If fbdev uses a shadow framebuffer, call the damage handler. Otherwise
the update might not make it to the screen.

v2:
	* mark virtual screen as dirty (Ville)
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Fixes: 222ec45f ("drm/fb_helper: Support framebuffers in I/O memory")
Acked-by: NMaxime Ripard <mripard@kernel.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: virtualization@lists.linux-foundation.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-2-tzimmermann@suse.de

Cached page mappings are now the default for SHMEM GEM objects. Remove
the obsolete create function for cached mappings.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NMaxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117133156.26822-3-tzimmermann@suse.de

SHMEM-buffer backing storage is allocated from system memory; which is
typically cachable. The default mode for SHMEM objects is writecombine
though.

Unify SHMEM semantics by defaulting to cached mappings. The exception
is pages imported via dma-buf. DMA memory is usually not cached.

DRM drivers that require write-combined mappings set the map_wc flag
in struct drm_gem_shmem_object to true. This currently affects lima,
panfrost and v3d.

The drivers mgag200, udl, virtio and vkms continue to use default
shmem mappings.

The drivers cirrus and gm12u320 change caching flags. Both used
writecombine and now switch over to shmem defaults. Both drivers use
SHMEM objects as shadow buffers for internal video memory, so cached
mappings will not affect them negatively.

v3:
	* set value of shmem pointer before dereferencing it in
	  __drm_gem_shmem_create() (Dan, kernel test robot)
v2:
	* recreate patch on top of latest SHMEM helpers
	* update lima, panfrost, v3d to select writecombine (Daniel, Rob)
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NMaxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117133156.26822-2-tzimmermann@suse.de

"val" isn't initialized on the default: errorpath.
Just return from the function if this happens.
Reported-by: Nkernel test robot <lkp@intel.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201119140707.1008407-1-linus.walleij@linaro.org

This implements support for DPI output using the port node
in the device tree to connect a DPI LCD display to the
MCDE. The block also supports TV-out but we leave that
for another day when we have a hardware using it.

We implement parsing and handling of the "port" node,
and follow that to the DPI endpoint.

The clock divider used by the MCDE to divide down the
"lcdclk" (this has been designed for TV-like frequencies)
is represented by an ordinary clock provider internally
in the MCDE. This idea was inspired by the PL111 solution
by Eric Anholt: the divider also works very similar to
the Pl111 clock divider.

We take care to clear up some errors regarding the number
of available formatters and their type. We have 6 DSI
formatters and 2 DPI formatters.

Tested on the Samsung GT-I9070 Janice mobile phone.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: phone-devel@vger.kernel.org
Cc: upstreaming@lists.sr.ht
Link: https://patchwork.freedesktop.org/patch/msgid/20201112142925.2571179-2-linus.walleij@linaro.org

To be able to support DPI without messing things up we
first break out the DSI set-up to a separate function.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: phone-devel@vger.kernel.org
Cc: upstreaming@lists.sr.ht
Link: https://patchwork.freedesktop.org/patch/msgid/20201112142925.2571179-1-linus.walleij@linaro.org

I was confused when the graphics came out with blue
penguins on the DPI panel.

It turns out that the so-called "packed RGB666" mode
on the DSI formatter is incorrect: this mode is the
actual RGB888 mode, and the mode called RGB888 is
BGR888.

The claims that the MCDE had inverse RGB/BGR buffer
formats was wrong, so correct this and the buggy
register and everything is much more consistent, and
graphics look good on all targets, both DPI and
DSI.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Cc: phone-devel@vger.kernel.org
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117175413.869871-1-linus.walleij@linaro.org

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a fallthrough pseudo-keyword.

Link: https://github.com/KSPP/linux/issues/115Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/0eedb3972a0032da4997a2a47cf0665fbe9c56ca.1605896060.git.gustavoars@kernel.org

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.

Link: https://github.com/KSPP/linux/issues/115Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/9c1dcb12aae7c7ff0907ffb99ffd227656cbe444.1605896060.git.gustavoars@kernel.org

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.

