- 07 12月, 2012 1 次提交
-
-
由 Padmavathi Venna 提交于
Previously, the ASoC 'platform' (PCM/DMA) object was instantiated via a platform_device. This didn't represent the hardware well, since there was no separate hardware associated with this platform_device; it was a virtual device with sole purpose to call snd_soc_register_platform(). This change removes the platform_device completely. Each Samsung DAI now registers the ASoC 'platform' itself. Machine drivers are adjusted for the new 'platform' name. Signed-off-by: NPadmavathi Venna <padma.v@samsung.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 27 6月, 2012 1 次提交
-
-
Nowadays we use generic power domain support instead of Samsung specific power domain control driver. Cc: Thomas Abraham <thomas.abraham@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 12 5月, 2012 1 次提交
-
-
由 Marek Szyprowski 提交于
Add platform device for Exynos DRM core. This device is used for creating DRM user-space device and allocating memory for display buffers. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 05 4月, 2012 1 次提交
-
-
由 KyongHo Cho 提交于
This patch removes System MMU device driver from arm/plat-s5p tree for transition to implement IOMMU driver. Although controlling System MMU in this removing driver is similar to the new IOMMU driver in the following patch, the new one is almost rewrite of this driver and there is no benefit to moving the driver file from arch/arm/ to drivers/iommu. Signed-off-by: NKyongHo Cho <pullip.cho@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 14 3月, 2012 1 次提交
-
-
由 Kukjin Kim 提交于
Actually, the base address of uart is different between EXYNOS4 and EXYNOS5 and this patch enables to support uart for EXYNOS4 and EXYNOS5 SoCs at runtime. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 10 3月, 2012 1 次提交
-
-
由 Andrzej Pietrasiewicz 提交于
This patch adds platform_device, clock, map for JPEG Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 11 2月, 2012 1 次提交
-
-
由 Kamil Debski 提交于
G2D is a 2D graphics accelerator engine present in the s5p family of Samsung SoCs. It is capable of bitblt and raster operations on images having dimensions of up to 8000x8000. Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 23 12月, 2011 2 次提交
-
-
由 Jingoo Han 提交于
Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Padmavathi Venna 提交于
SPI platform device definitions consolidated from respective machine folder to plat-samsung Signed-off-by: NPadmavathi Venna <padma.v@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 13 10月, 2011 1 次提交
-
-
由 Sylwester Nawrocki 提交于
Move the platform device definitions from boards code to plat-samsung to avoid multiple instances when multiple board support is compiled in. The boards should select at least S5P_DEV_FIMC0 to enable FIMC support. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 06 10月, 2011 1 次提交
-
-
由 Kukjin Kim 提交于
This patch merges each dev files to one devs.c file in plat-samsung directory and this help to keep it more easily to reduce plat- directories such as plat-s3c24xx and plat-s5p. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 04 10月, 2011 2 次提交
-
-
由 Tomasz Stanislawski 提交于
This patch adds all the resources for TV drivers and devices for Samsung Exynos4 and S5PV210 platforms. Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> [m.szyprowski: squashed Exynos4 and S5PV210 patches and rewrote commit message] Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Tomasz Stanislawski 提交于
This patch adds hdmiphy dedicated i2c controller definitions. Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> [m.szyprowski: renamed to i2c-hdmiphy and squashed Exynos4 and S5PV210 patches] Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 21 7月, 2011 4 次提交
-
-
由 Kamil Debski 提交于
Add support for MFC device to plat-s5p, mach-exynos4, mach-s5pv210: - clock support - memory mapping and reserving - s5p_device_mfc platform device Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jonghun Han 提交于
This patch adds platform device s5p_device_fimd0 for EXYNOS4 FIMD0. EXYNOS4 has two FIMDs(FIMD0, FIMD1). FIMD1 will be added later. Some definitions used to enable EXYNOS4 FIMD0 are added. Signed-off-by: NJonghun Han <jonghun.han@samsung.com> Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sangbeom Kim 提交于
Exynos4 and S5PC110(S5PV210) has Internal dma(idma) in AUDSS. To support idma, register idma platform device. and Exynos4 and S5PC110 has different IDMA address. TO handle different IDMA address, register idma platform data Signed-off-by: NSangbeom Kim <sbkim73@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Seungwon Jeon 提交于
This patch adds platform device for Synopsys DesignWare Multimedia Card Interface driver. Signed-off-by: NSeungwon Jeon <tgih.jun@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 06 7月, 2011 1 次提交
-
-
由 MyungJoo Ham 提交于
There has been no #ifndef - #define - #endif protection for this header file. Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 02 6月, 2011 1 次提交
