Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 15 10月, 2021 1 次提交
  3. 16 4月, 2021 4 次提交
  5. 08 4月, 2021 2 次提交
  7. 26 3月, 2021 2 次提交
    • D
      xfs: initialise attr fork on inode create · e6a688c3
      由 Dave Chinner 提交于 
      When we allocate a new inode, we often need to add an attribute to
the inode as part of the create. This can happen as a result of
needing to add default ACLs or security labels before the inode is
made visible to userspace.

This is highly inefficient right now. We do the create transaction
to allocate the inode, then we do an "add attr fork" transaction to
modify the just created empty inode to set the inode fork offset to
allow attributes to be stored, then we go and do the attribute
creation.

This means 3 transactions instead of 1 to allocate an inode, and
this greatly increases the load on the CIL commit code, resulting in
excessive contention on the CIL spin locks and performance
degradation:

 18.99%  [kernel]                [k] __pv_queued_spin_lock_slowpath
  3.57%  [kernel]                [k] do_raw_spin_lock
  2.51%  [kernel]                [k] __raw_callee_save___pv_queued_spin_unlock
  2.48%  [kernel]                [k] memcpy
  2.34%  [kernel]                [k] xfs_log_commit_cil

The typical profile resulting from running fsmark on a selinux enabled
filesytem is adds this overhead to the create path:

  - 15.30% xfs_init_security
     - 15.23% security_inode_init_security
	- 13.05% xfs_initxattrs
	   - 12.94% xfs_attr_set
	      - 6.75% xfs_bmap_add_attrfork
		 - 5.51% xfs_trans_commit
		    - 5.48% __xfs_trans_commit
		       - 5.35% xfs_log_commit_cil
			  - 3.86% _raw_spin_lock
			     - do_raw_spin_lock
				  __pv_queued_spin_lock_slowpath
		 - 0.70% xfs_trans_alloc
		      0.52% xfs_trans_reserve
	      - 5.41% xfs_attr_set_args
		 - 5.39% xfs_attr_set_shortform.constprop.0
		    - 4.46% xfs_trans_commit
		       - 4.46% __xfs_trans_commit
			  - 4.33% xfs_log_commit_cil
			     - 2.74% _raw_spin_lock
				- do_raw_spin_lock
				     __pv_queued_spin_lock_slowpath
			       0.60% xfs_inode_item_format
		      0.90% xfs_attr_try_sf_addname
	- 1.99% selinux_inode_init_security
	   - 1.02% security_sid_to_context_force
	      - 1.00% security_sid_to_context_core
		 - 0.92% sidtab_entry_to_string
		    - 0.90% sidtab_sid2str_get
			 0.59% sidtab_sid2str_put.part.0
	   - 0.82% selinux_determine_inode_label
	      - 0.77% security_transition_sid
		   0.70% security_compute_sid.part.0

And fsmark creation rate performance drops by ~25%. The key point to
note here is that half the additional overhead comes from adding the
attribute fork to the newly created inode. That's crazy, considering
we can do this same thing at inode create time with a couple of
lines of code and no extra overhead.

So, if we know we are going to add an attribute immediately after
creating the inode, let's just initialise the attribute fork inside
the create transaction and chop that whole chunk of code out of
the create fast path. This completely removes the performance
drop caused by enabling SELinux, and the profile looks like:

     - 8.99% xfs_init_security
         - 9.00% security_inode_init_security
            - 6.43% xfs_initxattrs
               - 6.37% xfs_attr_set
                  - 5.45% xfs_attr_set_args
                     - 5.42% xfs_attr_set_shortform.constprop.0
                        - 4.51% xfs_trans_commit
                           - 4.54% __xfs_trans_commit
                              - 4.59% xfs_log_commit_cil
                                 - 2.67% _raw_spin_lock
                                    - 3.28% do_raw_spin_lock
                                         3.08% __pv_queued_spin_lock_slowpath
                                   0.66% xfs_inode_item_format
                        - 0.90% xfs_attr_try_sf_addname
                  - 0.60% xfs_trans_alloc
            - 2.35% selinux_inode_init_security
               - 1.25% security_sid_to_context_force
                  - 1.21% security_sid_to_context_core
                     - 1.19% sidtab_entry_to_string
                        - 1.20% sidtab_sid2str_get
                           - 0.86% sidtab_sid2str_put.part.0
                              - 0.62% _raw_spin_lock_irqsave
                                 - 0.77% do_raw_spin_lock
                                      __pv_queued_spin_lock_slowpath
               - 0.84% selinux_determine_inode_label
                  - 0.83% security_transition_sid
                       0.86% security_compute_sid.part.0

Which indicates the XFS overhead of creating the selinux xattr has
been halved. This doesn't fix the CIL lock contention problem, just
means it's not a limiting factor for this workload. Lock contention
in the security subsystems is going to be an issue soon, though...
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
[djwong: fix compilation error when CONFIG_SECURITY=n]
Reviewed-by: NDarrick J. Wong <djwong@kernel.org>
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NGao Xiang <hsiangkao@redhat.com>
      e6a688c3
    • D
      xfs: validate ag btree levels using the precomputed values · 973975b7
      由 Darrick J. Wong 提交于 
      Use the AG btree height limits that we precomputed into the xfs_mount to
validate the AG headers instead of using XFS_BTREE_MAXLEVELS.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
      973975b7
  9. 23 1月, 2021 2 次提交
  11. 07 9月, 2020 1 次提交
  13. 29 7月, 2020 1 次提交
  15. 20 5月, 2020 7 次提交
  17. 05 5月, 2020 1 次提交
  19. 19 3月, 2020 1 次提交
  21. 19 11月, 2019 1 次提交
  23. 05 11月, 2019 1 次提交
  25. 22 10月, 2019 1 次提交
    • D
      xfs: fix inode fork extent count overflow · 3f8a4f1d
      由 Dave Chinner 提交于 
      [commit message is verbose for discussion purposes - will trim it
down later. Some questions about implementation details at the end.]

Zorro Lang recently ran a new test to stress single inode extent
counts now that they are no longer limited by memory allocation.
The test was simply:

# xfs_io -f -c "falloc 0 40t" /mnt/scratch/big-file
# ~/src/xfstests-dev/punch-alternating /mnt/scratch/big-file

This test uncovered a problem where the hole punching operation
appeared to finish with no error, but apparently only created 268M
extents instead of the 10 billion it was supposed to.

Further, trying to punch out extents that should have been present
resulted in success, but no change in the extent count. It looked
like a silent failure.

While running the test and observing the behaviour in real time,
I observed the extent coutn growing at ~2M extents/minute, and saw
this after about an hour:

# xfs_io -f -c "stat" /mnt/scratch/big-file |grep next ; \
> sleep 60 ; \
> xfs_io -f -c "stat" /mnt/scratch/big-file |grep next
fsxattr.nextents = 127657993
fsxattr.nextents = 129683339
#

And a few minutes later this:

# xfs_io -f -c "stat" /mnt/scratch/big-file |grep next
fsxattr.nextents = 4177861124
#

Ah, what? Where did that 4 billion extra extents suddenly come from?

