- 03 6月, 2013 1 次提交
-
-
由 Clemens Ladisch 提交于
Commit 927c9423 (ALSA: usb-audio: add Edirol UM-3G support) used a wrong quirk type, which would make the driver refuse to attach with the error message "MIDIStreaming interface descriptor not found". Cc: <stable@vger.kernel.org> # 3.3 and later Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 31 5月, 2013 3 次提交
-
-
由 David Henningsson 提交于
This quirk is required for the headset mic to work on these two machines. BugLink: https://bugs.launchpad.net/bugs/1186170Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ebben Aries 提交于
Add a model/fixup string "lenovo-dock", for Thinkpad T431s, to allow sound in docking station. Tested on Lenovo T431s with ThinkPad Mini Dock Plus Series 3 Signed-off-by: NEbben Aries <earies@dscp.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wei Yongjun 提交于
Fix to return a negative error code in the pci_set_dma_mask() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 5月, 2013 4 次提交
-
-
由 Nicolas Schichan 提交于
The default register value for MASTERA_VOL is 0x00, the same as MASTERB_VOL. Signed-off-by: NNicolas Schichan <nschichan@freebox.fr> Acked-by: NBrian Austin <brian.austin@cirrus.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
-
由 Vinod Koul 提交于
The array 'drc_cfg' of size 3 may use index value -22 (EINVAL) The array 'retune_mobile_cfg' of size 3 may use index value -22 (EINVAL) Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
During recent refactoring the code to report removal when MICDET reports an absent microphone was removed, causing problems for systems which rely solely on the MICDET for this functionality. Restore it. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Vinod Koul 提交于
Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 25 5月, 2013 1 次提交
-
-
由 Charles Keepax 提交于
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
-
- 23 5月, 2013 4 次提交
-
-
由 Torsten Schenk 提交于
Check only the uppermost 16 bits instead of the whole 32 bits of the version information. Do this because all firmware version tested with this version information worked correctly and the strict check causes problems for several users. Signed-off-by: NTorsten Schenk <torsten.schenk@zoho.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Nicolas Schichan 提交于
The mask should define the bits to change in the register, not the bits to preserve. This fixes the inadvertent changes of the "Headphone Analog Gain" value during mute/unmute. Signed-off-by: NNicolas Schichan <nschichan@freebox.fr> Acked-by: NBrian Austin <brian.austin@cirrus.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Nicolas Schichan 提交于
Signed-off-by: NNicolas Schichan <nschichan@freebox.fr> Acked-by: NBrian Austin <brian.austin@cirrus.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Nicolas Schichan 提交于
Signed-off-by: NNicolas Schichan <nschichan@freebox.fr> Acked-by: NBrian Austin <brian.austin@cirrus.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 22 5月, 2013 1 次提交
-
-
由 Daniel Mack 提交于
McASP serial audio engine needs different rotation values on TX and RX channels. Commit dde109fb ("ASoC: McASP: Fix data rotation for playback. Enables 24bit audio playback") changed the calculation to fix the playback format, but broke the capture stream by doing it for both TXFMT and RXFMT. Signed-off-by: NDaniel Mack <zonque@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org [3.9 only]
-
- 21 5月, 2013 1 次提交
-
-
由 Mark Brown 提交于
Add callback to initialise the speaker in the core following the recent changes to handling of integration with the thermal interrupts. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 20 5月, 2013 2 次提交
-
-
由 Charles Keepax 提交于
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Andrew Bresticker 提交于
request_threaded_irq() rejects calls which both do not specify a handler (indicating that the primary IRQ handler should be used) and do not set IRQF_ONESHOT because the combination is unsafe with level-triggered interrupts. It is safe in this case, though, since max98090 IRQs are edge-triggered and the interrupts aren't ACK'ed until the codec's IRQ status register is read. Because of this, an IRQF_ONESHOT interrupt doesn't really make a difference, but request one anyway in order to make request_threaded_irq() happy. Signed-off-by: NAndrew Bresticker <abrestic@chromium.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 18 5月, 2013 2 次提交
