- 24 4月, 2014 1 次提交
-
-
由 Ian Campbell 提交于
As part of this make the usual change to xen_ulong_t in place of unsigned long. This change has no impact on x86. The Linux definition of struct multicall_entry.result differs from the Xen definition, I think for good reasons, and used a long rather than an unsigned long. Therefore introduce a xen_long_t, which is a long on x86 architectures and a signed 64-bit integer on ARM. Use uint32_t nr_calls on x86 for consistency with the ARM definition. Build tested on amd64 and i386 builds. Runtime tested on ARM. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
- 29 11月, 2012 1 次提交
-
-
由 Ian Campbell 提交于
We use XENMEM_add_to_physmap_range which is the preferred interface for foreign mappings. Acked-by: NMukesh Rathor <mukesh.rathor@oracle.com> Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 20 10月, 2012 2 次提交
-
-
由 Ian Campbell 提交于
This correctly sizes it as 64 bit on ARM but leaves it as unsigned long on x86 (therefore no intended change on x86). The long and ulong guest handles are now unused (and a bit dangerous) so remove them. Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Ian Campbell 提交于
Define PRI macros for xen_ulong_t and xen_pfn_t and use to fix: drivers/xen/sys-hypervisor.c:288:4: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'xen_ulong_t' [-Wformat] Ideally this would use PRIx64 on ARM but these (or equivalent) don't seem to be available in the kernel. Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 03 10月, 2012 1 次提交
-
-
由 David Howells 提交于
Convert #include "..." to #include <path/...> in kernel system headers. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDave Jones <davej@redhat.com>
-
- 23 8月, 2012 1 次提交
-
-
由 Stefano Stabellini 提交于
All the original Xen headers have xen_pfn_t as mfn and pfn type, however when they have been imported in Linux, xen_pfn_t has been replaced with unsigned long. That might work for x86 and ia64 but it does not for arm. Bring back xen_pfn_t and let each architecture define xen_pfn_t as they see fit. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 22 8月, 2012 1 次提交
-
-
由 Stefano Stabellini 提交于
Changes in v2: - remove pvclock hack; - remove include linux/types.h from xen/interface/xen.h. v3: - Compile under IA64 Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 14 9月, 2012 1 次提交
-
-
由 Stefano Stabellini 提交于
All the original Xen headers have xen_ulong_t as unsigned long type, however when they have been imported in Linux, xen_ulong_t has been replaced with unsigned long. That might work for x86 and ia64 but it does not for arm. Bring back xen_ulong_t and let each architecture define xen_ulong_t as they see fit. Also explicitly size pointers (__DEFINE_GUEST_HANDLE) to 64 bit. Changes in v3: - remove the incorrect changes to multicall_entry; - remove the change to apic_physbase. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 11 3月, 2012 1 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
For the hypervisor to take advantage of the MWAIT support it needs to extract from the ACPI _CST the register address. But the hypervisor does not have the support to parse DSDT so it relies on the initial domain (dom0) to parse the ACPI Power Management information and push it up to the hypervisor. The pushing of the data is done by the processor_harveset_xen module which parses the information that the ACPI parser has graciously exposed in 'struct acpi_processor'. For the ACPI parser to also expose the Cx states for MWAIT, we need to expose the MWAIT capability (leaf 1). Furthermore we also need to expose the MWAIT_LEAF capability (leaf 5) for cstate.c to properly function. The hypervisor could expose these flags when it traps the XEN_EMULATE_PREFIX operations, but it can't do it since it needs to be backwards compatible. Instead we choose to use the native CPUID to figure out if the MWAIT capability exists and use the XEN_SET_PDC query hypercall to figure out if the hypervisor wants us to expose the MWAIT_LEAF capability or not. Note: The XEN_SET_PDC query was implemented in c/s 23783: "ACPI: add _PDC input override mechanism". With this in place, instead of C3 ACPI IOPORT 415 we get now C3:ACPI FFH INTEL MWAIT 0x20 Note: The cpu_idle which would be calling the mwait variants for idling never gets set b/c we set the default pm_idle to be the hypercall variant. Acked-by: NJan Beulich <JBeulich@suse.com> [v2: Fix missing header file include and #ifdef] Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 27 9月, 2011 1 次提交
-
-
由 Yu Ke 提交于
This patches implements the xen_platform_op hypercall, to pass the parsed ACPI info to hypervisor. Signed-off-by: NYu Ke <ke.yu@intel.com> Signed-off-by: NTian Kevin <kevin.tian@intel.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> [v1: Added DEFINE_GUEST.. in appropiate headers] [v2: Ripped out typedefs] Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 18 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
They were generated by 'codespell' and then manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi> Cc: trivial@kernel.org LKML-Reference: <1300389856-1099-3-git-send-email-lucas.demarchi@profusion.mobi> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 13 11月, 2010 1 次提交
-
-
由 Ian Campbell 提交于
This hypercall allows Xen to specify a non-default location for the machine to physical mapping. This capability is used when running a 32 bit domain 0 on a 64 bit hypervisor to shrink the hypervisor hole to exactly the size required. [ Impact: add Xen hypercall definitions ] Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
-
- 23 10月, 2008 3 次提交
-
-
由 H. Peter Anvin 提交于
Drop double underscores from header guards in arch/x86/include. They are used inconsistently, and are not necessary. Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 H. Peter Anvin 提交于
Change header guards named "ASM_X86__*" to "_ASM_X86_*" since: a. the double underscore is ugly and pointless. b. no leading underscore violates namespace constraints. Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 23 7月, 2008 1 次提交
-
-
由 Vegard Nossum 提交于
This patch is the result of an automatic script that consolidates the format of all the headers in include/asm-x86/. The format: 1. No leading underscore. Names with leading underscores are reserved. 2. Pathname components are separated by two underscores. So we can distinguish between mm_types.h and mm/types.h. 3. Everything except letters and numbers are turned into single underscores. Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>
-
- 16 7月, 2008 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Copy 64-bit definitions of various interface structures into place. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 25 4月, 2008 2 次提交
-
-
由 Isaku Yamahata 提交于
Add xen handles realted definitions for grant table which ia64/xen needs. Pointer argumsnts for ia64/xen hypercall are passed in pseudo physical address (guest physical address) so that it is required to convert guest kernel virtual address into pseudo physical address right before issuing hypercall. The xen guest handle represents such arguments. Define necessary handles and helper functions. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Jeremy Fitzhardinge 提交于
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 11 10月, 2007 1 次提交
-
-
由 Thomas Gleixner 提交于
Move the headers to include/asm-x86 and fixup the header install make rules Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 18 7月, 2007 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Add Xen interface header files. These are taken fairly directly from the Xen tree, but somewhat rearranged to suit the kernel's conventions. Define macros and inline functions for doing hypercalls into the hypervisor. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NIan Pratt <ian.pratt@xensource.com> Signed-off-by: NChristian Limpach <Christian.Limpach@cl.cam.ac.uk> Signed-off-by: NChris Wright <chrisw@sous-sol.org>
-