* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-module-and-param:
  Revert "module: remove the SHF_ALLOC flag on the __versions section."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (28 commits)
  powerpc: Fix oops when loading modules
  powerpc: Wire up preadv and pwritev
  powerpc/ftrace: Fix printf format warning
  powerpc/ftrace: Fix #if that should be #ifdef
  powerpc: Fix ptrace compat wrapper for FPU register access
  powerpc: Print information about mapping hw irqs to virtual irqs
  powerpc: Correct dependency of KEXEC
  powerpc: Disable VSX or current process in giveup_fpu/altivec
  powerpc/pseries: Enable relay in pseries_defconfig
  powerpc/pseries: Fix ibm,client-architecture comment
  powerpc/pseries: Scan for all events in rtasd
  powerpc/pseries: Add dispatch dispersion statistics
  powerpc: Clean up some prom printouts
  powerpc: Print progress of ibm,client-architecture method
  powerpc: Remove duplicated #include's
  powerpc/pmac: Fix internal modem IRQ on Wallstreet PowerBook
  powerpc/wdrtas: Update wdrtas_get_interval to use rtas_data_buf
  fsl-diu-fb: Pass the proper device for dma mapping routines
  powerpc/pq2fads: Update device tree for use with device-tree-aware u-boot.
  cpm_uart: Disable CPM udbg when re-initing CPM uart, even if not the console.
  ...

If ramfs mount fails, s_fs_info will be freed twice in ramfs_fill_super()
and ramfs_kill_sb(), leading to kernel oops.

Consolidate and beautify the code.
Make sure s_fs_info and s_root are in known good states.
Acked-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 9cb610d8.

This was an impressively stupid patch.  Firstly, we reset the SHF_ALLOC
flag lower down in the same function, so the patch was useless.  Even
better, find_sec() ignores sections with SHF_ALLOC not set, so
it breaks CONFIG_MODVERSIONS=y with CONFIG_MODULE_FORCE_LOAD=n, which
refuses to load the module since it can't find the __versions section.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This fixes a problem reported by Sean MacLennan where loading any
module would cause an oops.  We weren't marking the pages containing
the module text as having hardware execute permission, due to a bug
introduced in commit 8d1cf34e ("powerpc/mm: Tweak PTE bit combination
definitions"), hence trying to execute the module text caused an
exception on processors that support hardware execute permission.

This adds _PAGE_HWEXEC to the definitions of PAGE_KERNEL_X and
PAGE_KERNEL_ROX to fix this problem.
Reported-by: NSean MacLennan <smaclennan@pikatech.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

[paulus@samba.org: changed to use syscall numbers 320 and 321 since
 perf_counters is currently using 319.]
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

'tramp' is an unsigned long, so print it with %lx.

Fixes the following build warning:
arch/powerpc/kernel/ftrace.c:291: error: format ‘%x’ expects type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Commit bb725340 ("powerpc64,
ftrace: save toc only on modules for function graph"), added an
#if CONFIG_PPC64.  This changes it to #ifdef.

Fixes the following warning on 32-bit builds:
 arch/powerpc/kernel/ftrace.c:562:5: error: "CONFIG_PPC64" is not defined
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The ptrace compat wrapper mishandles access to the fpu registers.  The
PTRACE_PEEKUSR and PTRACE_POKEUSR requests miscalculate the index into
the fpr array due to the broken FPINDEX macro.  The
PPC_PTRACE_PEEKUSR_3264 request needs to use the same formula that the
native ptrace interface uses when operating on the register number (as
opposed to the 4-byte offset).  The PPC_PTRACE_POKEUSR_3264 request
didn't take TS_FPRWIDTH into account.
Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The irq remapping layer seems to cause some confusion when people
see a different irq number in /proc/interrupts vs the one they
request in their driver or DTS.

