Add panel identification entry for the sharp LQ140M1JW46 eDP panel
with power sequencing delay information.
Signed-off-by: NSankeerth Billakanti <quic_sbillaka@quicinc.com>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1647452154-16361-5-git-send-email-quic_sbillaka@quicinc.com

Add binding for the leadtek ltk035c5444t, which is a 640x480
mipi-dbi over spi / 24-bit RGB panel based on the newvision
NV03052C chipset.

It is found in the Anbernic RG350M mips handheld.
Signed-off-by: NChristophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Reviewed-by: NRob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311170240.173846-5-cbranchereau@gmail.com

Commit 0d030118 ("fbdev: Improve performance of cfb_imageblit()")
broke cfb_imageblit() for image widths that are not aligned to 8-bit
boundaries. Fix this by handling the trailing pixels on each line
separately. The performance improvements in the original commit do not
regress by this change.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Fixes: 0d030118 ("fbdev: Improve performance of cfb_imageblit()")
Reviewed-by: NJavier Martinez Canillas <javierm@redhat.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reported-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220313192952.12058-3-tzimmermann@suse.de

Commit 6f29e049 ("fbdev: Improve performance of sys_imageblit()")
broke sys_imageblit() for image width that are not aligned to 8-bit
boundaries. Fix this by handling the trailing pixels on each line
separately. The performance improvements in the original commit do not
regress by this change.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Fixes: 6f29e049 ("fbdev: Improve performance of sys_imageblit()")
Reviewed-by: NJavier Martinez Canillas <javierm@redhat.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220313192952.12058-2-tzimmermann@suse.de

Use the gma_ prefix instead of psb_ since the code is common for all
chips. Various coding style fixes. Removal of unused code. Removal of
duplicate function declarations.
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317092555.17882-4-patrik.r.jakobsson@gmail.com

The drm_crtc_funcs are all generic and no chip specific functions are
necessary. We can therefore directly put gma_crtc_funcs into the
drm_crtc.
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317092555.17882-3-patrik.r.jakobsson@gmail.com

All functions live in gma_display.c already so move the vtable. Also
shorten the name to gma_crtc_funcs.
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317092555.17882-2-patrik.r.jakobsson@gmail.com

Most of these are old leftovers from one of the driver merges. This is
all dead code.
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317092555.17882-1-patrik.r.jakobsson@gmail.com

Trace submit_cl_ioctl and related IRQs for CL submission and bin/render
jobs execution. It might be helpful to get a rendering timeline and
track job throttling.
Signed-off-by: NMelissa Wen <mwen@igalia.com>
Reviewed-by: NJose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201212651.zhltjmaokisffq3x@mail.igalia.com

ssd130x_clear_screen() allocates a temporary buffer sized to hold one
byte per pixel, while it only needs to hold one bit per pixel.

ssd130x_fb_blit_rect() allocates a temporary buffer sized to hold one
byte per pixel for the whole frame buffer, while it only needs to hold
one bit per pixel for the part that is to be updated.
Pass dst_pitch to drm_fb_xrgb8888_to_mono(), as we have already
calculated it anyway.

Fixes: a61732e8 ("drm: Add driver for Solomon SSD130x OLED displays")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NJavier Martinez Canillas <javierm@redhat.com>
Signed-off-by: NJavier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317081830.1211400-5-geert@linux-m68k.org

The rectangle update functions ssd130x_fb_blit_rect() and
ssd130x_update_rect() do not behave correctly when x1 != 0 or y1 !=
0, or when y1 or y2 are not aligned to display page boundaries.
E.g. when used as a text console, only the first line of text is shown
on the display.

  1. The buffer passed by ssd130x_fb_blit_rect() points to the first
     byte of monochrome bitmap data, and thus has its origin at (x1,
     y1), while ssd130x_update_rect() assumes it is at (0, 0).
     Fix ssd130x_update_rect() by changing the vertical and horizontal
     loop ranges, and adding the offsets only when needed.

  2. In ssd130x_fb_blit_rect(), align y1 and y2 to the display page
     boundaries before doing the color conversion, so the full page
     is converted and updated.
     Remove the correction for an unaligned y1 from
     ssd130x_update_rect(), and add a check to make sure y1 is aligned.

