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Currently the selftest wild_bctr can fail to build when an old gcc is
used, notably on gcc using a binutils version <= 2.27, because the
assembler does not support the integer suffix UL.

This patch adjusts the wild_bctr test so the REG_POISON value is still
treated as an unsigned long for the shifts on compilation but the UL
suffix is absent on the stringification, so the inline asm code
generated has no UL suffixes.
Signed-off-by: NGustavo Romero <gromero@linux.vnet.ibm.com>
[mpe: Wrap long line]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Commit 4c2de74c ("powerpc/64: Interrupts save PPR on stack rather
than thread_struct") changed sizeof(struct pt_regs) % 16 from 0 to 8,
which causes the interrupt frame allocation on kernel entry to put the
kernel stack out of alignment.

Quadword (16-byte) alignment for the stack is required by both the
64-bit v1 ABI (v1.9 § 3.2.2) and the 64-bit v2 ABI (v1.1 § 2.2.2.1).

Add a pad field to fix alignment, and add a BUILD_BUG_ON to catch this
in future.

Fixes: 4c2de74c ("powerpc/64: Interrupts save PPR on stack rather than thread_struct")
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When VPHN function is not supported and during cpu hotplug event,
kernel prints message 'VPHN function not supported. Disabling
polling...'. Currently it prints on every hotplug event, it floods
dmesg when a KVM guest tries to hotplug huge number of vcpus, let's
just print once and suppress further kernel prints.
Signed-off-by: NSatheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The selftest I recently added to test branching to an out-of-bounds
NIP doesn't work on 64-bit big endian. It does fail but not in the
right way. That is it SEGVs trying to load from the opd at BAD_NIP,
but it never gets as far as branching to BAD_NIP.

To fix it we need to create an opd which is reachable but which holds
the bad address.

Fixes: b7683fc6 ("selftests/powerpc: Add a test of wild bctr")
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Back in 2006 Ben added some workarounds for a misbehaviour in the
Spider IO bridge used on early Cell machines, see commit
014da7ff ("[POWERPC] Cell "Spider" MMIO workarounds"). Later these
were made to be generic, ie. not tied specifically to Spider.

The code stashes a token in the high bits (59-48) of virtual addresses
used for IO (eg. returned from ioremap()). This works fine when using
the Hash MMU, but when we're using the Radix MMU the bits used for the
token overlap with some of the bits of the virtual address.

This is because the maximum virtual address is larger with Radix, up
to c00fffffffffffff, and in fact we use that high part of the address
range for ioremap(), see RADIX_KERN_IO_START.

As it happens the bits that are used overlap with the bits that
differentiate an IO address vs a linear map address. If the resulting
address lies outside the linear mapping we will crash (see below), if
not we just corrupt memory.

  virtio-pci 0000:00:00.0: Using 64-bit direct DMA at offset 800000000000000
  Unable to handle kernel paging request for data at address 0xc000000080000014
  ...
  CFAR: c000000000626b98 DAR: c000000080000014 DSISR: 42000000 IRQMASK: 0
  GPR00: c0000000006c54fc c00000003e523378 c0000000016de600 0000000000000000
  GPR04: c00c000080000014 0000000000000007 0fffffff000affff 0000000000000030
         ^^^^
  ...
  NIP [c000000000626c5c] .iowrite8+0xec/0x100
  LR [c0000000006c992c] .vp_reset+0x2c/0x90
  Call Trace:
    .pci_bus_read_config_dword+0xc4/0x120 (unreliable)
    .register_virtio_device+0x13c/0x1c0
    .virtio_pci_probe+0x148/0x1f0
    .local_pci_probe+0x68/0x140
    .pci_device_probe+0x164/0x220
    .really_probe+0x274/0x3b0
    .driver_probe_device+0x80/0x170
    .__driver_attach+0x14c/0x150
    .bus_for_each_dev+0xb8/0x130
    .driver_attach+0x34/0x50
    .bus_add_driver+0x178/0x2f0
    .driver_register+0x90/0x1a0
    .__pci_register_driver+0x6c/0x90
    .virtio_pci_driver_init+0x2c/0x40
    .do_one_initcall+0x64/0x280
    .kernel_init_freeable+0x36c/0x474
    .kernel_init+0x24/0x160
    .ret_from_kernel_thread+0x58/0x7c

This hasn't been a problem because CONFIG_PPC_IO_WORKAROUNDS which
enables this code is usually not enabled. It is only enabled when it's
selected by PPC_CELL_NATIVE which is only selected by
PPC_IBM_CELL_BLADE and that in turn depends on BIG_ENDIAN. So in order
to hit the bug you need to build a big endian kernel, with IBM Cell
Blade support enabled, as well as Radix MMU support, and then boot
that on Power9 using Radix MMU.