-
-
由 Padmavathi Venna 提交于
Changed the SPI platform device name from S5P6450 to S5P64x0 as it is defined common for both S5p6440 and S5P6450 in dev-spi.c of S5P64x0. Signed-off-by: NPadmavathi Venna <padma.v@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 12 5月, 2011 1 次提交
-
-
由 Kukjin Kim 提交于
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 11 5月, 2011 1 次提交
-
-
由 Thomas Abraham 提交于
S3C2416, S3C2443 and S3C2450 includes a USB High-Speed Gadget controller module. This patch adds the following for supporting this controller. 1. Definition for USB High-Speed controller base address. 2. Platform device instantiation. 3. Declaration for platform data structure. 4. Functionality to setup platform data for the controller. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NSangbeom Kim <sbkim73@samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 14 4月, 2011 1 次提交
-
-
由 Joonyoung Shim 提交于
This patch adds usb ehci device definition for samsung s5p cpus. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 15 3月, 2011 1 次提交
-
-
由 Abhilash Kesavan 提交于
Adds the device definitions, platform specific initialization and clocks for SATA on ARMLEX4210. Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 12 3月, 2011 1 次提交
-
-
由 Sylwester Nawrocki 提交于
Add support for fourth FIMC platform device definition and define resources for FIMC modules on EXYNOS4 machines. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 22 2月, 2011 1 次提交
-
-
由 Kukjin Kim 提交于
This patch updates device support of EXYNOS4 according to the change of ARCH name, EXYNOS4. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 13 1月, 2011 1 次提交
-
-
由 Donguk Ryu 提交于
This patch adds support System MMU for S5PV310 and S5PC210. Signed-off-by: NDonguk Ryu <du.ryu@samsung.com> Signed-off-by: NSangbeom Kim <sbkim73@samsung.com> [kgene.kim@samsung.com: changed SYSMMU config name] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 30 12月, 2010 3 次提交
-
-
由 Sylwester Nawrocki 提交于
There may be up to two MIPI CSI slave interfaces depending on the SoC version. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Changhwan Youn 提交于
This patch adds support Power Domain for S5PV310 and S5PC210. Signed-off-by: Changhwan Youn <chaos.youn at samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Rajeshwari Shinde 提交于
Segregate I2S devices for S5P6440 and S5P6450. Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 23 11月, 2010 1 次提交
-
-
由 Jassi Brar 提交于
The ASoC uses common DMA driver for Audio devices. So it makes sense to a common audio-dma device shared across all platforms. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NKukjin Kim <kgene.kim@samsung.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 19 11月, 2010 1 次提交
-
-
由 Jassi Brar 提交于
Define platform devices for all audio devices found on S5PV310 Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 25 10月, 2010 3 次提交
-
-
由 Seungwhan Youn 提交于
This patch add S/PDIF platform device to support S/PDIF PCM audio on S5PV210. Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> Acked-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Seungwhan Youn 提交于
This patch add S/PDIF platform device to support S/PDIF PCM audio on S5PC100. Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> Acked-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kyungmin Park 提交于
S5PV310 and S5PC210 support more I2C devices than previous SoCs. Add the device support code for them. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 18 10月, 2010 2 次提交
-
-
由 Kukjin Kim 提交于
This patch updates Audio and SPI for S5P6440 and S5P6450 SoCs. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Jassi Brar <jassi.brar@samsung.com>
-
由 Kukjin Kim 提交于
This patch moves OneNAND device definitions from mach-s5pv210 to plat-s5p so that can support it commonly. Note: S5PC110 and S5PC210 have same OneNAND driver. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com>
-
- 12 8月, 2010 1 次提交
-
-
由 Liam Girdwood 提交于
This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: NTimur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: NRyan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: NTimur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 06 8月, 2010 2 次提交
-
-
由 Sylwester Nawrocki 提交于
FIMC (CAMIF) device is a camera interface embedded in S3C/S5P Samsung SOC series. It supports ITU-R BT.601/656 and MIPI-CSI2 standards, memory to memory operations, color conversion, resizing and rotation. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Joonyoung Shim 提交于
This patch adds Samsung keypad device definition for Samsung SoCs. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 05 8月, 2010 1 次提交
-
-
由 Hyuk Lee 提交于
This patch adds hsmmc3 device definition in plat-samsung. Because now S5PV210 can support 4 hsmmc such as hsmmc0, hsmmc1, hsmmc2 and hsmmc3 and that can be used in further Samsung SoCs. Signed-off-by: NHyuk Lee <hyuk1.lee@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-