1. Adding NETIF_F_TSO6 feature flag;
2. Adding NETIF_F_HW_CSUM. NETIF_F_IPV6_CSUM and NETIF_F_IP_CSUM are
being deprecated;
3. Cleanup the coding style of flag assignment by using macro.
Signed-off-by: NSimon Xiao <sixiao@microsoft.com>
Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Edward Cree says:

====================
IPv6 NFC

This series adds support for steering IPv6 flows using the ethtool NFC
 interface, and implements it for sfc devices.
Tested using an in-development patch to the ethtool utility.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NEdward Cree <ecree@solarflare.com>
Reviewed-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NEdward Cree <ecree@solarflare.com>
Reviewed-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
Add TOS support and some cleanup

This series adds TOS support for iWARP and also does some cleanup to make
code more readable. Patch series is created against infiniband tree and
includes patches on iw_cxgb4 and cxgb4 driver.

We have included all the maintainers of respective drivers. Kindly review
the change and let us know in case of any review comments.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This series provides support for iWARP applications to specify a TOS
value and have that map to a VLAN Priority for iw_cxgb4 iWARP connections.

In iw_cxgb4, when allocating an L2T entry, pass the skb_priority based
on the tos value in the cm_id. Also pass the correct tos value during
connection setup so the passive side gets the client's desired tos.
When sending the FLOWC work request to FW, if the egress device is
in a vlan, then use the vlan priority bits as the scheduling class.
This allows associating RDMA connections with scheduling classes to
provide traffic shaping per flow.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't log errors if a listening endpoint is going away when procesing a
PASS_ACCEPT_REQ message.  This can happen.  Change the error printk to
a PDBG() debug log entry
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rename local mm* variables to more meaningful names
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Troy Kisky says:

====================
net: fec: cleanup/fixes

V2 is a rebase on top of johannes endian-safe patch and
is only the 1st eight patches.
The testing for this series was done on a nitrogen6x.
The base commit was
commit b45efa30
    Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Testing showed no change in performance.
Testing used imx_v6_v7_defconfig + CONFIG_MICREL_PHY.
The processor was running at 996Mhz.
The following commands were used to get the transfer rates.

On an x86 ubunto system,
iperf -s -i.5 -u

On a nitrogen6x board, running via SD Card.
I first stopped some background processes

stop cron
stop upstart-file-bridge
stop upstart-socket-bridge
stop upstart-udev-bridge
stop rsyslog
stop dbus
killall dhclient
echo performance >/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor

taskset 0x2 iperf -c 192.168.0.201 -u -t60 -b500M -r

There is a branch available on github with this series, and the rest of
my fec patches, for those who would like to test it.
https://github.com:boundarydevices/linux-imx6.git branch net-next_master
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Unmap initial buffer on error.
Don't free skb until it has been unmapped.
Move cbd_bufaddr assignment closer to the mapping function.
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If you don't own it, you shouldn't write to it.
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Only the interrupt routine processes this condition.
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no need for complex macros every time we need to activate
a queue. Also, no need to call skb_get_queue_mapping when we already
know which queue it is using.
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reduces code and gains speed.
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When first initialized, cur_tx points to the 1st
entry in the queue, and dirty_tx points to the last.
At this point, fec_enet_get_free_txdesc_num will
return tx_ring_size -2. If tx_ring_size -2 entries
are now queued, then fec_enet_get_free_txdesc_num
should return 0, but it returns tx_ring_size instead.
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On an overrun, the other flags are not
valid, so don't check them.

Also, don't pass bad frames up the stack.
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Setting the FTRL register will stop the fec from
trying to use multiple receive buffers.
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No need to require the bond down while changing these settings, the change
will be reflected immediately and the 3ad mode will sort itself out.
For faster convergence set port->ntt to true in order to generate new
LACPDUs immediately.

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In certain 802.11 wireless deployments, there will be NA proxies
that use knowledge of the network to correctly answer requests.
To prevent unsolicitd advertisements on the shared medium from
being a problem, on such deployments wireless needs to drop them.