-
-
由 Wolfram Sang 提交于
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-
由 Wolfram Sang 提交于
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-
- 17 5月, 2013 1 次提交
-
-
由 Torstein Hegge 提交于
freqshift is only set for the data endpoint and syncmaxsize is only set for the sync endpoint. This results in a syncmaxsize of zero used in the proc output feedback format calculation, which gives a feedback format incorrectly shown as 8.16 for UAC2 devices. As neither the data nor the sync endpoint gives all the relevant content, output the two combined. Also remove the sync_endpoint "packet size" which is always zero and the sync_endpoint "momentary freq" which is constant. Tested with UAC2 async and UAC1 adaptive, not tested with UAC1 async. Reported-by: NB. Zhang <bb.zhang@free.fr> Signed-off-by: NTorstein Hegge <hegge@resisty.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 5月, 2013 3 次提交
-
-
由 David Henningsson 提交于
BugLink: https://bugs.launchpad.net/bugs/1180351Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Michael Ellerman 提交于
Either one or a combination of commits 81e5d864 "Register i2c devices from device-tree" and 3a3dd018 "Improve detection of devices from device-tree" broke sound on PowerBook6,5 machines. Fix it by adding an entry to the new driver to match PowerBook6,5 machines. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
When an inactive path is powered down with spec->power_down_unused flag, we should check the activity of each widget in the path whether it's still referred from any active path. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 5月, 2013 1 次提交
-
-
由 Paul Bolle 提交于
Commit d4702b18 ("sound: Fix make allmodconfig on MIPS") added a (negative) dependency on ISA_DMA_SUPPORT_BROKEN. Since that Kconfig symbol doesn't exist, this dependency will always evaluate to true. Apparently GENERIC_ISA_DMA_SUPPORT_BROKEN was meant to be used here. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 5月, 2013 1 次提交
-
-
由 Takashi Iwai 提交于
This reverts commit affdb62b. The commit introduced a regression with AD codecs where the stream is always clean up. Since the patch is just a minor optimization and reverting the commit fixes the issue, let's just revert it. Reported-and-tested-by: NMichael Burian <michael.burian@sbg.at> Cc: <stable@vger.kernel.org> [v3.9+] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 5月, 2013 1 次提交
-
-
由 Axel Lin 提交于
When set dmic_samplephase and dmic_clk_rate bits for dmic_cfg, current code checks pdata->dmic_data_sel which is wrong. Signed-off-by: NAxel Lin <axel.lin@ingics.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
-
- 08 5月, 2013 3 次提交
-
-
由 Fabio Baltieri 提交于
AD slots definitions for ab8500 codec were erroneously swapped between even and odd channels. Fix this by swapping the definitions to be coherent with the channel number. Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org> Acked-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Takashi Iwai 提交于
This is a revised patch based on Mengdong Lin's fix patch, which is a supplement to a previous patch [1611a9c9: ALSA: hda - Add fixup for Haswell to enable all pin and convertor widgets]. Some Haswell BIOS will disable the 2nd and 3rd pin/covertor widgets when the HD-A controller changes state from D3 to D0. So when the controller resumes after a system or runtime suspend, these widgets are disabled and programming these widgets to D0 will cause H/W error and codec will not respond. In addition, we found out that some BIOS disables the pins at S3 although it shows up at boot. This confuses the driver utterly, and the hardware falls into the fatal communication error like the above. So in this patch, we apply intel_haswell_enable_all_pins() not only as a fixup to a certain device (with 8086:2010) but to all Haswell machines. The codec driver basically assumes that all pins are exposed, so it's anyway better to see them from the beginning. Even if all pins and converters are shown by this call, there should be no regression in practice: the pin default configurations are still kept, thus the disabled pins are handled as disabled by the driver properly. Signed-off-by: NMengdong Lin <mengdong.lin@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kent Overstreet 提交于