Link: https://github.com/KSPP/linux/issues/115Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/c21a588bf9e222826f6b138db91de26a2b21df33.1605896060.git.gustavoars@kernel.org

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.

Link: https://github.com/KSPP/linux/issues/115Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/111e9d3d55c686892357aa5269022024b4d48330.1605896059.git.gustavoars@kernel.org

While the system heap can return non-contiguous pages,
try to allocate larger order pages if possible.

This will allow slight performance gains and make implementing
page pooling easier.

Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: Ørjan Eide <orjan.eide@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ezequiel Garcia <ezequiel@collabora.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: James Jones <jajones@nvidia.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: NBrian Starkey <brian.starkey@arm.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201121235002.69945-6-john.stultz@linaro.org

This patch is basically a port of Ørjan Eide's similar patch for ION
 https://lore.kernel.org/lkml/20200414134629.54567-1-orjan.eide@arm.com/

Only sync the sg-list of dma-buf heap attachment when the attachment
is actually mapped on the device.

dma-bufs may be synced at any time. It can be reached from user space
via DMA_BUF_IOCTL_SYNC, so there are no guarantees from callers on when
syncs may be attempted, and dma_buf_end_cpu_access() and
dma_buf_begin_cpu_access() may not be paired.

Since the sg_list's dma_address isn't set up until the buffer is used
on the device, and dma_map_sg() is called on it, the dma_address will be
NULL if sync is attempted on the dma-buf before it's mapped on a device.

Before v5.0 (commit 55897af6 ("dma-direct: merge swiotlb_dma_ops
into the dma_direct code")) this was a problem as the dma-api (at least
the swiotlb_dma_ops on arm64) would use the potentially invalid
dma_address. How that failed depended on how the device handled physical
address 0. If 0 was a valid address to physical ram, that page would get
flushed a lot, while the actual pages in the buffer would not get synced
correctly. While if 0 is an invalid physical address it may cause a
fault and trigger a crash.

In v5.0 this was incidentally fixed by commit 55897af6 ("dma-direct:
merge swiotlb_dma_ops into the dma_direct code"), as this moved the
dma-api to use the page pointer in the sg_list, and (for Ion buffers at
least) this will always be valid if the sg_list exists at all.

But, this issue is re-introduced in v5.3 with
commit 449fa54d ("dma-direct: correct the physical addr in
dma_direct_sync_sg_for_cpu/device") moves the dma-api back to the old
behaviour and picks the dma_address that may be invalid.

dma-buf core doesn't ensure that the buffer is mapped on the device, and
thus have a valid sg_list, before calling the exporter's
begin_cpu_access.

Logic and commit message originally by: Ørjan Eide <orjan.eide@arm.com>

Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: Ørjan Eide <orjan.eide@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ezequiel Garcia <ezequiel@collabora.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: James Jones <jajones@nvidia.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: NBrian Starkey <brian.starkey@arm.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201121235002.69945-5-john.stultz@linaro.org

The heap-helpers code was not as generic as initially hoped
and it is now not being used, so remove it from the tree.

Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: Ørjan Eide <orjan.eide@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ezequiel Garcia <ezequiel@collabora.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: James Jones <jajones@nvidia.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: NBrian Starkey <brian.starkey@arm.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201121235002.69945-4-john.stultz@linaro.org

Since the heap-helpers logic ended up not being as generic as
hoped, move the heap-helpers dma_buf_ops implementations into
the cma_heap directly.

This will allow us to remove the heap_helpers code in a following
patch.

Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: Ørjan Eide <orjan.eide@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ezequiel Garcia <ezequiel@collabora.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: James Jones <jajones@nvidia.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: NBrian Starkey <brian.starkey@arm.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201121235002.69945-3-john.stultz@linaro.org

In preparation for some patches to optmize the system
heap code, rework the dmabuf exporter to utilize sgtables rather
then pageslists for tracking the associated pages.

This will allow for large order page allocations, as well as
more efficient page pooling.