Stop the workload, unmount, mount:

# xfs_io -f -c "stat" /mnt/scratch/big-file |grep next
fsxattr.nextents = 166044375
#

And it's back at the expected number. i.e. the extent count is
correct on disk, but it's screwed up in memory. I loaded up the
extent list, and immediately:

# xfs_io -f -c "stat" /mnt/scratch/big-file |grep next
fsxattr.nextents = 4192576215
#

It's bad again. So, where does that number come from?
xfs_fill_fsxattr():

                if (ip->i_df.if_flags & XFS_IFEXTENTS)
                        fa->fsx_nextents = xfs_iext_count(&ip->i_df);
                else
                        fa->fsx_nextents = ip->i_d.di_nextents;

And that's the behaviour I just saw in a nutshell. The on disk count
is correct, but once the tree is loaded into memory, it goes whacky.
Clearly there's something wrong with xfs_iext_count():

inline xfs_extnum_t xfs_iext_count(struct xfs_ifork *ifp)
{
        return ifp->if_bytes / sizeof(struct xfs_iext_rec);
}

Simple enough, but 134M extents is 2**27, and that's right about
where things went wrong. A struct xfs_iext_rec is 16 bytes in size,
which means 2**27 * 2**4 = 2**31 and we're right on target for an
integer overflow. And, sure enough:

struct xfs_ifork {
        int                     if_bytes;       /* bytes in if_u1 */
....

Once we get 2**27 extents in a file, we overflow if_bytes and the
in-core extent count goes wrong. And when we reach 2**28 extents,
if_bytes wraps back to zero and things really start to go wrong
there. This is where the silent failure comes from - only the first
2**28 extents can be looked up directly due to the overflow, all the
extents above this index wrap back to somewhere in the first 2**28
extents. Hence with a regular pattern, trying to punch a hole in the
range that didn't have holes mapped to a hole in the first 2**28
extents and so "succeeded" without changing anything. Hence "silent
failure"...

Fix this by converting if_bytes to a int64_t and converting all the
index variables and size calculations to use int64_t types to avoid
overflows in future. Signed integers are still used to enable easy
detection of extent count underflows. This enables scalability of
extent counts to the limits of the on-disk format - MAXEXTNUM
(2**31) extents.

Current testing is at over 500M extents and still going:

fsxattr.nextents = 517310478
Reported-by: NZorro Lang <zlang@redhat.com>
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
      3f8a4f1d
  27. 27 8月, 2019 1 次提交
  29. 29 6月, 2019 2 次提交
  31. 30 7月, 2018 3 次提交
  33. 07 6月, 2018 1 次提交
    • D
      xfs: convert to SPDX license tags · 0b61f8a4
      由 Dave Chinner 提交于 
      Remove the verbose license text from XFS files and replace them
with SPDX tags. This does not change the license of any of the code,
merely refers to the common, up-to-date license files in LICENSES/

This change was mostly scripted. fs/xfs/Makefile and
fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected
and modified by the following command:

for f in `git grep -l "GNU General" fs/xfs/` ; do
	echo $f
	cat $f | awk -f hdr.awk > $f.new
	mv -f $f.new $f
done

And the hdr.awk script that did the modification (including
detecting the difference between GPL-2.0 and GPL-2.0+ licenses)
is as follows:

$ cat hdr.awk
BEGIN {
	hdr = 1.0
	tag = "GPL-2.0"
	str = ""
}

/^ \* This program is free software/ {
	hdr = 2.0;
	next
}

/any later version./ {
	tag = "GPL-2.0+"
	next
}

/^ \*\// {
	if (hdr > 0.0) {
		print "// SPDX-License-Identifier: " tag
		print str
		print $0
		str=""
		hdr = 0.0
		next
	}
	print $0
	next
}

/^ \* / {
	if (hdr > 1.0)
		next
	if (hdr > 0.0) {
		if (str != "")
			str = str "\n"
		str = str $0
		next
	}
	print $0
	next
}

/^ \*/ {
	if (hdr > 0.0)
		next
	print $0
	next
}

// {
	if (hdr > 0.0) {
		if (str != "")
			str = str "\n"
		str = str $0
		next
	}
	print $0
}

END { }
$
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
      0b61f8a4
  35. 24 3月, 2018 2 次提交
  37. 18 1月, 2018 1 次提交
  39. 09 1月, 2018 3 次提交
  41. 21 11月, 2017 1 次提交
  43. 07 11月, 2017 1 次提交