- 09 1月, 2012 1 次提交
-
-
由 Jaecheol Lee 提交于
To support various EXYNOS series SoCs commonly, added exynos common structure. exynos-cpufreq.c => EXYNOS series common cpufreq driver exynos4210-cpufreq.c => EXYNOS4210 support cpufreq driver Signed-off-by: NJaecheol Lee <jc.lee@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
- 06 1月, 2012 5 次提交
-
-
由 Andreas Herrmann 提交于
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Andreas Herrmann 提交于
The driver uses the pstate number from the status register as index in its table of ACPI pstates (powernow_table). This is wrong as this is not a 1-to-1 mapping. For example we can have _PSS information to just utilize Pstate 0 and Pstate 4, ie. powernow-k8: Core Performance Boosting: on. powernow-k8: 0 : pstate 0 (2200 MHz) powernow-k8: 1 : pstate 4 (1400 MHz) In this example the driver's powernow_table has just 2 entries. Using the pstate number (4) as index into this table is just plain wrong. Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Andreas Herrmann 提交于
Due to CPB we can't directly map SW Pstates to Pstate MSRs. Get rid of the paranoia check. (assuming that the ACPI Pstate information is correct.) Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Afzal Mohammed 提交于
During scaling up of cpu frequency, loops_per_jiffy is updated upon invoking PRECHANGE notifier. If setting to new frequency fails in cpufreq driver, lpj is left at incorrect value. Hence update lpj only if cpu frequency is changed, i.e. upon invoking POSTCHANGE notifier. Penalty would be that during time period between changing cpu frequency & invocation of POSTCHANGE notifier, udelay(x) may not gurantee minimal delay of 'x' us for frequency scaling up operation. Perhaps a better solution would be to define CPUFREQ_ABORTCHANGE & handle accordingly, but then it would be more intrusive (using ABORTCHANGE may help drivers also; if any has registered notifier and expect POST for a PRECHANGE, their needs can be taken care using ABORT) Signed-off-by: NAfzal Mohammed <afzal@ti.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Afzal Mohammed 提交于
CPU frequency is guranteed to be changed on notifier callback with CPUFREQ_POSTCHANGE. Notifier callback with CPUFREQ_PRECHANGE does not gurantee a change in frequency; after it, if cpufreq driver is unable to change CPU to new frequency. This results in wrong information being fed to user (if setting CPU frequency fails) upon doing like, cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed Hence in userspace governer update cpu_cur_freq only if notifier has been called with POSTCHANGE. Signed-off-by: NAfzal Mohammed <afzal@ti.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
- 09 12月, 2011 5 次提交
-
-
由 Kamalesh Babulal 提交于
CPUFREQ Remove wall variable from cpufreq_gov_dbs_init() Remove wall variable from cpufreq_gov_dbs_init() as get_cpu_idle_time_us() no longer updates the last_update_time unconditionally. Passing non-NULL last_update_time address will result in accounting additional idle time with update_ts_time_stats() before returning idle_sleeptime. Signed-off-by: NKamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: NDave Jones <davej@redhat.com> -- drivers/cpufreq/cpufreq_ondemand.c | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-)
-
由 Jaecheol Lee 提交于
This patch is modify code for stable working 1. Remove unused register access code 2. Change sequence for frequency changing Signed-off-by: NJaecheol Lee <jc.lee@samsung.com> Signed-off-by: NJonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: NJongpill Lee <boyko.lee@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Jaecheol Lee 提交于
This patch is changes frequency table for cpu divider for stable frequency. Signed-off-by: NJaecheol Lee <jc.lee@samsung.com> Signed-off-by: NJongpill Lee <boyko.lee@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Jaecheol Lee 提交于
This patch removes code for bus on cpufreq because the code for bus frequency changing moves to busfreq driver. So code about bus on cpufreq is not necessary. Signed-off-by: NJaecheol Lee <jc.lee@samsung.com> Signed-off-by: NJongpill Lee <boyko.lee@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Mark Brown 提交于
They're already consistent but it saves remembering to do so. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
- 03 12月, 2011 1 次提交
-
-
由 Dave Jones 提交于
Merge branch 'for_3.3/omap-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into next
-
- 02 12月, 2011 12 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits) netfilter: Remove ADVANCED dependency from NF_CONNTRACK_NETBIOS_NS ipv4: flush route cache after change accept_local sch_red: fix red_change Revert "udp: remove redundant variable" bridge: master device stuck in no-carrier state forever when in user-stp mode ipv4: Perform peer validation on cached route lookup. net/core: fix rollback handler in register_netdevice_notifier sch_red: fix red_calc_qavg_from_idle_time bonding: only use primary address for ARP ipv4: fix lockdep splat in rt_cache_seq_show sch_teql: fix lockdep splat net: fec: Select the FEC driver by default for i.MX SoCs isdn: avoid copying too long drvid isdn: make sure strings are null terminated netlabel: Fix build problems when IPv6 is not enabled sctp: better integer overflow check in sctp_auth_create_key() sctp: integer overflow in sctp_auth_create_key() ipv6: Set mcast_hops to IPV6_DEFAULT_MCASTHOPS when -1 was given. net: Fix corruption in /proc/*/net/dev_mcast mac80211: fix race between the AGG SM and the Tx data path ...
