Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 22 8月, 2023 2 次提交
  3. 13 3月, 2023 1 次提交
  5. 29 11月, 2022 1 次提交
  7. 20 9月, 2022 1 次提交
    • D
      x86/speculation: Add RSB VM Exit protections · 3838336f
      由 Daniel Sneddon 提交于 
      stable inclusion
from stable-v5.10.136
commit 509c2c9fe75ea7493eebbb6bb2f711f37530ae19
category: bugfix
bugzilla: https://gitee.com/src-openeuler/kernel/issues/I5N1SO
CVE: CVE-2022-26373

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=509c2c9fe75ea7493eebbb6bb2f711f37530ae19

--------------------------------

commit 2b129932 upstream.

tl;dr: The Enhanced IBRS mitigation for Spectre v2 does not work as
documented for RET instructions after VM exits. Mitigate it with a new
one-entry RSB stuffing mechanism and a new LFENCE.

== Background ==

Indirect Branch Restricted Speculation (IBRS) was designed to help
mitigate Branch Target Injection and Speculative Store Bypass, i.e.
Spectre, attacks. IBRS prevents software run in less privileged modes
from affecting branch prediction in more privileged modes. IBRS requires
the MSR to be written on every privilege level change.

To overcome some of the performance issues of IBRS, Enhanced IBRS was
introduced.  eIBRS is an "always on" IBRS, in other words, just turn
it on once instead of writing the MSR on every privilege level change.
When eIBRS is enabled, more privileged modes should be protected from
less privileged modes, including protecting VMMs from guests.

== Problem ==

Here's a simplification of how guests are run on Linux' KVM:

void run_kvm_guest(void)
{
	// Prepare to run guest
	VMRESUME();
	// Clean up after guest runs
}

The execution flow for that would look something like this to the
processor:

1. Host-side: call run_kvm_guest()
2. Host-side: VMRESUME
3. Guest runs, does "CALL guest_function"
4. VM exit, host runs again
5. Host might make some "cleanup" function calls
6. Host-side: RET from run_kvm_guest()

Now, when back on the host, there are a couple of possible scenarios of
post-guest activity the host needs to do before executing host code:

* on pre-eIBRS hardware (legacy IBRS, or nothing at all), the RSB is not
touched and Linux has to do a 32-entry stuffing.

* on eIBRS hardware, VM exit with IBRS enabled, or restoring the host
IBRS=1 shortly after VM exit, has a documented side effect of flushing
the RSB except in this PBRSB situation where the software needs to stuff
the last RSB entry "by hand".

IOW, with eIBRS supported, host RET instructions should no longer be
influenced by guest behavior after the host retires a single CALL
instruction.

However, if the RET instructions are "unbalanced" with CALLs after a VM
exit as is the RET in #6, it might speculatively use the address for the
instruction after the CALL in #3 as an RSB prediction. This is a problem
since the (untrusted) guest controls this address.

Balanced CALL/RET instruction pairs such as in step #5 are not affected.

== Solution ==

The PBRSB issue affects a wide variety of Intel processors which
support eIBRS. But not all of them need mitigation. Today,
X86_FEATURE_RSB_VMEXIT triggers an RSB filling sequence that mitigates
PBRSB. Systems setting RSB_VMEXIT need no further mitigation - i.e.,
eIBRS systems which enable legacy IBRS explicitly.

However, such systems (X86_FEATURE_IBRS_ENHANCED) do not set RSB_VMEXIT
and most of them need a new mitigation.

Therefore, introduce a new feature flag X86_FEATURE_RSB_VMEXIT_LITE
which triggers a lighter-weight PBRSB mitigation versus RSB_VMEXIT.

The lighter-weight mitigation performs a CALL instruction which is
immediately followed by a speculative execution barrier (INT3). This
steers speculative execution to the barrier -- just like a retpoline
-- which ensures that speculation can never reach an unbalanced RET.
Then, ensure this CALL is retired before continuing execution with an
LFENCE.

In other words, the window of exposure is opened at VM exit where RET
behavior is troublesome. While the window is open, force RSB predictions
sampling for RET targets to a dead end at the INT3. Close the window
with the LFENCE.