In doing so, the system heap stops using the heap-helpers logic
which sadly is not quite as generic as I was hoping it to be, so
this patch adds heap specific implementations of the dma_buf_ops
function handlers.

Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: Ørjan Eide <orjan.eide@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ezequiel Garcia <ezequiel@collabora.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: James Jones <jajones@nvidia.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: NBrian Starkey <brian.starkey@arm.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201121235002.69945-2-john.stultz@linaro.org

Instead of moving meson_dw_hdmi_init() around which breaks existing
platform, let's enable the clock meson_dw_hdmi_init() depends on.
This means we don't have to worry about this clock being enabled or
not, depending on the boot-loader features.

Fixes: b33340e3 ("drm/meson: dw-hdmi: Ensure that clocks are enabled before touching the TOP registers")
Reported-by: N"kernelci.org bot" <bot@kernelci.org>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Tested-by: NGuillaume Tucker <guillaume.tucker@collabora.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
[narmstrong: changed reported by to kernelci.org bot]
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120094205.525228-3-maz@kernel.org

The HDMI driver request clocks early, but never disable them, leaving
the clocks on even when the driver is removed.

Fix it by slightly refactoring the clock code, and register a devm
action that will eventually disable/unprepare the enabled clocks.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120094205.525228-2-maz@kernel.org

The init sequence consist of a number of unknown settings
for the display controller. This patch achieves two things:

- Fix an error that must have happened when the driver was
  converted from the backlight subsystem: the 0xb8
  configuration command was lost and added as a tail to
  the previous command.

- Update some minor settings in some bytes here and there
  according to changes in the Samsung GT-I9070 and
  Samsung GT-S7710 code dumps. Since two other devices use
  these settings they probably reflect trimmings later
  found to be better for the display rather than
  customizations for these devices.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NGuido Günther <agx@sigxcpu.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117175621.870085-3-linus.walleij@linaro.org

A later version of the s6e63m0 driver in the Samsung
GT-I9070 vendor tree provides 28 different backlight
levels making use of elaborate control of the ACL
and ELVSS regulator. Implement this more fine-grained
backlight control.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NGuido Günther <agx@sigxcpu.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117175621.870085-2-linus.walleij@linaro.org

Fix up the format of the manufacturer command set table
to be TAB-indented and lowercase. Add the MCS_TEMP_SWIRE
command that we will make use of.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NGuido Günther <agx@sigxcpu.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117175621.870085-1-linus.walleij@linaro.org

The current atomic helpers have either their object state being passed as
an argument or the full atomic state.

The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.

Now that the CRTCs have been converted, let's move forward with the
connectors to provide a consistent interface.

The conversion was done using the coccinelle script below, and built tested
on all the drivers.

@@
identifier connector, connector_state;
@@

 struct drm_connector_helper_funcs {
	...
	struct drm_encoder* (*atomic_best_encoder)(struct drm_connector *connector,
-						   struct drm_connector_state *connector_state);
+						   struct drm_atomic_state *state);
	...
}

@@
identifier connector, connector_state;
@@

 struct drm_connector_helper_funcs {
	...
	void (*atomic_commit)(struct drm_connector *connector,
-			      struct drm_connector_state *connector_state);
+			      struct drm_atomic_state *state);
	...
}

@@
struct drm_connector_helper_funcs *FUNCS;
identifier state;
identifier connector, connector_state;
identifier f;
@@

 f(..., struct drm_atomic_state *state, ...)
 {
	<+...
-	FUNCS->atomic_commit(connector, connector_state);
+	FUNCS->atomic_commit(connector, state);
	...+>
 }

@@
struct drm_connector_helper_funcs *FUNCS;
identifier state;
identifier connector, connector_state;
identifier var, f;
@@

 f(struct drm_atomic_state *state, ...)
 {
	<+...
-	var = FUNCS->atomic_best_encoder(connector, connector_state);
+	var = FUNCS->atomic_best_encoder(connector, state);
	...+>
 }