-
由 David S. Miller 提交于
firewalld in Fedora 16 needs this. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Pan(潘卫平) 提交于
After reset ipv4_devconf->data[IPV4_DEVCONF_ACCEPT_LOCAL] to 0, we should flush route cache, or it will continue receive packets with local source address, which should be dropped. Signed-off-by: NWeiping Pan <panweiping3@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Le mercredi 30 novembre 2011 à 14:36 -0800, Stephen Hemminger a écrit : > (Almost) nobody uses RED because they can't figure it out. > According to Wikipedia, VJ says that: > "there are not one, but two bugs in classic RED." RED is useful for high throughput routers, I doubt many linux machines act as such devices. I was considering adding Adaptative RED (Sally Floyd, Ramakrishna Gummadi, Scott Shender), August 2001 In this version, maxp is dynamic (from 1% to 50%), and user only have to setup min_th (target average queue size) (max_th and wq (burst in linux RED) are automatically setup) By the way it seems we have a small bug in red_change() if (skb_queue_empty(&sch->q)) red_end_of_idle_period(&q->parms); First, if queue is empty, we should call red_start_of_idle_period(&q->parms); Second, since we dont use anymore sch->q, but q->qdisc, the test is meaningless. Oh well... [PATCH] sch_red: fix red_change() Now RED is classful, we must check q->qdisc->q.qlen, and if queue is empty, we start an idle period, not end it. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (31 commits) ocfs2: avoid unaligned access to dqc_bitmap ocfs2: Use filemap_write_and_wait() instead of write_inode_now() ocfs2: honor O_(D)SYNC flag in fallocate ocfs2: Add a missing journal credit in ocfs2_link_credits() -v2 ocfs2: send correct UUID to cleancache initialization ocfs2: Commit transactions in error cases -v2 ocfs2: make direntry invalid when deleting it fs/ocfs2/dlm/dlmlock.c: free kmem_cache_zalloc'd data using kmem_cache_free ocfs2: Avoid livelock in ocfs2_readpage() ocfs2: serialize unaligned aio ocfs2: Implement llseek() ocfs2: Fix ocfs2_page_mkwrite() ocfs2: Add comment about orphan scanning ocfs2: Clean up messages in the fs ocfs2/cluster: Cluster up now includes network connections too ocfs2/cluster: Add new function o2net_fill_node_map() ocfs2/cluster: Fix output in file elapsed_time_in_ms ocfs2/dlm: dlmlock_remote() needs to account for remastery ocfs2/dlm: Take inflight reference count for remotely mastered resources too ocfs2/dlm: Cleanup dlm_wait_for_node_death() and dlm_wait_for_node_recovery() ...