Fixes: a61732e8 ("drm: Add driver for Solomon SSD130x OLED displays")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NJavier Martinez Canillas <javierm@redhat.com>
Signed-off-by: NJavier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317081830.1211400-4-geert@linux-m68k.org

The conversion functions drm_fb_xrgb8888_to_mono() and
drm_fb_gray8_to_mono_line() do not behave correctly when the
horizontal boundaries of the clip rectangle are not multiples of 8:
  a. When x1 % 8 != 0, the calculated pitch is not correct,
  b. When x2 % 8 != 0, the pixel data for the last byte is wrong.

Simplify the code and fix (a) by:
  1. Removing start_offset, and always storing the first pixel in the
     first bit of the monochrome destination buffer.
     Drivers that require the first pixel in a byte to be located at an
     x-coordinate that is a multiple of 8 can always align the clip
     rectangle before calling drm_fb_xrgb8888_to_mono().
     Note that:
       - The ssd130x driver does not need the alignment, as the
	 monochrome buffer is a temporary format,
       - The repaper driver always updates the full screen, so the clip
	 rectangle is always aligned.
  2. Passing the number of pixels to drm_fb_gray8_to_mono_line(),
     instead of the number of bytes, and the number of pixels in the
     last byte.

Fix (b) by explicitly setting the target bit, instead of always setting
bit 7 and shifting the value in each loop iteration.

Remove the bogus pitch check, which operates on bytes instead of pixels,
and triggers when e.g. flashing the cursor on a text console with a font
that is 8 pixels wide.

Drop the confusing comment about scanlines, as a pitch in bytes always
contains a multiple of 8 pixels.

While at it, use the drm_rect_height() helper instead of open-coding the
same operation.

Update the comments accordingly.

Fixes: bcf8b616 ("drm/format-helper: Add drm_fb_xrgb8888_to_mono_reversed()")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NJavier Martinez Canillas <javierm@redhat.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NJavier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317081830.1211400-3-geert@linux-m68k.org

There is no "reversed" handling in drm_fb_xrgb8888_to_mono_reversed():
the function just converts from color to grayscale, and reduces the
number of grayscale levels from 256 to 2 (i.e. brightness 0-127 is
mapped to 0, 128-255 to 1).  All "reversed" handling is done in the
repaper driver, where this function originated.

Hence make this clear by renaming drm_fb_xrgb8888_to_mono_reversed() to
drm_fb_xrgb8888_to_mono(), and documenting the black/white pixel
mapping.

Fixes: bcf8b616 ("drm/format-helper: Add drm_fb_xrgb8888_to_mono_reversed()")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NJavier Martinez Canillas <javierm@redhat.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NJavier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317081830.1211400-2-geert@linux-m68k.org

The documentation for render nodes indicates that only "PRIME-related"
ioctls are valid on render nodes, but the documentation does not clarify
what that means.  If the reader is not familiar with PRIME, they may
beleive this to be only the ioctls with "PRIME" in the name and not other
ioctls such as set of syncobj ioctls.  Clarify the situation for the
reader by referencing where the reader will find a current list of valid
ioctls.
Signed-off-by: NJeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: NPekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1646667156-16366-1-git-send-email-quic_jhugo@quicinc.com

There is a spelling mistake in a nvdev_error error message. Fix it.
Signed-off-by: NColin Ian King <colin.i.king@gmail.com>
Reviewed-by: NLyude Paul <lyude@redhat.com>
Signed-off-by: NLyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315221929.2959700-1-colin.i.king@gmail.com

Move the setup code for GTT/GATT memory ranges into a new helper and
call the function from psb_gtt_init() and psb_gtt_resume(). Removes
code duplication.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-13-tzimmermann@suse.de

Move the code for enabling and disabling the GTT into helpers and call
the functions in psb_gtt_init(), psb_gtt_fini() and psb_gtt_resume().
Removes code duplication.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-12-tzimmermann@suse.de

Move GEM functions from gtt.c to gem.c. Adapt some names. No
functional changes.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-11-tzimmermann@suse.de

Inline psb_gtt_restore() into its only caller in power.c.