There is a subset of eIBRS systems which are not vulnerable to PBRSB.
Add these systems to the cpu_vuln_whitelist[] as NO_EIBRS_PBRSB.
Future systems that aren't vulnerable will set ARCH_CAP_PBRSB_NO.

  [ bp: Massage, incorporate review comments from Andy Cooper. ]
Signed-off-by: NDaniel Sneddon <daniel.sneddon@linux.intel.com>
Co-developed-by: NPawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: NPawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

conflict:
    arch/x86/include/asm/cpufeatures.h
Signed-off-by: NChen Jiahao <chenjiahao16@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
      3838336f
  9. 16 9月, 2022 9 次提交
  11. 05 7月, 2022 2 次提交
  13. 27 4月, 2022 1 次提交
  15. 22 2月, 2022 1 次提交
  17. 29 12月, 2021 1 次提交
    • A
      tools arch x86: Sync the msr-index.h copy with the kernel sources · b9c76b02
      由 Arnaldo Carvalho de Melo 提交于 
      mainline inclusion
from mainline-5.16-rc6
commit e9bde94f
category: feature
feature: milan cpu
bugzilla: https://gitee.com/openeuler/kernel/issues/I4NX57
CVE: NA

--------------------------------

To pick up the changes in:

  d205e0f1 ("x86/{cpufeatures,msr}: Add Intel SGX Launch Control hardware bits")
  e7b6385b ("x86/cpufeatures: Add Intel SGX hardware bits")
  43756a29 ("powercap: Add AMD Fam17h RAPL support")
  298ed2b3 ("x86/msr-index: sort AMD RAPL MSRs by address")
  68299a42 ("x86/mce: Enable additional error logging on certain Intel CPUs")

That cause these changes in tooling:

  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
  $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
  $ diff -u before after
  --- before	2020-12-17 14:45:49.036994450 -0300
  +++ after	2020-12-17 14:46:01.654256639 -0300
  @@ -22,6 +22,10 @@
   	[0x00000060] = "LBR_CORE_TO",
   	[0x00000079] = "IA32_UCODE_WRITE",
   	[0x0000008b] = "IA32_UCODE_REV",
  +	[0x0000008C] = "IA32_SGXLEPUBKEYHASH0",
  +	[0x0000008D] = "IA32_SGXLEPUBKEYHASH1",
  +	[0x0000008E] = "IA32_SGXLEPUBKEYHASH2",
  +	[0x0000008F] = "IA32_SGXLEPUBKEYHASH3",
   	[0x0000009b] = "IA32_SMM_MONITOR_CTL",
   	[0x0000009e] = "IA32_SMBASE",
   	[0x000000c1] = "IA32_PERFCTR0",
  @@ -59,6 +63,7 @@
   	[0x00000179] = "IA32_MCG_CAP",
   	[0x0000017a] = "IA32_MCG_STATUS",
   	[0x0000017b] = "IA32_MCG_CTL",
  +	[0x0000017f] = "ERROR_CONTROL",
   	[0x00000180] = "IA32_MCG_EAX",
   	[0x00000181] = "IA32_MCG_EBX",
   	[0x00000182] = "IA32_MCG_ECX",
  @@ -294,6 +299,7 @@
   	[0xc0010241 - x86_AMD_V_KVM_MSRs_offset] = "F15H_NB_PERF_CTR",
   	[0xc0010280 - x86_AMD_V_KVM_MSRs_offset] = "F15H_PTSC",
   	[0xc0010299 - x86_AMD_V_KVM_MSRs_offset] = "AMD_RAPL_POWER_UNIT",
  +	[0xc001029a - x86_AMD_V_KVM_MSRs_offset] = "AMD_CORE_ENERGY_STATUS",
   	[0xc001029b - x86_AMD_V_KVM_MSRs_offset] = "AMD_PKG_ENERGY_STATUS",
   	[0xc00102f0 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PPIN_CTL",
   	[0xc00102f1 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PPIN",
  $

Which causes these parts of tools/perf/ to be rebuilt:

  CC       /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o
  LD       /tmp/build/perf/trace/beauty/tracepoints/perf-in.o
  LD       /tmp/build/perf/trace/beauty/perf-in.o
  LD       /tmp/build/perf/perf-in.o
  LINK     /tmp/build/perf/perf

At some point these should just be tables read by perf on demand.

