- 21 10月, 2011 2 次提交
-
-
由 Jussi Kivilinna 提交于
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
This patch adds improved F-macro for 4-way parallel functions. With new F-macro for 4-way parallel functions, blowfish sees ~15% improvement in speed tests on AMD Phenom II (~5% on Intel Xeon E7330). However when used in 1-way blowfish function new macro would be ~10% slower than original, so old F-macro is kept for 1-way functions. Patch cleans up old F-macro as it is no longer needed in 4-way part. Patch also does register macro renaming to reduce stack usage. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 20 10月, 2011 1 次提交
-
-
由 Jamie Iles 提交于
The picoxcell crypto driver requires the clk API, but the platform in mainline does not currently support it. Add an explicit dependency on HAVE_CLK to avoid build breakage. Signed-off-by: NJamie Iles <jamie@jamieiles.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 22 9月, 2011 5 次提交
-
-
由 H Hartley Sweeten 提交于
Include <asm/aes.h> to pick up the declarations for crypto_aes_encrypt_x86 and crypto_aes_decrypt_x86 to quiet the sparse noise: warning: symbol 'crypto_aes_encrypt_x86' was not declared. Should it be static? warning: symbol 'crypto_aes_decrypt_x86' was not declared. Should it be static? Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: NMandeep Singh Baines <msb@chromium.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
Patch adds x86_64 assembly implementation of blowfish. Two set of assembler functions are provided. First set is regular 'one-block at time' encrypt/decrypt functions. Second is 'four-block at time' functions that gain performance increase on out-of-order CPUs. Performance of 4-way functions should be equal to 1-way functions with in-order CPUs. Summary of the tcrypt benchmarks: Blowfish assembler vs blowfish C (256bit 8kb block ECB) encrypt: 2.2x speed decrypt: 2.3x speed Blowfish assembler vs blowfish C (256bit 8kb block CBC) encrypt: 1.12x speed decrypt: 2.5x speed Blowfish assembler vs blowfish C (256bit 8kb block CTR) encrypt: 2.5x speed Full output: http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-blowfish-asm-x86_64.txt http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-blowfish-c-x86_64.txt Tests were run on: vendor_id : AuthenticAMD cpu family : 16 model : 10 model name : AMD Phenom(tm) II X6 1055T Processor stepping : 0 Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
Add ctr(blowfish) speed test to receive results for blowfish x86_64 assembly patch. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
Rename blowfish to blowfish_generic so that assembler versions of blowfish cipher can autoload. Module alias 'blowfish' is added. Also fix checkpatch warnings. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
Patch splits up the blowfish crypto routine into a common part (key setup) which will be used by blowfish crypto modules (x86_64 assembly and generic-c). Also fixes errors/warnings reported by checkpatch. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 20 8月, 2011 1 次提交
-
-
由 Herbert Xu 提交于
As cryptd is depeneded on by other algorithms such as aesni-intel, it needs to be registered before them. When everything is built as modules, this occurs naturally. However, for this to work when they are built-in, we need to use subsys_initcall in cryptd. Tested-by: NJosh Boyer <jwboyer@redhat.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 16 8月, 2011 1 次提交
-
-
由 Herbert Xu 提交于
On Tue, Aug 16, 2011 at 03:22:34PM +1000, Stephen Rothwell wrote: > > After merging the final tree, today's linux-next build (powerpc > allyesconfig) produced this warning: > > In file included from security/integrity/ima/../integrity.h:16:0, > from security/integrity/ima/ima.h:27, > from security/integrity/ima/ima_policy.c:20: > include/crypto/sha.h:86:10: warning: 'struct shash_desc' declared inside parameter list > include/crypto/sha.h:86:10: warning: its scope is only this definition or declaration, which is probably not what you want > > Introduced by commit 7c390170 ("crypto: sha1 - export sha1_update for > reuse"). I guess you need to include crypto/hash.h in crypto/sha.h. This patch fixes this by providing a declaration for struct shash_desc. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 15 8月, 2011 1 次提交
