- 29 9月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
Ensure that we do return errors from nfs4_proc_layoutget() and that we don't mark the layout as having failed if the error was due to a signal or resource problem on the client side. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 03 8月, 2012 1 次提交
-
-
由 Idan Kedar 提交于
we have encountered a bug whereby reading a lot of files (copying fedora's /bin) from a pNFS mount and hitting Ctrl+C in the middle caused a general protection fault in xdr_shrink_bufhead. this function is called when decoding the response from LAYOUTGET. the decoding is done by a worker thread, and the caller of LAYOUTGET waits for the worker thread to complete. hitting Ctrl+C caused the synchronous wait to end and the next thing the caller does is to free the pages, so when the worker thread calls xdr_shrink_bufhead, the pages are gone. therefore, the cleanup of these pages has been moved to nfs4_layoutget_release. Signed-off-by: NIdan Kedar <idank@tonian.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Cc: stable@vger.kernel.org Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 31 7月, 2012 1 次提交
-
-
由 Bryan Schumaker 提交于
This patch exports symbols needed by the v4 module. In addition, I also switch over to using IS_ENABLED() to check if CONFIG_NFS_V4 or CONFIG_NFS_V4_MODULE are set. The module (nfs4.ko) will be created in the same directory as nfs.ko and will be automatically loaded the first time you try to mount over NFS v4. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 17 7月, 2012 2 次提交
-
-
由 Andy Adamson 提交于
mark_matching_lsegs_invalid() resets the mds_threshold counters and can dereference the layout hdr on an initial empty plh_segs list. It returns 0 both in the case of an initial empty list and in a non-emtpy list that was cleared by calls to mark_lseg_invalid. Don't send a LAYOUTRETURN if the list was initially empty. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
When the file layout driver is fencing a DS, _pnfs_return_layout can be called mulitple times per inode due to in-flight i/o referencing lsegs on it's plh_segs list. Remember that LAYOUTRETURN has been called, and do not call it again. Allow LAYOUTRETURNs after a subsequent LAYOUTGET. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 29 6月, 2012 2 次提交
-
-
由 Bryan Schumaker 提交于
pNFS needs to select a write function based on the layout driver currently in use, so I let each NFS version decide how to best handle initializing writes. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
pNFS needs to select a read function based on the layout driver currently in use, so I let each NFS version decide how to best handle initializing reads. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 6月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
The call to try_module_get() dereferences ld_type outside the spin locks, which means that it may be pointing to garbage if a module unload was in progress. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 18 6月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
Currently there is a 'chicken and egg' issue when the DS is also the mounted MDS. The nfs_match_client() reference from nfs4_set_ds_client bumps the cl_count, the nfs_client is not freed at umount, and nfs4_deviceid_purge_client is not called to dereference the MDS usage of a deviceid which holds a reference to the DS nfs_client. The result is the umount program returns, but the nfs_client is not freed, and the cl_session hearbeat continues. The MDS (and all other nfs mounts) lose their last nfs_client reference in nfs_free_server when the last nfs_server (fsid) is umounted. The file layout DS lose their last nfs_client reference in destroy_ds when the last deviceid referencing the data server is put and destroy_ds is called. This is triggered by a call to nfs4_deviceid_purge_client which removes references to a pNFS deviceid used by an MDS mount. The fix is to track how many pnfs enabled filesystems are mounted from this server, and then to purge the device id cache once that count reaches zero. Reported-by: NJorge Mora <Jorge.Mora@netapp.com> Reported-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 25 5月, 2012 3 次提交
-
-
由 Andy Adamson 提交于
Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Keep track of the number of bytes read or written via buffered, direct, and mem-mapped i/o for use by mdsthreshold size_io hints. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 5月, 2012 3 次提交
-
-
由 Andy Adamson 提交于
The "invalid layout" class of errors is handled by destroying the layout and getting a new layout from the server. Currently, the layout must be destroyed before a new layout can be obtained. This means that all references (e.g.lsegs) to the "to be destroyed" layout header must be dropped before it can be destroyed. This in turn means waiting for all in flight RPC's using the old layout as well as draining the data server session slot table wait queue. Set the NFS_LAYOUT_INVALID flag to redirect I/O to the MDS while waiting for the old layout to be destroyed. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Let the MDS know that you are redirecting I/O from pNFS to MDS. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