This allows 'perf trace' users to use those strings to translate from
the msr ids provided by the msr: tracepoints.

This addresses this perf tools build warning:

  diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Victor Ding <victording@google.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

conflicts:
following patches haven't been backported:
  d205e0f1 ("x86/{cpufeatures,msr}: Add Intel SGX Launch Control
hardware bits")
  e7b6385b ("x86/cpufeatures: Add Intel SGX hardware bits")
  68299a42 ("x86/mce: Enable additional error logging on certain
Intel CPUs")
so fixing code related to above patches in this patch is not applied.
Signed-off-by: Nqinyu <qinyu16@huawei.com>
Reviewed-by: NChao Liu <liuchao173@huawei.com>
Reviewed-by: NXiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
      b9c76b02
  19. 03 6月, 2021 1 次提交
    • J
      ia64: tools: remove duplicate definition of ia64_mf() on ia64 · c1878805
      由 John Paul Adrian Glaubitz 提交于 
      stable inclusion
from stable-5.10.33
commit bed21bed2e79eb3687370bec6eaa36c4857c40db
bugzilla: 51834
CVE: NA

--------------------------------

[ Upstream commit f4bf09dc ]

The ia64_mf() macro defined in tools/arch/ia64/include/asm/barrier.h is
already defined in <asm/gcc_intrin.h> on ia64 which causes libbpf
failing to build:

    CC       /usr/src/linux/tools/bpf/bpftool//libbpf/staticobjs/libbpf.o
  In file included from /usr/src/linux/tools/include/asm/barrier.h:24,
                   from /usr/src/linux/tools/include/linux/ring_buffer.h:4,
                   from libbpf.c:37:
  /usr/src/linux/tools/include/asm/../../arch/ia64/include/asm/barrier.h:43: error: "ia64_mf" redefined [-Werror]
     43 | #define ia64_mf()       asm volatile ("mf" ::: "memory")
        |
  In file included from /usr/include/ia64-linux-gnu/asm/intrinsics.h:20,
                   from /usr/include/ia64-linux-gnu/asm/swab.h:11,
                   from /usr/include/linux/swab.h:8,
                   from /usr/include/linux/byteorder/little_endian.h:13,
                   from /usr/include/ia64-linux-gnu/asm/byteorder.h:5,
                   from /usr/src/linux/tools/include/uapi/linux/perf_event.h:20,
                   from libbpf.c:36:
  /usr/include/ia64-linux-gnu/asm/gcc_intrin.h:382: note: this is the location of the previous definition
    382 | #define ia64_mf() __asm__ volatile ("mf" ::: "memory")
        |
  cc1: all warnings being treated as errors

Thus, remove the definition from tools/arch/ia64/include/asm/barrier.h.
Signed-off-by: NJohn Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
      c1878805
  21. 06 12月, 2020 1 次提交
  23. 13 11月, 2020 1 次提交
    • A
      tools arch: Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy' · db1a8b97
      由 Arnaldo Carvalho de Melo 提交于 
      To bring in the change made in this cset:

  4d6ffa27 ("x86/lib: Change .weak to SYM_FUNC_START_WEAK for arch/x86/lib/mem*_64.S")
  6dcc5627 ("x86/asm: Change all ENTRY+ENDPROC to SYM_FUNC_*")

I needed to define SYM_FUNC_START_LOCAL() as SYM_L_GLOBAL as
mem{cpy,set}_{orig,erms} are used by 'perf bench'.

This silences these perf tools build warnings:

  Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
  diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
  Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S'
  diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Fangrui Song <maskray@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      db1a8b97
  25. 03 11月, 2020 4 次提交
    • A
      tools kvm headers: Update KVM headers from the kernel sources · aa04899a
      由 Arnaldo Carvalho de Melo 提交于 
      Some should cause changes in tooling, like the one adding LAST_EXCP, but
the way it is structured end up not making that happen.

The new SVM_EXIT_INVPCID should get used by arch/x86/util/kvm-stat.c,
in the svm_exit_reasons table.