@ connector_atomic_func @
identifier helpers;
identifier func;
@@

(
static struct drm_connector_helper_funcs helpers = {
	...,
	.atomic_best_encoder = func,
	...,
};
|
static struct drm_connector_helper_funcs helpers = {
	...,
	.atomic_commit = func,
	...,
};
)

@@
identifier connector_atomic_func.func;
identifier connector;
symbol state;
@@

 func(struct drm_connector *connector,
-      struct drm_connector_state *state
+      struct drm_connector_state *connector_state
      )
 {
	...
-	state
+	connector_state
 	...
 }

@ ignores_state @
identifier connector_atomic_func.func;
identifier connector, connector_state;
@@

 func(struct drm_connector *connector,
      struct drm_connector_state *connector_state)
{
	... when != connector_state
}

@ adds_state depends on connector_atomic_func && !ignores_state @
identifier connector_atomic_func.func;
identifier connector, connector_state;
@@

 func(struct drm_connector *connector, struct drm_connector_state *connector_state)
 {
+	struct drm_connector_state *connector_state = drm_atomic_get_new_connector_state(state, connector);
	...
 }

@ depends on connector_atomic_func @
identifier connector_atomic_func.func;
identifier connector_state;
identifier connector;
@@

 func(struct drm_connector *connector,
-     struct drm_connector_state *connector_state
+     struct drm_atomic_state *state
	   )
 { ... }

@ include depends on adds_state @
@@

 #include <drm/drm_atomic.h>

@ no_include depends on !include && adds_state @
@@

+ #include <drm/drm_atomic.h>
  #include <drm/...>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Reviewed-by: NRodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201118094758.506730-1-maxime@cerno.tech

This allows `struct drm_mode_modeinfo` references to be linkified.

Some descriptions are borrowed from struct drm_display_mode.
Signed-off-by: NSimon Ser <contact@emersion.fr>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/BBtyuxgs3DvcrMtbRyb7KBEWUviGy1dtWO61eB4@cp3-web-016.plabs.ch

Document how to perform a GETCONNECTOR ioctl. Document the various
struct fields. Also document how to perform a forced probe, and when
should user-space do it.
Signed-off-by: NSimon Ser <contact@emersion.fr>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4NxrTtynzPiPX4SOCzxmA1sRB8fVLfeiabVpi5j3Y@cp7-web-041.plabs.ch

To be clearer about our intentions to associate sequence numbers
and fence IDs, let's rename these variables.
Signed-off-by: NGurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: NAnthoine Bourgeois <anthoine.bourgeois@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201119010809.528-5-gurchetansingh@chromium.orgSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Currently, the fence ID, which can be used to identify a
virtgpu fence, is the same as the fence sequence number.

Let's use the fence_id name to clearly signal this.
Signed-off-by: NGurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: NAnthoine Bourgeois <anthoine.bourgeois@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201119010809.528-4-gurchetansingh@chromium.orgSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

This provides a description of how the kernel driver uses the
shmid to determine capabilities.
Signed-off-by: NAnthoine Bourgeois <anthoine.bourgeois@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201119010809.528-3-gurchetansingh@chromium.orgSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Easier to find where declarations are implemented.
Signed-off-by: NAnthoine Bourgeois <anthoine.bourgeois@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201119010809.528-2-gurchetansingh@chromium.orgSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

For coherency, all ioctls are suffixed
Signed-off-by: NAnthoine Bourgeois <anthoine.bourgeois@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201119010809.528-1-gurchetansingh@chromium.orgSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

- Remove duplicate doc-comments for struct members
- Add missing @member markers for in-line member comments
Signed-off-by: NSimon Ser <contact@emersion.fr>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/grZIqIAOSUM7eNL0PurBsaWoILFwN2hEKd40Ylgzg@cp7-web-041.plabs.ch

When we have mixed DMA32 and non DMA32 device in one system
it could otherwise happen that the DMA32 device gets pages
it can't work with.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/401317/