This prevents the use of any layout for i/o that references the deviceid. I/O is redirected through the MDS. Redirect the unhandled failed I/O to the MDS without marking either the layout or the deviceid invalid. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 02 5月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
Move the error handling for nfs_generic_pagein() into a single function. Ditto for nfs_generic_flush(). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com>
-
- 28 4月, 2012 7 次提交
-
-
由 Trond Myklebust 提交于
If the allocation of nfs_write_header fails, the list of nfs_pages that needs to be cleaned up is still on desc->pg_list... Reported-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Acked-by: NFred Isaman <iisaman@netapp.com>
-
由 Fred Isaman 提交于
The coalesce code made assumptions that will no longer be true once non-page aligned io occurs. This introduces no change in current behavior, but allows for more general situations to come. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Factors out the code that will need to change when directio starts using these code paths. This will allow directio to use the generic pagein and flush routines Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Decouple nfs_pgio_header and nfs_write_data, and have (possibly multiple) nfs_write_datas each take a refcount on nfs_pgio_header. For the moment keeps nfs_write_header as a way to preallocate a single nfs_write_data with the nfs_pgio_header. The code doesn't need this, and would be prettier without, but given the amount of churn I am already introducing I didn't want to play with tuning new mempools. This also fixes bug in pnfs_ld_handle_write_error. In the case of desc->pg_bsize < PAGE_CACHE_SIZE, the pages list was empty, causing replay attempt to do nothing. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Decouple nfs_pgio_header and nfs_read_data, and have (possibly multiple) nfs_read_datas each take a refcount on nfs_pgio_header. For the moment keeps nfs_read_header as a way to preallocate a single nfs_read_data with the nfs_pgio_header. The code doesn't need this, and would be prettier without, but given the amount of churn I am already introducing I didn't want to play with tuning new mempools. This also fixes bug in pnfs_ld_handle_read_error. In the case of desc->pg_bsize < PAGE_CACHE_SIZE, the pages list was empty, causing replay attempt to do nothing. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
In order to avoid duplicating all the data in nfs_read_data whenever we split it up into multiple RPC calls (either due to a short read result or due to rsize < PAGE_SIZE), we split out the bits that are the same per RPC call into a separate "header" structure. The goal this patch moves towards is to have a single header refcounted by several rpc_data structures. Thus, want to always refer from rpc_data to the header, and not the other way. This patch comes close to that ideal, but the directio code currently needs some special casing, isolated in the nfs_direct_[read_write]hdr_release() functions. This will be dealt with in a future patch. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
The two functions had diverged quite a bit, with the write function being a bit more robust than the read. However, these still break badly in the desc->pg_bsize < PAGE_CACHE_SIZE case, as then there is nothing hanging on the data->pages list, and the resend ends up doing nothing. This will be fixed in a patch later in the series. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 27 4月, 2012 1 次提交
-
-
由 Andy Adamson 提交于
Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 17 3月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
Move more pnfs-isms out of the generic commit code. Bugfixes: - filelayout_scan_commit_lists doesn't need to get/put the lseg. In fact since it is run under the inode->i_lock, the lseg_put() can deadlock. - Ensure that we distinguish between what needs to be done for commit-to-data server and what needs to be done for commit-to-MDS using the new flag PG_COMMIT_TO_DS. Otherwise we may end up calling put_lseg() on a bucket for a struct nfs_page that got written through the MDS. - Fix a case where we were using list_del() on an nfs_page->wb_list instead of list_del_init(). - filelayout_initiate_commit needs to call filelayout_commit_release on error instead of the mds_ops->rpc_release(). Otherwise it won't clear the commit lock. Cleanups: - Let the files layout manage the commit lists for the pNFS case. Don't expose stuff like pnfs_choose_commit_list, and the fact that the commit buckets hold references to the layout segment in common code. - Cast out the put_lseg() calls for the struct nfs_read/write_data->lseg into the pNFS layer from whence they came. - Let the pNFS layer manage the NFS_INO_PNFS_COMMIT bit. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com>
-
- 06 3月, 2012 2 次提交
-
-
由 Trond Myklebust 提交于
Replace the union with the common struct stateid4 as defined in both RFC3530 and RFC5661. This makes it easier to access the sequence id, which will again make implementing support for parallel OPEN calls easier. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 02 3月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