The tools/perf/trace/beauty part has scripts to catch changes and
automagically create tables, like tools/perf/trace/beauty/kvm_ioctl.sh,
but changes are needed to make tools/perf/arch/x86/util/kvm-stat.c catch
those automatically.

These were handled by the existing scripts:

  $ tools/perf/trace/beauty/kvm_ioctl.sh > before
  $ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
  $ tools/perf/trace/beauty/kvm_ioctl.sh > after
  $ diff -u before after
  --- before	2020-11-03 08:43:52.910728608 -0300
  +++ after	2020-11-03 08:44:04.273959984 -0300
  @@ -89,6 +89,7 @@
   	[0xbf] = "SET_NESTED_STATE",
   	[0xc0] = "CLEAR_DIRTY_LOG",
   	[0xc1] = "GET_SUPPORTED_HV_CPUID",
  +	[0xc6] = "X86_SET_MSR_FILTER",
   	[0xe0] = "CREATE_DEVICE",
   	[0xe1] = "SET_DEVICE_ATTR",
   	[0xe2] = "GET_DEVICE_ATTR",
  $
  $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
  $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
  $
  $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
  $ diff -u before after
  --- before	2020-11-03 08:45:55.522225198 -0300
  +++ after	2020-11-03 08:46:12.881578666 -0300
  @@ -37,4 +37,5 @@
   	[0x71] = "VDPA_GET_STATUS",
   	[0x73] = "VDPA_GET_CONFIG",
   	[0x76] = "VDPA_GET_VRING_NUM",
  +	[0x78] = "VDPA_GET_IOVA_RANGE",
   };
  $

This addresses these perf build warnings:

  Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
  diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
  Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/sie.h' differs from latest version at 'arch/s390/include/uapi/asm/sie.h'
  diff -u tools/arch/s390/include/uapi/asm/sie.h arch/s390/include/uapi/asm/sie.h
  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
  diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h'
  diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
  Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
  diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
  Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
  diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      aa04899a
    • A
      tools arch x86: Sync the msr-index.h copy with the kernel sources · 32b734e0
      由 Arnaldo Carvalho de Melo 提交于 
      To pick up the changes in:

  29dcc60f ("x86/boot/compressed/64: Add stage1 #VC handler")
  36e1be8a ("perf/x86/amd/ibs: Fix raw sample data accumulation")
  59a854e2 ("perf/x86/intel: Support TopDown metrics on Ice Lake")
  7b2c05a1 ("perf/x86/intel: Generic support for hardware TopDown metrics")
  99e40204 ("x86/msr: Move the F15h MSRs where they belong")
  b57de6cd ("x86/sev-es: Add SEV-ES Feature Detection")
  ed7bde7a ("cpufreq: intel_pstate: Allow enable/disable energy efficiency")
  f0f2f9fe ("x86/msr-index: Define an IA32_PASID MSR")

That cause these changes in tooling:

  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
  $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
  $ diff -u before after
  --- before	2020-10-19 13:27:33.195274425 -0300
  +++ after	2020-10-19 13:27:44.144507610 -0300
  @@ -113,6 +113,8 @@
   	[0x00000309] = "CORE_PERF_FIXED_CTR0",
   	[0x0000030a] = "CORE_PERF_FIXED_CTR1",
   	[0x0000030b] = "CORE_PERF_FIXED_CTR2",
  +	[0x0000030c] = "CORE_PERF_FIXED_CTR3",
  +	[0x00000329] = "PERF_METRICS",
   	[0x00000345] = "IA32_PERF_CAPABILITIES",
   	[0x0000038d] = "CORE_PERF_FIXED_CTR_CTRL",
   	[0x0000038e] = "CORE_PERF_GLOBAL_STATUS",
  @@ -222,6 +224,7 @@
   	[0x00000774] = "HWP_REQUEST",
   	[0x00000777] = "HWP_STATUS",
   	[0x00000d90] = "IA32_BNDCFGS",
  +	[0x00000d93] = "IA32_PASID",
   	[0x00000da0] = "IA32_XSS",
   	[0x00000dc0] = "LBR_INFO_0",
   	[0x00000ffc] = "IA32_BNDCFGS_RSVD",
  @@ -279,6 +282,7 @@
   	[0xc0010115 - x86_AMD_V_KVM_MSRs_offset] = "VM_IGNNE",
   	[0xc0010117 - x86_AMD_V_KVM_MSRs_offset] = "VM_HSAVE_PA",
   	[0xc001011f - x86_AMD_V_KVM_MSRs_offset] = "AMD64_VIRT_SPEC_CTRL",
  +	[0xc0010130 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV_ES_GHCB",
   	[0xc0010131 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV",
   	[0xc0010140 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_OSVW_ID_LENGTH",
   	[0xc0010141 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_OSVW_STATUS",
  $