Enable this by providing an option called "drop_unsolicited_na".
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to solve a problem with 802.11, the so-called hole-196 attack,
add an option (sysctl) called "drop_unicast_in_l2_multicast" which, if
enabled, causes the stack to drop IPv6 unicast packets encapsulated in
link-layer multi- or broadcast frames. Such frames can (as an attack)
be created by any member of the same wireless network and transmitted
as valid encrypted frames since the symmetric key for broadcast frames
is shared between all stations.
Reviewed-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In certain 802.11 wireless deployments, there will be ARP proxies
that use knowledge of the network to correctly answer requests.
To prevent gratuitous ARP frames on the shared medium from being
a problem, on such deployments wireless needs to drop them.

Enable this by providing an option called "drop_gratuitous_arp".
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to solve a problem with 802.11, the so-called hole-196 attack,
add an option (sysctl) called "drop_unicast_in_l2_multicast" which, if
enabled, causes the stack to drop IPv4 unicast packets encapsulated in
link-layer multi- or broadcast frames. Such frames can (as an attack)
be created by any member of the same wireless network and transmitted
as valid encrypted frames since the symmetric key for broadcast frames
is shared between all stations.

Additionally, enabling this option provides compliance with a SHOULD
clause of RFC 1122.
Reviewed-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NSiva Reddy Kallam <siva.kallam@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Acked-by: NPrashant Sreedharan <prashant@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the checkpatch.pl error to bpf_dbg.c:

ERROR: do not initialise statics to 0
Signed-off-by: NWei Tang <tangwei@cmss.chinamobile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for filtering link dumps by master device and kind, similar
to the filtering implemented for neighbor dumps.

Each net_device that exists adds between 1196 bytes (eth) and 1556 bytes
(bridge) to the link dump. As the number of interfaces increases so does
the amount of data pushed to user space for a link list. If the user
only wants to see a list of specific devices (e.g., interfaces enslaved
to a specific bridge or a list of VRFs) most of that data is thrown away.
Passing the filters to the kernel to have only relevant data returned
makes the dump more efficient.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Craig Gallek says:

====================
Faster SO_REUSEPORT for TCP

This patch series complements an earlier series (6a5ef90c)
which added faster SO_REUSEPORT lookup for UDP sockets by
extending the feature to TCP sockets.  It uses the same
array-based data structure which allows for socket selection
after finding the first listening socket that matches an incoming
packet.  Prior to this feature, every socket in the reuseport
group needed to be found and examined before a selection could be
made.

With this series the SO_ATTACH_REUSEPORT_CBPF and
SO_ATTACH_REUSEPORT_EBPF socket options now work for TCP sockets
as well.  The test at the end of the series includes an example of
how to use these options to select a reuseport socket based on the
cpu core id handling the incoming packet.

There are several refactoring patches that precede the feature
implementation.  Only the last two patches in this series
should result in any behavioral changes.

v4
- Fix build issue when compiling IPv6 as a module.  This required
  moving the ipv6_rcv_saddr_equal into an object that is included as a
  built-in object.  I included this change in the second patch which
  adds inet6_hash since that is where ipv6_rcv_saddr_equal will
  later be called from non-module code.

v3:
- Another warning in the first patch caught by a build bot.  Return 0 in
  the no-op UDP hash function.

v2:
- In the first patched I missed a couple of hash functions that should now be
  returning int instead of void.  I missed these the first time through as it
  only generated a warning and not an error :\
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Unfortunately the existing test relied on packet payload in order to
map incoming packets to sockets.  In order to get this to work with TCP,
TCP_FASTOPEN needed to be used.

Since the fast open path is slightly different than the standard TCP path,
I created a second test which sends to reuseport group members based
on receiving cpu core id.  This will probably serve as a better
real-world example use as well.
Signed-off-by: NCraig Gallek <kraig@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change extends the fast SO_REUSEPORT socket lookup implemented
for UDP to TCP.  Listener sockets with SO_REUSEPORT and the same
receive address are additionally added to an array for faster
random access.  This means that only a single socket from the group
must be found in the listener list before any socket in the group can
be used to receive a packet.  Previously, every socket in the group
needed to be considered before handing off the incoming packet.