Still we can fix the bug, so let's do that. We simply use fewer bits
for the token, taking the union of the restrictions on the address
from both Hash and Radix, we end up with 8 bits we can use for the
token. The only user of the token is iowa_mem_find_bus() which only
supports 8 token values, so 8 bits is plenty for that.

Fixes: 566ca99a ("powerpc/mm/radix: Add dummy radix_enabled()")
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

With preempt enabled we see warnings in do_slb_fault():

  BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u33:0/98
  futex hash table entries: 4096 (order: 3, 524288 bytes)
  caller is do_slb_fault+0x204/0x230
  CPU: 5 PID: 98 Comm: kworker/u33:0 Not tainted 4.19.0-rc3-gcc-7.3.1-00022-g1936f094 #138
  Call Trace:
    dump_stack+0xb4/0x104 (unreliable)
    check_preemption_disabled+0x148/0x150
    do_slb_fault+0x204/0x230
    data_access_slb_common+0x138/0x180

This is caused by the get_paca() in slb_allocate_kernel(), which
includes a call to debug_smp_processor_id().

slb_allocate_kernel() can only be called from do_slb_fault(), and in
that path interrupts are hard disabled and so we can't be preempted,
but we can't update the preempt flags (in thread_info) because that
could cause an SLB fault.

So just use local_paca which is safe and doesn't cause the warning.

Fixes: 48e7b769 ("powerpc/64s/hash: Convert SLB miss handlers to C")
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

TRACE_INCLUDE_PATH and TRACE_INCLUDE_FILE are used by
<trace/define_trace.h>, so like that #include, they should
be outside #ifdef protection.

They also need to be #undefed before defining, in case multiple trace
headers are included by the same C file.  This became the case on
book3e after commit cf4a6085 ("powerpc/mm: Add missing tracepoint for
tlbie"), leading to the following build error:

   CC      arch/powerpc/kvm/powerpc.o
In file included from arch/powerpc/kvm/powerpc.c:51:0:
arch/powerpc/kvm/trace.h:9:0: error: "TRACE_INCLUDE_PATH" redefined
[-Werror]
  #define TRACE_INCLUDE_PATH .
  ^
In file included from arch/powerpc/kvm/../mm/mmu_decl.h:25:0,
                  from arch/powerpc/kvm/powerpc.c:48:
./arch/powerpc/include/asm/trace.h:224:0: note: this is the location of
the previous definition
  #define TRACE_INCLUDE_PATH asm
  ^
cc1: all warnings being treated as errors
Reported-by: NChristian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: NScott Wood <oss@buserror.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The slbfee instruction was only added in ISA 2.05 (Power6), it's not
supported on older CPUs. We don't have a CPU feature for that ISA
version though, so just use the ISA 2.06 feature flag.

Fixes: e15a4fea ("powerpc/64s/hash: Add some SLB debugging tests")
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Old toolchains don't know about slbfee and break the build, eg:
  {standard input}:37: Error: Unrecognized opcode: `slbfee.'

Fix it by using the macro version. We need to add an underscore
version that takes raw register numbers from the inline asm, rather
than our Rx macros.

Fixes: e15a4fea ("powerpc/64s/hash: Add some SLB debugging tests")
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The code for assert_slb_exists() and assert_slb_notexists() is almost
identical, except for the polarity of the WARN_ON(). In a future patch
we'll need to modify this code, so consolidate it now into a single
function.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The NPU IOMMU is setup to mirror the parent PCIe device IOMMU
setup. Therefore it does not make sense to call dma operations such as
dma_map_page(), etc. directly on these devices. The existing dma_ops
simply print a warning if they are ever called, however this is
unnecessary and the warnings are likely to go unnoticed.