So have the irq remapping layer print out a message when we map an
irq. The message is only printed the first time the irq is mapped,
and it's KERN_DEBUG so most people won't see it.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

commit 28794d34 ("powerpc/kconfig: Kill
PPC_MULTIPLATFORM") broke KEXEC, by making it dependent on BOOK3S, while it
should be PPC_BOOK3S.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

When we call giveup_fpu, we need to need to turn off VSX for the
current process.  If we don't, on return to userspace it may execute a
VSX instruction before the next FP instruction, and not have its
register state refreshed correctly from the thread_struct.  Ditto for
altivec.

This caused a bug where an unaligned lfs or stfs results in
fix_alignment calling giveup_fpu so it can use the FPRs (in order to
do a single <-> double conversion), and then returning to userspace
with FP off but VSX on.  Then if a VSX instruction is executed, before
another FP instruction, it will proceed without another exception and
hence have the incorrect register state for VSX registers 0-31.

   lfs unaligned   <- alignment exception turns FP off but leaves VSX on

   VSX instruction <- no exception since VSX on, hence we get the
                      wrong VSX register values for VSX registers 0-31,
                      which overlap the FPRs.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Enable relay in pseries config, ppc64_defconfig had it enabled but pseries
did not.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We specify a 64MB RMO, but the comment says 128MB.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Instead of checking for known events, pass in all 1s so we handle future
event types.  We were currently missing the IO event type.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

PHYP tells us how often a shared processor dispatch changed physical cpus.
This can highlight performance problems caused by the hypervisor.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Make all messages consistent, some have spaces before the "...", some do not.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The ibm,client-architecture method will often cause a reconfiguration reboot.
When this happens the last thing we see is:

	Hypertas detected, assuming LPAR !

Which doesn't explain what just happened.  Wrap the ibm,client-architecture
so it's clear what is going on:

	Calling ibm,client-architecture... done

In order to maintain the law of conservation of screen real estate, downgrade
two other messages to debug.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Remove duplicated #include's in
  - arch/powerpc/include/asm/ps3fb.h
  - arch/powerpc/kernel/setup-common.c
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The (relatively) new pmac_zilog driver doesn't use the pre-munged
IRQ numbers from the macio_dev unlike other macio things, it
directly maps it off the OF device-tree.

It does that because it can be initialized much earlier than the
registration of the macio devices, in order to get a serial
console early.

Unfortunately, that means that it "misses" some fixups done
by the macio layer to work around missing interrupt descriptions
in the device-tree of the Wallstreet machines.

This patch brings the necessary workaround into the pmac_zilog
driver itself to bring it back to working condition.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The buffer passed to the ibm,get-system-parameter RTAS call must be
in the RMA.  To ensure we pass an address in the RMA use rtas_data_buf
for the actual RTAS call and then copy the result to value.  We can't
just make it static because this can be compiled in as a module.