Which causes these parts of tools/perf/ to be rebuilt:

  CC       /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o
  DESCEND  plugins
  GEN      /tmp/build/perf/python/perf.so
  INSTALL  trace_plugins
  LD       /tmp/build/perf/trace/beauty/tracepoints/perf-in.o
  LD       /tmp/build/perf/trace/beauty/perf-in.o
  LD       /tmp/build/perf/perf-in.o
  LINK     /tmp/build/perf/per

At some point these should just be tables read by perf on demand.

This addresses this perf tools build warning:

  diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      32b734e0
    • A
      tools x86 headers: Update required-features.h header from the kernel · 8b2fc25a
      由 Arnaldo Carvalho de Melo 提交于 
      To pick the changes from:

  ecac7181 ("x86/paravirt: Use CONFIG_PARAVIRT_XXL instead of CONFIG_PARAVIRT")

That don entail any changes in tooling, just addressing these perf tools
build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/required-features.h' differs from latest version at 'arch/x86/include/asm/required-features.h'
  diff -u tools/arch/x86/include/asm/required-features.h arch/x86/include/asm/required-features.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      8b2fc25a
    • A
      tools x86 headers: Update cpufeatures.h headers copies · 40a6bbf5
      由 Arnaldo Carvalho de Melo 提交于 
      To pick the changes from:

  5866e920 ("x86/cpu: Add hardware-enforced cache coherency as a CPUID feature")
  ff4f8281 ("x86/cpufeatures: Enumerate ENQCMD and ENQCMDS instructions")
  360e7c5c ("x86/cpufeatures: Add SEV-ES CPU feature")
  18ec63fa ("x86/cpufeatures: Enumerate TSX suspend load address tracking instructions")
  e48cb1a3 ("x86/resctrl: Enumerate per-thread MBA controls")

Which don't cause any changes in tooling, just addresses these build
warnings:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
  diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
  diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Cc: Kyung Min Park <kyung.min.park@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      40a6bbf5
  27. 15 10月, 2020 1 次提交
  29. 06 10月, 2020 1 次提交
    • D
      x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}() · ec6347bb
      由 Dan Williams 提交于 
      In reaction to a proposal to introduce a memcpy_mcsafe_fast()
implementation Linus points out that memcpy_mcsafe() is poorly named
relative to communicating the scope of the interface. Specifically what
addresses are valid to pass as source, destination, and what faults /
exceptions are handled.

Of particular concern is that even though x86 might be able to handle
the semantics of copy_mc_to_user() with its common copy_user_generic()
implementation other archs likely need / want an explicit path for this
case:

  On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote:
  >
  > On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote:
  > >
  > > However now I see that copy_user_generic() works for the wrong reason.
  > > It works because the exception on the source address due to poison
  > > looks no different than a write fault on the user address to the
  > > caller, it's still just a short copy. So it makes copy_to_user() work
  > > for the wrong reason relative to the name.
  >
  > Right.
  >
  > And it won't work that way on other architectures. On x86, we have a
  > generic function that can take faults on either side, and we use it
  > for both cases (and for the "in_user" case too), but that's an
  > artifact of the architecture oddity.
  >
  > In fact, it's probably wrong even on x86 - because it can hide bugs -
  > but writing those things is painful enough that everybody prefers
  > having just one function.

Replace a single top-level memcpy_mcsafe() with either
copy_mc_to_user(), or copy_mc_to_kernel().

Introduce an x86 copy_mc_fragile() name as the rename for the
low-level x86 implementation formerly named memcpy_mcsafe(). It is used
as the slow / careful backend that is supplanted by a fast
copy_mc_generic() in a follow-on patch.