Perform the GTT restoration in psb_gem_mm_resume(). The restoration
step is part of GEM anyway and will be moved over at some point.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-10-tzimmermann@suse.de

The GTT init, fini and resume functions contain both, GTT and GEM,
code. Split each into a separate GTT and a GEM function. The GEM
code is responsible for mmap_mutex and the stolen memory area. The
rest of the functionality is left in GTT functions.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-9-tzimmermann@suse.de

Replace psb_gtt_takedown() with finalizer function that is only called
for unloading the driver. Use roll-back pattern for error handling in
psb_gtt_init() and _resume(). Also fixes a bug where vmap_addr was never
unmapped.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-8-tzimmermann@suse.de

The current implementation of psb_gtt_init() also does resume
handling. Move the resume code into its own helper.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-7-tzimmermann@suse.de

The GTT init and restore functions contain logic to populate the
GTT entries. Move the code into helper functions.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-6-tzimmermann@suse.de

The semaphore at struct psb_mmu_driver.sem protects access to the MMU
fields. Additional locking with struct psb_gtt.sem is unnecessary. Remove
the field and related code.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-5-tzimmermann@suse.de

Acquire the GTT mutex in psb_gtt_{insert,remove}_pages(). Remove
locking from callers. Also remove the GTT locking around the resume
code. Resume does not run concurrently with other GTT operations.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-4-tzimmermann@suse.de

Protect concurrent access to struct psb_gem_object by acquiring
the GEM object's reservation lock; as it's supposed to be. The
use of the GTT mutex can now be moved into GTT code.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-3-tzimmermann@suse.de

Calculate the number of pages in the BO's backing storage from
the size. Remove the npage field.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-2-tzimmermann@suse.de

WARNING: unmet direct dependencies detected for DRM_GEM_SHMEM_HELPER
  Depends on [n]: HAS_IOMEM [=y] && DRM [=m] && MMU [=n]
  Selected by [m]:
  - DRM_SSD130X [=m] && HAS_IOMEM [=y] && DRM [=m]

DRM_GEM_SHMEM_HELPER depends on MMU, DRM_SSD130X should also depends on MMU.

Fixes: a61732e8 ("drm: Add driver for Solomon SSD130x OLED displays")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NJavier Martinez Canillas <javierm@redhat.com>
Signed-off-by: NJavier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220312063437.19160-1-yuehaibing@huawei.com

The documentation for drm_rotation_simplify() uses DRM_MODE_ROTATE_X,
while it's clear the comment should mention DRM_MODE_REFLECT_X
instead. The example passes all flags except the DRM_MODE_REFLECT_X as
supported and expects to eliminate this flag.

Fixes: c2c446ad ("drm: Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ to UAPI")
Signed-off-by: NDmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: NSimon Ser <contact@emersion.fr>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220316074648.7009-1-dmitry.baryshkov@linaro.org

Replace the hand rolled drm_mode_duplicate() with the
real thing.

@is_dup@
@@
drm_mode_duplicate(...)
{ ... }

@depends on !is_dup@
expression dev, oldmode;
identifier newmode;
@@
- newmode = drm_mode_create(dev);
+ newmode = drm_mode_duplicate(dev, oldmode);
  ...
- drm_mode_copy(newmode, oldmode);
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-21-ville.syrjala@linux.intel.comAcked-by: NSam Ravnborg <sam@ravnborg.org>

Replace the hand rolled drm_mode_duplicate() with the
real thing.

@is_dup@
@@
drm_mode_duplicate(...)
{ ... }

@depends on !is_dup@
expression dev, oldmode;
identifier newmode;
@@
- newmode = drm_mode_create(dev);
+ newmode = drm_mode_duplicate(dev, oldmode);
  ...
- drm_mode_copy(newmode, oldmode);

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-10-ville.syrjala@linux.intel.comReviewed-by: NPhilipp Zabel <p.zabel@pengutronix.de>

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-7-ville.syrjala@linux.intel.comReviewed-by: NAndrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Add a variant of drm_mode_copy() that explicitly clears out
the list head of the destination mode. Helpful to guarantee
we don't have stack garbage left in there for on-stack modes.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-2-ville.syrjala@linux.intel.comReviewed-by: NAndrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>

Initial version of guest backed objects in the host had some performance
issues that made using surface-dma's instead of direct copies faster.
Surface dma's force a migration to vram which at best is slow and at
worst is impossible (e.g. on svga3 where there's not enough vram
to migrate fb's to it).