The NFS4CLNT_LAYOUTRECALL tests in pnfs_layout_process and pnfs_update_layout are redundant. In the case of a bulk layout recall, we're always testing for the NFS_LAYOUT_BULK_RECALL flay anyway. In the case of a file or segment recall, the call to pnfs_set_layout_stateid() updates the layout_header 'barrier' sequence id, which triggers the test in pnfs_layoutgets_blocked() and is less race-prone than NFS4CLNT_LAYOUTRECALL anyway. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 07 2月, 2012 1 次提交
-
-
由 Weston Andros Adamson 提交于
This patch addresses printks that have some context to show that they are from fs/nfs/, but for the sake of consistency now start with NFS: Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 01 2月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 06 1月, 2012 2 次提交
-
-
由 Trond Myklebust 提交于
We have no business doing any this in the standard write release path. Get rid of it, and put it in the pNFS layer. Also, while we're at it, get rid of the completely bogus unlock/relock semantics that were present in nfs_writeback_release_full(). It is not only unnecessary, but actually dangerous to release the write lock just in order to take it again in nfs_page_async_flush(). Better just to open code the pgio operations in a pnfs helper. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Boaz Harrosh 提交于
As mandated by the standard. In case of an IO error, a pNFS objects layout driver must return it's layout. This is because all device errors are reported to the server as part of the layout return buffer. This is implemented the same way PNFS_LAYOUTRET_ON_SETATTR is done, through a bit flag on the pnfs_layoutdriver_type->flags member. The flag is set by the layout driver that wants a layout_return preformed at pnfs_ld_{write,read}_done in case of an error. (Though I have not defined a wrapper like pnfs_ld_layoutret_on_setattr because this code is never called outside of pnfs.c and pnfs IO paths) Without this patch 3.[0-2] Kernels leak memory and have an annoying WARN_ON after every IO error utilizing the pnfs-obj driver. [This patch is for 3.2 Kernel. 3.1/0 Kernels need a different patch] CC: Stable Tree <stable@kernel.org> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 11 11月, 2011 1 次提交
-
-
由 Trond Myklebust 提交于
pNFS-specific code belongs in the pnfs layer. It should not be hijacking generic NFS read or write code paths. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 01 11月, 2011 1 次提交
-
-
由 Paul Gortmaker 提交于
Some files were using the complete module.h infrastructure without actually including the header at all. Fix them up in advance so once the implicit presence is removed, we won't get failures like this: CC [M] fs/nfsd/nfssvc.o fs/nfsd/nfssvc.c: In function 'nfsd_create_serv': fs/nfsd/nfssvc.c:335: error: 'THIS_MODULE' undeclared (first use in this function) fs/nfsd/nfssvc.c:335: error: (Each undeclared identifier is reported only once fs/nfsd/nfssvc.c:335: error: for each function it appears in.) fs/nfsd/nfssvc.c: In function 'nfsd': fs/nfsd/nfssvc.c:555: error: implicit declaration of function 'module_put_and_exit' make[3]: *** [fs/nfsd/nfssvc.o] Error 1 Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 31 10月, 2011 1 次提交
-
-
由 Peng Tao 提交于
Current pnfs_layoutcommit_inode can not handle parallel layoutcommit. And as Trond suggested , there is no need for client to optimize for parallel layoutcommit. So add NFS_INO_LAYOUTCOMMITTING flag to mark inflight layoutcommit and serialize lalyoutcommit with it. Also mark_inode_dirty_sync if pnfs_layoutcommit_inode fails to issue layoutcommit. Reported-by: NVitaliy Gusev <gusev.vitaliy@nexenta.com> Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 19 10月, 2011 3 次提交
-
-
由 Peng Tao 提交于
For pnfs pagelist read failure, we need to pg_recoalesce and resend IO to mds. Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NJim Rees <rees@umich.edu> Cc: stable@kernel.org [3.0] Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Peng Tao 提交于
For pnfs pagelist write failure, we need to pg_recoalesce and resend IO to mds. Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NJim Rees <rees@umich.edu> Cc: stable@kernel.org [3.0] Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Peng Tao 提交于
file layout and block layout both use it to set mark layout io failure bit. So make it generic. Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NJim Rees <rees@umich.edu> Cc: stable@kernel.org [3.0] Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 01 8月, 2011 2 次提交
-
-
由 Andy Adamson 提交于
This gives layout driver a chance to cleanup structures they put in at encode_layoutcommit. Signed-off-by: NAndy Adamson <andros@netapp.com> [fixup layout header pointer for layoutcommit] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> [rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()] Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Benny Halevy 提交于
To allow layout driver to issue getdevicelist at mount time, and clean up at umount time. [fixup non NFS_V4_1 set_pnfs_layoutdriver definition] [pnfs: pass mntfh down the init_pnfs path] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-