Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 23 6月, 2020 1 次提交
  3. 27 2月, 2020 3 次提交
    • R
      perf annotate: Fix --show-nr-samples for tui/stdio2 · 46ccb442
      由 Ravi Bangoria 提交于 
      perf annotate --show-nr-samples does not really show number of samples.

The reason is we have two separate variables for the same purpose.

One is in symbol_conf.show_nr_samples and another is
annotation_options.show_nr_samples.

We save command line option in symbol_conf.show_nr_samples but uses
annotation_option.show_nr_samples while rendering tui/stdio2 browser.

Though, we copy symbol_conf.show_nr_samples to
annotation__default_options.show_nr_samples but that is not really
effective as we don't use annotation__default_options once we copy
default options to dynamic variable annotate.opts in cmd_annotate().

Instead of all these complication, keep only one variable and use it all
over. symbol_conf.show_nr_samples is used by perf report/top as well. So
let's kill annotation_options.show_nr_samples.

On a side note, I've kept annotation_options.show_nr_samples definition
because it's still used by perf-config code. Follow up patch to fix
perf-config for annotate will remove annotation_options.show_nr_samples.
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-4-ravi.bangoria@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      46ccb442
    • R
      perf annotate: Fix --show-total-period for tui/stdio2 · 68aac855
      由 Ravi Bangoria 提交于 
      perf annotate --show-total-period does not really show total period.

The reason is we have two separate variables for the same purpose.

One is in symbol_conf.show_total_period and another is
annotation_options.show_total_period.

We save command line option in symbol_conf.show_total_period but uses
annotation_option.show_total_period while rendering tui/stdio2 browser.

Though, we copy symbol_conf.show_total_period to
annotation__default_options.show_total_period but that is not really
effective as we don't use annotation__default_options once we copy
default options to dynamic variable annotate.opts in cmd_annotate().

Instead of all these complication, keep only one variable and use it all
over. symbol_conf.show_total_period is used by perf report/top as well.
So let's kill annotation_options.show_total_period.

On a side note, I've kept annotation_options.show_total_period
definition because it's still used by perf-config code. Follow up patch
to fix perf-config for annotate will remove
annotation_options.show_total_period.
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-3-ravi.bangoria@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      68aac855
    • R
      perf annotate/tui: Re-render title bar after switching back from script browser · 54cf752c
      由 Ravi Bangoria 提交于 
      The 'perf annotate' TUI browser provides a 'r' hot key to switch to a
script browser. But the annotate browser title bar becomes hidden while
switching back from script browser. Fix it.
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-2-ravi.bangoria@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      54cf752c
  5. 26 11月, 2019 1 次提交
  7. 12 11月, 2019 2 次提交
  9. 20 9月, 2019 1 次提交
  11. 01 9月, 2019 1 次提交
  13. 30 8月, 2019 1 次提交
  15. 30 7月, 2019 2 次提交
  17. 09 7月, 2019 1 次提交
  19. 07 7月, 2019 1 次提交
  21. 29 5月, 2019 1 次提交
  23. 12 3月, 2019 1 次提交
  25. 06 2月, 2019 1 次提交
  27. 21 1月, 2019 1 次提交
  29. 09 8月, 2018 6 次提交
  31. 04 6月, 2018 2 次提交
  33. 19 5月, 2018 1 次提交
    • J
      perf annotate: Create hotkey 'c' to show min/max cycles · 3e71fc03
      由 Jin Yao 提交于 
      In the 'perf annotate' view, a new hotkey 'c' is created for showing the
min/max cycles.

For example, when press 'c', the annotate view is:

  Percent│ IPC     Cycle(min/max)
         │
         │
         │                             Disassembly of section .text:
         │
         │                             000000000003aab0 <random@@GLIBC_2.2.5>:
    8.22 │3.92                           sub    $0x18,%rsp
         │3.92                           mov    $0x1,%esi
         │3.92                           xor    %eax,%eax
         │3.92                           cmpl   $0x0,argp_program_version_hook@@G
         │3.92             1(2/1)      ↓ je     20
         │                               lock   cmpxchg %esi,__abort_msg@@GLIBC_P
         │                             ↓ jne    29
         │                             ↓ jmp    43
         │1.10                     20:   cmpxchg %esi,__abort_msg@@GLIBC_PRIVATE+
    8.93 │1.10             1(5/1)      ↓ je     43