It is instead simpler to remove these operations and let the generic
DMA code print warnings (eg. via a NULL pointer deref) in cases of
buggy drivers attempting dma operations on NVLink devices.
Signed-off-by: NAlistair Popple <alistair@popple.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Pull UBIFS updates from Richard Weinberger:

 - Full filesystem authentication feature, UBIFS is now able to have the
   whole filesystem structure authenticated plus user data encrypted and
   authenticated.

 - Minor cleanups

* tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifs: (26 commits)
  ubifs: Remove unneeded semicolon
  Documentation: ubifs: Add authentication whitepaper
  ubifs: Enable authentication support
  ubifs: Do not update inode size in-place in authenticated mode
  ubifs: Add hashes and HMACs to default filesystem
  ubifs: authentication: Authenticate super block node
  ubifs: Create hash for default LPT
  ubfis: authentication: Authenticate master node
  ubifs: authentication: Authenticate LPT
  ubifs: Authenticate replayed journal
  ubifs: Add auth nodes to garbage collector journal head
  ubifs: Add authentication nodes to journal
  ubifs: authentication: Add hashes to index nodes
  ubifs: Add hashes to the tree node cache
  ubifs: Create functions to embed a HMAC in a node
  ubifs: Add helper functions for authentication support
  ubifs: Add separate functions to init/crc a node
  ubifs: Format changes for authentication support
  ubifs: Store read superblock node
  ubifs: Drop write_node
  ...

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

  Bugfix:
   - Fix build issues on architectures that don't provide 64-bit cmpxchg

  Cleanups:
   - Fix a spelling mistake"

* tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: fix spelling mistake, EACCESS -> EACCES
  SUNRPC: Use atomic(64)_t for seq_send(64)

Pull more timer updates from Thomas Gleixner:
 "A set of commits for the new C-SKY architecture timers"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  dt-bindings: timer: gx6605s SOC timer
  clocksource/drivers/c-sky: Add gx6605s SOC system timer
  dt-bindings: timer: C-SKY Multi-processor timer
  clocksource/drivers/c-sky: Add C-SKY SMP timer

Pull NTB updates from Jon Mason:
 "Fairly minor changes and bug fixes:

  NTB IDT thermal changes and hook into hwmon, ntb_netdev clean-up of
  private struct, and a few bug fixes"

* tag 'ntb-4.20' of git://github.com/jonmason/ntb:
  ntb: idt: Alter the driver info comments
  ntb: idt: Discard temperature sensor IRQ handler
  ntb: idt: Add basic hwmon sysfs interface
  ntb: idt: Alter temperature read method
  ntb_netdev: Simplify remove with client device drvdata
  NTB: transport: Try harder to alloc an aligned MW buffer
  ntb: ntb_transport: Mark expected switch fall-throughs
  ntb: idt: Set PCIe bus address to BARLIMITx
  NTB: ntb_hw_idt: replace IS_ERR_OR_NULL with regular NULL checks
  ntb: intel: fix return value for ndev_vec_mask()
  ntb_netdev: fix sleep time mismatch

Pull scheduler fixes from Ingo Molnar:
 "A memory (under-)allocation fix and a comment fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/topology: Fix off by one bug
  sched/rt: Update comment in pick_next_task_rt()

Pull x86 fixes from Ingo Molnar:
 "A number of fixes and some late updates:

   - make in_compat_syscall() behavior on x86-32 similar to other
     platforms, this touches a number of generic files but is not
     intended to impact non-x86 platforms.

   - objtool fixes

   - PAT preemption fix

   - paravirt fixes/cleanups

   - cpufeatures updates for new instructions

   - earlyprintk quirk

   - make microcode version in sysfs world-readable (it is already
     world-readable in procfs)

   - minor cleanups and fixes"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  compat: Cleanup in_compat_syscall() callers
  x86/compat: Adjust in_compat_syscall() to generic code under !COMPAT
  objtool: Support GCC 9 cold subfunction naming scheme
  x86/numa_emulation: Fix uniform-split numa emulation
  x86/paravirt: Remove unused _paravirt_ident_32
  x86/mm/pat: Disable preemption around __flush_tlb_all()
  x86/paravirt: Remove GPL from pv_ops export
  x86/traps: Use format string with panic() call
  x86: Clean up 'sizeof x' => 'sizeof(x)'
  x86/cpufeatures: Enumerate MOVDIR64B instruction
  x86/cpufeatures: Enumerate MOVDIRI instruction
  x86/earlyprintk: Add a force option for pciserial device
  objtool: Support per-function rodata sections
  x86/microcode: Make revision and processor flags world-readable