-
-
由 Thomas Meyer 提交于
Fix a get/put_cpu() imbalance in the error case when qp == NULL Signed-off-by: NThomas Meyer <thomas@m3y3r.de> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 10 8月, 2011 6 次提交
-
-
由 Mathias Krause 提交于
This is an assembler implementation of the SHA1 algorithm using the Supplemental SSE3 (SSSE3) instructions or, when available, the Advanced Vector Extensions (AVX). Testing with the tcrypt module shows the raw hash performance is up to 2.3 times faster than the C implementation, using 8k data blocks on a Core 2 Duo T5500. For the smalest data set (16 byte) it is still 25% faster. Since this implementation uses SSE/YMM registers it cannot safely be used in every situation, e.g. while an IRQ interrupts a kernel thread. The implementation falls back to the generic SHA1 variant, if using the SSE/YMM registers is not possible. With this algorithm I was able to increase the throughput of a single IPsec link from 344 Mbit/s to 464 Mbit/s on a Core 2 Quad CPU using the SSSE3 variant -- a speedup of +34.8%. Saving and restoring SSE/YMM state might make the actual throughput fluctuate when there are FPU intensive userland applications running. For example, meassuring the performance using iperf2 directly on the machine under test gives wobbling numbers because iperf2 uses the FPU for each packet to check if the reporting interval has expired (in the above test I got min/max/avg: 402/484/464 MBit/s). Using this algorithm on a IPsec gateway gives much more reasonable and stable numbers, albeit not as high as in the directly connected case. Here is the result from an RFC 2544 test run with a EXFO Packet Blazer FTB-8510: frame size sha1-generic sha1-ssse3 delta 64 byte 37.5 MBit/s 37.5 MBit/s 0.0% 128 byte 56.3 MBit/s 62.5 MBit/s +11.0% 256 byte 87.5 MBit/s 100.0 MBit/s +14.3% 512 byte 131.3 MBit/s 150.0 MBit/s +14.2% 1024 byte 162.5 MBit/s 193.8 MBit/s +19.3% 1280 byte 175.0 MBit/s 212.5 MBit/s +21.4% 1420 byte 175.0 MBit/s 218.7 MBit/s +25.0% 1518 byte 150.0 MBit/s 181.2 MBit/s +20.8% The throughput for the largest frame size is lower than for the previous size because the IP packets need to be fragmented in this case to make there way through the IPsec tunnel. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Maxim Locktyukhin <maxim.locktyukhin@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Mathias Krause 提交于
Export the update function as crypto_sha1_update() to not have the need to reimplement the same algorithm for each SHA-1 implementation. This way the generic SHA-1 implementation can be used as fallback for other implementations that fail to run under certain circumstances, like the need for an FPU context while executing in IRQ context. Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jamie Iles 提交于
The completion callback will free the request so we must remove it from the completion list before calling the callback. Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NJamie Iles <jamie@jamieiles.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jamie Iles 提交于
Allow the crypto engines to be matched from device tree bindings. Cc: devicetree-discuss@lists.ozlabs.org Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NJamie Iles <jamie@jamieiles.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jamie Iles 提交于
For using the device tree probing we use a connection ID for the clk_get() operation. Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NJamie Iles <jamie@jamieiles.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jamie Iles 提交于
Use a platform ID table and a single platform_driver. It's neater and makes the device tree addition easier and more consistent. Rename the match values to be inline with what they'll be in the device tree bindings. There aren't any current in-tree users of the existing device names. Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NJamie Iles <jamie@jamieiles.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 03 8月, 2011 1 次提交