This feature also exposes the ability to use a BPF program when
selecting a socket from a reuseport group.
Signed-off-by: NCraig Gallek <kraig@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Both of the lines in this patch probably should have been included
in the initial implementation of this code for generic socket
support, but weren't technically necessary since only UDP sockets
were supported.

First, the sk_reuseport_cb points to a structure which assumes
each socket in the group has this pointer assigned at the same
time it's added to the array in the structure.  The sk_clone_lock
function breaks this assumption.  Since a child socket shouldn't
implicitly be in a reuseport group, the simple fix is to clear
the field in the clone.

Second, the SO_ATTACH_REUSEPORT_xBPF socket options require that
SO_REUSEPORT also be set first.  For UDP sockets, this is easily
enforced at bind-time since that process both puts the socket in
the appropriate receive hlist and updates the reuseport structures.
Since these operations can happen at two different times for TCP
sockets (bind and listen) it must be explicitly checked to enforce
the use of SO_REUSEPORT with SO_ATTACH_REUSEPORT_xBPF in the
setsockopt call.
Signed-off-by: NCraig Gallek <kraig@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a preliminary step to allow fast socket lookup of SO_REUSEPORT
groups.  Doing so with a BPF filter will require access to the
skb in question.  This change plumbs the skb (and offset to payload
data) through the call stack to the listening socket lookup
implementations where it will be used in a following patch.
Signed-off-by: NCraig Gallek <kraig@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_hdrlen is wasteful if you already have a pointer to struct tcphdr.
This splits the size calculation into a helper function that can be
used if a struct tcphdr is already available.
Signed-off-by: NCraig Gallek <kraig@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to support fast lookups for TCP sockets with SO_REUSEPORT,
the function that adds sockets to the listening hash set needs
to be able to check receive address equality.  Since this equality
check is different for IPv4 and IPv6, we will need two different
socket hashing functions.

This patch adds inet6_hash identical to the existing inet_hash function
and updates the appropriate references.  A following patch will
differentiate the two by passing different comparison functions to
__inet_hash.

Additionally, in order to use the IPv6 address equality function from
inet6_hashtables (which is compiled as a built-in object when IPv6 is
enabled) it also needs to be in a built-in object file as well.  This
moves ipv6_rcv_saddr_equal into inet_hashtables to accomplish this.
Signed-off-by: NCraig Gallek <kraig@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to support fast reuseport lookups in TCP, the hash function
defined in struct proto must be capable of returning an error code.
This patch changes the function signature of all related hash functions
to return an integer and handles or propagates this return value at
all call sites.
Signed-off-by: NCraig Gallek <kraig@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Antonio Quartulli says:

====================
Here you have a batch of patches by Sven Eckelmann that
drops our private reference counting implementation and
substitutes it with the kref objects/functions.

Then you have a patch, by Simon Wunderlich, that
makes the broadcast protection window code more generic so
that it can be re-used in the future by other components
with different requirements.

Lastly, Sven is also introducing two lockdep asserts in
functions operating on our TVLV container list, to make
sure that the proper lock is always acquired by the users.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ajit Khaparde says:

====================
be2net Patch series

Please consider applying these two patches to net-next

  Patch-1: Request RSS capability of Rx interface depending on number of
    Rx rings
  Patch-2: Interpret and log new data that's added to the port
    misconfigure async event
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

>From FW version 11.0. onwards, the PORT_MISCONFIG event generated by the FW
will carry more information about the event in the "data_word1"
and "data_word2" fields. This patch adds support in the driver to parse the
new information and log it accordingly. This patch also changes some of the
messages that are being logged currently.
Signed-off-by: NSuresh Reddy <suresh.reddy@broadcom.com>
Signed-off-by: NVenkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: NAjit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently we request RSS capability even if a single Rx ring is created.
As a result in few cases we unnecessarily consume an RSS capable interface
which is a limited resource in the chip.
This patch enables RSS on an interface only if more than one Rx ring
is created.
Signed-off-by: NAjit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <a@unstable.cc>

batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <a@unstable.cc>

batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <a@unstable.cc>