-
由 Akinobu Mita 提交于
The dqc_bitmap field of struct ocfs2_local_disk_chunk is 32-bit aligned, but not 64-bit aligned. The dqc_bitmap is accessed by ocfs2_set_bit(), ocfs2_clear_bit(), ocfs2_test_bit(), or ocfs2_find_next_zero_bit(). These are wrapper macros for ext2_*_bit() which need to take an unsigned long aligned address (though some architectures are able to handle unaligned address correctly) So some 64bit architectures may not be able to access the dqc_bitmap correctly. This avoids such unaligned access by using another wrapper functions for ext2_*_bit(). The code is taken from fs/ext4/mballoc.c which also need to handle unaligned bitmap access. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Acked-by: NJoel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJoel Becker <jlbec@evilplan.org>
-
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm由 Linus Torvalds 提交于
* 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7182/1: ARM cpu topology: fix warning ARM: 7181/1: Restrict kprobes probing SWP instructions to ARMv5 and below ARM: 7180/1: Change kprobes testcase with unpredictable STRD instruction ARM: 7177/1: GIC: avoid skipping non-existent PPIs in irq_start calculation ARM: 7176/1: cpu_pm: register GIC PM notifier only once ARM: 7175/1: add subname parameter to mfp_set_groupg callers ARM: 7174/1: Fix build error in kprobes test code on Thumb2 kernels ARM: 7172/1: dma: Drop GFP_COMP for DMA memory allocations ARM: 7171/1: unwind: add unwind directives to bitops assembly macros ARM: 7170/2: fix compilation breakage in entry-armv.S ARM: 7168/1: use cache type functions for arch_get_unmapped_area ARM: perf: check that we have a platform device when reserving PMU ARM: 7166/1: Use PMD_SHIFT instead of PGDIR_SHIFT in dma-consistent.c ARM: 7165/2: PL330: Fix typo in _prepare_ccr() ARM: 7163/2: PL330: Only register usable channels ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds ARM: 7161/1: errata: no automatic store buffer drain ARM: perf: initialise used_mask for fake PMU during validation ARM: PMU: remove pmu_init declaration ARM: PMU: re-export release_pmu symbol to modules
-
由 David S. Miller 提交于
This reverts commit 81d54ec8. If we take the "try_again" goto, due to a checksum error, the 'len' has already been truncated. So we won't compute the same values as the original code did. Reported-by: Npaul bilke <fsmail@conspiracy.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vitalii Demianets 提交于
When in user-stp mode, bridge master do not follow state of its slaves, so after the following sequence of events it can stuck forever in no-carrier state: 1) turn stp off 2) put all slaves down - master device will follow their state and also go in no-carrier state 3) turn stp on with bridge-stp script returning 0 (go to the user-stp mode) Now bridge master won't follow slaves' state and will never reach running state. This patch solves the problem by making user-stp and kernel-stp behavior similar regarding master following slaves' states. Signed-off-by: NVitalii Demianets <vitas@nppfactor.kiev.ua> Acked-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Otherwise we won't notice the peer GENID change. Reported-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix meta data raid-repair merge problem Btrfs: skip allocation attempt from empty cluster Btrfs: skip block groups without enough space for a cluster Btrfs: start search for new cluster at the beginning Btrfs: reset cluster's max_size when creating bitmap Btrfs: initialize new bitmaps' list Btrfs: fix oops when calling statfs on readonly device Btrfs: Don't error on resizing FS to same size Btrfs: fix deadlock on metadata reservation when evicting a inode Fix URL of btrfs-progs git repository in docs btrfs scrub: handle -ENOMEM from init_ipath()
-
- 01 12月, 2011 16 次提交
-
-
由 Jan Schmidt 提交于
Commit 4a54c8c1 introduced raid-repair, killing the individual readpage_io_failed_hook entries from inode.c and disk-io.c. Commit 4bb31e92 introduced new readahead code, adding a readpage_io_failed_hook to disk-io.c. The raid-repair commit had logic to disable raid-repair, if readpage_io_failed_hook is set. Thus, the readahead commit effectively disabled raid-repair for meta data. This commit changes the logic to always attempt raid-repair when needed and call the readpage_io_failed_hook in case raid-repair fails. This is much more straight forward and should have been like that from the beginning. Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net> Reported-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 RongQing.Li 提交于
Within nested statements, the break statement terminates only the do, for, switch, or while statement that immediately encloses it, So replace the break with goto. Signed-off-by: NRongQing.Li <roy.qing.li@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Since commit a4a710c4 (pkt_sched: Change PSCHED_SHIFT from 10 to 6) it seems RED/GRED are broken. red_calc_qavg_from_idle_time() computes a delay in us units, but this delay is now 16 times bigger than real delay, so the final qavg result smaller than expected. Use standard kernel time services since there is no need to obfuscate them. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Henrik Saavedra Persson 提交于