-
-
由 Jonathan Nieder 提交于
When loading aes via the module alias, a padlock module failing to load due to missing hardware is not particularly notable. With v2.6.27-rc1~1107^2~14 (crypto: padlock - Make module loading quieter when hardware isn't available, 2008-07-03), the padlock-aes module suppresses the relevant messages when the "quiet" flag is in use; but better to suppress this particular message completely, since the administrator can already distinguish such errors by the absence of a message indicating initialization failing or succeeding. This avoids occasional messages in syslog of the form padlock_aes: VIA PadLock not detected. Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 02 8月, 2011 20 次提交
-
-
由 Oleg Nesterov 提交于
exit_mm() sets ->mm == NULL then it does mmput()->exit_mmap() which frees the memory. However select_bad_process() checks ->mm != NULL before TIF_MEMDIE, so it continues to kill other tasks even if we have the oom-killed task freeing its memory. Change select_bad_process() to check ->mm after TIF_MEMDIE, but skip the tasks which have already passed exit_notify() to ensure a zombie with TIF_MEMDIE set can't block oom-killer. Alternatively we could probably clear TIF_MEMDIE after exit_mmap(). Signed-off-by: NOleg Nesterov <oleg@redhat.com> Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (23 commits) regulator: Improve WM831x DVS VSEL selection algorithm regulator: Bootstrap wm831x DVS VSEL value from ON VSEL if not already set regulator: Set up GPIO for WM831x VSEL before enabling VSEL mode regulator: Add EPEs to the MODULE_ALIAS() for wm831x-dcdc regulator: Fix WM831x DCDC DVS VSEL bootstrapping regulator: Fix WM831x regulator ID lookups for multiple WM831xs regulator: Fix argument format type errors in error prints regulator: Fix memory leak in set_machine_constraints() error paths regulator: Make core more chatty about some errors regulator: tps65910: Fix array access out of bounds bug regulator: tps65910: Add missing breaks in switch/case regulator: tps65910: Fix a memory leak in tps65910_probe error path regulator: TWL: Remove entry of RES_ID for 6030 macros ASoC: tlv320aic3x: Add correct hw registers to Line1 cross connect muxes regulator: Add basic per consumer debugfs regulator: Add rdev_crit() macro regulator: Refactor supply implementation to work as regular consumers regulator: Include the device name in the microamps_requested_ file regulator: Increase the limit on sysfs file names regulator: Properly register dummy regulator driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (60 commits) ext4: prevent memory leaks from ext4_mb_init_backend() on error path ext4: use EXT4_BAD_INO for buddy cache to avoid colliding with valid inode # ext4: use ext4_msg() instead of printk in mballoc ext4: use ext4_kvzalloc()/ext4_kvmalloc() for s_group_desc and s_group_info ext4: introduce ext4_kvmalloc(), ext4_kzalloc(), and ext4_kvfree() ext4: use the correct error exit path in ext4_init_inode_table() ext4: add missing kfree() on error return path in add_new_gdb() ext4: change umode_t in tracepoint headers to be an explicit __u16 ext4: fix races in ext4_sync_parent() ext4: Fix overflow caused by missing cast in ext4_fallocate() ext4: add action of moving index in ext4_ext_rm_idx for Punch Hole ext4: simplify parameters of reserve_backup_gdb() ext4: simplify parameters of add_new_gdb() ext4: remove lock_buffer in bclean() and setup_new_group_blocks() ext4: simplify journal handling in setup_new_group_blocks() ext4: let setup_new_group_blocks() set multiple bits at a time ext4: fix a typo in ext4_group_extend() ext4: let ext4_group_add_blocks() handle 0 blocks quickly ext4: let ext4_group_add_blocks() return an error code ext4: rename ext4_add_groupblocks() to ext4_group_add_blocks() ... Fix up conflict in fs/ext4/inode.c: commit aacfc19c ("fs: simplify the blockdev_direct_IO prototype") had changed the ext4_ind_direct_IO() function for the new simplified calling convention, while commit dae1e52c ("ext4: move ext4_ind_* functions from inode.c to indirect.c") moved the function to another file.