Pull perf updates and fixes from Ingo Molnar:
 "These are almost all tooling updates: 'perf top', 'perf trace' and
  'perf script' fixes and updates, an UAPI header sync with the merge
  window versions, license marker updates, much improved Sparc support
  from David Miller, and a number of fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (66 commits)
  perf intel-pt/bts: Calculate cpumode for synthesized samples
  perf intel-pt: Insert callchain context into synthesized callchains
  perf tools: Don't clone maps from parent when synthesizing forks
  perf top: Start display thread earlier
  tools headers uapi: Update linux/if_link.h header copy
  tools headers uapi: Update linux/netlink.h header copy
  tools headers: Sync the various kvm.h header copies
  tools include uapi: Update linux/mmap.h copy
  perf trace beauty: Use the mmap flags table generated from headers
  perf beauty: Wire up the mmap flags table generator to the Makefile
  perf beauty: Add a generator for MAP_ mmap's flag constants
  tools include uapi: Update asound.h copy
  tools arch uapi: Update asm-generic/unistd.h and arm64 unistd.h copies
  tools include uapi: Update linux/fs.h copy
  perf callchain: Honour the ordering of PERF_CONTEXT_{USER,KERNEL,etc}
  perf cs-etm: Correct CPU mode for samples
  perf unwind: Take pgoff into account when reporting elf to libdwfl
  perf top: Do not use overwrite mode by default
  perf top: Allow disabling the overwrite mode
  perf trace: Beautify mount's first pathname arg
  ...

Pull irq fixes from Ingo Molnar:
 "An irqchip driver fix and a memory (over-)allocation fix"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/irq-mvebu-sei: Fix a NULL vs IS_ERR() bug in probe function
  irq/matrix: Fix memory overallocation

With the addition of the NUMA identity level, we increased @level by
one and will run off the end of the array in the distance sort loop.

Fixed: 051f3ca0 ("sched/topology: Introduce NUMA identity node sched domain")
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull ARM SoC fixes from Olof Johansson:
 "A few fixes who have come in near or during the merge window:

   - Removal of a VLA usage in Marvell mpp platform code

   - Enable some IPMI options for ARM64 servers by default, helps
     testing

   - Enable PREEMPT on 32-bit ARMv7 defconfig

   - Minor fix for stm32 DT (removal of an unused DMA property)

   - Bugfix for TI OMAP1-based ams-delta (-EINVAL -> IRQ_NOTCONNECTED)"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: stm32: update HASH1 dmas property on stm32mp157c
  ARM: orion: avoid VLA in orion_mpp_conf
  ARM: defconfig: Update multi_v7 to use PREEMPT
  arm64: defconfig: Enable some IPMI configs
  soc: ti: QMSS: Fix usage of irq_set_affinity_hint
  ARM: OMAP1: ams-delta: Fix impossible .irq < 0

Pull more arm64 updates from Catalin Marinas:

 - fix W+X page (mark RO) allocated by the arm64 kprobes code

 - Makefile fix for .i files in out of tree modules

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kprobe: make page to RO mode when allocate it
  arm64: kdump: fix small typo
  arm64: makefile fix build of .i file in external module case

Pull dma-mapping fix from Christoph Hellwig:
 "Avoid compile warnings on non-default arm64 configs"

* tag 'dma-mapping-4.20-2' of git://git.infradead.org/users/hch/dma-mapping:
  arm64: fix warnings without CONFIG_IOMMU_DMA

Pull Kbuild updates from Masahiro Yamada:

 - clean-up leftovers in Kconfig files

 - remove stale oldnoconfig and silentoldconfig targets

 - remove unneeded cc-fullversion and cc-name variables

 - improve merge_config script to allow overriding option prefix

* tag 'kbuild-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: remove cc-name variable
  kbuild: replace cc-name test with CONFIG_CC_IS_CLANG
  merge_config.sh: Allow to define config prefix
  kbuild: remove unused cc-fullversion variable
  kconfig: remove silentoldconfig target
  kconfig: remove oldnoconfig target
  powerpc: PCI_MSI needs PCI
  powerpc: remove CONFIG_MCA leftovers
  powerpc: remove CONFIG_PCI_QSPAN
  scsi: aha152x: rename the PCMCIA define