Only use the primary address of the bond device for master_ip. This will prevent changing the ARP source address in Active-Backup mode whenever a secondry address is added to the bond device. Signed-off-by: NHenrik Saavedra Persson <henrik.e.persson@ericsson.com> Signed-off-by: NAndy Gospodarek <andy@greyhouse.net> Signed-off-by: NDavid S. Miller <davem@drr.davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB: Fix RCU lockdep splats IB/ipoib: Prevent hung task or softlockup processing multicast response IB/qib: Fix over-scheduling of QSFP work RDMA/cxgb4: Fix retry with MPAv1 logic for MPAv2 RDMA/cxgb4: Fix iw_cxgb4 count_rcqes() logic IB/qib: Don't use schedule_work()
-
git://sources.calxeda.com/kernel/linux由 Linus Torvalds 提交于
* 'dt-for-linus' of git://sources.calxeda.com/kernel/linux: of: Add Silicon Image vendor prefix of/irq: of_irq_init: add check for parent equal to child node
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: twl: fix twl4030 support for smps regulators regulator: fix use after free bug regulator: aat2870: Fix the logic of checking if no id is matched in aat2870_get_regulator
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) ARM: ux500: update defconfig ARM: u300: update defconfig ARM: at91: enable additional boards in existing soc defconfig files ARM: at91: refresh soc defconfig files for 3.2 ARM: at91: rename defconfig files appropriately ARM: OMAP2+: Fix Compilation error when omap_l3_noc built as module ARM: OMAP2+: Remove empty io.h ARM: OMAP2: select ARM_AMBA if OMAP3_EMU is defined ARM: OMAP: smartreflex: fix IRQ handling bug ARM: OMAP: PM: only register TWL with voltage layer when device is present ARM: OMAP: hwmod: Fix the addr space, irq, dma count APIs arm: mx28: fix bit operation in clock setting ARM: imx: export imx_ioremap ARM: imx/mm-imx3: conditionally compile i.MX31 and i.MX35 code ARM: mx5: Fix checkpatch warnings in cpu-imx5.c MAINTAINERS: Add missing directory ARM: imx: drop 'ARCH_MX31' and 'ARCH_MX35' ARM: imx6q: move clock register map to machine_desc.map_io ARM: pxa168/gplugd: add the correct SSP device ARM: Update mach-types to fix mxs build breakage ...
-
由 Vincent Guittot 提交于
kernel/sched.c:7354:2: warning: initialization from incompatible pointer type Align cpu_coregroup_mask prototype interface with sched_domain_mask_f typedef use int cpu instead of unsigned int cpu Cc: <stable@vger.kernel.org> Signed-off-by: NVincent Guittot <vincent.guittot@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Jon Medhurst (Tixy) 提交于
The SWP instruction is deprecated on ARMv6 and with ARMv7 it will be UNDEFINED when CONFIG_SWP_EMULATE is selected. In this case, probing a SWP instruction will cause an oops when the kprobes emulation code executes an undefined instruction. As the SWP instruction should be rare or non-existent in kernels for ARMv6 and later, we can simply avoid these problems by not allowing probing of these. Reported-by: NLeif Lindholm <leif.lindholm@arm.com> Tested-by: NLeif Lindholm <leif.lindholm@arm.com> Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: NJon Medhurst <tixy@yxit.co.uk> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Jon Medhurst (Tixy) 提交于
There is a kprobes testcase for the instruction "strd r2, [r3], r4". This has unpredictable behaviour as it uses r3 for register writeback addressing and also stores it to memory. On a cortex A9, this testcase would fail because the instruction writes the updated value of r3 to memory, whereas the kprobes emulation code writes the original value. Fix this by changing testcase to used r5 instead of r3. Reported-by: NLeif Lindholm <leif.lindholm@arm.com> Tested-by: NLeif Lindholm <leif.lindholm@arm.com> Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: NJon Medhurst <tixy@yxit.co.uk> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Eric Dumazet 提交于
After commit f2c31e32 (fix NULL dereferences in check_peer_redir()), dst_get_neighbour() should be guarded by rcu_read_lock() / rcu_read_unlock() section. Reported-by: NMiles Lane <miles.lane@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We need rcu_read_lock() protection before using dst_get_neighbour(), and we must cache its value (pass it to __teql_resolve()) teql_master_xmit() is called under rcu_read_lock_bh() protection, its not enough. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabio Estevam 提交于
Since commit 230dec61 (net/fec: add imx6q enet support) the FEC driver is no longer built by default for i.MX SoCs. Let the FEC driver be built by default again. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Suggested-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de Acked-by: NShawn Guo <shawn.guo@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
由 Alexandre Oliva 提交于
If we don't have a cluster, don't bother trying to allocate from it, jumping right away to the attempt to allocate a new cluster. Signed-off-by: NAlexandre Oliva <oliva@lsd.ic.unicamp.br> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-