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: xfs: Fix build breakage in xfs_iops.c when CONFIG_FS_POSIX_ACL is not set VFS: Reorganise shrink_dcache_for_umount_subtree() after demise of dcache_lock VFS: Remove dentry->d_lock locking from shrink_dcache_for_umount_subtree() VFS: Remove detached-dentry counter from shrink_dcache_for_umount_subtree() switch posix_acl_chmod() to umode_t switch posix_acl_from_mode() to umode_t switch posix_acl_equiv_mode() to umode_t * switch posix_acl_create() to umode_t * block: initialise bd_super in bdget() vfs: avoid call to inode_lru_list_del() if possible vfs: avoid taking inode_hash_lock on pipes and sockets vfs: conditionally call inode_wb_list_del() VFS: Fix automount for negative autofs dentries Btrfs: load the key from the dir item in readdir into a fake dentry devtmpfs: missing initialialization in never-hit case hppfs: missing include
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (37 commits) Improve slave/cyclic DMA engine documentation dmaengine: pl08x: handle the rest of enums in pl08x_width DMA: PL08x: cleanup selection of burst size DMA: PL08x: avoid recalculating cctl at each prepare DMA: PL08x: cleanup selection of buswidth DMA: PL08x: constify plchan->cd and plat->slave_channels DMA: PL08x: separately store source/destination cctl DMA: PL08x: separately store source/destination slave address DMA: PL08x: clean up LLI debugging DMA: PL08x: select LLI bus only once per LLI setup DMA: PL08x: remove unused constants ARM: mxs-dma: reset after disable channel dma: intel_mid_dma: remove redundant pci_set_drvdata calls dma: mxs-dma: fix unterminated platform_device_id table dmaengine: pl330: make platform data optional dmaengine: imx-sdma: return proper error if kzalloc fails pch_dma: Fix CTL register access issue dmaengine: mxs-dma: skip request_irq for NO_IRQ dmaengine/coh901318: fix slave submission semantics dmaengine/ste_dma40: allow memory buswidth/burst to be configured ... Fix trivial whitespace conflict in drivers/dma/mv_xor.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'gpiolib' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Hook up gpiolib support
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'pstore-efi' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: efivars: Introduce PSTORE_EFI_ATTRIBUTES efivars: Use string functions in pstore_write efivars: introduce utf16_strncmp efivars: String functions efi: Add support for using efivars as a pstore backend pstore: Allow the user to explicitly choose a backend pstore: Make "part" unsigned pstore: Add extra context for writes and erases pstore: Extend API for more flexibility in new backends
-
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kdb,kgdb: Allow arbitrary kgdb magic knock sequences kdb: Remove all references to DOING_KGDB2 kdb,kgdb: Implement switch and pass buffer from kdb -> gdb kdb: cleanup unused variables missed in the original kdb merge
-
由 Yu Jian 提交于
In ext4_mb_init(), if the s_locality_group allocation fails it will currently cause the allocations made in ext4_mb_init_backend() to be leaked. Moving the ext4_mb_init_backend() allocation after the s_locality_group allocation avoids that problem. Signed-off-by: NYu Jian <yujian@whamcloud.com> Signed-off-by: NAndreas Dilger <adilger@whamcloud.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Yu Jian 提交于
Signed-off-by: NYu Jian <yujian@whamcloud.com> Signed-off-by: NAndreas Dilger <adilger@whamcloud.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Jason Wessel 提交于
The first packet that gdb sends when the kernel is in kdb mode seems to change with every release of gdb. Instead of continuing to add many different gdb packets, change kdb to automatically look for any thing that looks like a gdb packet. Example 1 cold start test: echo g > /proc/sysrq-trigger $D#44+ Example 2 cold start test: echo g > /proc/sysrq-trigger $3#33 The second one should re-enter kdb's shell right away and is purely a test. Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Jason Wessel 提交于
The DOING_KGDB2 was originally a state variable for one of the two ways to automatically transition from kdb to kgdb. Purge all these variables and just use one single state for the transition. Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Jason Wessel 提交于