Add the new vma_set_file() function to allow changing
vma->vm_file with the necessary refcount dance.

v2: add more users of this.
v3: add missing EXPORT_SYMBOL, rebase on mmap cleanup,
    add comments why we drop the reference on two occasions.
v4: make it clear that changing an anonymous vma is illegal.
v5: move vma_set_file to mm/util.c
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2)
Reviewed-by: NJason Gunthorpe <jgg@nvidia.com>
Acked-by: NAndrew Morton <akpm@linux-foundation.org>
Link: https://patchwork.freedesktop.org/patch/399360/

Patch "495c10cc CHROMIUM: dma-buf: restore args..."
adds a workaround for a bug in mmap_region.

As the comment states ->mmap() callback can change
vma->vm_file and so we might call fput() on the wrong file.

Revert the workaround and proper fix this in mmap_region.

v2: drop the extra if in dma_buf_mmap as well
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NJason Gunthorpe <jgg@nvidia.com>
Acked-by: NAndrew Morton <akpm@linux-foundation.org>
Link: https://patchwork.freedesktop.org/patch/399359/

It's probably full of bugs ready for exploiting by userspace. And
there's not going to be any userspace for this without any of the drm
legacy drivers enabled too. So just couple it together.

Note that the frontend is only the /dev/agp ioctl interface, which per
Adam is only used by the i810 userspace drivers. All other drivers go
through the drm bufmap agp handling abstraction apparently.

v2: Augment commit message a bit from m-l feedback.
Acked-by: NAdam Jackson <ajax@redhat.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Acked-by: NThomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Adam Jackson <ajax@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117214029.591896-1-daniel.vetter@ffwll.ch

Fix check_patch.pl warning:
ERROR: do not use assignment in if condition
+                       if ((HALCYON_HEADER2 == (cmd = *buf)) &&

ERROR: do not use assignment in if condition
+                       if (HALCYON_HEADER2 == (cmd = *buf))
Signed-off-by: NBernard Zhao <bernard@vivo.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201118114021.105502-1-bernard@vivo.com

Fix a missing prototype warning for function
amdgpu_info_ioctl(),

drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c:482:5: warning: no previous prototype for 'amdgpu_info_ioctl' [-Wmissing-prototypes]
Signed-off-by: NLuben Tuikov <luben.tuikov@amd.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NSouptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110051548.685725-1-luben.tuikov@amd.com

Reorder the code to fix checking if blitting is available.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/401019/

I didnt' format the thing correctly :-(

Fixes: 39aead83 ("fbcon: Disable accelerated scrolling")
Reviewed-by: NSimon Ser <contact@emersion.fr>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201118073637.597206-1-daniel.vetter@ffwll.ch

In the macro for_each_oldnew_crtc_in_state() 'crtc_state' is provided
as a container for state->crtcs[i].new_state, but is not utilised in
some use-cases, so we fake-use it instead.

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/imx/ipuv3-plane.c: In function ‘ipu_planes_assign_pre’:
 drivers/gpu/drm/imx/ipuv3-plane.c:746:42: warning: variable ‘crtc_state’ set but not used [-Wunused-but-set-variable]

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-43-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/vc4/vc4_debugfs.c:25: warning: Function parameter or member 'minor' not described in 'vc4_debugfs_init'
 drivers/gpu/drm/vc4/vc4_debugfs.c:62: warning: Function parameter or member 'dev' not described in 'vc4_debugfs_add_file'
 drivers/gpu/drm/vc4/vc4_debugfs.c:62: warning: Function parameter or member 'name' not described in 'vc4_debugfs_add_file'
 drivers/gpu/drm/vc4/vc4_debugfs.c:62: warning: Function parameter or member 'show' not described in 'vc4_debugfs_add_file'
 drivers/gpu/drm/vc4/vc4_debugfs.c:62: warning: Function parameter or member 'data' not described in 'vc4_debugfs_add_file'

Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-41-lee.jones@linaro.org