One side-effect of this reorganization is that separating copy_mc_64.S
to its own file means that perf no longer needs to track dependencies
for its memcpy_64.S benchmarks.

 [ bp: Massage a bit. ]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NTony Luck <tony.luck@intel.com>
Acked-by: NMichael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com
Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
      ec6347bb
  31. 10 9月, 2020 1 次提交
  33. 08 9月, 2020 1 次提交
  35. 12 8月, 2020 1 次提交
    • A
      tools headers kvm s390: Sync headers with the kernel sources · 23db762b
      由 Arnaldo Carvalho de Melo 提交于 
      To pick the changes in:

  23a60f83 ("s390/kvm: diagnose 0x318 sync and reset")

None of them trigger any changes in tooling, this time this is just to silence
these perf build warnings:

  Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/kvm.h' differs from latest version at 'arch/s390/include/uapi/asm/kvm.h'
  diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Collin Walling <walling@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      23db762b
  37. 07 8月, 2020 4 次提交
    • A
      perf tools powerpc: Add support for extended regs in power10 · 66655986
      由 Athira Rajeev 提交于 
      Added support for supported regs which are new in power10 ( MMCR3,
SIER2, SIER3 ) to sample_reg_mask in the tool side to use with `-I?`
option. Also added PVR check to send extended mask for power10 at kernel
while capturing extended regs in each sample.
Signed-off-by: NAthira Jajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: NKajol Jain <kjain@linux.ibm.com>
Reviewed-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      66655986
    • A
      perf tools powerpc: Add support for extended register capability · 33583e69
      由 Anju T Sudhakar 提交于 
      Add extended regs to sample_reg_mask in the tool side to use with `-I?`
option. Perf tools side uses extended mask to display the platform
supported register names (with -I? option) to the user and also send
this mask to the kernel to capture the extended registers in each
sample. Hence decide the mask value based on the processor version.

Currently definitions for `mfspr`, `SPRN_PVR` are part of
`arch/powerpc/util/header.c`. Move this to a header file so that these
definitions can be re-used in other source files as well.
Signed-off-by: NAnju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: NKajol Jain <kjain@linux.ibm.com>
Reviewed-by: NMadhavan Srinivasan <maddy@linux.vnet.ibm.com>
Reviewed--by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org> <mikey@neuling.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
[Decide extended mask at run time based on platform]
Signed-off-by: NAthira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      33583e69
    • A
      tools arch x86: Sync asm/cpufeatures.h with the kernel sources · dd4a5c22
      由 Arnaldo Carvalho de Melo 提交于 
      To pick up the changes from:

  85b23fbc ("x86/cpufeatures: Add enumeration for SERIALIZE instruction")
  bd657aa3 ("x86/cpufeatures: Add Architectural LBRs feature bit")
  fbd5969d ("x86/cpufeatures: Mark two free bits in word 3")

These should't cause any changes in tooling, it just gets rebuilt by
including those headers:

  CC       /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
  CC       /tmp/build/perf/bench/mem-memset-x86-64-asm.o
  LD       /tmp/build/perf/bench/perf-in.o
  LD       /tmp/build/perf/perf-in.o
  LINK     /tmp/build/perf/perf

And silences this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
  diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      dd4a5c22
    • A
      tools arch x86: Sync the msr-index.h copy with the kernel sources · f815fe51
      由 Arnaldo Carvalho de Melo 提交于 
      To pick up the changes in:

  d6a162a4 x86/msr-index: Add bunch of MSRs for Arch LBR
  ed7bde7a cpufreq: intel_pstate: Allow enable/disable energy efficiency
  99e40204 (tip/x86/cleanups) x86/msr: Move the F15h MSRs where they belong
  1068ed45 x86/msr: Lift AMD family 0x15 power-specific MSRs
  5cde2653 (tag: perf-core-2020-06-01) perf/x86/rapl: Add AMD Fam17h RAPL support

Addressing these tools/perf build warnings:

That makes the beautification scripts to pick some new entries:

  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
  $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
  $ diff -u before after
  --- before	2020-08-07 08:45:18.801298854 -0300
  +++ after	2020-08-07 08:45:28.654456422 -0300
  @@ -271,6 +271,8 @@
   	[0xc0010062 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PERF_CTL",
   	[0xc0010063 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PERF_STATUS",
   	[0xc0010064 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PSTATE_DEF_BASE",
  +	[0xc001007a - x86_AMD_V_KVM_MSRs_offset] = "F15H_CU_PWR_ACCUMULATOR",
  +	[0xc001007b - x86_AMD_V_KVM_MSRs_offset] = "F15H_CU_MAX_PWR_ACCUMULATOR",
   	[0xc0010112 - x86_AMD_V_KVM_MSRs_offset] = "K8_TSEG_ADDR",
   	[0xc0010113 - x86_AMD_V_KVM_MSRs_offset] = "K8_TSEG_MASK",
   	[0xc0010114 - x86_AMD_V_KVM_MSRs_offset] = "VM_CR",
  $

And this gets rebuilt:

  CC       /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o
  INSTALL  trace_plugins
  LD       /tmp/build/perf/trace/beauty/tracepoints/perf-in.o
  LD       /tmp/build/perf/trace/beauty/perf-in.o
  LD       /tmp/build/perf/perf-in.o
  LINK     /tmp/build/perf/perf

Now one can trace systemwide asking to see backtraces to where those
MSRs are being read/written with:

  # perf trace -e msr:*_msr/max-stack=32/ --filter="msr==F15H_CU_PWR_ACCUMULATOR || msr==F15H_CU_MAX_PWR_ACCUMULATOR"
  ^C#
  #

If we use -v (verbose mode) we can see what it does behind the scenes:

  # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==F15H_CU_PWR_ACCUMULATOR || msr==F15H_CU_MAX_PWR_ACCUMULATOR"
  Using CPUID GenuineIntel-6-8E-A
  0xc001007a
  0xc001007b
  New filter for msr:read_msr: (msr==0xc001007a || msr==0xc001007b) && (common_pid != 2448054 && common_pid != 2782)
  0xc001007a
  0xc001007b
  New filter for msr:write_msr: (msr==0xc001007a || msr==0xc001007b) && (common_pid != 2448054 && common_pid != 2782)
  mmap size 528384B
  ^C#

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f815fe51
  39. 31 7月, 2020 1 次提交
  41. 22 7月, 2020 1 次提交
  43. 17 7月, 2020 1 次提交
    • A
      tools arch kvm: Sync kvm headers with the kernel sources · 25d4e7f5
      由 Arnaldo Carvalho de Melo 提交于 
      To pick up the changes from:

  83d31e52 ("KVM: nVMX: fixes for preemption timer migration")

That don't entail changes in tooling.

This silences these tools/perf build warnings:

  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
  diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      25d4e7f5
  45. 03 7月, 2020 1 次提交
  47. 22 6月, 2020 1 次提交
    • B
      x86/msr: Move the F15h MSRs where they belong · 99e40204
      由 Borislav Petkov 提交于 
      1068ed45 ("x86/msr: Lift AMD family 0x15 power-specific MSRs")

moved the three F15h power MSRs to the architectural list but that was
wrong as they belong in the family 0x15 list. That also caused:

  In file included from trace/beauty/tracepoints/x86_msr.c:10:
  perf/trace/beauty/generated/x86_arch_MSRs_array.c:292:45: error: initialized field overwritten [-Werror=override-init]
    292 |  [0xc0010280 - x86_AMD_V_KVM_MSRs_offset] = "F15H_PTSC",
        |                                             ^~~~~~~~~~~
  perf/trace/beauty/generated/x86_arch_MSRs_array.c:292:45: note: (near initialization for 'x86_AMD_V_KVM_MSRs[640]')

due to MSR_F15H_PTSC ending up being defined twice. Move them where they
belong and drop the duplicate.

Also, drop the respective tools/ changes of the msr-index.h copy the
above commit added because perf tool developers prefer to go through
those changes themselves in order to figure out whether changes to the
kernel headers would need additional handling in perf.

Fixes: 1068ed45 ("x86/msr: Lift AMD family 0x15 power-specific MSRs")
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lkml.kernel.org/r/20200621163323.14e8533f@canb.auug.org.au
      99e40204