Also add the WDRTAS_SP_SPI_LEN so we don't litter '4' throughout the
function.
Signed-off-by: NMark Nelson <markn@au1.ibm.com>
Tested-by: NAdrian Reber <adrian@lisas.de>
Acked-by: NUtz Bacher <utz.bacher@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (120 commits)
  cx231xx: Convert to snd_card_create()
  V4L/DVB (11440): PWC: fix build error when CONFIG_INPUT=m
  V4L/DVB (11439): UVC: uvc_status_cleanup(): undefined reference to `input_unregister_device'
  V4L/DVB (11438): au0828: fix Kconfig dependance
  V4L/DVB (11437): pvrusb2: Drop client_register/unregister stubs
  V4L/DVB (11436): radio-mr800: convert to to v4l2_device
  V4L/DVB (11435): dsbr100 radio: convert to to v4l2_device
  V4L/DVB: zr364xx: remove unused #include <version.h>
  V4L/DVB: usbvision: remove unused #include <version.h>
  V4L/DVB (11427): gspca - m5602: Minor cleanups
  V4L/DVB (11426): gspca - m5602: Don't touch hflip/vflip register on Read/Modify/Write
  V4L/DVB (11425): gspca - m5602: Move the vflip quirk to probe stage.
  V4L/DVB (11424): gspca - m5602-ov9650: Use the local ctrl cache. Adjust image on vflip.
  V4L/DVB (11423): gspca - m5602-ov9650: Add a disconnect hook, setup a ctrl cache ctrl.
  V4L/DVB (11422): gspca - m5602-ov9650: Replace a magic constant with a define
  V4L/DVB (11421): gspca - m5602-ov9650: Synthesize modesetting.
  V4L/DVB (11420): gspca - m5602: Improve error handling in the ov9650 driver
  V4L/DVB (11419): gspca - m5602-ov9650: Don't read exposure data from COM1.
  V4L/DVB (11418): gspca - m5602-ov9650: Auto white balancing is on by default
  V4L/DVB (11417): gspca - m5602-ov9650: Autogain is on by default
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  b44: Use kernel DMA addresses for the kernel DMA API
  forcedeth: Fix resume from hibernation regression.
  xfrm: fix fragmentation on inter family tunnels
  ibm_newemac: Fix dangerous struct assumption
  gigaset: documentation update
  gigaset: in file ops, check for device disconnect before anything else
  bas_gigaset: use tasklet_hi_schedule for timing critical tasklets
  net/802/fddi.c: add MODULE_LICENSE
  smsc911x: remove unused #include <linux/version.h>
  axnet_cs: fix phy_id detection for bogus Asix chip.
  bnx2: Use request_firmware()
  b44: Fix sizes passed to b44_sync_dma_desc_for_{device,cpu}()
  socket: use percpu_add() while updating sockets_in_use
  virtio_net: Set the mac config only when VIRITO_NET_F_MAC
  myri_sbus: use request_firmware
  e1000: fix loss of multicast packets
  vxge: should include tcp.h

Conflict in firmware/WHENCE (SCSI vs net firmware)

We must not use the device DMA addresses for the kernel DMA API, because
device DMA addresses have an additional offset added for the SSB translation.

Use the original dma_addr_t for the sync operation.

Cc: stable@kernel.org
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reset phy state on resume, fixing a regression caused by powering down
the phy on hibernate.
Signed-off-by: NEd Swierk <eswierk@aristanetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert from snd_card_new() to the new snd_card_create() function.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix build errors when USB_PWC=y and INPUT=m.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix build errors when USB_VIDEO_CLASS=y and INPUT=m.
Fixes kernel bugzilla #12671.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix this build error:
ERROR: "videobuf_queue_vmalloc_init" [drivers/media/video/au0828/au0828.ko] undefined!
ERROR: "videobuf_vmalloc_free" [drivers/media/video/au0828/au0828.ko] undefined!
ERROR: "videobuf_to_vmalloc" [drivers/media/video/au0828/au0828.ko] undefined!
Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The client_register and client_unregister methods are optional so
there is no point in defining stub ones. Especially when these methods
are likely to be removed soon.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

radio-mr800: convert to to v4l2_device.
Signed-off-by: NAlexey Klimov <klimov.linux@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

dsbr100: convert to v4l2_device.
Signed-off-by: NAlexey Klimov <klimov.linux@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove unused #include <version.h> in drivers/media/video/zr364xx.c.
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove unused #include <version.h> in
drivers/media/video/usbvision/usbvision-i2c.c.
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove an unnecessary error check and reorder some code.
Signed-off-by: NErik Andr?n <erik.andren@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Touching the hflip/vflip register while doing the read/modify/write corrupts the image. Just read from the sensor ctrl cache instead and all is good.
Signed-off-by: NErik Andr?n <erik.andren@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The vflip quirk is better checked at probe time as it's only needed once.
Also add an extra reset at init time to resolve a suspend to ram regression.
Signed-off-by: NErik Andr?n <erik.andren@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NErik Andr?n <erik.andren@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Reading and writing to a register doesn't always work reliably. Add a cache
and ensure that it is deallocated properly upon module disconnect.
Signed-off-by: NErik Andr?n <erik.andren@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>