Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 12 9月, 2019 1 次提交
    • E
      fork: block invalid exit signals with clone3() · a0eb9abd
      由 Eugene Syromiatnikov 提交于 
      Previously, higher 32 bits of exit_signal fields were lost when copied
to the kernel args structure (that uses int as a type for the respective
field). Moreover, as Oleg has noted, exit_signal is used unchecked, so
it has to be checked for sanity before use; for the legacy syscalls,
applying CSIGNAL mask guarantees that it is at least non-negative;
however, there's no such thing is done in clone3() code path, and that
can break at least thread_group_leader.

This commit adds a check to copy_clone_args_from_user() to verify that
the exit signal is limited by CSIGNAL as with legacy clone() and that
the signal is valid. With this we don't get the legacy clone behavior
were an invalid signal could be handed down and would only be detected
and ignored in do_notify_parent(). Users of clone3() will now get a
proper error when they pass an invalid exit signal. Note, that this is
not user-visible behavior since no kernel with clone3() has been
released yet.

The following program will cause a splat on a non-fixed clone3() version
and will fail correctly on a fixed version:

 #define _GNU_SOURCE
 #include <linux/sched.h>
 #include <linux/types.h>
 #include <sched.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <sys/syscall.h>
 #include <sys/wait.h>
 #include <unistd.h>

 int main(int argc, char *argv[])
 {
        pid_t pid = -1;
        struct clone_args args = {0};
        args.exit_signal = -1;

        pid = syscall(__NR_clone3, &args, sizeof(struct clone_args));
        if (pid < 0)
                exit(EXIT_FAILURE);

        if (pid == 0)
                exit(EXIT_SUCCESS);

        wait(NULL);

        exit(EXIT_SUCCESS);
 }

Fixes: 7f192e3c ("fork: add clone3")
Reported-by: NOleg Nesterov <oleg@redhat.com>
Suggested-by: NOleg Nesterov <oleg@redhat.com>
Suggested-by: NDmitry V. Levin <ldv@altlinux.org>
Signed-off-by: NEugene Syromiatnikov <esyr@redhat.com>
Link: https://lore.kernel.org/r/4b38fa4ce420b119a4c6345f42fe3cec2de9b0b5.1568223594.git.esyr@redhat.com
[christian.brauner@ubuntu.com: simplify check and rework commit message]
Signed-off-by: NChristian Brauner <christian.brauner@ubuntu.com>
      a0eb9abd
  3. 09 9月, 2019 3 次提交
  5. 08 9月, 2019 5 次提交
  7. 07 9月, 2019 8 次提交
  9. 06 9月, 2019 14 次提交
  11. 05 9月, 2019 7 次提交
  13. 04 9月, 2019 2 次提交
    • A
      Merge tag 'renesas-fixes-for-v5.3' of... · d9a2b63c
      由 Arnd Bergmann 提交于 
      Merge tag 'renesas-fixes-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/fixes

Renesas ARM Based SoC Fixes for v5.3

* R-Car D3 (r8a77995) based Draak Board
  - Correct backlight regulator name in device tree

* tag 'renesas-fixes-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: renesas: r8a77995: draak: Fix backlight regulator name
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
      d9a2b63c
    • G
      powerpc/tm: Fix restoring FP/VMX facility incorrectly on interrupts · a8318c13
      由 Gustavo Romero 提交于 
      When in userspace and MSR FP=0 the hardware FP state is unrelated to
the current process. This is extended for transactions where if tbegin
is run with FP=0, the hardware checkpoint FP state will also be
unrelated to the current process. Due to this, we need to ensure this
hardware checkpoint is updated with the correct state before we enable
FP for this process.

Unfortunately we get this wrong when returning to a process from a
hardware interrupt. A process that starts a transaction with FP=0 can
take an interrupt. When the kernel returns back to that process, we
change to FP=1 but with hardware checkpoint FP state not updated. If
this transaction is then rolled back, the FP registers now contain the
wrong state.

The process looks like this:
   Userspace:                      Kernel

               Start userspace
                with MSR FP=0 TM=1
                  < -----
   ...
   tbegin
   bne
               Hardware interrupt
                   ---- >
                                    <do_IRQ...>
                                    ....
                                    ret_from_except
                                      restore_math()
				        /* sees FP=0 */
                                        restore_fp()
                                          tm_active_with_fp()
					    /* sees FP=1 (Incorrect) */
                                          load_fp_state()
                                        FP = 0 -> 1
                  < -----
               Return to userspace
                 with MSR TM=1 FP=1
                 with junk in the FP TM checkpoint
   TM rollback
   reads FP junk

When returning from the hardware exception, tm_active_with_fp() is
incorrectly making restore_fp() call load_fp_state() which is setting
FP=1.

The fix is to remove tm_active_with_fp().

tm_active_with_fp() is attempting to handle the case where FP state
has been changed inside a transaction. In this case the checkpointed
and transactional FP state is different and hence we must restore the
FP state (ie. we can't do lazy FP restore inside a transaction that's
used FP). It's safe to remove tm_active_with_fp() as this case is
handled by restore_tm_state(). restore_tm_state() detects if FP has
been using inside a transaction and will set load_fp and call
restore_math() to ensure the FP state (checkpoint and transaction) is
restored.

This is a data integrity problem for the current process as the FP
registers are corrupted. It's also a security problem as the FP
registers from one process may be leaked to another.

Similarly for VMX.

A simple testcase to replicate this will be posted to
tools/testing/selftests/powerpc/tm/tm-poison.c

This fixes CVE-2019-15031.

Fixes: a7771176 ("powerpc: Don't enable FP/Altivec if not checkpointed")
Cc: stable@vger.kernel.org # 4.15+
Signed-off-by: NGustavo Romero <gromero@linux.ibm.com>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190904045529.23002-2-gromero@linux.vnet.ibm.com
      a8318c13