When switching from kdb mode to kgdb mode packets were getting lost depending on the size of the fifo queue of the serial chip. When gdb initially connects if it is in kdb mode it should entirely send any character buffer over to the gdbstub when switching connections. Previously kdb was zero'ing out the character buffer and this could lead to gdb failing to connect at all, or a lengthy pause could occur on the initial connect. Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Jason Wessel 提交于
The BTARGS and BTSYMARG variables do not have any function in the mainline version of kdb. Reported-by: NTim Bird <tim.bird@am.sony.com> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Liam Girdwood 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: CIFS: Cleanup demupltiplex thread exiting code CIFS: Move mid search to a separate function CIFS: Move RFC1002 check to a separate function CIFS: Simplify socket reading in demultiplex thread CIFS: Move buffer allocation to a separate function cifs: remove unneeded variable initialization in cifs_reconnect_tcon cifs: simplify refcounting for oplock breaks cifs: fix compiler warning in CIFSSMBQAllEAs cifs: fix name parsing in CIFSSMBQAllEAs cifs: don't start signing too early cifs: trivial: goto out here is unnecessary cifs: advertise the right receive buffer size to the server
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6: gpio_msm: Move Qualcomm MSM v2 gpio driver into drivers gpio_msm: Move Qualcomm v6 MSM driver into drivers msm: gpio: Fold register defs into C file msm: gpiomux: Move public API to public header msm: gpio: Remove ifdefs on gpio chip registers msm: gpio: Remove chip-specific register definitions msm: Remove chip-ifdefs for GPIO io mappings msm: gpio: Remove unsupported devices gpio: ab8500: fix MODULE_ALIAS for ab8500 of/gpio: export of_gpio_simple_xlate
-
git://gitorious.org/linux-omap-dss2/linux由 Linus Torvalds 提交于
* 'for-3.1-rc1' of git://gitorious.org/linux-omap-dss2/linux: (31 commits) OMAP: DSS2: HDMI: fix hdmi clock name HACK: OMAP: DSS2: clk hack for OMAP2/3 OMAP: DSS2: DSS: Fix context save/restore OMAP: DSS2: DISPC: Fix context save/restore OMAP: DSS2: Remove ctx loss count from dss.c OMAP: DSS2: Remove unused code from display.c OMAP: DSS2: DISPC: remove finegrained clk enables/disables OMAP: DSS2: Remove unused opt_clock_available OMAP: DSS2: Use PM runtime & HWMOD support OMAP: DSS2: Remove CONFIG_OMAP2_DSS_SLEEP_BEFORE_RESET OMAP: DSS2: Remove core_dump_clocks OMAP: DSS2: DPI: remove unneeded SYSCK enable/disable OMAP: DSS2: Use omap_pm_get_dev_context_loss_count to get ctx loss count OMAP: DSS2: rewrite use of context_loss_count OMAP: DSS2: Remove clk optimization at dss init OMAP: DSS2: Fix init and unit sequence OMAP: DSS2: Clean up probe for DSS & DSI OMAP: DSS2: Handle dpll4_m4_ck in dss_get/put_clocks OMAP: DSS2: Fix FIFO threshold and burst size for OMAP4 OMAP: DSS2: DSI: sync when disabling a display ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x由 Linus Torvalds 提交于
* 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: (39 commits) SH: static should be at beginning of declaration sh: move CLKDEV_xxx_ID macro to sh_clk.h sh: clock-shx3: add CLKDEV_ICK_ID for cleanup sh: clock-sh7786: add CLKDEV_ICK_ID for cleanup sh: clock-sh7785: add CLKDEV_ICK_ID for cleanup sh: clock-sh7757: add CLKDEV_ICK_ID for cleanup sh: clock-sh7366: add CLKDEV_ICK_ID for cleanup sh: clock-sh7343: add CLKDEV_ICK_ID for cleanup sh: clock-sh7722: add CLKDEV_ICK_ID for cleanup sh: clock-sh7724: add CLKDEV_ICK_ID for cleanup sh: clock-sh7366: modify I2C clock settings sh: clock-sh7343: modify I2C clock settings sh: clock-sh7723: modify I2C clock settings sh: clock-sh7722: modify I2C clock settings sh: clock-sh7724: modify I2C clock settings serial: sh-sci: Fix up pretty name printing for port IRQs. serial: sh-sci: Kill off per-port enable/disable callbacks. serial: sh-sci: Add missing module description/author bits. serial: sh-sci: Regtype probing doesn't need to be fatal. sh: Tidy up pre-clkdev clk_get() error handling. ...
-
- 01 8月, 2011 2 次提交
-
-
git://codeaurora.org/quic/kernel/davidb/linux-msm由 Grant Likely 提交于
Conflicts: drivers/gpio/Kconfig drivers/gpio/Makefile
-
由 Pavel Shilovsky 提交于
Reviewed-and-Tested-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-