Since commit a679f58d ("drm/i915: Flush pages on acquisition"), we
flush objects on acquire their pages and as such when we create an
object for the purpose of writing into it, we do not need to manually
flush.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614111053.25615-1-chris@chris-wilson.co.uk

refcount_t is our first line of defence against use-after-free, so let's
enable it for debugging.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613122842.4840-1-chris@chris-wilson.co.uk

As the fence registers only apply to regions inside the GGTT is makes
more sense that we track these as part of the i915_ggtt and not the
general mm. In the next patch, we will then pull the register locking
underneath the i915_ggtt.mutex.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073254.24048-1-chris@chris-wilson.co.uk

drivers/gpu/drm/i915//gem/i915_gem_shrinker.c:142: warning: Function parameter or member 'shrink' not described in 'i915_gem_shrink'
drivers/gpu/drm/i915//gem/i915_gem_shrinker.c:142: warning: Excess function parameter 'flags' description in 'i915_gem_shrink'

drivers/gpu/drm/i915//intel_display.c:13443: warning: Function parameter or member '_state' not described in 'intel_atomic_check'
drivers/gpu/drm/i915//intel_display.c:13443: warning: Excess function parameter 'state' description in 'intel_atomic_check'
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612151311.30295-1-chris@chris-wilson.co.uk

Remove call sites in favour of uncore mmio accessors and remove the old
macros.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-6-tvrtko.ursulin@linux.intel.com

Only a few call sites remain which have been converted to uncore mmio
accessors and so the macro can be removed.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-5-tvrtko.ursulin@linux.intel.com

Only a few call sites remain which have been converted to uncore mmio
accessors and so the macro can be removed.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-4-tvrtko.ursulin@linux.intel.com

Only a few call sites remain which have been converted to uncore mmio
accessors and so the macro can be removed.

ENGINE_POSTING_READ16 is added to replace one engine->mmio_base relative
call site.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-3-tvrtko.ursulin@linux.intel.com

Only a few call sites remain which have been converted to uncore mmio
accessors and so the macro can be removed.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-2-tvrtko.ursulin@linux.intel.com

Only a few call sites remain which have been converted to uncore mmio
accessors and so the macro can be removed.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-1-tvrtko.ursulin@linux.intel.com

With async binding, we don't want to manage a bound/unbound list as we
may end up running before we even acquire the pages. All that is
required is keeping track of shrinkable objects, so reduce it to the
minimum list.

Fixes: 6951e589 ("drm/i915: Move GEM object domain management from struct_mutex to local")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612105720.30310-1-chris@chris-wilson.co.uk

All AML parts are either KBL ULX or CFL ULX so there is no point
in keeping INTEL_SUBPLATFORM_AML around. As these are the only
CFL ULX parts (normal CFL didn't have Y SKUs) so we'll just
replace IS_AML_ULX with IS_CFL_ULX (it was already paired with
IS_KBL_ULX which accounts for the other half of the AML parts).

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605162946.19223-2-ville.syrjala@linux.intel.comReviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Add a comma after the final entry to make diffs less obnoxious if
we have to add further entries past the last one.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605162946.19223-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #irc

On non-ULT HSW the "special" WRPLL reference clock select
actually means non-SSC. Take that into account when reading
out the WRPLL state.

Also the non-SSC reference may be either 24MHz or 135MHz,
which we can read out from FUSE_STRAP3. The BDW docs actually
say: "also indicates whether the CPU and PCH are in a single
package or separate packages", so it may be that this is not
actually required and we could just assume 135 MHz (just like
the code already did). But it doesn't really hurt to read this
out as the HSW docs aren't quite so clear.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604200933.29417-5-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Only the non-SSC reference is truly supported for the LCPLL. Assert
that it is indeed selected.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604200933.29417-4-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Get rid of the pointless LC_FREQ define.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604200933.29417-3-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Give the PLL control register bits better names on HSW/BDW.

v2: Fix the copy paste fails in SPLL_REF defines (Maarten)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610133609.27288-1-ville.syrjala@linux.intel.com
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc

Our PCH refclk init code currently assumes that the PCH SSC reference
can only be used for FDI. That is not true and it can be used by
SPLL/WRPLL for eDP SSC or clock bending as well. Before we go
reconfiguring it let's make sure no PLL is currently using the PCH
SSC reference.

For some reason the hw is not particularly upset about losing
the clock if we immediately follow up with a modeset. Can't
really explain why nothing times out during the crtc disable
at least, but that's what the logs say. With fastboot the
story is quite different and we lose the entire display if
we turn off the PCH SSC reference when it's still being used.

Since we totally skip configuring the PCH SSC reference it
may not be in the proper state for FDI. Hopefully that won't
be a problem in practice.

