- 29 7月, 2006 1 次提交
-
-
由 Olaf Hering 提交于
The firmware of POWER4 and JS20 systems does not switch the cpu to 64bit mode when the registered system_reset and machine_check handlers get called. If a 32bit process runs on that cpu at the time of the event, the cpu remains in 32bit mode. xmon and kdump can not deal with it, the result is an error like 'Bad kernel stack pointer fff2aad0 at 3200'. xmon just loses some register info, but booting the kdump kernel usually fails. Both handlers are not hot paths. Duplicate the EXCEPTION_PROLOG_PSERIES macro and add two instructions to switch to 64bit: li r11,5; rldimi r10,r11,61,0; Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 28 7月, 2006 3 次提交
-
-
由 Segher Boessenkool 提交于
As the code comment already says, the Maple device-tree is incorrect here; make the Linux code detect the correct thing, too. Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Segher Boessenkool 提交于
All U3/U4 based systems are big-endian, not all express it in their device trees. Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
The Xserve G5 are capable of frequency switching like other desktop G5s. This enables it. It also fix a Kconfig issue which prevented from building the G5 cpufreq support if CONFIG_PMAC_SMU was not set (the first version of that driver only worked with SMU based macs, but this isn't the case anymore). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 25 7月, 2006 8 次提交
-
-
由 Michael Ellerman 提交于
There's a bug in my cleaned up mem= handling, if the memory limit is larger than the RMO size we'll erroneously enlarge the RMO size. Fix is to only change the RMO size if the memory limit is less than the current RMO value. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
There were still some issues with offb when BootX doesn't provide a proper display node, this fixes them. This also re-instates the palette hacks that were disabled a couple of kernel versions ago when I converted to the new OF parsing, and shuffles some functions around to avoid prototypes. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
The code in legacy_serial.c wouldn't properly compare OF translation results against OF_BAD_ADDR as it's using a phys_addr_t which is 32 bits on some 32-bit powerpc platforms. This fixes it by always using a u64 which is what is returned by the OF parsing routines. It also makes translation failure harmless for ISA serial ports. If they can't translate, we can't use the UART early, but we can still let the 8250 driver use it later on by using IO port accessors. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
This patch makes it possible to provide 0 as the clock value for udbg_16550, making it default to the standard 1.8432Mhz clock Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
Pseudo-CHRP machines like Pegasos without an MPIC would crash at boot if CONFIG_SMP was set because the "smp_ops" pointer was set to MPIC related ops unconditionally. This patch makes it NULL on machines that don't support SMP and provides proper default behaviour in the callers when smp_ops is NULL. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
A warning is hurting my eyes when building 32 bits kernels Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
The Pegasos firmware doesn't create a valid "ranges" property for the ISA bridge, thus causing translation of ISA addresses and IO ports to fail. This fixes it, thus re-enabling proper early serial console to work on Pegasos. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Johannes Berg 提交于
This patch fixes the front-LED Kconfig issues I introduced while creating it. Apparently having a dependency isn't enough to have the select not evaluated or something like that. The patch also changes the default configuration for pmac32 select the default for the LED to be the IDE trigger. While I was at it, I completely updated the defconfig and also added snd-aoa to it. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 22 7月, 2006 10 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Found by scrashme. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Raymond Burns 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Raymond Burns 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
By using for_each_node_by_type(). Also, correct a spurioud test in check_cpu_node() on sparc64. It is only called with nodes that have device_type "cpu". Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Raymond Burns 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
1) Explicitly traverse to the root looking for the "sbi". 2) Grab the "board#" property from the sbi's parent and verify that this parent is an "io-unit" node. 3) Skip IRQ initialization when device lacks "reg" property. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bob Breuer 提交于
On sparc32 the prom_{first,next}prop() interfaces work a little differently. The buffer argument is ignored on sparc32 and the firmware just returns a raw pointer to the property name. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The m68k port's sun3 asm/oplib.h had a stray reference too, so I killed that off as well. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sabre and Psycho PCI controllers can have partial interrupt-map properties, meaning that on-board devices don't match up to any entries. Instead, they are fully specified from the beginning and we should pass them directly to the IRQ translator as-is. Also, fill in the necessary translator slots for the "graphics" and "expansion UPA" interrupts on Sabre, Psycho, and SYSIO SBUS. Increase PROMREG_MAX to 24, as seen on SUNW,ffb devices. Finally, prevent accidentally writing past the end of the of_device struct resource[] and irqs[] arrays. Spit out a log message when we ignore some entries because there are too many of them. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 7月, 2006 2 次提交
-
-
由 Heiko Carstens 提交于
Take return values of sysfs_create_group & friends into account. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
SLES9 binutils don't like .align 4096 statements in head.S. Work around this by using .org statements. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 16 7月, 2006 1 次提交
-
-
由 Jeff Dike 提交于
Some -mm-only material leaked into a patch destined for mainline, and I didn't notice. This was the replacement of system_utsname with utsname() that's required by the uts namespace patch. This patch reverts those changes (which are correct in -mm) so that mainline UML builds again. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 15 7月, 2006 10 次提交
-
-
由 Jeff Dike 提交于
Clean up whitespace and return syntax in os.h. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
On top of the previous biarch changes for UML, this makes the preprocessor changes a bit cleaner. Specify the 64-bit build in CPPFLAGS on the x86_64 SUBARCH, rather than #undef'ing i386. Compile-tested with i386 and x86_64 SUBARCHs. Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
The UML_SETJMP macro was requiring its users to pass in a argument which it could supply itself, since it wasn't used outside that invocation of the macro. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Vadim Lobanov 提交于
On i386, the user space accessor functions copy_from/to_user() both invoke might_sleep(), do a quick sanity check, and then pass the work on to their __copy_from/to_user() counterparts, which again invoke might_sleep(). Given that no actual work happens between these two calls, it is best to eliminate one of the redundant might_sleep()s. Signed-off-by: NVadim Lobanov <vlobanov@speakeasy.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric W. Biederman 提交于
This patch removes the foolish assumption that SMP implied local apics. That assumption is not-true on the Voyager subarch. This makes that dependency explicit, and allows the code to build. What gets disabled is just an optimization to get better crash dumps so the support should work if there is a kernel that will initialization on the voyager subarch under those harsh conditions. Hopefully we can figure out how to initialize apics in init_IRQ and remove the need to disable io_apics and this dependency. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Catalin Marinas 提交于
Signed-off-by: NCatalin Marinas <catalin.marinas@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chuck Ebbert 提交于
handle_BUG() tries to print file and line number even when they're not available (CONFIG_DEBUG_BUGVERBOSE is not set.) Change this to print a message stating info is unavailable instead of printing a misleading message. Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Marc Zyngier 提交于
pbm->name should be initialized before calling pbm_register_toplevel_resources. Move the call a few lines down to avoid a nice Oops. Signed-off-by: NMarc Zyngier <maz@misterjones.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
We shouldn't overwrite it, it's the device node full name already and that's what we want. Based upon a report from Marc Zyngier. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Else we trigger the new irqs_disable() assertion in start_kernel(). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 7月, 2006 5 次提交
-
-
由 Atsushi Nemoto 提交于
With sparsemem, pfn should be checked by pfn_valid() before pfn_to_page(). Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-