Slowly migrate away from surface dma's to direct copies by limiting
their usage to systems with more than 32MB of vram.
Signed-off-by: NZack Rusin <zackr@vmware.com>
Reviewed-by: NMaaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: NMartin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-9-zack@kde.org

SVGAv3 deprecates legacy interrupts and adds support for MSI/MSI-X. With
MSI the driver visible side remains largely unchanged but with MSI-X
each interrupt gets delivered on its own vector.

Add support for MSI/MSI-X while preserving the old functionality for
SVGAv2. Code between the SVGAv2 and SVGAv3 is exactly the same, only
the number of available vectors changes, in particular between legacy
and MSI-X interrupts.
Signed-off-by: NZack Rusin <zackr@vmware.com>
Reviewed-by: NMartin Krastev <krastevm@vmware.com>
Reviewed-by: NMaaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220307162412.1183049-1-zack@kde.org

Transition to drm_mode_fb_cmd2 from drm_mode_fb_cmd left the structure
unitialized. drm_mode_fb_cmd2 adds a few additional members, e.g. flags
and modifiers which were never initialized. Garbage in those members
can cause random failures during the bringup of the fbcon.

Initializing the structure fixes random blank screens after bootup due
to flags/modifiers mismatches during the fbcon bring up.

Fixes: dabdcdc9 ("drm/vmwgfx: Switch to mode_cmd2")
Signed-off-by: NZack Rusin <zackr@vmware.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Reviewed-by: NMartin Krastev <krastevm@vmware.com>
Reviewed-by: NMaaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-7-zack@kde.org

Mesa3D loaders require knowledge of the devices PCI id. SVGAv2 and v3
have different PCI id's, but the same driver is used to handle them both.
To allow Mesa3D svga driver to be loaded automatically for both SVGAv2
and SVGAv3 make the kernel return the PCI id of the currently running
device.
Signed-off-by: NZack Rusin <zackr@vmware.com>
Reviewed-by: NMartin Krastev <krastevm@vmware.com>
Reviewed-by: NMaaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-6-zack@kde.org

Port of the vmwgfx to SVGAv3 lacked support for fencing. SVGAv3 removed
FIFO's and replaced them with command buffers and extra registers.
The initial version of SVGAv3 lacked support for most advanced features
(e.g. 3D) which made fences unnecessary. That is no longer the case,
especially as 3D support is being turned on.

Switch from FIFO commands and capabilities to command buffers and extra
registers to enable fences on SVGAv3.

Fixes: 2cd80dbd ("drm/vmwgfx: Add basic support for SVGA3")
Signed-off-by: NZack Rusin <zackr@vmware.com>
Reviewed-by: NMartin Krastev <krastevm@vmware.com>
Reviewed-by: NMaaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-5-zack@kde.org

Capabilities were logged at the end of initialization so any early errors
would make them not appear in the logs. Which is also when they're needed
the most.
Print the the capabilities right after fetching them, before the init
code starts using them to make sure they always show up in the logs.
Signed-off-by: NZack Rusin <zackr@vmware.com>
Reviewed-by: NMartin Krastev <krastevm@vmware.com>
Reviewed-by: NMaaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-4-zack@kde.org

The results of the legacy display unit initialization were being silently
ignored. Unifying the selection of number of display units based
on whether the underlying device supports multimon makes it easier
to add error checking to all paths.

This makes the driver report the errors in ldu initialization paths
and try to recover from them.
Signed-off-by: NZack Rusin <zackr@vmware.com>
Reviewed-by: NMartin Krastev <krastevm@vmware.com>
Reviewed-by: NMaaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-3-zack@kde.org