When press 'c' again, the annotate view is switched back:

  Percent│ IPC Cycle
         │
         │
         │                Disassembly of section .text:
         │
         │                000000000003aab0 <random@@GLIBC_2.2.5>:
    8.22 │3.92              sub    $0x18,%rsp
         │3.92              mov    $0x1,%esi
         │3.92              xor    %eax,%eax
         │3.92              cmpl   $0x0,argp_program_version_hook@@GLIBC_2.2.5+0x
         │3.92     1      ↓ je     20
         │                  lock   cmpxchg %esi,__abort_msg@@GLIBC_PRIVATE+0x8a0
         │                ↓ jne    29
         │                ↓ jmp    43
         │1.10        20:   cmpxchg %esi,__abort_msg@@GLIBC_PRIVATE+0x8a0
    8.93 │1.10     1      ↓ je     43
Signed-off-by: NJin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1526569118-14217-3-git-send-email-yao.jin@linux.intel.com
[ Rename all maxmin to minmax ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      3e71fc03
  35. 12 4月, 2018 1 次提交
    • A
      perf annotate browser: Allow showing offsets in more than just jump targets · 51f39603
      由 Arnaldo Carvalho de Melo 提交于 
      Jesper wanted to see offsets at callq sites when doing some performance
investigation related to retpolines, so save him some time by providing
a 'O' hotkey to allow showing offsets from function start at call
instructions or in all instructions, just go on pressing 'O' till the
offsets you need appear.

Example:

Starts with:

Samples: 64  of event 'cycles:ppp', 100000 Hz, Event count (approx.): 318963
ixgbe_read_reg  /proc/kcore
Percent│    ↑ je     2a
       │   ┌──cmp    $0xffffffff,%r13d
       │   ├──je     d0
       │   │  mov    $0x53e3,%edi
       │   │→ callq  __const_udelay
       │   │  sub    $0x1,%r15d
       │   │↑ jne    83
       │   │  mov    0x8(%rbp),%rax
       │   │  testb  $0x20,0x1799(%rax)
       │   │↑ je     2a
       │   │  mov    0x200(%rax),%rdi
       │   │  mov    %r13d,%edx
       │   │  mov    $0xffffffffc02595d8,%rsi
       │   │→ callq  netdev_warn
       │   │↑ jmpq   2a
       │d0:└─→mov    0x8(%rbp),%rsi
       │      mov    %rbp,%rdi
       │      mov    %eax,0x4(%rsp)
       │    → callq  ixgbe_remove_adapter.isra.77
       │      mov    0x4(%rsp),%eax
Press 'h' for help on key bindings
============================================================================

Pess 'O':

Samples: 64  of event 'cycles:ppp', 100000 Hz, Event count (approx.): 318963
ixgbe_read_reg  /proc/kcore
Percent│    ↑ je     2a
       │   ┌──cmp    $0xffffffff,%r13d
       │   ├──je     d0
       │   │  mov    $0x53e3,%edi
       │99:│→ callq  __const_udelay
       │   │  sub    $0x1,%r15d
       │   │↑ jne    83
       │   │  mov    0x8(%rbp),%rax
       │   │  testb  $0x20,0x1799(%rax)
       │   │↑ je     2a
       │   │  mov    0x200(%rax),%rdi
       │   │  mov    %r13d,%edx
       │   │  mov    $0xffffffffc02595d8,%rsi
       │c6:│→ callq  netdev_warn
       │   │↑ jmpq   2a
       │d0:└─→mov    0x8(%rbp),%rsi
       │      mov    %rbp,%rdi
       │      mov    %eax,0x4(%rsp)
       │db: → callq  ixgbe_remove_adapter.isra.77
       │      mov    0x4(%rsp),%eax
Press 'h' for help on key bindings
============================================================================

Press 'O' again:

Samples: 64  of event 'cycles:ppp', 100000 Hz, Event count (approx.): 318963
ixgbe_read_reg  /proc/kcore
Percent│8c: ↑ je     2a
       │8e:┌──cmp    $0xffffffff,%r13d
       │92:├──je     d0
       │94:│  mov    $0x53e3,%edi
       │99:│→ callq  __const_udelay
       │9e:│  sub    $0x1,%r15d
       │a2:│↑ jne    83
       │a4:│  mov    0x8(%rbp),%rax
       │a8:│  testb  $0x20,0x1799(%rax)
       │af:│↑ je     2a
       │b5:│  mov    0x200(%rax),%rdi
       │bc:│  mov    %r13d,%edx
       │bf:│  mov    $0xffffffffc02595d8,%rsi
       │c6:│→ callq  netdev_warn
       │cb:│↑ jmpq   2a
       │d0:└─→mov    0x8(%rbp),%rsi
       │d4:   mov    %rbp,%rdi
       │d7:   mov    %eax,0x4(%rsp)
       │db: → callq  ixgbe_remove_adapter.isra.77
       │e0:   mov    0x4(%rsp),%eax
Press 'h' for help on key bindings
============================================================================

Press 'O' again and it will show just jump target offsets.
Suggested-by: NJesper Dangaard Brouer <brouer@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-upp6pfdetwlsx18ec2uf1od4@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      51f39603
  37. 05 4月, 2018 1 次提交
  39. 04 4月, 2018 1 次提交
    • A
      perf annotate browser: Show extra title line with event information · 6920e285
      由 Arnaldo Carvalho de Melo 提交于 
      So at the top we'll have two lines, like this, from 'perf report':

  # perf report --group --ignore-vmlinux
=====================================================================================================
Samples: 46  of events 'cycles', 4000 Hz, Event count (approx.): 5154895
_raw_spin_lock_irqsave  /proc/kcore
Percent              │      nop
                     │      push   %rbx
  0.00  14.29   0.00 │      pushfq
  9.09   0.00   0.00 │      pop    %rax
  9.09   0.00  20.00 │      nop
                     │      mov    %rax,%rbx
                     │      cli
  4.55   7.14   0.00 │      nop
                     │      xor    %eax,%eax
                     │      mov    $0x1,%edx
                     │      lock   cmpxchg %edx,(%rdi)
 77.27  78.57  70.00 │      test   %eax,%eax
                     │    ↓ jne    2b
                     │      mov    %rbx,%rax
  0.00   0.00  10.00 │      pop    %rbx
                     │    ← retq
                     │2b:   mov    %eax,%esi
                     │    → callq  queued_spin_lock_slowpath
                     │      mov    %rbx,%rax
                     │      pop    %rbx
Press 'h' for help on│key bindings
=====================================================================================================

 9.09 + 9.09 + 4.55 + 77.27 = 100
14.29 + 7.14 + 78.57 = 100
20 + 70 + 10 = 100

We can do the math by using 't' to toggle from 'percent' to nr

=====================================================================================================
Samples: 46  of events 'cycles', 4000 Hz, Event count (approx.): 5154895
_raw_spin_lock_irqsave  /proc/kcore
Period                              │      nop
                                    │      push   %rbx
          0       79273           0 │      pushfq
     190455           0           0 │      pop    %rax
     198038           0        3045 │      nop
                                    │      mov    %rax,%rbx
                                    │      cli
     217233       32562           0 │      nop
                                    │      xor    %eax,%eax
                                    │      mov    $0x1,%edx
                                    │      lock   cmpxchg %edx,(%rdi)
    3421649      979174       28273 │      test   %eax,%eax
                                    │    ↓ jne    2b
                                    │      mov    %rbx,%rax
          0           0        5193 │      pop    %rbx
                                    │    ← retq
                                    │2b:   mov    %eax,%esi
                                    │    → callq  queued_spin_lock_slowpath
                                    │      mov    %rbx,%rax
                                    │      pop    %rbx
Press 'h' for help on│key bindings
=====================================================================================================

79273 + 190455 + 198038 + 3045 + 217233 + 32562 + 3421649 + 979174 + 28273 + 5193 = 5154895

Or number of samples:

=====================================================================================================
ooSamples: 46  of events 'cycles', 4000 Hz, Event count (approx.): 5154895
_raw_spin_lock_irqsave  /proc/kcore
Samples              │      nop
                     │      push   %rbx
     0      2      0 │      pushfq
     2      0      0 │      pop    %rax
     2      0      2 │      nop
                     │      mov    %rax,%rbx
                     │      cli
     1      1      0 │      nop
                     │      xor    %eax,%eax
                     │      mov    $0x1,%edx
                     │      lock   cmpxchg %edx,(%rdi)
    17     11      7 │      test   %eax,%eax
                     │    ↓ jne    2b
                     │      mov    %rbx,%rax
     0      0      1 │      pop    %rbx
                     │    ← retq
                     │2b:   mov    %eax,%esi
                     │    → callq  queued_spin_lock_slowpath
                     │      mov    %rbx,%rax
                     │      pop    %rbx
Press 'h' for help on key bindings
=====================================================================================================

2 + 2 + 2 + 2 + 1 + 1 + 17 + 11 + 7 + 1 = 46
Suggested-by: NMartin Liška <mliska@suse.cz>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196935
Link: https://lkml.kernel.org/n/tip-ezccyxld50wtwyt66np6aomo@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      6920e285
  41. 24 3月, 2018 2 次提交
    • A
      perf annotate: Support jumping from one function to another · e4cc91b8
      由 Arnaldo Carvalho de Melo 提交于 
      For instance:

  entry_SYSCALL_64  /lib/modules/4.16.0-rc5-00086-gdf09348f/build/vmlinux
    5.50 │     → callq  do_syscall_64
   14.56 │       mov    0x58(%rsp),%rcx
    7.44 │       mov    0x80(%rsp),%r11
    0.32 │       cmp    %rcx,%r11
         │     → jne    swapgs_restore_regs_and_return_to_usermode
    0.32 │       shl    $0x10,%rcx
    0.32 │       sar    $0x10,%rcx
    3.24 │       cmp    %rcx,%r11
         │     → jne    swapgs_restore_regs_and_return_to_usermode
    2.27 │       cmpq   $0x33,0x88(%rsp)
    1.29 │     → jne    swapgs_restore_regs_and_return_to_usermode
         │       mov    0x30(%rsp),%r11
    8.74 │       cmp    %r11,0x90(%rsp)
         │     → jne    swapgs_restore_regs_and_return_to_usermode
    0.32 │       test   $0x10100,%r11
         │     → jne    swapgs_restore_regs_and_return_to_usermode
    0.32 │       cmpq   $0x2b,0xa0(%rsp)
    0.65 │     → jne    swapgs_restore_regs_and_return_to_usermode

It'll behave just like a "call" instruction, i.e. press enter or right
arrow over one such line and the browser will navigate to the annotated
disassembly of that function, which when exited, via left arrow or esc,
will come back to the calling function.

Now to support jump to an offset on a different function...
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-78o508mqvr8inhj63ddtw7mo@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      e4cc91b8
    • A
      perf annotate: Add "_local" to jump/offset validation routines · 2eff0611
      由 Arnaldo Carvalho de Melo 提交于 
      Because they all really check if we can access data structures/visual
constructs where a "jump" instruction targets code in the same function,
i.e. things like:

  __pthread_mutex_lock  /usr/lib64/libpthread-2.26.so
  1.95 │       mov    __pthread_force_elision,%ecx
       │    ┌──test   %ecx,%ecx
  0.07 │    ├──je     60
       │    │  test   $0x300,%esi
       │    │↓ jne    60
       │    │  or     $0x100,%esi
       │    │  mov    %esi,0x10(%rdi)
       │ 42:│  mov    %esi,%edx
       │    │  lea    0x16(%r8),%rsi
       │    │  mov    %r8,%rdi
       │    │  and    $0x80,%edx
       │    │  add    $0x8,%rsp
       │    │→ jmpq   __lll_lock_elision
       │    │  nop
  0.29 │ 60:└─→and    $0x80,%esi
  0.07 │       mov    $0x1,%edi
  0.29 │       xor    %eax,%eax
  2.53 │       lock   cmpxchg %edi,(%r8)

And not things like that "jmpq __lll_lock_elision", that instead should behave
like a "call" instruction and "jump" to the disassembly of "___lll_lock_elision".

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-3cwx39u3h66dfw9xjrlt7ca2@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      2eff0611
  43. 21 3月, 2018 8 次提交