Faster kernel compiles by way of fewer unnecessary includes. [akpm@linux-foundation.org: fix fallout] [akpm@linux-foundation.org: fix build] Signed-off-by: NKent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 5月, 2013 2 次提交
-
-
由 Wei Yongjun 提交于
Fix to return -ENOMEM in the memory malloc of 'out' and 'img_swap' error handling case instead of 0, as done elsewhere in this function. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Wang YanQing 提交于
The interrupt handler azx_interrupt will call azx_update_rirb, which may call snd_hda_queue_unsol_event, snd_hda_queue_unsol_event will dereference chip->bus pointer. The problem is we alloc chip->bus in azx_codec_create which will be called after we enable IRQ and enable unsolicited event in azx_probe. This will cause Oops due dereference NULL pointer. I meet it, good luck:) [Rearranged the NULL check before the tracepoint and added another NULL check of bus->workq -- tiwai] Signed-off-by: NWang YanQing <udknight@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 5月, 2013 2 次提交
-
-
由 Sachin Kamat 提交于
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Cc: Vivien Chappelier <vivien.chappelier@linux-mips.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Sachin Kamat 提交于
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.fanken.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 5月, 2013 1 次提交
-
-
由 Takashi Iwai 提交于
The older Conexant codecs have up to two EAPDs and these are supposed to be rather statically turned on. The new generic parser code assumes the dynamic on/off per path usage, thus it resulted in the silent output on some machines. This patch fixes the problem by simply assuming the static EAPD on for such old Conexant codecs as we did until 3.8 kernel. Reported-and-tested-by: NChristopher K. <c.krooss@gmail.com> Cc: <stable@vger.kernel.org> [v3.9] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 5月, 2013 4 次提交
-
-
由 Takashi Iwai 提交于
The compile of soundcard.c is broken on MIPS when allmodconfig is used because of the missing MAX_DMA_CHANNELS definition. As a simple workaround, just add a Kconfig dependency. Reported-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Mike Travis 提交于
The audio driver mistakenly allows 64 bit addresses to be created for the audio driver on Nvidia GPUs. Unfortunately, the hardware normally only supports up to 40 bits of DMA. This can cause system panics as well as misdirected data when the address is > 40 bits as the upper part the address is truncated. Signed-off-by: NMike Travis <travis@sgi.com> Reviewed-by: NMike Habeck <habeck@sgi.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Sachin Kamat 提交于
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NHans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Marek Belisko 提交于
According documentation bit ACLKRPOL is set to 0 (receiver samples data on falling edge) and when set to 1 (receiver samples data on rising edge). I2S data are always sampled on falling edge and valid during rising edge of bit clock. So in case of capture data transmitter sample data on falling edge and macsp must read then on rising edge. Signed-off-by: NMarek Belisko <marek.belisko@streamunlimited.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 02 5月, 2013 2 次提交
-
-
由 David Howells 提交于
Supply a function (proc_remove()) to remove a proc entry (and any subtree rooted there) by proc_dir_entry pointer rather than by name and (optionally) root dir entry pointer. This allows us to eliminate all remaining pde->name accesses outside of procfs. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NGrant Likely <grant.likely@linaro.or> cc: linux-acpi@vger.kernel.org cc: openipmi-developer@lists.sourceforge.net cc: devicetree-discuss@lists.ozlabs.org cc: linux-pci@vger.kernel.org cc: netdev@vger.kernel.org cc: netfilter-devel@vger.kernel.org cc: alsa-devel@alsa-project.org Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 David Howells 提交于
Supply accessor functions to set attributes in proc_dir_entry structs. The following are supplied: proc_set_size() and proc_set_user(). Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> cc: linuxppc-dev@lists.ozlabs.org cc: linux-media@vger.kernel.org cc: netdev@vger.kernel.org cc: linux-wireless@vger.kernel.org cc: linux-pci@vger.kernel.org cc: netfilter-devel@vger.kernel.org cc: alsa-devel@alsa-project.org Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-