We really should move this code to be part of the modeset seqeuence
and properly deal with the potentially conflicting requirements
imposed on PLL reference clocks. But that requires actual work.
Let's toss in a TODO for that.

v2: Pimp the commit message with the fastboot vs. not
    details

Cc: Julius B. <freedesktop@blln.gr>
Cc: Johannes Krampf <johannes.krampf@gmail.com>
Tested-by: NJohannes Krampf <johannes.krampf@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108773Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604200933.29417-1-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

We cannot allow ourselves to wait on the GPU while holding any lock as we
may need to reset the GPU. While there is not an explicit lock between
the two operations, lockdep cannot detect the dependency. So let's tell
lockdep about the wait/reset dependency with an explicit lockmap.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612085246.16374-1-chris@chris-wilson.co.uk

If we don't give it a label, it does not appear as a configuration
option.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612093111.11684-9-chris@chris-wilson.co.uk

Like was done for ICL, let's convert the voltage level lookup to use
frequency ranges rather than individual frequencies. For deciding the
voltage, the individual value doesn't really matter.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610214847.9865-1-lucas.demarchi@intel.com

Like was done for ICL, let's convert the voltage level lookup to use
frequency ranges rather than individual frequencies. For deciding the
voltage, the individual value doesn't really matter.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610214834.9789-1-lucas.demarchi@intel.com

Spec shows voltage level 0 as 307.2, 312, or lower and suggests to use
range checks. Prepare for having other frequencies in these ranges by
not comparing the exact frequency.

v2: invert checks by comparing biggest cdclk first (suggested by Ville)
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610214819.9703-1-lucas.demarchi@intel.com

These functions operate on ggtt so make them take that directly as
parameter.

At the same time move the USES_GUC conditional down to
intel_guc_reserve_ggtt_top for symmetry with
intel_guc_reserved_gtt_size.

v2:
 * Rename and move functions to be static in i915_gem_gtt.c (Michal)

v3:
 * Add comment explaining reason for reservation, add assert and fix
   error message. (Michal)

v4:
 * Fix checkpatch error.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611122350.15060-1-tvrtko.ursulin@linux.intel.com

Reduces pointer chasing and gets more to the point.

v2:
 * Tidy whitespace.
 * Tidy comment. (Michal)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611110044.7742-1-tvrtko.ursulin@linux.intel.com

Keeping the _hw_ in there does not help to distinguish it from its
only brethren i915_ggtt, so drop it.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611091238.15808-2-chris@chris-wilson.co.uk

Make the kref common to both derived structs (i915_ggtt and i915_ppgtt)
so that we can safely reference count an abstract ctx->vm address space.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611091238.15808-1-chris@chris-wilson.co.uk

The intent is to be able to update the mm.lists from inside an irqsoff
section (e.g. from a softirq rcu workqueue), ergo we need to make the
i915->mm.obj_lock irqsafe.

v2: can_discard_pages() ensures we are shrinkable
v3: Beware shadowing of 'flags'

Fixes: 3b4fa964 ("drm/i915: Track the purgeable objects on a separate eviction list")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110869Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: NMatthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610145430.17717-1-chris@chris-wilson.co.uk

Before we commit ourselves to writing commands into the
ringbuffer and submitting the request, allow signals to interrupt
acquisition of the timeline mutex. We allow ourselves to be interrupted
at any time later if we need to block for space in the ring, anyway.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610103610.19883-1-chris@chris-wilson.co.uk

The function operates on the render engine so make the input reflect it.

v2:
 * Pass engine to read_subslice_reg. (Chris)
 * Drop inline from read_subslice_reg.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610125706.26110-1-tvrtko.ursulin@linux.intel.com

Now that all their users are gone we can remove the macros and
accompanying duplicated comment.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-6-tvrtko.ursulin@linux.intel.com

More implicit dev_priv removal.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-5-tvrtko.ursulin@linux.intel.com

More implicit dev_priv removal.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-4-tvrtko.ursulin@linux.intel.com

More removal of implicit dev_priv.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-3-tvrtko.ursulin@linux.intel.com

No excuse for code located in intel_uncore.c to not use intel_uncore_
helpers.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-2-tvrtko.ursulin@linux.intel.com

On the path of removing mmio accessors with implicit dev_priv, easy first
step is to remove all such unused macros.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-1-tvrtko.ursulin@linux.intel.com

Gen10 added an additional NOA_WRITE register (high bits) and we forgot
to whitelist it for userspace.

Fixes: 95690a02 ("drm/i915/perf: enable perf support on CNL")
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NKenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190601225845.12600-1-lionel.g.landwerlin@intel.com

The code is logically about reset so it makes sense.

It also enables making i915_clear_error_registers static.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607115932.20271-1-tvrtko.ursulin@linux.intel.com

Fix the grammar.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607113118.14645-1-geert+renesas@glider.be

This no longer exists.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606122203.13416-4-jani.nikula@intel.com